Database Info

[Q] Rom problem

hi frndz i have installed a custom rom into my micromax a110....i have installed it through CWM..installation has completed successfully but when i press the REBOOT NOW option the mobile is hanged and not booting....it not booting jst showing the boot screen...plz hlp

teja9490 said:
hi frndz i have installed a custom rom into my micromax a110....i have installed it through CWM..installation has completed successfully but when i press the REBOOT NOW option the mobile is hanged and not booting....it not booting jst showing the boot screen...plz hlp
Click to expand...
Click to collapse
Did you take a backup of your stock rom??
if yes flash it as this rom won't boot!
sorry- for you for choosing that rom
happened with me too- got no help!
post me the link- if i can help you to load this rom i will tell you, but till then flash your current rom

sralli said:
Did you take a backup of your stock rom??
if yes flash it as this rom won't boot!
sorry- for you for choosing that rom
happened with me too- got no help!
post me the link- if i can help you to load this rom i will tell you, but till then flash your current rom
Click to expand...
Click to collapse
Thank you very much for your advice SRALLI
yes i had a backup and i have restored it successfully
here is the rom which i had tried http://forum.xda-developers.com/showthread.php?t=2204536
plz help me which rom is working correctly in micromax a110....thank you in advance

teja9490 said:
Thank you very much for your advice SRALLI
yes i had a backup and i have restored it successfully
here is the rom which i had tried http://forum.xda-developers.com/showthread.php?t=2204536
plz help me which rom is working correctly in micromax a110....thank you in advance
Click to expand...
Click to collapse
Did you try to install it again?

sralli said:
Did you try to install it again?
Click to expand...
Click to collapse
yes i have tried....same problem arise after installing...mobile i not booting

teja9490 said:
yes i have tried....same problem arise after installing...mobile i not booting
Click to expand...
Click to collapse
did you follow the instructions correctly? double check it you might have missed something
and at first boot it boots 3-5 mins just be patient also goodluck!

hi..buddy am also facing the after i install that smart xperia rom in my neo l i cant get into clockwork mode what and i cant turn on wifi also its showing error and i tried to unlock the bootloader also but it is not working plzz help me how to uninstall that rom i need my stock rom..plsss help.

abdul007 said:
hi..buddy am also facing the after i install that smart xperia rom in my neo l i cant get into clockwork mode what and i cant turn on wifi also its showing error and i tried to unlock the bootloader also but it is not working plzz help me how to uninstall that rom i need my stock rom..plsss help.
Click to expand...
Click to collapse
So abdul you mean to say that- you can enter your rom but you can't enter the cwm recovery and can't turn on your wifi??

ravenwing_15 said:
did you follow the instructions correctly? double check it you might have missed something
and at first boot it boots 3-5 mins just be patient also goodluck!
Click to expand...
Click to collapse
yes i have tried but no use...i had waited for 30 mins but same boot screen appears...plz help i cannot install any custom roms

teja9490 said:
yes i have tried but no use...i had waited for 30 mins but same boot screen appears...plz help i cannot install any custom roms
Click to expand...
Click to collapse
Try to look here http://forum.xda-developers.com/showthread.php?t=1960080
---------- Post added at 10:13 AM ---------- Previous post was at 09:32 AM ----------
abdul007 said:
hi..buddy am also facing the after i install that smart xperia rom in my neo l i cant get into clockwork mode what and i cant turn on wifi also its showing error and i tried to unlock the bootloader also but it is not working plzz help me how to uninstall that rom i need my stock rom..plsss help.
Click to expand...
Click to collapse
you want to get back you stock rom get the .ftf file here and flash it using flashtool http://talk.sonymobile.com/thread/35239?tstart=0

sralli said:
So abdul you mean to say that- you can enter your rom but you can't enter the cwm recovery and can't turn on your wifi??
Click to expand...
Click to collapse
yes,, i tried to install cwm its showing no space left on device what to do..
nothing i cant do without cwm..
i tried to unlock my bootloader also after i connected to pc its showing waiting for device..
pls help me..
---------- Post added at 02:48 PM ---------- Previous post was at 02:45 PM ----------
ravenwing_15 said:
Try to look here http://forum.xda-developers.com/showthread.php?t=1960080
---------- Post added at 10:13 AM ---------- Previous post was at 09:32 AM ----------
you want to get back you stock rom get the .ftf file here and flash it using flashtool http://talk.sonymobile.com/thread/35239?tstart=0
Click to expand...
Click to collapse
I downloaded that xperia neo l stock rom in that rar i didn't any ftf file...

abdul007 said:
I downloaded that xperia neo l stock rom in that rar i didn't any ftf file...
Click to expand...
Click to collapse
Did you download it successfully?i get my stock rom at that site so i guess you too could get it..try download it again and extract it if still persist use the search bar and search for possible threads.

Here is another link of tutorials and firmwares are also included
Here. :good:

Root Galaxy Star Pro S7262 by my experience

Hi to everyone i was found it and want to share with you (-:
first you need download kingoroot and vroot
http://www.kingoapp.com/android-root/download.htm
http://www.mgyun.com/en/getvroot
connect your phone with usbdebugging enabled
run kingoroot click root let it do his work after a moment device must be restarted and kingoroot say root failed OK
close kingoroot then run vroot and reroot and DONE (-: (-: (-: (-: (-:

what do u mean by odin As boot
what do you mean by odin As boot

Rocked!
rasoulcarrera said:
First flash recovery.tar(tanks to sahaj360) by odin
And i know, it cant go to recovery mode...
turn off the phone ,flash the boot which i attached below via odin AS boot
and itself gone to recovery automatically , you can now install superuser
Click to expand...
Click to collapse
Excellent work bro! Worked very smoothly, you rock!
---------- Post added at 11:50 PM ---------- Previous post was at 11:33 PM ----------
teja11111 said:
what do you mean by odin As boot
Click to expand...
Click to collapse
It means flash the BOOT file as BOOTLOADER in Odin. Here are the steps I did, in detail.
Make sure you have copied the superuser.zip to your SDcard before you begin.
- Flash the recovery as PDA (I unchecked the autoboot, just to keep everything in control)
- Remove data cable
- Remove battery for a few seconds and put it back
- Go in download mode again, and flash the BOOT file as BOOTLOADER (This time, checked the autoboot option)
- Phone starts in CWM recovery
- Flash the SU
In case you're still having trouble, go to http://www.sammobile.com/firmwares/ and search for s7262, download the kernel for YOUR COUNTRY and flash it as PDA through Odin. Then follow the above steps.
Don't forget to thank the guy

zeeshanusuf said:
Excellent work bro! Worked very smoothly, you rock!
---------- Post added at 11:50 PM ---------- Previous post was at 11:33 PM ----------
It means flash the BOOT file as BOOTLOADER in Odin. Here are the steps I did, in detail.
Make sure you have copied the superuser.zip to your SDcard before you begin.
- Flash the recovery as PDA (I unchecked the autoboot, just to keep everything in control)
- Remove data cable
- Remove battery for a few seconds and put it back
- Go in download mode again, and flash the BOOT file as BOOTLOADER (This time, checked the autoboot option)
- Phone starts in CWM recovery
- Flash the SU
Don't forget to thank the guy
Click to expand...
Click to collapse
Your welcome bro...
Tanks for explanation...

rasoulcarrera said:
Your welcome bro...
Tanks for explanation...
Click to expand...
Click to collapse
You're welcome!
That's the least I could do!

Thankyou @rasoulcarrera
Sent from my GT-S7262 using Tapatalk

Woops!
rasoulcarrera said:
Your welcome bro...
Tanks for explanation...
Click to expand...
Click to collapse
Ok so now that we've installed SU, how can we get the old bootloader back? Cu's the phone is just going into recovery now and not booting.
So I'm back on the original kernel. Which doesn't have SU

zeeshanusuf said:
Ok so now that we've installed SU, how can we get the old bootloader back? Cu's the phone is just going into recovery now and not booting.
Click to expand...
Click to collapse
What? There is problem after flashing su file?
Sent from my GT-S7262 using Tapatalk

zeeshanusuf said:
Ok so now that we've installed SU, how can we get the old bootloader back? Cu's the phone is just going into recovery now and not booting.
So I'm back on the original kernel. Which doesn't have SU
Click to expand...
Click to collapse
Try this
Turn off the phone
Pull out the battery
After ten seconds turn on your phone...
Is it helped?

rasoulcarrera said:
Try this
Turn off the phone
Pull out the battery
After ten seconds turn on your phone...
Is it helped?
Click to expand...
Click to collapse
No progress. The screen goes white as soon as the samsung boot sound starts. Any chance you have a copy of the original bootloader? We can flash that after installing SU.
---------- Post added at 01:20 AM ---------- Previous post was at 01:13 AM ----------
updown69 said:
What? There is problem after flashing su file?
Sent from my GT-S7262 using Tapatalk
Click to expand...
Click to collapse
Actually I think it's the bootloader. Just worked fine the first time.. After second boot I'm getting white screen (same thing that used to come previously when I flashed recovery). Let's see if this gets fixed, otherwise this whole operation would just die.
Lesson here is: Cheaper android phones are crap . I'm using an HTC amaze, and it was one hell of a task to root it! But at least it responded to logic.

zeeshanusuf said:
No progress. The screen goes white as soon as the samsung boot sound starts. Any chance you have a copy of the original bootloader? We can flash that after installing SU.
Click to expand...
Click to collapse
Ok in Samsung-update.com site search for this rom
S7262JVUAMK flash it
And then try root your phone by my method

Or if you have your old kernel you can now flash it
And still with SU

rasoulcarrera said:
Or if you have your old kernel you can now flash it
And still with SU
Click to expand...
Click to collapse
Yup, All done!
Thanks man!
@updown69

zeeshanusuf said:
No progress. The screen goes white as soon as the samsung boot sound starts. Any chance you have a copy of the original bootloader? We can flash that after installing SU.
---------- Post added at 01:20 AM ---------- Previous post was at 01:13 AM ----------
Actually I think it's the bootloader. Just worked fine the first time.. After second boot I'm getting white screen (same thing that used to come previously when I flashed recovery). Let's see if this gets fixed, otherwise this whole operation would just die.
Lesson here is: Cheaper android phones are crap . I'm using an HTC amaze, and it was one hell of a task to root it! But at least it responded to logic.
Click to expand...
Click to collapse
bro in white screen condition press power button i.e. first option is reboot now.

please help
rasoulcarrera said:
Or if you have your old kernel you can now flash it
And still with SU
Click to expand...
Click to collapse
i got all white without goint going recovery please help i cant do any thing . if pssible give me your old bootloop please please

vishal.ghodake said:
i got all white without goint going recovery please help i cant do any thing . if pssible give me your old bootloop please please
Click to expand...
Click to collapse
first download this rom http://dl.nikatel.ir/file.flash/sam/S7262JVUAMK4_S7262OJVAMK1_S7262JVUAMI4_Nikatel.ir.rar
flash it and then try root it by the method

rasoulcarrera said:
first download this rom http://dl.nikatel.ir/file.flash/sam/S7262JVUAMK4_S7262OJVAMK1_S7262JVUAMI4_Nikatel.ir.rar
flash it and then try root it by the method
Click to expand...
Click to collapse
Which Rom is it sorry to interrupt? Csc (Region)please? I also want to do a flash.
Sent from my GT-S7262 using Tapatalk

updown69 said:
Which Rom is it sorry to interrupt? Csc (Region)please? I also want to do a flash.
Sent from my GT-S7262 using Tapatalk
Click to expand...
Click to collapse
s7262JVUAMK4_S7262OJVAMK1_S7262JVUAMI4
i think it's must be middle east update

rasoulcarrera said:
s7262JVUAMK4_S7262OJVAMK1_S7262JVUAMI4
i think it's must be middle east update
Click to expand...
Click to collapse
My original CSC is INS (India).
Sent from my GT-S7262 using Tapatalk

updown69 said:
My original CSC is INS (India).
Sent from my GT-S7262 using Tapatalk
Click to expand...
Click to collapse
Not problem you can flash the rom witch I'm upload it
archive include 3 file bootloader,CSC,pda
Flash all by Odin
if you want to keep your CSC just skip it
Just flash bootloader and pda

[Q&A] PHILZ RECOVERY for SPICE MI509

Q&A for PHILZ RECOVERY for SPICE MI509
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for PHILZ RECOVERY for SPICE MI509. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Not working...
Hi "Saurabh" i tried this procedure my Spice MI509 is showing Spice logo "S" and restarting continuously please help me out.

epsan said:
Hi "Saurabh" i tried this procedure my Spice MI509 is showing Spice logo "S" and restarting continuously please help me out.
Click to expand...
Click to collapse
How u flashing this recovery...???
Use mobile uncle tool...
It needs root and then place the recovery in sdcard after renaming It to recovery.img and then open Mobil uncle tool and select install recovery from sdcard and then select the recovery file...
Wait some time and your recovery will work now...
And I want to know that on which android version u r?? Kitkat or jelly bean???

saurabh1234 said:
How u flashing this recovery...???
Use mobile uncle tool...
It needs root and then place the recovery in sdcard after renaming It to recovery.img and then open Mobil uncle tool and select install recovery from sdcard and then select the recovery file...
Wait some time and your recovery will work now...
And I want to know that on which android version u r?? Kitkat or jelly bean???
Click to expand...
Click to collapse
Hey Thanks for reply, i resolved that issue by trying to turn on the phone by usb power, phone boots up normally but without any signal both sims are properly inserted but no signal (may be IMEI issue) how to resolve it???. ( procedure i followed for previous attempt, i am currently on JellyBean my stock android version(people say Mi509 come with KITKAT out of box but its not in case of my phone. i followed your procedure as it is, downloaded attachment and MobileUncle apk installed that apk , opened that uncle and selected recovery update and it automatically restarted.)

now i know that my standard Android Recovery was OVERWRITTEN by custom recovery and i DIDNT backup my stock recovery . what should i do. ( i read something about EFS partition which contains IMEI info which was corrupted by custom recovery i believe ). and also please send me backup of recovery partition (or EFS) to me @ [email protected] i will set my own IMEI nos using Enginering Mode apk . this is my only phone please help me

epsan said:
now i know that my standard Android Recovery was OVERWRITTEN by custom recovery and i DIDNT backup my stock recovery . what should i do. ( i read something about EFS partition which contains IMEI info which was corrupted by custom recovery i believe ). and also please send me backup of recovery partition (or EFS) to me @ [email protected] i will set my own IMEI nos using Enginering Mode apk . this is my only phone please help me
Click to expand...
Click to collapse
thats why i was asking about android version....
bcoz all roms and recovery available for MI509 uses KITKAT kernel and you flashed it on Jellybean...
here i attach the stock recovery of jellybean....
for fixing IMEI use this link.........
This will fix it permanently...
IMEI TOOL with video tutorial....https://docs.google.com/uc?id=0B5DM6ZSz3dh-eTQzV2VWck1Kckk&export=download
Database- http://www.mediafire.com/download/no1oo8rroq4uqtr/Database.rar
use database file from second link bcoz this database is for spice mi509....
and next time dont flash rom if you have jellybean

Hey "Sourabh" did i "bricked" my phone???? and how to overcome that please.............
---------- Post added at 02:44 PM ---------- Previous post was at 02:03 PM ----------
Again Thanks for the reply, i just came to know that..... i should back up efs directory thank you very much for your support, i will let you know the status once i finish all the countermeasures.

epsan said:
Hey "Sourabh" did i "bricked" my phone???? and how to overcome that please.............
---------- Post added at 02:44 PM ---------- Previous post was at 02:03 PM ----------
Again Thanks for the reply, i just came to know that..... i should back up efs directory thank you very much for your support, i will let you know the status once i finish all the countermeasures.
Click to expand...
Click to collapse
If your device I bricked then just flash stock firmware using sp flash tool...if you don't know how to ...
Then give it to service centre but don't tell them about rooting and flashing custom rom...
Bcoz if you tell them then they will cost you money...

saurabh1234 said:
If your device I bricked then just flash stock firmware using sp flash tool...if you don't know how to ...
Then give it to service centre but don't tell them about rooting and flashing custom rom...
Bcoz if you tell them then they will cost you money...
Click to expand...
Click to collapse
Hey "Saurabh" you didddit. i tried using SPFTool and its working i was able to get my imei nos also(but it took me two days to figure it out). NOW how do i upgrade my mobile to KITKAT do you have that rom. can you please send me that link(stock rom).

epsan said:
Hey "Saurabh" you didddit. i tried using SPFTool and its working i was able to get my imei nos also(but it took me two days to figure it out). NOW how do i upgrade my mobile to KITKAT do you have that rom. can you please send me that link(stock rom).
Click to expand...
Click to collapse
Above was mistyping I was writing 'is' but leaved at 'i'. But thats no problem.
Below is stock kitkat firmware....flash through spflashtool...
https://docs.google.com/uc?id=0B1F4thoxIkjEb3pMT0N1UEhmQ00
When flashing firmware is done then root your mobile and install the philz recovery using flashify or mobile uncle tool to install custom rom...

saurabh1234 said:
Above was mistyping I was writing 'is' but leaved at 'i'. But thats no problem.
Below is stock kitkat firmware....flash through spflashtool...
https://docs.google.com/uc?id=0B1F4thoxIkjEb3pMT0N1UEhmQ00
When flashing firmware is done then root your mobile and install the philz recovery using flashify or mobile uncle tool to install custom rom...
Click to expand...
Click to collapse
Thank you very much "Saurabh" it really worked and i am running stock KITKAT now and will change it to custom rom very soon... again Thank you very much :good:

epsan said:
Thank you very much "Saurabh" it really worked and i am running stock KITKAT now and will change it to custom rom very soon... again Thank you very much :good:
Click to expand...
Click to collapse
i am always here to help...
and now i am uploading my new ORIGINAL LOLLIPOP ROM CM12.1 ...
and links will be available in two three days...

Could someone provide backup image of spice MI 509. My phone got stuck in a bootloader while changing font.
Is there any method to come out of the problem. Pls reply.

subash.ateet said:
Could someone provide backup image of spice MI 509. My phone got stuck in a bootloader while changing font.
Is there any method to come out of the problem. Pls reply.
Click to expand...
Click to collapse
download the stock rom from xda firmware site and then use flashtool in that zip to install the firmware in your mi509...it will boot... but u will lost your apps installed earlier...

saurabh1234 said:
download the stock rom from xda firmware site and then use flashtool in that zip to install the firmware in your mi509...it will boot... but u will lost your apps installed earlier...
Click to expand...
Click to collapse
Thanks Saurabh1234 for your reply.
How can I use flashtool in my mobile as it is stucking in bootloader? I can access only Recovery mode ( Power + Vol. down). Is there any method to install the firmware by Recovery mode(Power + Vol. down)?
I had already tried the SP flastool to flash my mobile but the software dont access/ read my mobile.

subash.ateet said:
Thanks Saurabh1234 for your reply.
How can I use flashtool in my mobile as it is stucking in bootloader? I can access only Recovery mode ( Power + Vol. down). Is there any method to install the firmware by Recovery mode(Power + Vol. down)?
I had already tried the SP flastool to flash my mobile but the software dont access/ read my mobile.
Click to expand...
Click to collapse
flashtool will work on your pc and laptop...
download firmware and then install drivers given in it in your pc then open your flashtool and load bootloader...
now connect your device to pc via data cable with or without battery ...
then click on download button in flashtool and press vol down on device.
then update will start..
check this link...
http://forum.xda-developers.com/android/general/rooting-cwm-firmware-spice-stellar-mi-t2969920

Trying to port PhilZ 6.59.0
Can you tell me how you ported PhilZ 6.57.9.......coz i'm trying to port PhilZ 6.59.0

Vodafone VFD1100 Root problem

Can anyone Help me. How to root Vodafone VFD1100 Android 6.0 ...?

I think my vfd1100 is bricked. Help me with the correct mt6580 scatter loading file

VFD 1100
sweet khan said:
Can anyone Help me. How to root Vodafone VFD1100 Android 6.0 ...?
Click to expand...
Click to collapse
Did you manage to root your Tab?

Itachi879 said:
Did you manage to root your Tab?
Click to expand...
Click to collapse
Not yet

sweet khan said:
Can anyone Help me. How to root Vodafone VFD1100 Android 6.0 ...?
Click to expand...
Click to collapse
sweet khan said:
Not yet
Click to expand...
Click to collapse
Please tell me whenyounget it rooted. I want to root mine too

[ROOT] Vodafone VFD 1100
Itachi879 said:
Please tell me when you get it rooted. I want to root mine too
Click to expand...
Click to collapse
Are we really the only 2 people who own a TCL VFD 1100?:crying:

I'm the third then, also struggling. Anyone had any luck?

I am still trying to find a rooting method that works. TCL VFD 1100 has similar hardware to the Pixi 4 (7) 3G so a root method for the Pixi should work. But unfortunately there's nothing for the Pixi too!?
---------- Post added at 01:35 PM ---------- Previous post was at 01:35 PM ----------
not even a custom recovery

Itachi879 said:
I am still trying to find a rooting method that works. TCL VFD 1100 has similar hardware to the Pixi 4 (7) 3G so a root method for the Pixi should work. But unfortunately there's nothing for the Pixi too!?
---------- Post added at 01:35 PM ---------- Previous post was at 01:35 PM ----------
not even a custom recovery
Click to expand...
Click to collapse
bro i tried Alcatel OT Pixi 4-7 3G (9003) is working on VFD1100 i tested .
find here https://forum.xda-developers.com/android/general/alcatel-one-touch-pixi-4-t3376597

sweet khan said:
bro i tried Alcatel OT Pixi 4-7 3G (9003) is working on VFD1100 i tested .
find here https://forum.xda-developers.com/android/general/alcatel-one-touch-pixi-4-t3376597
Click to expand...
Click to collapse
Thank you. I will also give it a try:good:

I have successfully rooted mine. The process steps as follows:
download and port twrp recovery
download disk-info for mappings of mount points
port twrp and flash using spflash tool
download supersu and copy to sdcard
reboot to recovery and click install
navigate to the supersu zip and swipe to confirm
For some reason I can't post links here so I can't give you the links to the twrp and other stuff

Root Failed
sweet khan said:
bro i tried Alcatel OT Pixi 4-7 3G (9003) is working on VFD1100 i tested .
find here https://forum.xda-developers.com/android/general/alcatel-one-touch-pixi-4-t3376597
Click to expand...
Click to collapse
I have tested the trick above and it failed to flash.... is there another way of rooting that you know of?

Itachi879 said:
I have tested the trick above and it failed to flash.... is there another way of rooting that you know of?
Click to expand...
Click to collapse
I can give you the twrp recovery I ported. Then flash it using sp flash tool(assuming you have the scatter loading file).

x3l0r said:
I can give you the twrp recovery I ported. Then flash it using sp flash tool(assuming you have the scatter loading file).
Click to expand...
Click to collapse
i have the scatter loading file... please help

the link to the twrp recovery : https://drive.google.com/open?id=0B0KdQSEH0xo0TV91aUVPOG1wVVE

x3l0r said:
the link to the twrp recovery : https://drive.google.com/open?id=0B0KdQSEH0xo0TV91aUVPOG1wVVE
Click to expand...
Click to collapse
Thank you for the recovery, I have rooted my VDF1100 tablet.

nicolescu1 said:
Thank you for the recovery, I have rooted my VDF1100 tablet.
Click to expand...
Click to collapse
Can you help me please, a step by step guide on how to root my vfd 1100, I do not even know where to start. Please help!
Sent from my VFD 1100 using Tapatalk
---------- Post added at 11:10 PM ---------- Previous post was at 11:02 PM ----------
x3l0r said:
I have successfully rooted mine. The process steps as follows:
download and port twrp recovery
download disk-info for mappings of mount points
port twrp and flash using spflash tool
download supersu and copy to sdcard
reboot to recovery and click install
navigate to the supersu zip and swipe to confirm
For some reason I can't post links here so I can't give you the links to the twrp and other stuff
Click to expand...
Click to collapse
It is over an year now, can you please post the links?
Sent from my VFD 1100 using Tapatalk
---------- Post added at 11:17 PM ---------- Previous post was at 11:10 PM ----------
x3l0r said:
I have successfully rooted mine. The process steps as follows:
download and port twrp recovery
download disk-info for mappings of mount points
port twrp and flash using spflash tool
download supersu and copy to sdcard
reboot to recovery and click install
navigate to the supersu zip and swipe to confirm
For some reason I can't post links here so I can't give you the links to the twrp and other stuff
Click to expand...
Click to collapse
Can you help with the links?
Sent from my VFD 1100 using Tapatalk

not working supersu

My journey to overcome Google's FRP and to root my VFD 1100
Hey guys (and gals). Firstly, I'd like to say that I am a complete novice at rooting phones so this has been a harrowing experience. I have had a real round about experience rooting my VFD 1100. I successfully managed to do it but it took me a whole day and involved soft bricking it (no OS and no ability to access the recovery menu) but I managed to bring it back to life. This is my story.
I have had my device for 10 months but last used it in July. I forgot my unlock pattern and did a factory reset only to find out about the Factory Reset Protection (FRP). I tried using the email address that I previously used on the device and got the 24 hour waiting period message. I didn't read the message propery and tried about 5 times using 3 different email addresses before reading it properly. I then waited 36 hours and still got the 24 message. I then did some research and read somewhere that 3 failed attempts to log into my Google account while still in FRP mode would lock it permanently and only Vodacom (Vodafone in South Africa) could unlock it with a proof of purchase. I was given the tablet as part of my college enrolment so that was out of the question so I looked into re-flashing it.
With lots of research I came across numerous sites (including here) with a step by step process. I downloaded and installed MT65XX preloader drivers (and also had the "This device cannot start (Error 10)" problem and subsequently found out that it didn't matter), TWRP and SPFT. I flashed superuser.zip but while I was there, I fully backed up my device and then formatted everything (including the system partition), not expecting it to remove the operating system and restarted. Well, that was not the greatest idea in the world because all I got after that was "Powered by Android" and nothing else. No OS, no ability to load the recovery tool, NADA! I honestly thought I had bricked the tab.
But I am a stubborn bastard and refused to give up. I found that if I used SPFT and flashed all the firmware including the boot preloader, boot partition, system and all the rest, I should be able to recover the device. I started looking around for an Alcatel Pixi 4 9003 firmware flash file and found LOADS on Indian sites (where the Vodafone VFD 1100 is called the Alcatel Pixi 4) but they were all password protected. I should have just stuck with "Vodafone VFD 1100" cos I got the firmware files, loaded them into SPFT, flashed the device and BOOM! IT WORKED! Straight back to stock. I took a 99.99% bricked device and brought it back to working condition.
All credit has to go to @kirito9 for his post (https://forum.xda-developers.com/showpost.php?p=72282703&postcount=1732). His guide worked perfectly. My device is now rooted and I've even started customising the boot animation and other stuff.

sweet khan said:
Not yet
Click to expand...
Click to collapse
I can help you root your device. Whatsapp me on +2778 2095899

Root J7 Prime G610F

Hello everyone,
I have tried all root metodes on my nougat j7 prime and none of them worked, after installing them with adb sideload when i reboot my phone it doesn't turn on anymore just showing this message...
"Verification Failed, Unable to restart your device. The Integrity verification has failed. You need to reset your device to factory default settings. This will erase all your data."
and an reset button, anytime i press that same thing happen....
And i need over and over again to install stock room through odin
Please guys can u help me to root this ****ty phone

In couple of Minutes i will Help you.
do you Have TWRP installer. ?
---------- Post added at 01:21 AM ---------- Previous post was at 01:07 AM ----------
Here we go.
first go to
Settin/about Phone/sofware Info/tap in compilation number
them go to Developer Option
active OEM LOCKER.
RESTAR THE PHONE.
Install via odin this twrp https://mega.nz/#!lIMzkbSC!4pf0QPOru7TzmX94Ymx7tJ7dCegSUSG535fYjoM6s9k
them with an otg cable install this SUfile. https://mega.nz/#!NQ82nCLR!zl1QCoJDtm40KnHOvk-vWs7CMD2smxywDEEGcZWBQkU
dont restar and go to wipe/format Data/ write YES reboot and u done..

Thank you for your response but is any other method except otg cable, because I dont have one.

brayhanrd said:
In couple of Minutes i will Help you.
do you Have TWRP installer. ?
---------- Post added at 01:21 AM ---------- Previous post was at 01:07 AM ----------
Here we go.
first go to
Settin/about Phone/sofware Info/tap in compilation number
them go to Developer Option
active OEM LOCKER.
RESTAR THE PHONE.
Install via odin this twrp https://mega.nz/#!lIMzkbSC!4pf0QPOru7TzmX94Ymx7tJ7dCegSUSG535fYjoM6s9k
them with an otg cable install this SUfile. https://mega.nz/#!NQ82nCLR!zl1QCoJDtm40KnHOvk-vWs7CMD2smxywDEEGcZWBQkU
dont restar and go to wipe/format Data/ write YES reboot and u done..
Click to expand...
Click to collapse
Thanks man but do you have any other method bcs i dont have an otg cable

I just get the otg cable tried what you say but no supersu app is showing in my phone

Have you tried CF auto root? https://forum.xda-developers.com/ga...ot-cf-auto-root-j7-prime-sm-g610f-sm-t3656072

Andrea_19 said:
I just get the otg cable tried what you say but no supersu app is showing in my phone
Click to expand...
Click to collapse
Try some time. Yesterday i get problem having SUPERSU. Dont forget to Wipe. With the methid i discribe be4. It work.

PewPewGG said:
Have you tried CF auto root? https://forum.xda-developers.com/ga...ot-cf-auto-root-j7-prime-sm-g610f-sm-t3656072
Click to expand...
Click to collapse
This root is for 6.0.1 I don't think it will work on 7.0 but anyway thanks

brayhanrd said:
Try some time. Yesterday i get problem having SUPERSU. Dont forget to Wipe. With the methid i discribe be4. It work.
Click to expand...
Click to collapse
Thanks man i just root it with your file but i install it from internal now im rooted finally.... And i have another question bcs i have 2 years without having one android i just come back with this pho e and I wana know if i need to unlock bootloader to install customs rooms and if yes can you show me an tutorial or send me a link....

Andrea_19 said:
Thanks man i just root it with your file but i install it from internal now im rooted finally.... And i have another question bcs i have 2 years without having one android i just come back with this pho e and I wana know if i need to unlock bootloader to install customs rooms and if yes can you show me an tutorial or send me a link....
Click to expand...
Click to collapse
With the 610XX model u just unlock Bootloader when u mark OEM unlock. Before flash root and recovery.
So u can use any custom Rom.

Andrea_19 said:
This root is for 6.0.1 I don't think it will work on 7.0 but anyway thanks
Click to expand...
Click to collapse
What about Magisk? Or you can use EliteRom for j7 Prime, it's a bloatware-free stock rom with pre-rooted Magisk.
If you decide to install it, you can follow these steps. It doesn't require OTG cable don't worry
https://forum.xda-developers.com/ga...gat-g610xx-t3671640/post73967712#post73967712

do I just flash it with odin? then done?
im a noob sorry