Good afternoon, I do not know if I'm in the right category, if not estaja excuse me, I'm new here.
I own a tablet Onda V919 3G Air Dual OS (Windows 10 and Android 4.4.4).
I already tried in various places, and also several places here in the forum but found no rom for this style.
I would substituila because the rom that comes on the device is a Chinese version, very very bad.
I would like you guys to help so they could help me find a rom or even develop.
I thank you all.
hi,i have a V919 Dual Os 32Gb,i've delete both windows and android,i've download android rom and i put in usb to boot trought shell,but in the shell say "image type x64 is not supported by this IA32 shell" i've aptio setup utility..how can install it?
Related
Hi,
I hope this is the right place for my question.
I just bought the Toshiba Excite Go (AT7-C8) which has an Intel x86 processor and runs Android 4.4.2 (KitKat).
(Unfortunately I am not allowed to provide the link to the product page as a link, here a few specs:
Processor*Intel® Atom® Processor Z3735G (2MB Cache, Up to 1.83GHz)
Memory1GB (on board)
Storage*8GB eMMC
)
Since it has an x86 processor I was hoping I can install somehow a Linux system on this tablet. I would like to run some home automation applications (EIBD, Linknx and openHab) which I currently run on a Geode LX 800 system. I think this here is much more powerfull with nearly the same power consumption.
Unfortunately I have no idea how to do a Linux installation on such a Android based system. Did anyone already try this and may have a small tuturial?
Thanks a lot,
Ron
Nobody has an idea or hint?
Was someone able to get root access to this tablet?
I can't even move any app to the SD card.
I start to hate this tablet, as many applications are not available for it and I can't get a Linux system set up either ...
I would appriciate any suggestion.
Root
Hello
I found a universal method for tablets on Intel, but no one tested
the Toshiba AT7-C8
http://forum.xda-developers.com/andr...p-cwm-t2975096
Regards
Hi everybody,
I bought this nice tablet from GearBest. Everything worked fine, but charging it seems too long. After some installations (MS Office, Classic Shell, CCleaner) and after several Windows 10 updates I can´t switch from Windows to Android. When I click on DualOSSwitcher shortcut on the screen nothing happens, appears only : System cannot find the path C:\Recovery\OEM\DualOSSwitcher.exe (my translation from Slovak Windows). My question is : how to repair this mistake? Will reinstallation of Insyde Q2S dual OS switcher resolve the switching between two operating systems ? Where can I download usable Insyde Q2S for this type of tablet ?
Please help mi, if anybody knows the solution of my problem.
Thank you
Majo
nofearek9 said:
can you check if the file DualOSSwitcher.exe exist ?
maybe this help : http://forum.xda-developers.com/android/general/chuwi-hi8-vi8-vi10-windows-10-os-switch-t3213263
Click to expand...
Click to collapse
Thank you very much, I downloaded it. But is it correctly applicable for Cube I6 air ?
nofearek9 said:
can you check if the file DualOSSwitcher.exe exist ?
maybe this help : http://forum.xda-developers.com/android/general/chuwi-hi8-vi8-vi10-windows-10-os-switch-t3213263
Click to expand...
Click to collapse
nofearek9, thank you very much for your help.
I tried it on my Cube I6 Air, problem is solved and everything works !!!
I wish you everything good !
majobell
Note for everyone :
You must unninstall corrupted Insyde Q2S from Windows before installation of downloaded version of switcher !
Hello everyone, i am not sure if that thread is realeted to this forum, but i couldnt find anything usefull on the internet. So i have this little,cheap 7-inch tablet wich has an x86 processor(Intel Atom Z3735G;[email protected],3 GHz). Its nothing that impressive ,but the problem here is i got the cheapest model that has 8 GB storage and this is soo small that i cant even upgrade to windows 10....
My question is how I can install android on this thing (android x86 i believe) so to get more use of it. I found a thread at the toshiba forum (https://forum.toshiba.eu/showthread.php?85658-Encore-Mini-WT7-C-100-how-to-boot-from-SD-card-boot), but when i turn on the tablet in boot menu my sd card just not appear...
I flashed android x86 4.4-r5 latest with universal usb installer tool so i guess its bootable. The UEFI is turned off and again nothing is appearing... I just want to ask can be the problem from the sd card because its old 2 GB (Big enough to fit android image on it) or i need to do a specific thing to make the tablet see it, or ineed to get another android version, i dont know. Thank you , I am really sorry if this thread is not for this forum since this tablet is x86.
i figured it out
OK,so i have done a a little of a research and figured out that its impossible to boot from sd card on this tablet. The only possible way to do it is with flashdrive via OTG cable. Another thing android x86 isn`t supported on that device and its laggy and it has screen orientation/speakers issue. The next thing i am going to try is ubuntu GNOME. I think it will be the best for this tablet but i think i woud have some space issues. OK, Sorry fro spaming in that forum the thread is closed.
TECLAST X98 PLUS II (C2D6) DUAL OS NOT BOOTING.
FINALLY I FOUND THAT WINDOWS WAS ERASED IN MY TABLET, AND THE WINDOWS ICON AND PARTITION WAS NOT FIND IN BOOT MODE AS WELL AS TWRP BUT, AT THE TIME OF BOOTING THE TAB MIDDLE OF THE SCREEN SHOWS " AFU: Test IFNI \IFNI.bin FileSize is 0x00400000" IN TWO LINES. THEREAFTER IT DIRECTLY GOES TO ANDROID. NOW THE ANDROID IS DELETING ALL FILES FROM THE EXTERNAL SD CARD AND ONLY EMPTY FOLDER IS SHOWING. I THINK IT IS BIOS COMPLAINT, IS IT TRUE, IF TRUE PLEASE PROVIDE BIOS IF YOU HAVE, IF THERE IS ANY SOLUTION PLEASE PROVIDE TO ME?
THE TAB IS WORKING IN ANDROID MODE AFTER INSTALLING FIRMWARE SUPPLIED BY THE TECLAST, BUT THERE IS NO WINDOWS ICON TO INSTALL NEW WINDOWS. I HAVE ALREADY TRIED FROM BOOT MENU, BUT IT DID,NT RECOGNISED MY PEN DRIVE.
THOSE ALL PROBLEMS STARTS WHEN I TRYING TO ROOT MY TABLET WITH "KINGO ROOT" IT SHOWS MY TABLET WAS ROOTED THEN THOSE PROBLEMS STARTED. PLEASE HELP?
Teclast x98 plus (c2d6) dual os booting problem
I FOUND THE BIOS FOR THE TECLAST X98 PLUS II C2D6 FROM http://chinagadgetsreviews.com BUT, AS PER THE GUIDELINES THE UPDATE MUST BE FROM THE WINDOWS MODE, IS THERE ANY WAY TO UPDATE THE BIOS IN ANDROID OR TWRP MODE OR ANY OTHER MODE
apparaoadari said:
TECLAST X98 PLUS II (C2D6) DUAL OS NOT BOOTING.
FINALLY I FOUND THAT WINDOWS WAS ERASED IN MY TABLET, AND THE WINDOWS ICON AND PARTITION WAS NOT FIND IN BOOT MODE AS WELL AS TWRP BUT, AT THE TIME OF BOOTING THE TAB MIDDLE OF THE SCREEN SHOWS " AFU: Test IFNI \IFNI.bin FileSize is 0x00400000" IN TWO LINES. THEREAFTER IT DIRECTLY GOES TO ANDROID. NOW THE ANDROID IS DELETING ALL FILES FROM THE EXTERNAL SD CARD AND ONLY EMPTY FOLDER IS SHOWING. I THINK IT IS BIOS COMPLAINT, IS IT TRUE, IF TRUE PLEASE PROVIDE BIOS IF YOU HAVE, IF THERE IS ANY SOLUTION PLEASE PROVIDE TO ME?
THE TAB IS WORKING IN ANDROID MODE AFTER INSTALLING FIRMWARE SUPPLIED BY THE TECLAST, BUT THERE IS NO WINDOWS ICON TO INSTALL NEW WINDOWS. I HAVE ALREADY TRIED FROM BOOT MENU, BUT IT DID,NT RECOGNISED MY PEN DRIVE.
THOSE ALL PROBLEMS STARTS WHEN I TRYING TO ROOT MY TABLET WITH "KINGO ROOT" IT SHOWS MY TABLET WAS ROOTED THEN THOSE PROBLEMS STARTED. PLEASE HELP?
Click to expand...
Click to collapse
Greetings and welcome to assist. This is for another model but the guide should work if you swap files
https://forum.xda-developers.com/x98-air/help/unbrick-bios-softbrick-x98-air-3g-id-t3285191
Good luck
Sawdoctor
So recently I got this cheap android 5.1.1 tablet with the intel cpu.
So I am into this kind of stuff with rooting devices trying different methods/programs.(NOT PROFESSIONAL)
Then I wondered can I somehow make this dualboot win10 and android at the same time...
because I did tried like 10 root aplications and it didnt work eventually so I was pissed of really bad.
After researching for 2 hours on google and ending up with crapware and screen sharers.
Hope someone here help me..
Device information: Casper VIA_S7, android 5.1.1(32 bit) CPU: x86 64 bit (SSSE3)
By the way is it possible to run one of the OS's from micro sd because of the low storage available on the device *16GB*
*If needed i can provide the detailed information of the device or other kinds*
Hi !
Dual boot isn`t as simple as it looks , it needs to be developed for your device but as I have tried to search , your device isn`t listed here on xda
You can ask here where maybe other users with a similar device can provide more feedback !
Good luck !