Vonino Jax X - flashing stock rom with instructions [Tested] - General Questions and Answers

This is not a question but instructions on how to flash this very rare phone (I could not find anything about this anywhere)
basically the company who makes it actually provides all the files but they are not easy to find
if you know what to do.. the ftp is located here
ftp://ftp.vonino.org/public/Firmware/
if you don't, continue on..
1. download the USB drivers and install them (sounds easier than it actually is)
here are some instructions from the company but they are in romanian
ftp://ftp.vonino.org/public/Firmwar...MTK/Vonino procedura actualizare software.pdf
but I can break it down for you (if you are on windows 10 x64 like): (info from here with some changes)
1.1 disable Windows 10 - 64 bit driver signature enforcement
- Click on Start then on Settings
- Click on Update & security then in the left pane click on Recovery
- Under Advanced startup click on Restart now button (you might wanna write the next parts on paper)
- Click on Troubleshoot then on Advanced options
- Click on Startup Settings then on Restart button
- The computer will restart with the Startup Settings screen
- To disable the driver signature enforcement until next restart press on number key 7 or F7 on your keyboard.
- wait for windows to start ..
1.2 install MTK VCOM USB Drivers
(I actually did this two times and will explain the two methods)
- download drivers from here https://www.androidfilehost.com/?fid=24269982087012126 and extract to a folder (1)
- download drivers from here http://ftp.vonino.org/public/Firmware/01_GENERAL_DRIVERS_FOR_MTK/ (Driver_Auto_Installer_v1.1228.00.rar) and extract to a folder (2)
ALTERNATIVELY to this next section you can just right click the inf file and click install.
- go to device manager (in w10 u can right click the start button and select it from the list)
- here select your computer THEN go to Action -> add legacy hardware
- On the Welcome to the Add hardware Wizard window click on Next button
- Select Install the hardware that I manually select from a list (Advanced) and then click on Next button
- Click on Show All Devices then on Next button
- In the Add Hardware window click on Have Disk… button
- In the Install From Disk windows click on Browse… button
- In the next window – Locate file – browse for the folder (1) that you have extracted on the desktop at the beginning
- Select the version of the driver according to your Windows 10 version – for 64 its "Windows 10 x64 MTK USB Drivers" (for 32 its Windows 10 x86 MTK USB Drivers)
- Click the OK button to load the driver
- From the list of drivers select MTK USB Port and click on Next button
- If a red warning window will open, click on Install this driver software anyway
- Now remove the device that was installed but leave the drivers in the operating system. (To do that in the Device Manager window expand Ports (COM & LPT) section, Right-click and click Uninstall on the MTK USB Port, making sure in the Confirm Device Uninstall window, that the box Delete the driver software for this device is empty)
- do this again for the other driver
- just this time browse for this folder Driver_Auto_Installer\SmartPhoneDriver\x64\Infs\ (or x86...)
- and select this file: usbvcom.inf
- then pick the first item.. DA USB VCOM Port
2. Download SP-Flash-Tool from ftp://ftp.vonino.org/public/Firmware/02_GENERAL_FLASH_KIT/SP-Flash-Tool-v5.1532.00.rar or http://tehnotone.com/download-sp-flash-tool-v3-v5-latest-versions/ and extract it
3. Download the latest stock ROM here
http://ftp.vonino.org/public/Firmware/Vonino_Smartphones/Jax_X/
- extract the contents of the zip file to a folder !
4. Flash the phone (https://androidmtk.com/flash-stock-rom-using-smart-phone-flash-tool)
so in order to do the actual flash
- turn off the phone and remove the battery (dont attach any cables to it yet)
- open flash_tool.exe
- select Firmware upgrade from the dropdown
- browse for the Download Agent and select the MTK_AllInOne_DA.bin in the SP-Flash-Tool folder.
- click on the Scatter-loading button and browse for the MT6580_Android_scatter.txt file located in the rom folder you extracted.
- click on the Download button
- connect the phone to the computer using the USB cable (with or without battery but it should be turned off)
- press the volume up and volume down buttons at the same time (I think this is optional, just wait and see if the download starts if not press the buttons)
- leave it to upload the new firmware, once its done a green button will appear
- close the flash tool and disconnect the cable
- start the phone and wait (for me it took about 7 minutes) but this will only happen the first time
hope this helps
ps: related to how I got into this predicament, if you gonna root your phone using Kingroot (it will work) DONT use SuperSuMe to try to remove Kingroot but keep root just coz the adds in the lock screen annoy you, it will boot loop your phone..
ps2: I hope Kingroot and all the other chineseroot ***** go bankrupt .. trying to brick my phone ..

Thank you so much. It wasnt easy but it worked perfect. Thank you for very detailed instructions it helped a lot. God bless you!

Can this phone support Android 7? I saw on the chinese shops that android 7 is rolling out on some MTK devices with 1GB of RAM?

Related

[Q] Rooting doesn't work? on a Spica

So I think I may be bricked....
I always had issues installing the drivers for my Spica (Portal here) on my Win7 laptop, but eventually I sorted it out so that Odin would pick it up and I got a pass from Leshak's kernel.
It was operational until I tried installing the firmware; the one that I had packaged with the kernel couldn't install Busybox. I tried a few other firmwires; an older one (which I had to re-root using the spica.ops rather than spica_jc3), CM 7 and CM 7 from this kitchen rom thing.
Those three all returned something like "Could not format system"
So assumedly recovery doesn't actually have root access, and I have tried rerooting it using Odin to no avail.
Any advice? Could it be drivers, is there an alternative PDA file I could use, am I doing a setting in Odin wrong?
Thanks!
Have you read that ? :
Code:
Prerequisites
- Android 2.1 Firmware Login - (Please register to download)
- Odin Multi Downloader 4.03 Odin4_03-Spica_ops.zip
- Spica Drivers Deposit Files (If it doesn't work install Kies and quit Kies when you need to flash)
Or get http://www.strefapc.pl/download/firmware/USB_Driver.rar .This is samsung's USB driver that comes with KIES
- MicroUSB Cable
- Fully Charged Phone
Warning: DATA WILL BE LOST
A more detailed guide can also be found here written by Lorenz (This 3 flash method will also solve any 0KB issues)
Samsung I5700 Galaxy Spica Android 2.1 Flashing Guide | All About Web & Mobile Application Development
1. Backup all your data, copy down your APN settings etc (You can use backup apps which save those into your SD card)
2. Do a factory reset (Menu/App Drawer -> Settings -> Privacy -> Factory data reset)
3. Power off the phone, remove your SIM card and SD Card
4. Press and hold Volume Down, Camera and End Call buttons until you see "Downloading... DO NOT TURN OFF TARGET" (Flash Mode)
5. Connect the phone to your PC (It should start prompting for the drivers)
5-1. For Drivers choose "Select from a list or specific location (Advanced)"
5-2. Select the files that was extracted from "Spica Drivers" (If it fails, unplug the phone and install Kies, quit Kies then plug the phone back)
6. Run Odin Multi Downloader (For Vista and Win7 users please Right click and Run As Administrator) [A yellow box with a COM port should show up if connected correctly]
7a. If the zip you downloaded for Android 2.1 Firmware only contains 1 file check "One Package" and click on One Package to select that file you extracted
7b. If the zip you downloaded for Android 2.1 Firmware only contains many files click on each of the option and choose the files accordingly.
8. Select OPS and select the ops file that came with Odin Multi Downloader (It should be 85 bytes)
9. Select Start
10. The phone will start flashing and automatically restart (If it gets stuck remove the battery and set to flash mode and try again)
Note: it can take a while after it restarts.
11. Please check the storage and ensure it is not 0KB (Menu/App Drawer -> Settings -> SD card & phone storage -> Available space
If you have 0KB please follow this guide written by Lorenz
Samsung I5700 Galaxy Spica Android 2.1 Flashing Guide | All About Web & Mobile Application Development
And that?
Code:
Prerequisites
- Android 2.1
- Odin Multi Downloader 4.03 Odin4_03-Spica_ops.zip
- LK2.08 Kernel by LekshaK, Select "Download: i5700_LK2-08_PDA.7z" from http://forum.samdroid.net/f9/lk2-08-original-firmwares-root-new-superuser-wifi-tether-bb-12-07-2010-a-1193/
- Spica Drivers Deposit Files (If it doesn't work install Kies and quit Kies when you need to flash)
- MicroUSB Cable
- Fully Charged Phone
1. Backup all your data
2. Power off the phone, remove your SIM card and SD Card
3. Press and hold Volume Down, Camera and End Call buttons until you see "Downloading... DO NOT TURN OFF TARGET" (Flash Mode)
4. Connect the phone to your PC (It should start prompting for the drivers)
4-1. For Drivers choose "Select from a list or specific location (Advanced)"
4-2. Select the files that was extracted from "Spica Drivers" (If it fails, unplug the phone and install Kies, quit Kies then plug the phone back)
5. Run Odin Multi Downloader (For Vista and Win7 users please Right click and Run As Administrator) [A yellow box with a COM port should show up if connected correctly]
6. Select PDA and choose LK2-08 PDA file. (You have to extract i5700_LK2-08_PDA.7z)
7. Select OPS and select the ops file that came with Odin Multi Downloader (It should be 85 bytes)
8. Select Start
9. The phone will start flashing and automatically restart
10. You will then see a screen with green text, select the 1st option and restart the phone if you don't intend to do anything.
11. After restarting your phone should have a SamdroidTools and Superuser Permissions in the app drawer.
I never had a problem with flash spica using Odin. The drivers are compatibile with Win7 - i used Win7 64bit myself
Had a read through and it's everything I've done already!
Note: Recovery can't clear the dalvik cache or wipe the SD card either - seems like a permissions kind of thing
So maybe option "fix permission" could help.
You can find it in a advanced settings in recovery.
You can also try flash in Odin cyanogenmod 8.3 for odin. Is avaible on samdroid somewhere.
Sent from my HTC Desire using Tapatalk

[Q] MT65xx - Windows 8

HI everyone.
anybody can help me that can windows 8.1 Enterprise Build 9431 supports MT65xx USB Drivers (MT65xx Android Driver)?
bahmandamia6982 said:
HI everyone.
anybody can help me that can windows 8.1 Enterprise Build 9431 supports MT65xx USB Drivers (MT65xx Android Driver)?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2180436
Found some working link tried this guide
http://androidurdu.net/download-mt65xx-android-drivers-windows-7-vista-xp-x86-x64-amd/
if it help tell me
Yes it does support Windows 8.1
I flashed some MT65xx devices using Windows 8.1 using SP Flash Tool
But in order to install the drivers you have to disable driver signature enforcement in Windows.
You can find numerous tutorials on the internet teaching you how to do that with pictures. Use Google
but here's an easy way :
1) Put your mouse on the upper right corner so the menu appears.
2) Choose Settings.
3) While holding the SHIFT button on your keyboard , use your mouse to choose Power then Restart.
4)Choose Troubleshoot --> Advanced Options --> Startup Settings --> Restart.
5) After your computer restarts and shows you a list of options press F7 on your keyboard.
6) Wait until it boots and then install MTK drivers you can do that by connecting the device then opening device manager and clicking right click update ..choose browse ..and browse to your MTK drivers directory then click next.
I don't think he was asking for the tutorials, but for the actual drivers!

[30.08.2014][ROM] JXD S7800B 8GB - CyanogenMod 11 Kitkat (With Power/Sleep fix)

Thought I would give people a heads up in case some wasn't aware about the beta of a ported CM11 rom. Seems great so far
ROM Download:
http://www.arctablet.com/blog/forum/crewrktablets-rk3188-entwicklung-customroms-development-croms/jxd-s7800b-gamepad-8gb-kitkat-cyanogenmod-11-rom/
Rom Installation:
1. Download Rockchip Batch Tool 1.7: http://www.cloudstor.es/file/m1_OTM0OA/
2. Connect your S7800B to your computer via USB 2.0 (avoid USB 3.0 ports).
3. Power up your device and run the file RKBatchTool.exe (requires administrator) on your computer.
4. You'll note the tool shows a pink color indicating the status (device is connected).
5. Click the "Switch" button and your device will reboot. Install drivers via Device Manager.
6. Press the "Reset" button your device, wait for it to boot up.
7. Again, click the "Switch" button, this time the area above will turn green - programming mode ready (if it doesn't you didn't install the driver).
8. Select the desired flash image file (.img) and press "Restore".
Power Button/Sleep Fix (RK3188-T users):
For those people who have the power button/sleep bug in most custom roms (RK3188-T users) you will also need to flash the extracted kernel.img from Webclaws 2G/SPECIAL rom.
Kernel.img/Flash tool:
http://boards.dingoonity.org/jxd-devices/%28kernel-only%29-powersleep-fix-for-jxd-s7800-%28rk3188-t%29/

got a brick installing global 12.0.10.0

i've got a hardbrick after installing global 12.0.10.0.
i can't boot into fastboot or recovery, it's just a black screen. adb and xiaomitools v2 not recognising it whatsoever
it vibrates if you hold voldown and power, but nothing happens. is it dead?
Ye thats a hardbrick,
start by installing this
REDMI+9C+NO+AUTH.zip
drive.google.com
Then unzip it and install :
1. New QcomMtk_Driver_Setup_V2.0.1.1
2. libusb-win32-devel-filter-1.2.6.0
After installing libusb-win32.....) at the end of the installation there will be a check box called " launch filter installer wizard". Check the box and hit ok
A new window will appear with 3 checkboxes, click on "Install a device filter" and click next.
A new window will appear and there will be a list of ID's depending on what you have installed, now carefully observe what ID's you have.
Now connect your phone and hold the + and - button together and for second youll see the libusb window update and a new device will be added to the list, it will be named MediaTek USB Port_Vxxxx), quickly click on it and hit the install button (SOMETIMES the device might NOT show as mediatek port and something as usb device, so make sure to select the right one.)
then open the bypass tool, click bypass and then repeat the process by holding the + and - button together and the bypass tool will show protection bypassed.
then open sp tool find the scatter file in your fastboot rom (official MIUI Rom)
you can get the rom from here:
https://xiaomifirmwareupdater.com/ (Make sure to install the fastboot version and not the recovery one.)
the DA (Download Agent) and auth file are located in the zip itself .
make sure to select firmware upgrade and then flash it.
Gigaachad said:
Ye thats a hardbrick,
start by installing this
REDMI+9C+NO+AUTH.zip
drive.google.com
Then unzip it and install :
1. New QcomMtk_Driver_Setup_V2.0.1.1
2. libusb-win32-devel-filter-1.2.6.0
After installing libusb-win32.....) at the end of the installation there will be a check box called " launch filter installer wizard". Check the box and hit ok
A new window will appear with 3 checkboxes, click on "Install a device filter" and click next.
A new window will appear and there will be a list of ID's depending on what you have installed, now carefully observe what ID's you have.
Now connect your phone and hold the + and - button together and for second youll see the libusb window update and a new device will be added to the list, it will be named MediaTek USB Port_Vxxxx), quickly click on it and hit the install button (SOMETIMES the device might NOT show as mediatek port and something as usb device, so make sure to select the right one.)
then open the bypass tool, click bypass and then repeat the process by holding the + and - button together and the bypass tool will show protection bypassed.
then open sp tool find the scatter file in your fastboot rom (official MIUI Rom)
you can get the rom from here:
https://xiaomifirmwareupdater.com/ (Make sure to install the fastboot version and not the recovery one.)
the DA (Download Agent) and auth file are located in the zip itself .
make sure to select firmware upgrade and then flash it.
Click to expand...
Click to collapse
hold the + and - button together and for second youll see the libusb window update and a new device will be added to the list,
yes, it does appear, but not for a second. it disappears instantly, i can't even read the title of it
Gigaachad said:
Ye thats a hardbrick,
start by installing this
REDMI+9C+NO+AUTH.zip
drive.google.com
Then unzip it and install :
1. New QcomMtk_Driver_Setup_V2.0.1.1
2. libusb-win32-devel-filter-1.2.6.0
After installing libusb-win32.....) at the end of the installation there will be a check box called " launch filter installer wizard". Check the box and hit ok
A new window will appear with 3 checkboxes, click on "Install a device filter" and click next.
A new window will appear and there will be a list of ID's depending on what you have installed, now carefully observe what ID's you have.
Now connect your phone and hold the + and - button together and for second youll see the libusb window update and a new device will be added to the list, it will be named MediaTek USB Port_Vxxxx), quickly click on it and hit the install button (SOMETIMES the device might NOT show as mediatek port and something as usb device, so make sure to select the right one.)
then open the bypass tool, click bypass and then repeat the process by holding the + and - button together and the bypass tool will show protection bypassed.
then open sp tool find the scatter file in your fastboot rom (official MIUI Rom)
you can get the rom from here:
https://xiaomifirmwareupdater.com/ (Make sure to install the fastboot version and not the recovery one.)
the DA (Download Agent) and auth file are located in the zip itself .
make sure to select firmware upgrade and then flash it.
Click to expand...
Click to collapse
um, so, it's dead?
ignaty_b said:
hold the + and - button together and for second youll see the libusb window update and a new device will be added to the list,
yes, it does appear, but not for a second. it disappears instantly, i can't even read the title of it
Click to expand...
Click to collapse
hmm try it again, keep on holding the volume button, if not then we can try another method (MTK client)
Gigaachad said:
hmm try it again, keep on holding the volume button, if not then we can try another method (MTK client)
Click to expand...
Click to collapse
fixed it by dissasembling phone and deattaching battery. then did all the steps again.

Question [Guide] How to use SP Flash tool [Windows Only!]

Today I'm going to write how to use so flash tool for OnePlus Nord CE 2
Before you begin download: https://drive.google.com/file/d/1fL8qqu_pBK1YU5xbgugLax7ZKU-k3ex7/view?usp=drivesdk
This includes sp flash tool for our MTK version, drivers and MTK Bypass files!
Requirements: PC or Laptop
Internet connection
USB cable
Take a backup of your data, Just in case if any error happens.
Windows Method
Requirements:
SP_Flash_Tool_5.2112.00.zip
drive.google.com
Decrypted OFP for our device! You can find it on Google!
Install Python from Windows Store
https://sourceforge.net/projects/li...ibusb-win32-devel-filter-1.2.6.0.exe/download
libusb-win32 - Having Issues? Click Here
Steps:
1) Extract the zip
2) Use the bundled QcomMtk_Driver_Setup_3.1.9.exe from the zip. for MTK Preloader USB VCOM driver it should be installed within windows 8 and above?
3)Download this file and install it, after installing power off phone and connect to pc while holding Vol+- (don't leave the buttons after connecting) . You might need this driver as well if it's not detected.
Press next, connect your device to PC while holding Vol+- buttons (your device needs to be powered off, and don't leave the buttons) and you will see the mtkdriver down below. Install it.
Choose MediaTek USB Port and install it.
4)Then run the brom.bat under Bypass folder (spflashtool/mtk-bypass/bypass). (for Linux, When available) use command: python3 mtk payload to start the BROM exploit!
5) Now power off the phone and connect the phone while holding volume + and - (Don't leave the buttons until the bypass is done)
6)After the above step Go into Flash Tool folder and open the SPFlash tool and launch flash_tool.exe
7) Click on Options>Options and go to Connections and select UART and set Baud Rate to 921600
8)Now in Sp flash tool select the scatter file which you have extracted from Partitions.zip and make sure that prealoder, lk, and lk2 is selected.
9) You don't need to select auth file as authorization is disabled. Once you do it, it should look like this. ALWAYS MAKE SURE DOWNLOAD ONLY MODE IS SELECTED! DON'T SELECT OTHER MODES!
Make SURE "Download Only" is selected. Don't select ANYTHING ELSE! You will lose your IMEIs, Serial Numbers, Capability of Hardware Attestation etc. if you choose "Format data + Download" make SURE you selected "Download Only".
10) Now, you can start downloading with the button and after that a checkmark will appear. You can reboot your phone
After flashing it should look like this. Download has been complete.
Credits:
B. Kerler for MTK Bypass
@Saksham Antil (aka Tony Stark) for original guide
Reserved for updates:
When Linux Version will be available for our devices it will be posted
Edit it looks like it is, only my who uses old source

Categories

Resources