Belt clip cases/pouches - Nexus 6P Accessories

Hey guys. My dad is thinking of getting the 6p. He is a police officer and usually carries his phones in his vest pocket on his chest. That said, the 6p is too tall to fit in the vest pocket.
Can any of you make any recommendations on a good case with belt clip or maybe a pouch he could clip on his duty belt? He usually prefers cases that aren't bulky, but I'm just trying to get an idea of what his options would be.
Thanks in advance for the help!

Def, get a unicorn Beatle case. I wear a uniform. Works great. Just like a Otterbox defender case. Amazon is where to look.

Related

Holster that will fit Nexus one with case on?

I am looking for a good holster that will hold the Nexus One while it has a case on. I have a transparent TPU case (have to show off the sexy engraving on the back). Does anyone have a recommended case that can hold or adjust to the nexus one while it has the added bulk of a case on it?
I am looking for something like the Seidio Innocase Case Holster which is here on Amazon.
If you check out down in the review area there is a video and a guy reviewed it and it seems to fit the Innocase inside the holster pretty well. Didn't look like it would fall out.
Anyone have any experience or suggestions with this? Let me know. Thanks.
EDIT: I actually just discovered that there are 2 versions of the Seidio Holsters; one for a device that does not have a case and one for a device that does have a case.
You can check out a good Youtube review of the Holster and Innocase here.
You can see that there is a special version of the holster here on Seidio's website.
lordzelo said:
I am looking for a good holster that will hold the Nexus One while it has a case on. I have a transparent TPU case (have to show off the sexy engraving on the back). Does anyone have a recommended case that can hold or adjust to the nexus one while it has the added bulk of a case on it?
I am looking for something like the Seidio Innocase Case Holster which is here on Amazon.
If you check out down in the review area there is a video and a guy reviewed it and it seems to fit the Innocase inside the holster pretty well. Didn't look like it would fall out.
Anyone have any experience or suggestions with this? Let me know. Thanks.
EDIT: I actually just discovered that there are 2 versions of the Seidio Holsters; one for a device that does not have a case and one for a device that does have a case.
You can check out a good Youtube review of the Holster and Innocase here.
You can see that there is a special version of the holster here on Seidio's website.
Click to expand...
Click to collapse
IMO holsters = dropped phone... Either the phone pops out on its own, or gets bumped...
My thing is that I've had the dust under the screen problem so I wanted to get it out of my pocket. It does raise the risk of a drop though, this is true. Who wants to drop a $530 phone.
lordzelo said:
My thing is that I've had the dust under the screen problem so I wanted to get it out of my pocket. It does raise the risk of a drop though, this is true. Who wants to drop a $530 phone.
Click to expand...
Click to collapse
Oh, I use horizontal cases, have for years. Never dropped a phone from one, just of course you gotta be mindful when you're putting it in, taking it out.. And personally I always get them with a belt clip (to keep it in place on my belt) and belt loops. One case I had didn't have belt loops and I was always finding the phone in my car seat where it pushed off my belt.
I recently ordered this case... Hopefully coming in the next day or two. Otherwise I have some cheap cases which work, or my beat-to-hell Seideo case.. http://www.amazon.com/gp/product/B001IM61D4/ref=oss_product
Only time I ever pocket carry a phone is when I have a new phone and I'm transitioning between the two, or sometimes on the weekend when I'm just lazing around the house.
I use a nite ize heavy duty holster. Size medium. It fits my otterbox defender and casemate tough case NP.
I use a cellet bergamo iPhone belt clip / holster nice and snug on my innocase 2
lordzelo said:
I am looking for a good holster that will hold the Nexus One while it has a case on. I have a transparent TPU case (have to show off the sexy engraving on the back). Does anyone have a recommended case that can hold or adjust to the nexus one while it has the added bulk of a case on it?
I am looking for something like the Seidio Innocase Case Holster which is here on Amazon.
If you check out down in the review area there is a video and a guy reviewed it and it seems to fit the Innocase inside the holster pretty well. Didn't look like it would fall out.
Anyone have any experience or suggestions with this? Let me know. Thanks.
EDIT: I actually just discovered that there are 2 versions of the Seidio Holsters; one for a device that does not have a case and one for a device that does have a case.
You can check out a good Youtube review of the Holster and Innocase here.
You can see that there is a special version of the holster here on Seidio's website.
Click to expand...
Click to collapse
i have it. and its very good. case itself is rubberized. with my extreme use holster broke few weeks ago (used it since it came out), Seidio shipped me a new one since their warranty is very long.
From another thread that i answered last week
solidmac said:
htc leather case that I own fits my n1 with a case on it perfectly, rotates, clip is tight and secure, real leather, I run every day with it on and it never slips out of my belt.
http://www.htcdepot.com/htc-matte-leather-horizontal-pouch/4A120A3630.htm
Click to expand...
Click to collapse

[Q] Best Rugged Case/Holster

I'm about to purchase an HTC Desire, and I'm shopping for a good case/holster so I'm ready to go once I get the new phone (just waiting on the contract to expire)...
I work in a manufacturing plant, and I'm pretty rough on phones. I typically carry them horizontally on my belt, and I'm looking for something similar. However, I want something that will protect as much as possible as it get bumped on equipment, conveyor, etc. Screen-in is a must, obviously. I'd really like something that protects the phone all the time, and then some sort of holster that holds the phone with the protection.
The best thing I've found is a Innocase Rugged Combo, but it's only available for the Nexus One, and won't fit the desire...
Something similar I've found is a snap-on hard case combo but I haven't found any reviews. It's a hard cover and a clip-type holster together from Techie Warehouse (mfg unknown).
Then there are clip-type holsters like the Amzer Rubberized holster.
Or leather holsters like the MobiMan Premium.
Then, I've always got the option to make something. My best friend makes leather and kydex holsters, so I'm tempted to make my own holster like the leather or clip one. I would just keep the phone in armor like the Case-Mate Barely There, Case-Mate Tough, or PDair Aluminum Case within the holster I make.
What do you guys think? Any experience with any of these, especially the Techie hard combo case? Thanks,
Danny
Have you had a peek at the OtterBox line of cases? They are pretty tough, especially the Defender. The Desire cases are at http://www.otterbox.com/desire-cases/desire-cases,default,sc.html. Only the Defender has a belt clip, and it's made to fit the case. Someone else on XDA had one, and they dropped their Desire down a set of stairs, and it hit a wall and then the ground, and the case was undamaged, and so was the phone.
Just quickly, and off topic, but welcome to xda-developers, shorin!
Yes, I looked at the Otterbox cases. They look very nice, but they just don't quite meet my needs.
The Defender does have a belt clip, but it places the screen out. I'd break the screen in a day with that...
I have considered the Commuter if I make my own holster.
Thanks for the welcome. I've been on here quite a while. Just never needed to post until now...
Thanks,
Danny
It looks like the Otterbox Defender may be the ticket. I did some looking again, and I didn't see any reason the phone wouldn't fit with the screen in.
I found a review on YouTube that confirms this and I also asked the question via the Q&A on the Otterbox website and they confirmed that the holster will work screen-in.
Problem solved...
Danny
No problem!
Sent from my rooted HTC Desire running LeeDROID T-Mod 2.2e with Tapatalk.
Just a lily note. I personally use the otterbox defender. It fits the holder screen in or out. And my opinion the best protection money can buy.
Set Via XDA App

[Q] Case that works with a belt holster or a belt clip?

Hi,
Searched the forums, but couldn't find a thread that talks what I need.
Currently I have my eyes set on a Trident Case from Amazon.
I'm looking for a case the offers good protection that can be used with a belt holster or a belt clip.
I've looked at holsters like these. But the issue is they are not wide enough to insert a phone that already has a cover like Trident. IF I can find a holster big enough so I can put the phone with the Trident cover in to it that would be great.
Or else maybe a belt clip that works with the Trident cover?
I'm not dead set on the Trident cover, so if you have better suggestions please let me know.
Thanks
I have the Seidio Surface case and holster. I also have 3 Nillkin cases that fit within the Seidio holster very well, but they don't offer as much protection as the Seidio case does. I definitely recommend the Seidio Surface line...it's a very well made case and holster (full body protection, felt lined case, and the holster is felt lined as well).
Of course, nothing offers the same protection as the Trident Aegis...that's like wrapping a quilt around your phone. I don't know of any holsters that fit the Aegis.
wish seidio made an active case for us...

Looking for stand alone holster suggestions.

There's a few times in the past where I have used different cases that I really liked with a holster since there was not a matching holster with the case.
Looks like I'm going to run in the same situation here and was wondering if anybody had a good line of holster vertical or horizontal that they would recommend.
I'd prefer something with a rotating belt clip on it.
Thank you.
Pouch with a belt clip? So like an old Blackberry one? I have a pouch from Begoos on Etsy and its great, but it doesn't have a belt clip.
Not sure exactly what you are looking for but here is one I bought..... I posted it in a thread:
http://forum.xda-developers.com/nexus-6p/accessories/dragonfly-universal-nylon-mobile-phone-t3289056
Search in Etsy. They have plenty of handmade pouches.
I should have said Holster I guess, but I figured folks would point me to case/holster combos. You know, like this...
http://www.amazon.com/TMAN-Leather-holster-Huawei-itself/dp/B0160LAOTO/
Sorry for the confusion, was a crazy night, let me update the OP.
Bump
This is the case/holster combo i use. Not the leather-y pouch like you linked, but i'm more of a fan of something more solid protecting the phone.
http://www.amazon.com/Seidio®-SURFA...id=1453249758&sr=1-3&keywords=seidio+nexus+6p
Thanks, I've sworn off of Seidio though. Cheap holsters that the clips break off of all the time, horrible customer service, and other issues I've had with them. I've found some excellent cases for the 6P, just need a holster to put it in. The TUDIA OMNIX is the one I'm trying to find a holster to fit right now.
Here's another one,: Encased Spring Holster.
Not sure on the quality, but I do highly recommend Seidio products though.
y2k1ltd said:
Here's another one,: Encased Spring Holster.
Not sure on the quality, but I do highly recommend Seidio products though.
Click to expand...
Click to collapse
That looks very interesting. I did buy the Seidio one similar to that one for my Nexus 6P though . I bought the one for the iPhone 6 Plus. The fit wasn't perfect but very close. I stopped using it after my phone popped out once. The clip also cracked the top of my IntelliArmor TGSP.
ReaperNY said:
That looks very interesting. I did buy the Seidio one similar to that one for my Nexus 6P though . I bought the one for the iPhone 6 Plus. The fit wasn't perfect but very close. I stopped using it after my phone popped out once. The clip also cracked the top of my IntelliArmor TGSP.
Click to expand...
Click to collapse
That's interesting. I've been using the Seidio surface holster made for the iCrap 6+ with the Nillkin Nature case without any issues or the device popping out. The clip is flat on top of the device and not at an angle suggesting the device is too tall for the holster.
y2k1ltd said:
Here's another one,: Encased Spring Holster.
Not sure on the quality, but I do highly recommend Seidio products though.
Click to expand...
Click to collapse
I'd never use Seidio products again. Terrible customer service/support, and the clips for the holsters break like candy.
I believe this Encased one is only for naked phones though.
RED ZMAN said:
I'd never use Seidio products again. Terrible customer service/support, and the clips for the holsters break like candy.
I believe this Encased one is only for naked phones though.
Click to expand...
Click to collapse
This is great! i was looking for one of these when i got my phone when it launched. Gave up on looking for one after a couple weeks though. Just placed an order for this one. Thanks!!!
I broke the holster to my case when it got caught on a chair and broke the left side support. The holster is the type where the phone slides in vertically bottom to top. I don't like the type where the phone snaps into the holster or leather pouches.
Does anyone know if you can buy the holster ONLY - NO CASE for the nexus 6p?
I need a holster cover with swivel clip. I don’t care if it is made by same manufacturer as my current generic soft lining and hard plastic shell case. I have searched ebay, amazon and other sites in google but could only find replacement holsters if I buy another case. I have four different cases already so I am sure I can find one to fit the holster.
I have checked out options in this thread but checking if there are other ideas.
y2k1ltd said:
That's interesting. I've been using the Seidio surface holster made for the iCrap 6+ with the Nillkin Nature case without any issues or the device popping out. The clip is flat on top of the device and not at an angle suggesting the device is too tall for the holster.
Click to expand...
Click to collapse
I have the same Nillkin case - is the Seidio holster you're using the one for an "uncased" iphone 6+ (http://www.amazon.com/Seidio-Spring-Clip-Holster-Non-Cased-iPhone/dp/B00OBWMSBW) or did it come with the iphone 6+ case? Thanks in advance
ddenson said:
I have the same Nillkin case - is the Seidio holster you're using the one for an "uncased" iphone 6+ (http://www.amazon.com/Seidio-Spring-Clip-Holster-Non-Cased-iPhone/dp/B00OBWMSBW) or did it come with the iphone 6+ case? Thanks in advance
Click to expand...
Click to collapse
Using the Seidio surface case holster.
Ditto on Seidio holsters breaking. I had theirs for my previous phone and wouldn't recommend it. Their design is flawed. I had an encased holster for my S6 and it worked really well. Design was probably one of the better.
Bump. I'm looking for something similar. Problem is that most of the pouches I find online are cheap and will eventually tear or break somehow.

Belt "Holster" recommendation:

If anyone is looking for a belt holster style carrying case, this is one that I got a few weeks back:
https://www.amazon.com/gp/product/B01H2K0M58/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
So far it's worked very well for me. I keep the Incipio Battery Pack on all the time on my phone and it fits just beautifully in this case. Just about the perfect size to easy in, easy out with the battery pack on it. Not very expensive either. The material is appears to be good quality.
I was even able to fit the phone with the JBL speaker mod on it in the case, though that was a tight fit.
There are two negatives worth noting:
1. It's big! Well, obviously it has to be cause it's a big (ie, tall) phone so it looks a little large on your hip. If having something big and heavyish on your hip is going to bug you, then don't get it.
2. I'm not thrilled with the clip... It's strong enough, but it doesn't hold as tightly as I'd like. This makes it easy to get the case on and off your belt... but a little too easy. A couple of times I've pulled the whole case off when just trying to get my phone out. And at least once when I was sitting in a deep couch for a while my normal movement while seated moved the case enough up the belt that when I stood up the case fell off my belt. (It's possible I just one a case with a belt clip that isn't as tight as it normally should be.)
Thanks for the review! Couple questions...
Is it long enough, that without a mod attached, the phone will fit with a case on it? In particular I was thinking of the bumper.
I work on trucks for a living. Having it slide off my belt would be annoying. Do the clips have enough space, that were I to glue them down, I'd be able to slide a belt through them?
Never mind, I see it has loops.
How well has it held up, since you've purchased it?
Just to let you know...the Incipio Performance Level 4 cases come with a holster as well. And they're not bulky like the OtterBox Defender series.
As a follow up, the AGOZ holster is great! At first I thought the clip was overkill, and contemplated removing it, but in unison with the loops, it firmly holds the holster where I want it. I use it all week long at work, since I work on trucks, and want the most protection possible, without the Otterbox bulk in hand.
I did look at the Incipio holster, but it looked awkward used in the horizontal position. I did purchase their bumper, which I love. On weekends, I use the Seidio Dilex Pro holster for the Galaxy Note 5, recommended on another forum. It's a perfect holster in combination with the bumper, and allows for any mod to be used.
I just want a simple clip holster that works with the back panel that came with the phone. No bumper, no case... Just a belt clip.
No where to be found.
I use this sometimes. Works fine with the style shell or Incipio battery pack. It has a nice sturdy metal clip that allows the case to rotate.
Turtleback Vertical Ballistic Nylon Holster Pouch Extended - Fits Samsung Galaxy S5 with Otterbox - Metal Belt Clip - Magnetic Flap Closure - Made in https://www.amazon.com/dp/B00KO8LFPM/ref=cm_sw_r_cp_apap_oCoqdZ6G7QI1N
Sent from my XT1650 using Tapatalk
I bought this 3 years ago. It will fit any phone, phone/mod out there. I got tired of snapping off the otterbox holster clips getting in and out of the car.
https://www.amazon.com/gp/product/B001DZPBXM/ref=oh_aui_detailpage_o04_s01?ie=UTF8&psc=1

Categories

Resources