Related
Hello guys, i'm new on the world of Android and i need a little help. I'm newbie but i learn fast.
I got a new phone with android 4.4.2 China honor 3 (fake), after uninstalling some China app the operation system started to stuck at logo at the start.
So to solve the problem i red that i could restore the old OS using ROM file. The factory where i bought the phone sent me the official ROM file for my phone.
Now i entered on Recovery mode, first i did "wipe data/factory reset", then with ADB i loaded the file .zip "adb sideload update.zip". But how the file is uploaded it says "Installation aborted", without any error.
So now i need your help how can i restore this system... I tried also to buy an SD card 8 gb and upload the file on the SD, but same error.
Thank you for your help!
try this guide
http://forum.xda-developers.com/showthread.php?t=2517943
bcuz you can;t flash rom with stock recovery so you install cwm mod from this guide:fingers-crossed:
3lo0sh said:
try this guide
http://forum.xda-developers.com/showthread.php?t=2517943
bcuz you can;t flash rom with stock recovery so you install cwm mod from this guide:fingers-crossed:
Click to expand...
Click to collapse
Thank you for the answer. But wheni try to run TouchRecoveryLoader.zip from recovery, it says "installation aborted" like for the ROM.
I dont know if the phone got root access, i think this can be the problem.
Can youhelp me?
Thank you
Bump! Need help guys
SUMMARY:
I unistalled wrongly MIUI (MiHome app) and the phone stopped working correctly.
Phone is a fake honor 3c with MTK 65xx processor.
1 - Phone doesnt load the main theme, after the android logo i see a black page. (i see the top bar where there are wifi, time etc)
2 - The phone is not rooted. (i think)
3 - I can enter in Restore Mode and Factory Mode.
4 - I got the official ROM file. (the factory gave me it)
5 - All file zip (that i try to use in recovery from SD or ADB) give me "Installation aborted" without any error.
6 - I haven't USB DEBUG enabled, and i can't enable it cause i can't load the Operation system.
shayolz said:
Bump! Need help guys
SUMMARY:
I unistalled wrongly MIUI (MiHome app) and the phone stopped working correctly.
Phone is a fake honor 3c with MTK 65xx processor.
1 - Phone doesnt load the main theme, after the android logo i see a black page. (i see the top bar where there are wifi, time etc)
2 - The phone is not rooted. (i think)
3 - I can enter in Restore Mode and Factory Mode.
4 - I got the official ROM file. (the factory gave me it)
5 - All file zip (that i try to use in recovery from SD or ADB) give me "Installation aborted" without any error.
6 - I haven't USB DEBUG enabled, and i can't enable it cause i can't load the Operation system.
Click to expand...
Click to collapse
if you open the zip file you got, whats inside it? is it a .tar file, or a .md5 file?
Sorry, i didn't write that i SOLVE the problem!
I userd flash tool selecting only "ANDROID" and pointing to the system.img of the ROM that the factory gave me.
Android reinstalled, all working fine.
/closed
thanks
Hello Friends
A little background first !!
QiKU Q Terra (CP8692_I02) which was sold in India and came pre-installed with 360 OS v21, Android 5.1. The OEM went back to China hence there haven not been any software update for our device. I had been trying to boot latest Chinese 360 OS on Indian Qiku Terra to get updates but after flashing the Chinese version the device would not boot at all and would get stuck in fastboot mode. To revive the device, I had to flash back the V21, I had tried several times but no success.
I even got in touch with the 360 OS engineers over mail with the help of an administrator of Qiku Chinese forum but the engineers said it's not possible to flash Chinese 360 OS on Indian Qiku Q Terra.
I had also been trying to root QiKU and I was able to figure it out all recently.
Check out my post -- https://forum.xda-developers.com/an...i02-unlock-t3493636/post69455878#post69455878
This tutorial is also useful for users of CP8692_M02 who had flashed the v21 on their devices and now are not able to go back to CP8692_M02.
Warning !! Try this own your on risk although it's very safe if you follow the instructions without missing any steps. Don't blame me if you still manage to kill your phone and loose your job :laugh::laugh:
Let's begin !!
Just ensure your device bootloader is unlock before you follow the instructions as it's required to boot 360 Chinese OS on the Indian QiKU.
Download the latest firmware and flash the same with YGDP or Qiku Download Assistant tool. When finished, the device won't boot and still be in fastboot mode. Now boot TWRP recovery from your pc, go to the folder where you have the TWRP recovery and press shift and right click and select "open command window here" and type the following
fastboot -i 0x1ebf boot (recovery name).img
This should boot TWRP on your device.
You can also flash TWRP recovery if wish to,
fastboot -i 0x1ebf flash recovery (recovery name).img
Now boot TWRP
fastboot -i 0x1ebf boot (recovery name).img
When in recovery mode you can use cmd to extract params partition which contain your device model name. Open cmd on your pc and type the following command
dd if=/dev/block/mmcblk0p30 of=/sdcard/params.bak
Once done, you'll have a file name params.bak on your phone's internal memory, copy the same to your pc. Download NotePad++ and install it, link - https://notepad-plus-plus.org/
Only use NotePad++ to edit the params, don't use NotePad. Plus make a copy of your params.bak file and keep it somewhere safe in case you mess up with original params file.
Right click on params.bak and open it with NotePad++, now search CP8692. The device model name would be CP8692_I02 just change I to M and save the changes, now it should be CP8692_M02.
The system partition size is not enough to flash Gapps hence you need to use TWRP recovery resize option.
In TWRP recovery and select > Wipe > Advance Wipe > System > click FS Option > click Resize FS now you shall have more free space in system partition
In TWRP now click reboot then click bootloader, in bootloader press volume up for fastboot mode. On pc open cmd in the folder where you have params.bak saved and type the following command:-
fastboot -i 0x1ebf erase params
fastboot -i 0x1ebf flash params params.bak
fastboot -i 0x1ebf reboot
If everything went well your device should boot Chinese 360 OS, Android 6.0.1 normally.
Now flash modified Gapps in TWRP which you have downloaded. The modified Gapps has Gmail & Hangout beside core apps and rest you can download from play store later.
If you flash bigger Gapps, the device will not boot or it shall be in bootloops coz of Gapps size and if you don't flash Gmail and Hangouts with the modified Gapps and download the same from Play store then it would give you connection trouble.
In case you wish to root then flash SuperSU.zip in TWRP.
Back to the booted device:-
To Activate VoLTE, download QuickShortcutMaker app from play store. Open the app and locate MBN test > click on the dropdown menu > click Try > Tick Volte_OpenMkt-Commercial-CMCC > and last click Activate.
Close the app and go to phone setting > Call settings > and enble VoLTE and you're done. You should see HD sign in the status bar of your phone. Now you can enjoy VoLTE calls.
Download the latest 360OS 2.0 V18 stable version: http://pan.baidu.com/s/1slCmsKP password: i65r
Follow the tutorial to download from Baidu without log-in and download client - https://www.youtube.com/watch?v=cigJh9jg4-c
Download modified Gapps and supersu.zip - https://drive.google.com/drive/folde...ElFemQwTTFXcTQ
Credits:
Goes to me @Zauq for figuring out unlocking bootloader, rooting, modifying TWRP for cp8692_I02 etc. Without the unlocked bootloader the above was not possible.
Goes to @cuongvietnam for instructions to modify params and flashing the same and also about the Gapps size issue
Have Fun :good::good::good:
plz share firmware/rom
good effort bro......kindly wants to tell that new kingroot app is now able to root qiku q terra.....and using app2sd i am able to move max of my apps to sd card ....but i also like ur effort to install android 6 rom in indian qiku.....but i hav a request to plz make a video about whole thing(as that would me more reliable to understand).....and plz share ur downloaded firmware/rom......i hav downloaded android6.cpb file shared by zuaq....so any trick to install directly this rom ?
thx in advance
---------- Post added at 05:28 AM ---------- Previous post was at 04:59 AM ----------
and also i think we can use buildprop edit apk to change build name of indiian qiku (I->M) .....anyway i hav very little knowlg of all this...but try to impliment ur process
Rahulraj2012 said:
good effort bro......kindly wants to tell that new kingroot app is now able to root qiku q terra.....and using app2sd i am able to move max of my apps to sd card ....but i also like ur effort to install android 6 rom in indian qiku.....but i hav a request to plz make a video about whole thing(as that would me more reliable to understand).....and plz share ur downloaded firmware/rom......i hav downloaded android6.cpb file shared by zuaq....so any trick to install directly this rom ?
thx in advance
---------- Post added at 05:28 AM ---------- Previous post was at 04:59 AM ----------
and also i think we can use buildprop edit apk to change build name of indiian qiku (I->M) .....anyway i hav very little knowlg of all this...but try to impliment ur process
Click to expand...
Click to collapse
Help me
I was plash rom but now my phone is hardbrick
My computer is see bootloader but flash file cpd no working
mr_thao said:
Help me
I was plash rom but now my phone is hardbrick
My computer is see bootloader but flash file cpd no working
Click to expand...
Click to collapse
You can load bootloader in your manager device? If you can, so it not brick!
Zauq said:
Hello Friends
A little background first !!
QiKU Q Terra (CP8692_I02) which was sold in India and came pre-installed with 360 OS v21, Android 5.1. The OEM went back to China hence there haven not been any software update for our device. I had been trying to boot latest Chinese 360 OS on Indian Qiku Terra to get updates but after flashing the Chinese version the device would not boot at all and would get stuck in fastboot mode. To revive the device, I had to flash back the V21, I had tried several times but no success.
I even got in touch with the 360 OS engineers over mail with the help of an administrator of Qiku Chinese forum but the engineers said it's not possible to flash Chinese 360 OS on Indian Qiku Q Terra.
I had also been trying to root QiKU and I was able to figure it out all recently.
Check out my post -- https://forum.xda-developers.com/an...i02-unlock-t3493636/post69455878#post69455878
This tutorial is also useful for users of CP8692_M02 who had flashed the v21 on their devices and now are not able to go back to CP8692_M02.
Warning !! Try this own your on risk although it's very safe if you follow the instructions without missing any steps. Don't blame me if you still manage to kill your phone and loose your job :laugh::laugh:
Let's begin !!
Just ensure your device bootloader is unlock before you follow the instructions as it's required to boot 360 Chinese OS on the Indian QiKU.
Download the latest firmware and flash the same with YGDP or Qiku Download Assistant tool. When finished, the device won't boot and still be in fastboot mode. Now boot TWRP recovery from your pc, go to the folder where you have the TWRP recovery and press shift and right click and select "open command window here" and type the following
fastboot -i 0x1ebf boot (recovery name).img
This should boot TWRP on your device.
You can also flash TWRP recovery if wish to,
fastboot -i 0x1ebf flash recovery (recovery name).img
Now boot TWRP
fastboot -i 0x1ebf boot (recovery name).img
When in recovery mode you can use cmd to extract params partition which contain your device model name. Open cmd on your pc and type the following command
dd if=/dev/block/mmcblk0p30 of=/sdcard/params.bak
Once done, you'll have a file name params.bak on your phone's internal memory, copy the same to your pc. Download NotePad++ and install it, link - https://notepad-plus-plus.org/
Only use NotePad++ to edit the params, don't use NotePad. Plus make a copy of your params.bak file and keep it somewhere safe in case you mess up with original params file.
Right click on params.bak and open it with NotePad++, now search CP8692. The device model name would be CP8692_I02 just change I to M and save the changes, now it should be CP8692_M02.
The system partition size is not enough to flash Gapps hence you need to use TWRP recovery resize option.
In TWRP recovery and select > Wipe > Advance Wipe > System > click FS Option > click Resize FS now you shall have more free space in system partition
In TWRP now click reboot then click bootloader, in bootloader press volume up for fastboot mode. On pc open cmd in the folder where you have params.bak saved and type the following command:-
fastboot -i 0x1ebf erase params
fastboot -i 0x1ebf flash params params.bak
fastboot -i 0x1ebf reboot
If everything went well your device should boot Chinese 360 OS, Android 6.0.1 normally.
Now flash modified Gapps in TWRP which you have downloaded. The modified Gapps has Gmail & Hangout beside core apps and rest you can download from play store later.
If you flash bigger Gapps, the device will not boot or it shall be in bootloops coz of Gapps size and if you don't flash Gmail and Hangouts with the modified Gapps and download the same from Play store then it would give you connection trouble.
In case you wish to root then flash SuperSU.zip in TWRP.
Back to the booted device:-
To Activate VoLTE, download QuickShortcutMaker app from play store. Open the app and locate MBN test > click on the dropdown menu > click Try > Tick Volte_OpenMkt-Commercial-CMCC > and last click Activate.
Close the app and go to phone setting > Call settings > and enble VoLTE and you're done. You should see HD sign in the status bar of your phone. Now you can enjoy VoLTE calls.
The latest firmware is 360OS 2.0 (12.28) which is beta and gets weekly update. Download the firmware - http://bbs.360.cn/thread-14613403-1-1.html
Follow the tutorial to download from Baidu without log-in and download client - https://www.youtube.com/watch?v=cigJh9jg4-c
Download modified Gapps and supersu.zip - https://drive.google.com/drive/folde...ElFemQwTTFXcTQ
Credits:
Goes to me @Zauq for figuring out unlocking bootloader, rooting, modifying TWRP for cp8692_I02 etc. Without the unlocked bootloader the above was not possible.
Goes to @cuongvietnam for instructions to modify params and flashing the same and also about the Gapps size issue
Have Fun :good::good::good:
Click to expand...
Click to collapse
I wasn't take dd if=/dev/block/mmcblk0p30 of=/sd card/params.bak
C:\adb>dd if=/dev/block/mmcblk0p30 of=/internalsdcard/params.bak
'dd' is not recognized as an internal or external command,
operable program or batch file.
Hlep me
mr_thao said:
I wasn't take dd if=/dev/block/mmcblk0p30 of=/sd card/params.bak
C:\adb>dd if=/dev/block/mmcblk0p30 of=/internalsdcard/params.bak
'dd' is not recognized as an internal or external command,
operable program or batch file.
Hlep me
Click to expand...
Click to collapse
Have you tried the code in custom recovery mode??? If you're using the code when the device is NOT in recovery mode then you have to use the following code:-
adb shell
su
dd if=/dev/block/mmcblk0p30 of=/internalsdcard/params.bak
Just bear in mind that you have to be rooted to use the above mentioned code and in recovery mode you don't need to be rooted.
mr_thao said:
Help me
I was plash rom but now my phone is hardbrick
My computer is see bootloader but flash file cpd no working
Click to expand...
Click to collapse
What was your device model no when you flashed the rom and which rom version did you flash which caused the brick???
Rahulraj2012 said:
good effort bro......kindly wants to tell that new kingroot app is now able to root qiku q terra.....and using app2sd i am able to move max of my apps to sd card ....but i also like ur effort to install android 6 rom in indian qiku.....but i hav a request to plz make a video about whole thing(as that would me more reliable to understand).....and plz share ur downloaded firmware/rom......i hav downloaded android6.cpb file shared by zuaq....so any trick to install directly this rom ?
thx in advance
---------- Post added at 05:28 AM ---------- Previous post was at 04:59 AM ----------
and also i think we can use buildprop edit apk to change build name of indiian qiku (I->M) .....anyway i hav very little knowlg of all this...but try to impliment ur process
Click to expand...
Click to collapse
Flashing the supersu.zip to root Qiku is the easiest way if you ask me. I tried my best to give the instructions in a simplest way possible making video is not on my mind.
Changing the model no in build.prop would not help in booting Android 6.0.1 on Indian Qiku v21. Had this been so easy I would've done the same a long time ago
update file params.bak edited
step 1 : flash rom china and flash TWRP
Step2: flash params.bak
Step 3: reboot
Done
Link : https://tinhte.vn/threads/danh-gia-chi-tiet-qiku-terra-sieu-pham-den-tu-india.2543152/#post-49187102
Rom restore , rooted and playstore,super lite : https://drive.google.com/file/d/0B1JX0MSsEt63Zzd2MzVMb20wNTA/view
Hello bro,i want to downgrade to 5.1 v021 from 6.0 v18 china rom,but i haven't link rom.zip (i have twrp),give me link rom 5.1v021 .zip,please
Thanks for watching!?
volte is not activating even though option came by quickshortcut..app
android 6.0 successfully installed but...volte is not activating even though option came by quickshortcut..app........also need help to change chinese 360safe apk to change language in english
....thx in advance
Rahulraj2012 said:
android 6.0 successfully installed but...volte is not activating even though option came by quickshortcut..app........also need help to change chinese 360safe apk to change language in english
....thx in advance
Click to expand...
Click to collapse
Help me @Zauq. I am not able to download 6.0 update file from baidu as connection to file gets disconnected after 1 GB of data everytime. I have wasted atleast 10 GB of data due to this. Please help me out if you can upload the file to google.
Thank you in advance.
Rahulraj2012 said:
android 6.0 successfully installed but...volte is not activating even though option came by quickshortcut..app........also need help to change chinese 360safe apk to change language in english
....thx in advance
Click to expand...
Click to collapse
Did you also enable VoLTE in system settings?? I would not be able to change Chinese language in 360safe.apk.
imlb said:
Help me @Zauq. I am not able to download 6.0 update file from baidu as connection to file gets disconnected after 1 GB of data everytime. I have wasted atleast 10 GB of data due to this. Please help me out if you can upload the file to google.
Thank you in advance.
Click to expand...
Click to collapse
My google drive is already full hence won't be able to upload it. Trying signing up Baidu and download the file with Baidu client.
Zauq said:
My google drive is already full hence won't be able to upload it. Trying signing up Baidu and download the file with Baidu client.
Click to expand...
Click to collapse
Thanks for your quick reply. I am not able to sign up on baidu. If you have latest file than please upload on any big file sharing site such as pcloud. That will be very helpful. I am bit of noob on development side of Android. I have developed kernel driver for real time linux but android I am learning. Please share if any good tutorials to start developing for Android. Thanks again @Zauq
imlb said:
Thanks for your quick reply. I am not able to sign up on baidu. If you have latest file than please upload on any big file sharing site such as pcloud. That will be very helpful. I am bit of noob on development side of Android. I have developed kernel driver for real time linux but android I am learning. Please share if any good tutorials to start developing for Android. Thanks again @Zauq
Click to expand...
Click to collapse
There you go --- https://drive.google.com/file/d/0Bwy9M10qfmJLVm9MQTU0N1U2Tnc/view?usp=sharing
Have somebody schematic diagram of qiku phones? Please let me know, if find something.
Hello dear all, I have 2 issues
1) not able to get volte , even though hd voice enabled via quick shortcut app
2)updated to android 6 but even though can't make my sd card as internal storage(option is for only as portable storage present....Just like galaxy s7 I also tried abd command, becoz in s7 also even after android 6 update sdcard as internal is not by default present .....But failed)
Plz help .....Thx in advance bro zuak
Rahulraj2012 said:
Hello dear all, I have 2 issues
1) not able to get volte , even though hd voice enabled via quick shortcut app
2)updated to android 6 but even though can't make my sd card as internal storage(option is for only as portable storage present....Just like galaxy s7 I also tried abd command, becoz in s7 also even after android 6 update sdcard as internal is not by default present .....But failed)
Plz help .....Thx in advance bro zuak
Click to expand...
Click to collapse
1) Do you see HD sign in the status bar after enabling VoLTE through QuickShortcurMaker App??
2) Did you follow similar adb shell command for internal storage?? --- https://www.youtube.com/watch?v=PZLV5STiAW8
1) I m able to get on/off volte settings after quick shortcut apk,but as u ask......No hd sign in status bar
2) yes I had applied same adb shell commands but nothing happens, 360 os restarted but no increment in internal memory I need to format my memory card to use it once again
I request to make a small video for this isse resolution and plz upload if possible
Hello everyone,
I bought the leeco le max 2 via geekbuying last week and got some issues with wifi and mms (among other issues), and i would like to instal an indian stock rom.
I will try to be as clear as possible and give you as much info as i have, but since i don't really master the subject it will be a bit messy i gess.
On the box it is said that the phone is a X822, but when i go in the options, it says it is a X822, so i don't know wich one it is. It has 32g and 4gb of ram (http://www.geekbuying.com/item/LeTV-LeEco-Le-Max-2-X820-4GB-32GB-Smartphone---Rose-Gold-374437.html). It has eUI 5.8.018S installed on it.
I downloaded 2 indian roms the 16s and 19s (https://forum.xda-developers.com/le-max-2/how-to/le-max-2-official-stock-firmware-links-t3433761), but what is the difference ? Also i found some recoveries but what is this for ?
Yesterday i installed a stock rom on my redmi note 3 pro via adb (http://en.miui.com/thread-235865-1-1.html) and it was very easy.
I cannot find such a tutorial for the X820, i could need some help.
I tried to install with this method : https://forum.xda-developers.com/le-max-2/help/how-to-stock-rom-recovery-t3419377
1) Download the Indian Le Max 2 ROM from here. Download fastboot and adb and install to your PC from here
2) Keep the firmware zip file in the fastboot, adb folder of your PC. In that folder, press Shift + Right click and click on "Open command window here".
3) Boot into TWRP recovery of your phone. (Power + Vol Up) button together at boot. Perform full wipe so that there is no OS installed.
4) Enter Adb sideload
5) On PC's command prompt window which we opened earlier, enter these commands adb sideload LE_X2_X820-OS-OP-FGXOSOP5801507066S-5.8.015S.zip
6) Wait for stock firmware and recovery to be installed. Takes a long time. You can again factory reset if you want to but I did not need to do it.
7) Phone should be stock now with google app store and least bloat in Indian ROM.
But i get stuck because the adb "cannot read" the zip file. The adb find the device and the X820 go into EDL mode easily.
I also tried this : http://www.gizmochina.com/2016/11/20/leeco-x820-max-2-super-unbrick-guide/. But it also didn't work. It says "manifest.xml not found in flash".
Then i tried to rename the rom "update.zip", copy it in the phone internal storage and go into recovery (power up + power button) but it doesn't find any file. "failed to uptade!" cause : APK not found.
I don't really know what to do next, i'm a bit lost.
Could you help me installing a official rom so that it fixes my wifi/network/mms issue please ?
Thank you in advance, if you need any other information or have advice i would be really happy
Sweet-death
Hello all,
First thank you all for your numerous answers that really helped me going through the troubles of my life.
I found a solution for the installation, the link bellow :
https://forum.xda-developers.com/le-max-2/how-to/protocol-backup-stock-rom-flash-stock-t3517151
Hello Everyone -
Welcome back , In previous post i explained " How to install twrp and root Xolo Era X,4G" but i forgot to mention some things which resulted errors for many users making it non-beneficial , I mean wasted time , data , or may be the android rom. Thanks for describing problems in previous post.Now it's mine turn to return you something original , something good .Search your question answers here and problems.
Please note that this thread is only for Xolo era X , 4G marshmallow 6.0 version only , 5.1 is not supported .Sorry but update to 6.0.
1. `adb` is not recognized as an internal or external command
Ans - If you are facing this error then probably you are not in the folder where adb and fastboot tools are installed .
You have to open command prompt only where adb tools,drivers are installed.Still not solving then google it.
2. adb devices = blank (nothing is shown)
Ans - I think you have either not connected your smartphone with usb debugging on or you have not installed proper version of adb and fastboot drivers.Please google for different versions of adb and fastboot.
3. fastboot devices = blank (nothing is shown)
Ans - Same as in above answer.
4. fastboot flash recovery recovery.img = <waiting for device>
Ans - It means that you have not installed fastboot drivers properly or you have not connected your devices in fastboot mode.
5. fastboot flash recovery recovery.img = no such file found or recovery.img not found.
Ans - You have not copied or moved recovery.img(twrp or cwm image file) in the folder where adb and fastboot are installed .So put the recovery.img (it can be twrp.img or somename.img) in the adb and fastboot tools folder(it can be either found in local drive C or at any custom location) .
6. Recovery Installed successfully but still booting in stock recovery or Computer shows installation successful but still opens stock recovery.
Ans - This is a great problem for many users and it is happening due to security policies of android 6.0. To fix it Do as following-
(1) Install twrp recovery and when it say success plug your battery out .
(2)Put battery back and open smartphone in recovery mode by holding VOL Up + Power Button for 15 seconds.
(3)Now your smartphone will boot in TWRP recovery but your twrp recovery is still temporary .
(4)Install SuperSu.zip by twrp recovery and this zip file will patch boot.img and system files.
(5)After installation of zip file reboot your smartphone .
(6)Your smartphone will restart 2-3 times and finally will boot .
(7) Finally you have rooted your smartphone and installed TWRP permanently .Now install busybox and enjoy.
Note: Please Select Expert Mode when you open SuperSu app first time after this process(you will be asked by SuperSu app to select two modes 1 Expert , 2 New User ; always select Expert or root will not function properly).
I hope you got what you wanted . If i helped you then please Subscribe , like and share also Hit thanks here on xda.
Download SuperSu zip from here - https://drive.google.com/open?id=0B_Mx_zMB6YZOUENHdHpDTXZucXc
Finaly
ankitnandgavia said:
Hello Everyone -
Welcome back , In previous post i explained " How to install twrp and root Xolo Era X,4G" but i forgot to mention some things which resulted errors for many users making it non-beneficial , I mean wasted time , data , or may be the android rom. Thanks for describing problems in previous post.Now it's mine turn to return you something original , something good .Search your question answers here and problems.
Please note that this thread is only for Xolo era X , 4G marshmallow 6.0 version only , 5.1 is not supported .Sorry but update to 6.0.
1. `adb` is not recognized as an internal or external command
Ans - If you are facing this error then probably you are not in the folder where adb and fastboot tools are installed .
You have to open command prompt only where adb tools,drivers are installed.Still not solving then google it.
2. adb devices = blank (nothing is shown)
Ans - I think you have either not connected your smartphone with usb debugging on or you have not installed proper version of adb and fastboot drivers.Please google for different versions of adb and fastboot.
3. fastboot devices = blank (nothing is shown)
Ans - Same as in above answer.
4. fastboot flash recovery recovery.img = <waiting for device>
Ans - It means that you have not installed fastboot drivers properly or you have not connected your devices in fastboot mode.
5. fastboot flash recovery recovery.img = no such file found or recovery.img not found.
Ans - You have not copied or moved recovery.img(twrp or cwm image file) in the folder where adb and fastboot are installed .So put the recovery.img (it can be twrp.img or somename.img) in the adb and fastboot tools folder(it can be either found in local drive C or at any custom location) .
6. Recovery Installed successfully but still booting in stock recovery or Computer shows installation successful but still opens stock recovery.
Ans - This is a great problem for many users and it is happening due to security policies of android 6.0. To fix it Do as following-
(1) Install twrp recovery and when it say success plug your battery out .
(2)Put battery back and open smartphone in recovery mode by holding VOL Up + Power Button for 15 seconds.
(3)Now your smartphone will boot in TWRP recovery but your twrp recovery is still temporary .
(4)Install SuperSu.zip by twrp recovery and this zip file will patch boot.img and system files.
(5)After installation of zip file reboot your smartphone .
(6)Your smartphone will restart 2-3 times and finally will boot .
(7) Finally you have rooted your smartphone and installed TWRP permanently .Now install busybox and enjoy.
I hope you got what you wanted . If i helped you then please Subscribe , like and share also Hit thanks here on xda.
Download SuperSu zip from here - https://drive.google.com/open?id=0B_Mx_zMB6YZOUENHdHpDTXZucXc
Click to expand...
Click to collapse
Wahooooooo I it happened. Its done TWRP flashed successfully n my phone Is rooted. Big thanks to you and Murali Dharan and that's how it's done. Here is some point
Es file explorer can't excess root of my phone even if I hit allow.
All other root app are working fine
Can I reflash super user zip of kingo root I am asking coz there was additional files with superuser files u provided to fix twrp
I have lost ur channel put links n I will like n subscribe
CheifX said:
Wahooooooo I it happened. Its done TWRP flashed successfully n my phone Is rooted. Big thanks to you and Murali Dharan and that's how it's done. Here is some point
Es file explorer can't excess root of my phone even if I hit allow.
All other root app are working fine
Can I reflash super user zip of kingo root I am asking coz there was additional files with superuser files u provided to fix twrp
I have lost ur channel put links n I will like n subscribe
Click to expand...
Click to collapse
Hii ,
When you open SuperSu app first time , Please select Expert Mode otherwise root will not work even after granting permission.
ankitnandgavia said:
Hii ,
When you open SuperSu app first time , Please select Expert Mode otherwise root will not work even after granting permission.
Click to expand...
Click to collapse
Hallooooo!
I have already selected expert mode and other root apps working perfectly fine.
CheifX said:
I have already selected expert mode and other root apps working perfectly fine.
Click to expand...
Click to collapse
Then please update or install busybox or you have to restart device after installing busybox or try changing es explorer app version..Es file explorer with root is working fine in mine smartphone.
ankitnandgavia said:
Then please update or install busybox or you have to restart device after installing busybox or try changing es explorer app version..Es file explorer with root is working fine in mine smartphone.
Click to expand...
Click to collapse
I will try busybox later what about reflashing kingo root supperuser.
Es explorer root mot work in xolo era 4g ..same with me........can u provide cwm for my phone 5.1....plzzz
CheifX said:
I will try busybox later what about reflashing kingo root supperuser.
Click to expand...
Click to collapse
Flashing kingo root superuser is not a bad idea, you can try it but be aware of risks so take a backup through TWRP.You can try anything new after taking backup,if something goes wrong then restore your backup.Good luck.
Need latest twrp recovery
I want the latest version of recovery for xolo era 4g and want some custom roms....plz make it.....plzz
I'm facing an issue with the OEM Unlock toggle in developer options. When I toggle it On and select OK for the pop-up box that comes. It automatically disables it. Can u help me out with this and tell me why I'm facing this issue?
yes.. i was too facing this problem but if u are trying to install custom rom then u can flash 5.1 version through SPD Upgrade Tool and then toogle that option then install ur custom rom...
no option is there!
HOW TO ROOT Blu Grand M
Disclaimer: I hold no responsibility over what happens to your phone during the beginning,in the middle, and after you follow this guide
backup your files, if you don't then you're about to lose em.
(keep in mind, work in progress,sort of... ?, your choice to follow this guide)
DON'T 100% TRUST THIS YET, BECAUSE THERE IS NO CUSTOM ROM OR ANY WAY I KNOW TO ALLOW YOU TO INSTALL STOCK OS AND KEEP BOOTLOADER UNLOCKED AT THE SAME TIME. APOLOGIES. YOU CAN TRY TO DO SOMETHING ABOUT IT IF YOU WANT. I DON'T HAVE THE DEVICE TO WORK ON THIS.
--start--
Now, before you start. I feel that you need at least a VALID reason to root.
like, why do you want to root? is it for some app that requires root privileges? cause it'd be pretty useless to go
through all this without a proper reason .---. , I'm going to divide the steps into 4 Chapters (hehehe)
also the entire reason why this post exist is because I was helping a friend gain ROOT privileges cause they have an Blu grand M haha..
I don't see that many posts regarding this.. this is just to help people , if you already knew how to root your phone from the beginning then good for you.
Chapter 01: Getting prepared!
Just, WHAT are the things you need to begin rooting exactly???
well(downloads in here aswell):
a computer
a cord for your Blu Grand M
SD card
TWRP recovery for Blu Grand M from Original forum post here , by Laelson , here's a google drive link
SuperSu flashable zip file > http://www.supersu.com/download
make sure the drivers are already installed aswell
ADB > https://forum.xda-developers.com/showthread.php?t=2588979
STOCK ROM > https://www.needrombd.com/Rom/blu-grand-m-firmware/
Chapter 02: Getting started!!
enable developer options by going to settings > system > about phone > keep tapping "build number"
enable "usb debugging" and"OEM Unlocking" in developer options
plug phone to PC
open CMD on your computer then do CD <driverletter>:<into ADB folder>
in cmd , type "adb reboot bootloader" and press enter
put .IMG file into same folder as ADB
on CMD do "fastboot oem unlock"
choose YES
your phone is wiped.
Chapter 03: Flashing TWRP and using SP flash
now, with 2nd chapter done. and the IMG file of the recovery is in the same folder adb is inuse the cmd and type "fastboot flash recovery <nameofFILE>.img then reboot to twrp and then POWER OFF , once its off. open SP Flash Tool extract the downloaded STOCK ROM to its own folder and on SP flash tool and select "scatter loading file" and locate the scatter file of the stock rom after that. you should see on the big box that there are alot of things. unckeck "recovery" and click "download" , and wait for it to finish once it is finished unplug and BOOT PHONE INTO RECOVERY​
Chapter 04: Flashing SUPERSU and reboot ;D
make sure you put your supersu zip in your sd card or phone storage by now, if not then put it in there first , ok so tap on install and locate SUPERSU zip, flash then reboot ;D
CREDITS
- @Laelson , if no TWRP for Blu Grand M then root isn't going to be on this phone for a while , so thanks​
Not confirmed by anyone else but my friend. but try it if you want
My twrp worked Bro?? Congratulations for your tutorial. ?
it's showin internal storage(0mb)...
adb do not working good for my devicve... I download every thing right but when you type
adb oem unlock..... you see ( wait device)... and stop my phone in fastboot mode.... I can not get out from that... when you type ( fastboot devices) no thinge occure ... and you stay in fastboot mode....... I could not get out of it ... I tried several methods and could not .. Just left my phone until it was completely extinguished ... Then I re - shipped it .... It works now .... Maybe work with you ... but never never Succeed with me ..
Will this work with the Blu Grand 5.5 HD as it has the same chipset, processor and GPU? It has a different screen size and resolution
Hi all, I just want to let you know that
* yes, it does work, my friend was able to install it and boot into twrp but so far I have not seen a proper custom ROM for the device I was helping my friend with. so we quit (he eventually got a new google pixel phone anyway)
note: yes, we have installed TWRP and booted into it. but someone has to: make custom rom for device or try to find a way to install STOCK OS and keep bootloader unlocked at the same time. will update OP to warn everyone. sorry.
P.S: sorry for the really late reply, was busy with life.
Hi bro! I tell you that the terminal that I have now, I CANNOT flash anything, it has the BootLoader closed and I can't penetrate or delete it. Any suggestions? Scripts commands do not work, they issue an error message.