Hello,
I downloaded the latest Malaysk software from the repository, tried installing it with the second method (from "System update") along with wiping flash.
Now this KGL MTCD unit is bricked, there is no response from it, aside from the buttons lighting up.
How to unbrick it?
can you get in to the Recovery?
Never change a running system if you are not knowing what you do
NiTr0Us said:
can you get in to the Recovery?
Never change a running system if you are not knowing what you do
Click to expand...
Click to collapse
Yes, if you can get into recovery you can just flash. In the thread it clearly says that you have to get into recovery BEFORE flashing (because you have to flash twice due to partitioning).
Ask your vendor how you can get into recovery if the usual way (pressing power + reset at the same time, then releasing reset and pressing power a single time again) wont work.
Just get in recovery and use the Wipe data / reset cache option, then flash it again from recovery.
Reboot and enjoy
If I could get into recovery I wouldn't be posting this topic.
Recovery doesn't work.
What now?
TO get into recovery,
when it should boot up, press and hold power.
THen it will force shutdown. Next boot brings up recovery for me!
same here bro
the unit is totaly dead, cant go to recovery...
hashtowent said:
TO get into recovery,
when it should boot up, press and hold power.
THen it will force shutdown. Next boot brings up recovery for me!
Click to expand...
Click to collapse
Like I said, I cannot get into recovery. The unit doesn't boot up at all.
Oh well, I'll just replace the motherboard.
for all of you with bricks. lets do some experiments
Can you guys hook it up to a computer and see if the computer can read it. If you can you should be able to adb the rom back.
http://www.rockchip.nl/downloads/
Make sure you have the drivers. If you can successfully read it then you can use RKTools or adb.
transitoyspace said:
for all of you with bricks. lets do some experiments
Can you guys hook it up to a computer and see if the computer can read it. If you can you should be able to adb the rom back.
Make sure you have the drivers. If you can successfully read it then you can use RKTools or adb.
Click to expand...
Click to collapse
hahahah
i do this work without read you, i came here to post the solution
with the rk3188 drivers + " RK Batchtool" i firm the unit in 3 mins. its works ok
Can you share the steps? I have a bricked unit also.
transitoyspace said:
for all of you with bricks. lets do some experiments
Can you guys hook it up to a computer and see if the computer can read it. If you can you should be able to adb the rom back.
http://www.rockchip.nl/downloads/
Make sure you have the drivers. If you can successfully read it then you can use RKTools or adb.
Click to expand...
Click to collapse
Even if MCU has changed we can recover to factory settings??
Because in my HU i can go to reboot display but appeared the message
Cant mount...../device/block/.../.../(device block required).
I had similar issues
Trimis de pe al meu SM-G930F folosind Tapatalk
---------- Post added at 03:09 PM ---------- Previous post was at 03:05 PM ----------
Fixed by removing the power connector and keeping power button pressed and restored power supply without ACC in order to establish usb connection with my laptop.
By using RK batchtool, I managed to restore my unit.
Trimis de pe al meu SM-G930F folosind Tapatalk
adibxx said:
I had similar issues
Trimis de pe al meu SM-G930F folosind Tapatalk
---------- Post added at 03:09 PM ---------- Previous post was at 03:05 PM ----------
Fixed by removing the power connector and keeping power button pressed and restored power supply without ACC in order to establish usb connection with my laptop.
By using RK batchtool, I managed to restore my unit.
Trimis de pe al meu SM-G930F folosind Tapatalk
Click to expand...
Click to collapse
But I suppose that you loaded on RK batch tool the factory Mcu and firmware right?
Because in my case I can't find factory mcu and seller doesn't know to provide me the factory software.
So with batchtool what can I do?
Qwerty11111 said:
But I suppose that you loaded on RK batch tool the factory Mcu and firmware right?
Because in my case I can't find factory mcu and seller doesn't know to provide me the factory software.
So with batchtool what can I do?
Click to expand...
Click to collapse
Factory firmware failed checksum. So, I used Malaysk ROM. The latest version failed to erase screen, but, the previous one booted successfully. Initially I tries to use recovery and ended up in brick device. Only rear camera was working. The devices stacked to Malaysk ROM screen and no stand by if ACC OFF.
Trimis de pe al meu SM-G930F folosind Tapatalk
Hi there,
Trying to install Malaysk ROM on an MTCD-KGL unit, I managed to get it bricked. As in... no screen, no sound, no Recovery, nothing! Couldn't link it to PC, nothing. The reset + volume button combination did not work for me to enter Recovery. My screen was all dead.
So... After some research, I used "Rockchip Upgrade Disk Tool" v1.4 and the unit booted from the sd card inserted in the GPS slot (Guide here: http://wiki.radxa.com/Rock/SD_upgrading ).
In theory, the unit should have started automatically upgrade from the SD but in my case it presented an error requesting me to remove the sd card. After removal, the unit went to Recovery boot menu. Still a success.
When the Recovery menu appeared, I inserted an sd card with dupdate.img on it in the GPS slot and selected install from menu. Unfortunately, the unit kept saying that it does not find the sd card. Tried the other sd slot but same error.
Success came from USB port. One of the two from the back of the unit, not the one in front. I put the dupdate.img and dmcu.img on an usb stick and inserted in one of the usb ports from the back. The unit recognized the stick and started the update process.
Now the unit is working.
If someone is interested, I can provide MCU and ROM (version from October 2016).
Hope this helps someone.
kufu said:
Hi there,
Trying to install Malaysk ROM on an MTCD-KGL unit, I managed to get it bricked. As in... no screen, no sound, no Recovery, nothing! Couldn't link it to PC, nothing. The reset + volume button combination did not work for me to enter Recovery. My screen was all dead.
So... After some research, I used "Rockchip Upgrade Disk Tool" v1.4 and the unit booted from the sd card inserted in the GPS slot (Guide here: http://wiki.radxa.com/Rock/SD_upgrading ).
In theory, the unit should have started automatically upgrade from the SD but in my case it presented an error requesting me to remove the sd card. After removal, the unit went to Recovery boot menu. Still a success.
When the Recovery menu appeared, I inserted an sd card with dupdate.img on it in the GPS slot and selected install from menu. Unfortunately, the unit kept saying that it does not find the sd card. Tried the other sd slot but same error.
Success came from USB port. One of the two from the back of the unit, not the one in front. I put the dupdate.img and dmcu.img on an usb stick and inserted in one of the usb ports from the back. The unit recognized the stick and started the update process.
Now the unit is working.
If someone is interested, I can provide MCU and ROM (version from October 2016).
Hope this helps someone.
Click to expand...
Click to collapse
Hi,
Before you saved your unit, did button light light up or not? I have same issues like you had, but unfortunatelly I can't debrick my unit. Could you provide me all files (links), which helped you to brought it alive, please? Thanks.
Hello! At my unit, yes the buttons light was on. There is a link in my post and also you can read here: http://forum.xda-developers.com/showpost.php?p=68717214&postcount=877
Hope you solve your problem.
Qwerty11111 said:
But I suppose that you loaded on RK batch tool the factory Mcu and firmware right?
Because in my case I can't find factory mcu and seller doesn't know to provide me the factory software.
So with batchtool what can I do?
Click to expand...
Click to collapse
I had factory firmware but didn't work.
I used the latest one.
Trimis de pe al meu SM-G930F folosind Tapatalk
I did a walkthrough with pics on how i recovered my unit.
https://forum.xda-developers.com/an...nt/eonon-ga6164f-mtcd-rk3188-mtcdkld-t3594368
Related
I was tinkering with my phone, did not know what I was doing, tried to flash a stock recovery to replace twrp, most probably was flashing the wrong version as the recovery was not booting, (being the noob i am) also flashed recovery.IMG.header and now my phone is stuck in bootloader with error message
Please update system again (in red color)
And under the gutted Android logo
Something about boot image being corrupted (again in red)
and an error number.
Adb does not recognize my device, actually even device manager does not recognize it any more.
Tried to force install drivers and any other method I could think of or read here on XDA forums. Still the same
So, is there a room of developers or tech enthusiasts who can help me to try to solve this problem.
Thanks
This is the screen I get, battery does not charge, no matter how hard I try, I can not enter a bootloader without error message, and my PC does not even recognize my device when I connect it. Mean windows device manager does not show any changes in hardware
muradulislam said:
I was tinkering with my phone, did not know what I was doing, tried to flash a stock recovery to replace twrp, most probably was flashing the wrong version as the recovery was not booting, (being the noob i am) also flashed recovery.IMG.header and now my phone is stuck in bootloader with error message
Please update system again (in red color)
And under the gutted Android logo
Something about boot image being corrupted (again in red)
and an error number.
Adb does not recognize my device, actually even device manager does not recognize it any more.
Tried to force install drivers and any other method I could think of or read here on XDA forums. Still the same
So, is there a room of developers or tech enthusiasts who can help me to try to solve this problem.
Thanks
Click to expand...
Click to collapse
first of all download the stcok firmware that suits your device, then follow one of these methods.
1. Prepare a capacity of more than 2GB SD card
2. confirm the presence UPDATE.APP dload file directory, then the whole dload copied to the SD card root directory. SDcard\dload\UPDATE.APP
3. Press the volume button down, press power button, volume up and down keys to sustained 10 seconds, the phone will automatically trigger an increase in the SD card.
.
Second Methods : Upgrade normal
1. Prepare a capacity of more than 2G SD card, it is recommended to use Micro SD class 8 and up
2. Format SD card (optional).
3. confirm the presence UPDATE.APP dload file directory, then the whole dload copied to the SD card root directory.
4. SD card into the phone is turned on, go to “Settings”, select “Settings – Phone Upgrades – System Software Update – Local Upgrade.” Based on the dialogue choose whether to back the data, and finally select the “Upgrade” button to start the upgrade.
tell me if it works.
I tried this method once, did not work. Will give it another try and will let you know.
muradulislam said:
I tried this method once, did not work. Will give it another try and will let you know.
Click to expand...
Click to collapse
I hope it works
@muradulislam did you solve it buddy? By doing the three button reset?
Nope
Still get the same screen no matter what I do
How about flashing firmware?! @DigiGoon
Try this method buddy:
Download your phone's latest firmware and extract system.img, boot.img, recovery.img, cust.img from UPDATE.APP using Huawei Update Extractor tool.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
Flash recovery first, using this command.
Code:
fastboot flash recovery recovery.img
Flash all other extracted files similarly firing these commands.
Code:
fastboot flash boot boot.img
fastboot flash cust cust.img
fastboot flash system system.img
After doing this put that very UPDATE.APP from which you extracted the files in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
I already tried pressing the volume down button and connecting to PC simultaneously, also tried power + volume down.
Also tried power+volume up, 3 btn restart.
Nothing works. It does not boot into bootloader no matter what i try and my PC does not recognize it at all in the present state so no chance for adb to recognize it.
Also installed Huawei Usb drivers, kouch's universal drivers.
I am thinking that it's a hard brick looking like a soft brick.
I saw a guide somewhere saying that I need to physically pry open the phone and do some meddling with the hardware to get it fixed but I am not into that so just closed the page and never tried to find it again.
Well, that's the whole sad story :crying:
muradulislam said:
I already tried pressing the volume down button and connecting to PC simultaneously, also tried power + volume down.
Also tried power+volume up, 3 btn restart.
Nothing works. It does not boot into bootloader no matter what i try and my PC does not recognize it at all in the present state so no chance for adb to recognize it.
Also installed Huawei Usb drivers, kouch's universal drivers.
I am thinking that it's a hard brick looking like a soft brick.
I saw a guide somewhere saying that I need to physically pry open the phone and do some meddling with the hardware to get it fixed but I am not into that so just closed the page and never tried to find it again.
Well, that's the whole sad story :crying:
Click to expand...
Click to collapse
Don't lose hope, try again
muradulislam said:
I already tried pressing the volume down button and connecting to PC simultaneously, also tried power + volume down.
Also tried power+volume up, 3 btn restart.
Nothing works. It does not boot into bootloader no matter what i try and my PC does not recognize it at all in the present state so no chance for adb to recognize it.
Also installed Huawei Usb drivers, kouch's universal drivers.
I am thinking that it's a hard brick looking like a soft brick.
I saw a guide somewhere saying that I need to physically pry open the phone and do some meddling with the hardware to get it fixed but I am not into that so just closed the page and never tried to find it again.
Well, that's the whole sad story :crying:
Click to expand...
Click to collapse
If it is still under warranty, I would try oficial support. They generally dont bother about installing recoveries, 3rd party ROMs...
Even if it is out of warranty, they could provide you a reasonable cheap repair. Better than fiddling inside and do some physical damage that could mean replacing the whole board.
zinko_pt said:
If it is still under warranty, I would try oficial support. They generally dont bother about installing recoveries, 3rd party ROMs...
Even if it is out of warranty, they could provide you a reasonable cheap repair. Better than fiddling inside and do some physical damage that could mean replacing the whole board.
Click to expand...
Click to collapse
Your idea seems to be the better solution :good:
Agreed with zinko_pt here, don't open it and try anything physically, instead throw it in a Huawei service center, they'll definitely help you.
zinko_pt said:
If it is still under warranty, I would try oficial support. They generally dont bother about installing recoveries, 3rd party ROMs...
Even if it is out of warranty, they could provide you a reasonable cheap repair. Better than fiddling inside and do some physical damage that could mean replacing the whole board.
Click to expand...
Click to collapse
I am thinking the same thing. Will try'em out now.
Its the Chinese version of honor 6 h60-L01 so was thinking of taking it to them whenever I visit China again.
May be I should try the local Huawei service center in Pakistan first but I am not so sure that they can solve it here...
muradulislam said:
I am thinking the same thing. Will try'em out now.
Its the Chinese version of honor 6 h60-L01 so was thinking of taking it to them whenever I visit China again.
May be I should try the local Huawei service center in Pakistan first but I am not so sure that they can solve it here...
Click to expand...
Click to collapse
It's worth a try though. They could tell you they can't repair it due to being a Chinese version, but they could also analyse the symptoms all tell you what repair is needed.
zinko_pt said:
It's worth a try though. They could tell you they can't repair it due to being a Chinese version, but they could also analyse the symptoms all tell you what repair is needed.
Click to expand...
Click to collapse
Nice. I will definitely do that now. Thanks.
muradulislam said:
Nice. I will definitely do that now. Thanks.
Click to expand...
Click to collapse
Well, today my son used my bricked honor 6 as a brick, its gone for good now, I guess
Sent from my PLK-L01 using XDA Labs
muradulislam said:
Well, today my son used my bricked honor 6 as a brick, its gone for good now, I guess
Click to expand...
Click to collapse
That's hilarious and sad at the same time, I hope you get a new device ASAP
muradulislam said:
Well, today my son used my bricked honor 6 as a brick, its gone for good now, I guess
Sent from my PLK-L01 using XDA Labs
Click to expand...
Click to collapse
So which one you are gonna get now?
Sent from my PLK-L01 using Tapatalk
After receiving my UL28N2 Joying head unit i managed to get root on the device according to this tutorial: http://forum.xda-developers.com/showpost.php?p=69648860&postcount=84
I bought this unit to be able to use Tom Tom on it. After first trying to install it failed and it says it was not able to get any connection to the Tom Tom service.
After that i found this tutorial to change the serial number and run Tom Tom: http://forum.xda-developers.com/and...lmight-tomtom-problem-solved-fw-mtcd-t3471075
It failed to install xposed framework. As last i wanted to installt he newest version of xposed found here: http://forum.xda-developers.com/showthread.php?t=3034811
I installed the xposed version and gave it root access to install the latest framework. From there it went wrong.
The device restarted and i saw the android logo (the green doll) after that the device rebooted again and now i am stuck at the android logo (white one).
I am able to get into recovery, used this tutorial for it: http://forum.xda-developers.com/showpost.php?p=69936773&postcount=4
Am i able to recovery it and how can i do this? I tried to copy the latest update from Joying to an usb stick and put the stick in when i am into recovery but nothing happens.
Hopefully one of you guys can help me with this.
Afaik there was no xposed available for the Intel units.
Try on the sdcard1 or the usb1. System should detect a new update
Enviado desde mi D6603 mediante Tapatalk
ikerg said:
Afaik there was no xposed available for the Intel units.
Try on the sdcard1 or the usb1. System should detect a new update
Enviado desde mi D6603 mediante Tapatalk
Click to expand...
Click to collapse
What exactly do you mean?
I tried to put the latest update on a usb stick and stick it in the device, boot into recovery but it does nothing.
Trying to start android with the usb stick attached does neither work.
I meant that ROm updates usually work only over sdcard1 or usb1...but if you tried....
Once booted into recovery can you select the option to restore/update from file?
Which options do you have?
Are you expecting that update file to be detected and installed automatically or did you try to navigate through the recovery options to update?
Enviado desde mi D6603 mediante Tapatalk
I do not see any options to select
Tried to follow this tutorial: http://forum.xda-developers.com/showpost.php?p=69936773&postcount=4
I made some pictures of what i see when i follow the tutorial.
First i see the android doll with some Chinese text without! and after a second i get another message with ! at the end.
I can press the home button and i get some red text with Error, wait here... or something like that.
I want to remove the xposed framework, after that android will run again.
I got a solution. Download the latest update from the joying website: https://www.carjoying.com/Joying-blog/59.html
Copy it to a usb stick that has been formatted as FAT32 and put it in the usb outlet that comes at the same side as the wifi antenna goes out.
Apply power and press the reset button. The device will so the same routine as updating. Wait for 20 minutes and it works again.
Perhaps this can help us further, if you don't damage the boot image you can always flash a new ROM with that usb port.
I had tried this same thing on Intel unit, let xposed framework pick which version, it got stuck on white android logo forever. I found putting my sdcard with the update files would work also without a keyboard. If I cut power to it and it failed to boot 3 times , on the fourth try it would show my car logo and in red letters underneath something like "failed to boot systemui after many attempts!" At that point it automatically searches sdcard or usb for the factory image to flash.
I too tried everything for tomtom go, but no success
Skater4599 said:
I had tried this same thing on Intel unit, let xposed framework pick which version, it got stuck on white android logo forever. I found putting my sdcard with the update files would work also without a keyboard. If I cut power to it and it failed to boot 3 times , on the fourth try it would show my car logo and in red letters underneath something like "failed to boot systemui after many attempts!" At that point it automatically searches sdcard or usb for the factory image to flash.
I too tried everything for tomtom go, but no success
Click to expand...
Click to collapse
If it does not work, I have a solution, send me a message
Cr4zyMan said:
If it does not work, I have a solution, send me a message
Click to expand...
Click to collapse
Can you help me? My android head unit being stuck at boot
hackergacon9x said:
Can you help me? My android head unit being stuck at boot
Click to expand...
Click to collapse
yes i can (joying head unit).
download the latest joying version from hare: https://www.carjoying.com/blog/joying-head-unit-after-sale-support/59.html
Extract all files to SD card (or USB Card).
Remove the power from the head unit
Connect the SD card to the head unit
Press the power button, connect the power (Do not leave the power button until you see any icon).
Cr4zyMan said:
yes i can (joying head unit).
download the latest joying version from hare: https://www.carjoying.com/blog/joying-head-unit-after-sale-support/59.html
Extract all files to SD card (or USB Card).
Remove the power from the head unit
Connect the SD card to the head unit
Press the power button, connect the power (Do not leave the power button until you see any icon).
Click to expand...
Click to collapse
My head unit that I buy is made in China. The hardware is like joying. I updated the android version 6.0 of joying, now my head has a "UI does not match" error, overlay screen and wrong resolution. Functions like radio, music ... working normally Can you downgrade to stock android 5.1.1? Can you please fix this bug or downgrade?
i have an erisin device, but when i was stuck on android logo, i had to reboot device and pull out both SD CARDs!
Afterwards it could boot into the system
hackergacon9x said:
My head unit that I buy is made in China. The hardware is like joying. I updated the android version 6.0 of joying, now my head has a "UI does not match" error, overlay screen and wrong resolution. Functions like radio, music ... working normally Can you downgrade to stock android 5.1.1? Can you please fix this bug or downgrade?
Click to expand...
Click to collapse
Did you fix this?
Hello
I have a Mate 7 L-09 and I am in the same situation of Sassan_Payehdar described in the his thread
Hi everyone,
I have a Huawei Mate 7 LT-09 16 gig, and I recently did these works:
1. The installed rom was android 6 B513.
2. I read a post in this forum (that is closed now) and updated it to B553 KingVIP Chinese through restoring nandroid TWRP backup.
3. After install I saw lots of bugs, so I wipe all partitions through advanced wipe in TWRP.
4. Then install marshmallow stock recovery using mobopx tool.
after that nothing works.
The USB drive just show hisuite CD-Rom and device not recognize for ADB Options in windows 7,8,8.1 and 10.
There is no recovery,
There is no option using combinations of the buttons vol+,Vol- and power.
I tried installing stock ROM through .app file and dload folder and still nothing works.
I tried Jtag and after lots of work, fastboot screen appears and reinstalling all versions of different recoveries and looks like the software is installing nowhere in neverland!, there is nothing!
I take my device to a technician and he said there is maybe no way to re-run the device. I really need help.
Apologize for poor English and thanks in advance help.
Click to expand...
Click to collapse
No bootloader, no recovery, no option using combinations of the buttons vol+,Vol- and power, no recognition by ADB on PC only huawei logo.
He tried Jtag to appear fastboot, but I never read anything about Jtag. Where can I find it and how to use it?
Sorry for my English.
Can somebody help me?
Thank you so much!!
Al
What happens when you enable your phone (after shutdown) with pressing power + volume up?
Also, what happens when you do the same but with power + volume down?
I would say that if it loads the logo you should be able to enter fastboot/recovery.
Focus on this first and what is your experience with using custom roms to give us an idea of what could be overlooked etc.
If you can load to fastboot and/or recovery let us know and we start from there.
Mother_Teresa said:
What happens when you enable your phone (after shutdown) with pressing power + volume up?
Also, what happens when you do the same but with power + volume down?
I would say that if it loads the logo you should be able to enter fastboot/recovery.
Focus on this first and what is your experience with using custom roms to give us an idea of what could be overlooked etc.
If you can load to fastboot and/or recovery let us know and we start from there.
Click to expand...
Click to collapse
Thank you very much for the answer......
Ok...
I can' t swich off the phone. When I press power off button it reboot and after a few seconds appears huawei logo and then nothing more happens.
When I try to press VOL- and power or VOL+ and power or any other combination of buttons it happens the same think written above: the phone reboot and after a few seconds appears huawei logo and stop.
I brought the phone to the huawei customer center and they told me it need to change motherboard to fix it but it is out of production. I brought it to two famous Chinese stores to fix phones here in Milano, but they couldn't do anything (so they said).
I would just like to retrieve the use of the phone. I saved all the data.
Thanks again for the help.
Al
verdiverdi said:
Thank you very much for the answer......
Ok...
I can' t swich off the phone. When I press power off button it reboot and after a few seconds appears huawei logo and then nothing more happens.
When I try to press VOL- and power or VOL+ and power or any other combination of buttons it happens the same think written above: the phone reboot and after a few seconds appears huawei logo and stop.
I brought the phone to the huawei customer center and they told me it need to change motherboard to fix it but it is out of production. I brought it to two famous Chinese stores to fix phones here in Milano, but they couldn't do anything (so they said).
I would just like to retrieve the use of the phone. I saved all the data.
Thanks again for the help.
Al
Click to expand...
Click to collapse
Not being able to to overcome the logo boot is unknown to me. Maybe the phone should still be able to be flashed!
I lack the knowledge, but to help out I share a link to someone having a similar issue. I will share the link at the end of this post.
If you are unable to connect to your phone and/or make it enter fastboot or recovery I have no idea if that means your phone is bricked.
For now, make sure you understand how to flash,boot,reset etc your phone, only to be sure you have tried all approaches.
Let us know if you did not succeed also so others can learn from this thread in the future
similar topic link -> https://forum.xda-developers.com/mate-7/help/mate-7-booting-t3585079
Mother_Teresa said:
Not being able to to overcome the logo boot is unknown to me. Maybe the phone should still be able to be flashed!
I lack the knowledge, but to help out I share a link to someone having a similar issue. I will share the link at the end of this post.
If you are unable to connect to your phone and/or make it enter fastboot or recovery I have no idea if that means your phone is bricked.
For now, make sure you understand how to flash,boot,reset etc your phone, only to be sure you have tried all approaches.
Let us know if you did not succeed also so others can learn from this thread in the future
similar topic link -> https://forum.xda-developers.com/mate-7/help/mate-7-booting-t3585079
Click to expand...
Click to collapse
Ok
that's unbelievable I was be able to access in fastboot&rescue mode....
I connected the device to my pc but ADB doesn't recognized it.
Now how can I do?
Many thanks
Al
I have same problem as u before, i managed to go to fastboot and then i installed a recovery but the probleme, i bring it into a repair store and the dude literally broke my sd card slot so now I'm really upset.
After that i wanted to make a restore to proposed backups in the firmware forum but nothing happend
Foxar26 said:
I have same problem as u before, i managed to go to fastboot and then i installed a recovery but the probleme, i bring it into a repair store and the dude literally broke my sd card slot so now I'm really upset.
After that i wanted to make a restore to proposed backups in the firmware forum but nothing happend
Click to expand...
Click to collapse
Good
now I am in this situation: I was able to install TWRP recovery for Marshmallow 3.0.2-0 Mate 7 by Mobopx v.2.1.
I chose this recovery beecause my last firmware was EMUI 4.0 (Marshmallow).
After I tried to apply this method: http://ministryofsolutions.com/2016...09tl10-bootloop-after-marshmallow-update.html, but it didn't work. After flashing I power on the phone and it try to boot (some times the animation start too for a bit) but then nothing. The phone reboot in recovery mode (this is a change compared to before).
Somebody has some ideas??
Thanks
Al
verdiverdi said:
Good
now I am in this situation: I was able to install TWRP recovery for Marshmallow 3.0.2-0 Mate 7 by Mobopx v.2.1.
I chose this recovery beecause my last firmware was EMUI 4.0 (Marshmallow).
After I tried to apply this method: http://ministryofsolutions.com/2016...09tl10-bootloop-after-marshmallow-update.html, but it didn't work. After flashing I power on the phone and it try to boot (some times the animation start too for a bit) but then nothing. The phone reboot in recovery mode (this is a change compared to before).
Somebody has some ideas??
Thanks
Al
Click to expand...
Click to collapse
Wonderful!!!!!!
I solved my problem!!!!!
I flashed a TWRP backup get from this forum and now my phone is working.
Thank you to everybody...
Al
I'm very happy for u, can u give me which one you choose for the backup
Foxar26 said:
I'm very happy for u, can u give me which one you choose for the backup
Click to expand...
Click to collapse
Go here
https://forum.xda-developers.com/mate-7/general/huawei-mt7-l09-l10-stock-firmware-ota-t3275784
and choose the appropriate TWRP backp. Flash it by TWRP recovery. It were very simple!!!.
Obviously you have have a working TWRP recovery.....
Hi
Hi all hope someone can help. My oneplus 1 was playing up a bit just lately so I thought I would give is a wipe and fresh install of a Sultan Rom that I had been using. Backed up using Titanium and Twrp to play it safe. Then like a complete novice (not the next stage up which is where I would put myself) I ticked all the check boxes and wiped. I now have no Operating System on the phone :crying: although I have a version of Twrp sitting on there.
So, off to google I trawled to find numerous posts threads and ways to get back up and running using fastboot, ADB sideloading etc. So after a day and a half of trying these methods and various images to download and flash I am no where near having a working phone.
I need help if one kind soul can help and walk me through the process of getting this phone back up and running.
Thanks for any help that comes this way.... Foz
TWRP is present, just copy paste a rom and gapps into the phone. Go into twrp, flash the rom and gapps and reboot.
Did you try this?
hi thanks for replying.
I've not been able to do as you suggest as the phone is not showing up in explorer where I copy/paste Rom/Gapps. The laptop is "seeing" the phone as there is an audible sound when it gets plugged into the USB socket and when using the fastboot command prompt, it throws a serial number at me. this is why I've tried to go down the ADB/Fastboot options of installing a Rom/IMG with no success
Install the drivers of ur phone on ur pc, download the stock rom cm13.1 from xda, and flash it.
---------- Post added at 11:44 PM ---------- Previous post was at 11:42 PM ----------
Or the other option is, get otg drive. Put rom there and flash.
I'm not having any luck with the first suggestion you gave. Every image that i am trying to flash results in some kind of error. I've even tried to put the most up to date version of Twrp on (3.2.1-0-bacon) but I'm not getting any joy with that. Even though I can "talk" to the phone in Fastboot mode I'm getting no joy. I'm thinking of re installing all the ADB set up again just to make sure
Your second suggestion is not an option for me at the minute as i don't have the kit to try it.
Thanks for you input though.
Try using a OTG cable with a thumb drive
adamfoz said:
hi thanks for replying.
I've not been able to do as you suggest as the phone is not showing up in explorer where I copy/paste Rom/Gapps. The laptop is "seeing" the phone as there is an audible sound when it gets plugged into the USB socket and when using the fastboot command prompt, it throws a serial number at me. this is why I've tried to go down the ADB/Fastboot options of installing a Rom/IMG with no success
Click to expand...
Click to collapse
maybe I missed something but you have to connect your phone to the PC when it is in recovery mode (when OPO is turned off press and keep pressed vol down + power button until you see TWRP logo). The pc should see your phone as an external drive, then you can move a ROM and Gapps and flash with TWRP.
-Pepe said:
maybe I missed something but you have to connect your phone to the PC when it is in recovery mode (when OPO is turned off press and keep pressed vol down + power button until you see TWRP logo). The pc should see your phone as an external drive, then you can move a ROM and Gapps and flash with TWRP.
Click to expand...
Click to collapse
You're not missing anything, I don't think. The phone is booted up and the TWRP screen is on. The phone is connected to the laptop and I can hear an audible noise, but there is nothing in the explorer folders that looks like A001 which is what the phone usually looks like when plugged in. If it was I'd like to think it would be straight forward.
se7enlyn said:
Try using a OTG cable with a thumb drive
Click to expand...
Click to collapse
Any recommendations? never used one so I wouldn't want to get the wrong one or one that crap it only lasts 5 minutes. Thanks
EDIT... just ordered this cheap effort https://www.ebay.co.uk/itm/Micro-US...565007?hash=item3af91d86cf:g:y0MAAOSw6VRZ5mtz . Hopefully it will get me back up and running.
should be ok but if not try this https://www.ebay.co.uk/itm/2x-Micro...475501&hash=item25bec575e8:g:z~YAAOSwPkJafy8v its what i buy
afternoon all. right, the postie has turned up with my thumb drive.Could someone advise as to the procedure to get me up and running?
Thanks Foz
ok ... I've now got an OS on the phone...
Thanks to all who have helped.
just as an add on to this thread in case someone has a similar problem.
The phone still wasn't running right and I hadn't installed Gapps so I decided to re flash and start again. Now when I booted into twrp to reflash, it couldn't read the files on the SD card in the thumb drive. I ended up having to re flash a different version of twrp on the phone which miraculously could see the files on the SD card which I installed. The issue I now have is that I don't think there is an area on the phone to store stuff. Whenever I take a pic the camera can't see or access the SD card. When the phone is connected to the laptop, there are no folders within explorer to view so I can't drag n drop files etc to the phone. any ideas/suggestions as to get this sorted?
Thanks in advance... Foz
OK we're sorted. After trying (nearly) every help guide with no luck, I found a similar problem on a YouTube video. In the comments, someone suggested trying to use a Bacon Root Toolkit by WugFresh. after a few minutes setting it up, I've have finally flashed 12.1-YOG4PAS3JL. It has given back my internal SD card. Going to do a back up in a moment and I'm off to flash a more recent ROM
I hope this info helps someone out.
Cheers all
Hello,
is there any possible way to flash the MCU config blind?
I did the mistake and changed the customer version in the advanced settings and now my screen stays completly black.
After applying the settings the Unit shut down and never came back.
I searched the forum for 2 hours now but couldn't find anything helpful.
i think i can enter the recovery but as the screen never turns on i cant see what i'm doing.
Device Infos:
Eunavi PX5 device with MTCE_LM_3V.06bd MCU
Android 9
Thank you very much
hopefully you did an export of your pre-existing settings. these export to a dmcu.cfg file.
if you put this on an sd card and re-update mcu via recovery. it will restore the working configuration.
I have my settings get buggered from time to time (especially when I change roms) and a backup of my MCU config saves me regularly.
Another option that has worked for me in the past is to swap MCU to another maker and back. This often resets the MCU config back to stock. As you are running LM MCU, flash HA or GS, and then Re-Flash your LM MCU.
Hopefully one of those will get you operating again.
Flashing with another MCU from another manufacturer don't brick the HU?
pir8man said:
hopefully you did an export of your pre-existing settings. these export to a dmcu.cfg file.
if you put this on an sd card and re-update mcu via recovery. it will restore the working configuration.
I have my settings get buggered from time to time (especially when I change roms) and a backup of my MCU config saves me regularly.
Another option that has worked for me in the past is to swap MCU to another maker and back. This often resets the MCU config back to stock. As you are running LM MCU, flash HA or GS, and then Re-Flash your LM MCU.
Hopefully one of those will get you operating again.
Click to expand...
Click to collapse
Knausepeter said:
Hello,
is there any possible way to flash the MCU config blind?
I did the mistake and changed the customer version in the advanced settings and now my screen stays completly black.
After applying the settings the Unit shut down and never came back.
I searched the forum for 2 hours now but couldn't find anything helpful.
i think i can enter the recovery but as the screen never turns on i cant see what i'm doing.
Device Infos:
Eunavi PX5 device with MTCE_LM_3V.06bd MCU
Android 9
Thank you very much
Click to expand...
Click to collapse
I hope you have your device restored right now. But if not: i has the exactly same problem. And restoring was much more simple then i thought.
1. keep de the device for a long time disconnected fully from the power. Think about 30 minutes or something.
2. place a SD card.
3. restore the power on the device.
4. press after 10 a 15 seconds one time on the on/off softbutton. You should see your startup screen and booting the device.
5. restore the custommer version to 1.
If it's not succesfully: disconnect the device from the power and let it rest for about 30 minutes and try eventually again.
If you want to in the bootloader. But it's very hard to do blind:
1. connect the power and let the device start up
2. press and hold the on/off soft button. When you see the lights on the device flashes 3 times release.
3. Press directly 2 or 3 (don't know what i did) and you are in the bootloader.
haajee86 said:
...
2. place a SD card.
...
Click to expand...
Click to collapse
I will probably have a recovery, my PX5 has a black screen (after TWRP flash to boot sector) and does not light up even at the reverse gear engaged. Btw what is the connection of the SD card mentioned in the manual?
Is it worth buying s-video (rca) - vga reduction with the fact that the video output can go to another output or is the black screen error something else?
Thanks.
hegolos941 said:
I will probably have a recovery, my PX5 has a black screen (after TWRP flash to boot sector) and does not light up even at the reverse gear engaged. Btw what is the connection of the SD card mentioned in the manual?
Is it worth buying s-video (rca) - vga reduction with the fact that the video output can go to another output or is the black screen error something else?
Thanks.
Click to expand...
Click to collapse
Revived a 2 year old thread, perhaps outline the issue and question. Is your device an MTCD/E?
My PX5 (has a reset hole and SD card slot) with hal9k Android 9 with Magisk root was fully functional. Yes is MTCD/E. It lost root, Magisk could not be reinstalled. I tried to flash TWRP recovery for PX5. In the TWRP interface I marked flash to boot. After the restart, there is only a black screen. The module that activated the display from the rear camera when reversing to the reverse gear also does not work (does not display the image from rear camera). When resetting with a button or hole, the lights flash as usual but do not start or the recovery menu is not visible. If I leave the PX5 without a reset after turning on the key, it will restart itself after about 1 minute.
I continue in the thread as it is one of the few where it is written about a practically identical situation. I found it reasonable to get info in a similar situation, more than starting a new topic. Especially if this thread does not have 100 pages.
hegolos941 said:
My PX5 (has a reset hole and SD card slot) with hal9k Android 9 with Magisk root was fully functional. Yes is MTCD/E. It lost root, Magisk could not be reinstalled. I tried to flash TWRP recovery for PX5. In the TWRP interface I marked flash to boot. After the restart, there is only a black screen. The module that activated the display from the rear camera when reversing to the reverse gear also does not work (does not display the image from rear camera). When resetting with a button or hole, the lights flash as usual but do not start or the recovery menu is not visible. If I leave the PX5 without a reset after turning on the key, it will restart itself after about 1 minute.
I continue in the thread as it is one of the few where it is written about a practically identical situation. I found it reasonable to get info in a similar situation, more than starting a new topic. Especially if this thread does not have 100 pages.
Click to expand...
Click to collapse
Rear camera module for reversing, interesting, perhaps MCU is meant.
Suggest SOM storage is now corrupt due to flashing recovery ( twrp is utterly useless on these devices, but hey,
beats reading 100s of pages. Good on you for an authentic outline of the issue)
Just a suggestion to resolve; OTG, apply MASKROM or buy replacement SOM.
Cordially, M
The module in post #7 is meant a small box that decodes the signal from the original rear camera to PX5 display. I mentioned it because it always worked. Even though the radio froze, for example, the rear view camera worked. Now the reversing speed doesn't even activate the image from the rear camera - that's why I thought the video output might be changed. Wrong construction
Anyway I understand = SDboot using SD card or USB drive made with RockChip Tools won't help me and I have to look for pins and adjust the USB cable. I wanted to avoid it Thank you for your reassurance.
I finally solved it without a USB cable. It was enough to make SDboot using an older version of SDDiskTool_v1.46 (the version of SDDiskTool_v1.69 on Windows 10 + Mac did not see the SD slot, on the second PC it made 15 partitions for me on the SD card).
1. I made an SDboot with Android 6 recovery. After inserting the SD card and pressing the reset, the boot logo appeared, ie the problem with the black screen disappeared. Immediately, the image from the rear camera "started" to work.
2. After writing Android 6 recovery, I made an Android 8 recovery SD card (also using an older version of SDDiskTool_v1.46) and I successfully repeated the procedure. With the functional recovery mode, I uploaded the update.zip from USB (the Hal9k PX5 mod 3.x) without any problems.