Hey, guys I hope someone can help me:
I have a Samsung galaxy s , and I want to return to a original firmware so I tried to flash it with odin, but I encountered a problem:
When I enter in download mode and connect the USB cabble Odin doesn't see my device, I am desperate, please someone help me!
Sounds like it could be a driver issue. Check to see if you have the latest Samsung drivers.
Yes I have the latest Samsung drivers
i have a dead Movistar i9003 galaxy that doesn't access to the download mode using 3 buttons, & connecting it through usb to pc that later detects only "omap 3630" & requests omap 3630 driver, i'm wondering if there's any way to get access to download mode.., any help will be appreciated.
same problem ..............
need help
hello guys i need help beacuse my phon won't connect i had use many cables and pc but the phone always prompt to me the usb mode but the pc won't recognize the phone plzzzzzzzzzzzzzzzzzzzzzz help :crying:
Hi I was wondring if i an borrow anybodys usb jig because I bricked my samsung galaxy tab 3 lite. If possible please respond
hello friends I have a problem with my samsung tab 2 SGH - i497 when trying to install a custom recovery through the application Install TWRP , now my tab will not start, or load, nor can enter into recovery mode or download mode , please ayudenme I can do to fix it .
Hello,
If your device will not charge, will not boot to any of its modes, has no LED when connected to charger or PC, does not vibrate when power is pressed, will not connect to PC or is not recognized by PC, then unfortunately the device is probably hard bricked and is dead.
There is a chance that a Samsung USB Jig will help you boot it to download mode, they can be found on eBay for $3-5 US. If you get a Jig, insert it in the microUSB port on the device, if it works, it will force the device into download mode and you can then connect to PC and flash your stock firmware or possibly only the stock recovery to replace the custom recovery that bricked your device to recover the device if you are lucky. There may or may not be some other steps required after getting the device recovered to get it correctly repaired, or you might get lucky.
If that doesn't work, then your only other option is to send it in for JTAG service at the repair shop of your choice, you can find them with a Google Search.
Your device probably has a locked bootloader, as do most Samsung devices in the past 2-3 years. Attempting to flash these devices with locked bootloaders with anything other than the devices' current stock firmware or newer results in a permanently bricked device, some can be recovered but not in all cases.
In the future, regardless of how familiar you are with android and flashing, always familiarize yourself with these kinds of details about your specific model number before you do anything to your device. Good luck.
hello friend thanks for replying, I'll try what you tell me usb jig to force download mode, but the problem will be the entry is different from a normal samsung, it is wider, similar to an iPhone...
luishuiza said:
hello friend thanks for replying, I'll try what you tell me usb jig to force download mode, but the problem will be the entry is different from a normal samsung, it is wider, similar to an iPhone...
Click to expand...
Click to collapse
Try something like this along with the USB jig.
Samsung Tab USB adapter
Connect the adapter to your Tab then connect the USB jig to the adapter. If the jig is going to help you that will work.