Hi all
I've flashed TWRP 3.0 and want now to flash Cyanogenmod 13. I've tried two version.
May on each version TWRP says wrong version. This device is zeroflte. Which one
is the right one for this Device (SM-G920F - zeroflte - without Edge)?
Thx for your help
kistenstein
I wouldn't recommend to flash any of these Builds as a primary rom because dont function 100%
Related
Hello xda members,
i have a a31 Majestic tab 110n (i know bad choice), it has never been updated and the stock sofware sucks really bad. So i tried to install a custom recovery and ROM, Cm 10.2 from Christian Troy. I tried to flash from zip. sdcard TWRP for ONDA v792 but the touch didn't work. so i tried to install latest CWM and didnt get trough either. I couldnt flash with odin and phoenix cause locked bootloader. I ask you if there is a custom recovery and rom i can flash.
I hope i can get some answer here. i would really appreciate it. if there is any developer that can develope a compatible recovery i would pay him for sure.
I POST HW INFORMATION:
MOD. TAB 110N
PROC QuadCore A31Series
Android version 4.2.2
FIRMWARE VERSION 3.2_20130717
KERNEL VERSION 3.3.0
BUILD NUMBER A31S_Q1001L3_1307286.20130730
I want to MotoG 1039 update to CM13 now there cm12.1 on the devices.
If I cm13 + gapps installed in TWRP 2.8.7.0 and reboot I get to see that according to Andriod is updated. Then the devices will reboot and stand them in a boot loop.
Have 41.1A bootloader and TWRP 2.8.7.0
What am I doing wrong
You have moto g aka peregrine (the model with 4G connection) you have installed cm13 nightly for falcon? Try this ROM
http://forum.xda-developers.com/moto-g/4g-development/rom-beanstalk-6-03-12-27-2015-t3280520
I have peregrine(XT1039) device. Have the proper install are those that the site and the OTA update file from CM12.1.
But I will install this rom but rather I CM ROM
hi
did something wrong and bricked my 64g opo, managed to unbrick it from advise on here but its stuck on color os, i have been trawling here and trying things all afternoon with no success. is there a certain rom i need to start with?
i have twrp
thanks for looking
done now
You have to tell which twrp version
And color os roms flash their own firmware so you would have to flash latest cm nightly or firmware zips in general section
TWRP should not be 2.8.7.0 it has some problems with firmware flashing.
I recommend unofficial 2.8.6.0 or the newest 3.0.2.0
kunal1540 said:
You have to tell which twrp version
And color os roms flash their own firmware so you would have to flash latest cm nightly or firmware zips in general section
TWRP should not be 2.8.7.0 it has some problems with firmware flashing.
I recommend unofficial 2.8.6.0 or the newest 3.0.2.0
Click to expand...
Click to collapse
thanks
twrp is 2.8.5.1
any pointers to the right place to look
Flash twrp 2.8.6 official and flash COS 12.1 OR 13 signed zip ( twtp flashable )Whichever you want , you are up to date now.
Hello Everyone
I have installed TWRP 3.1.0 on my galaxy s2 and also Lineage 14.1 . So far so good . It wasn't that hard to install custom rom and recovery but i got an issue which is upgrading TWRP 3.1.0 to the latest version 3.2.3 . I did everything correct but it just does not update to latest version. Once i installed the recovery image then rebooted , TWRP disappeared and stock recovery showed up. I also installed TRWP app (installed img and flash to recovery etc.. ) as well but nothing worked.
My question is does Galaxy s2 support latest TWRP or is there anything else that i should do ? Please if you can share any solution to solve this or any suggestion to update TWRP to latest version.
Thank you
galaxys2ci said:
Hello Everyone
I have installed TWRP 3.1.0 on my galaxy s2 and also Lineage 14.1 . So far so good . It wasn't that hard to install custom rom and recovery but i got an issue which is upgrading TWRP 3.1.0 to the latest version 3.2.3 . I did everything correct but it just does not update to latest version. Once i installed the recovery image then rebooted , TWRP disappeared and stock recovery showed up. I also installed TRWP app (installed img and flash to recovery etc.. ) as well but nothing worked.
My question is does Galaxy s2 support latest TWRP or is there anything else that i should do ? Please if you can share any solution to solve this or any suggestion to update TWRP to latest version.
Thank you
Click to expand...
Click to collapse
Are you using iso-rec recovery?
There is a specific combination that is required to flash TWRP on your device.
I'm assuming that you have used the re-PIT created by @Lanchon, since you have LOS installed. The way the recovery is handled on your device is it is packaged into the kernel bundle, I believe, so it isn't flashed to the stock recovery partition, it is flashed in another location where the iso-rec recovery was originally flashed. When you tried to update your TWRP, you probably corrupted how that is structured and it reverted back to stock recovery instead of booting TWRP because, as far as I know, the stock recovery is still installed in its native recovery partition, even after flashing iso-rec recovery. Find an updated iso-rec version of TWRP for i9100
Sent from my LGL84VL using Tapatalk
TWRP issue for galaxy s2 i9100
Hi Droidriven
Thank you very much for responding my message , i'm using iso-rec recovery 3.1.0 right now and i followed these steps to install it ;
1 - I9100 _1.5GB system _6gb data _ 512MB PRE-LOAD by gangster .pit
2 - IP KERNEL 14-03-CWM - FOR + ODIN ( via odin )
and then
lanchon 20160406 I9100 + twrp 3.1.0 .
I did everything correct with istallation of twrp 3.1.0 and LOS
I'm wondering how can i upgrade twrp 3.1.0 to 3.2.3 ?
I thought galaxy s2 does not support latest version of twrp recovery . TWRP 3.1.0 is the only latest version that works for galaxy s2. Is that correct or is there any other way to update twrp to latest version on galaxy s2 ? Because i installed twrp app , did everything ( flashing img rebooting etc. ) it did not update to latest version. Please can you tell me if you know how to upgrade to latest version . i'll be appreciated . Thanks again for responding .
Have a nice day.
Thank you
galaxys2ci said:
Hi Droidriven
Thank you very much for responding my message , i'm using iso-rec recovery 3.1.0 right now and i followed these steps to install it ;
1 - I9100 _1.5GB system _6gb data _ 512MB PRE-LOAD by gangster .pit
2 - IP KERNEL 14-03-CWM - FOR + ODIN ( via odin )
and then
lanchon 20160406 I9100 + twrp 3.1.0 .
I did everything correct with istallation of twrp 3.1.0 and LOS
I'm wondering how can i upgrade twrp 3.1.0 to 3.2.3 ?
I thought galaxy s2 does not support latest version of twrp recovery . TWRP 3.1.0 is the only latest version that works for galaxy s2. Is that correct or is there any other way to update twrp to latest version on galaxy s2 ? Because i installed twrp app , did everything ( flashing img rebooting etc. ) it did not update to latest version. Please can you tell me if you know how to upgrade to latest version . i'll be appreciated . Thanks again for responding .
Have a nice day.
Thank you
Click to expand...
Click to collapse
I don't think you can use the standard version of TWRP that would be downloaded from the TWRP website or via the TWRP Manager app. It has to a TWRP that has been made to be compatible with iso-rec recovery/kernel.
If you still have the file that you used to install iso-rec TWRP 3.1.0, maybe you can extract that file, remove the 3.1.0 .img and replace it with the latest TWRP.img then rezip the file and try flashing that.
Sent from my LGL84VL using Tapatalk
Hi Droidriven
To be honest i've never thought about extracting file , removing the img and replacing with the latest one. That is a good idea actually . Maybe It could work . I'll try that.
Thank you so much for your quick replies. You have been great and helpful. I really appreciate that.
Thanks again
Have a nice day.
Hi, i tryed to flash the stock rom because after the trwp flash, the phone get stuck in a boot loop blinking the first samsung logo, but after trying flash the stock, it says that the device binary is 9 and the rom is 8, but i cant find the binary 9 rom in any place, only 8. I have the trwp installed, so I was thinking if I format all data (system and files) and try to flash again, it will work ?
Also im from Brazil (SM-J701MT), and the device was buyed in Paraguay (SM-J701M) too. Should i install the SM-J701MT ROM right ?
The rom that i trying to flash is J701MTVJS8CTA1
I hope I help you in this
hey friend i am new to xda but according to i understand in mexico there is a binary 9 for the j7 neo i see you have the name of the page is ""SamFw ""there you can enter:risa: the model and see
I recommend flashing the M variant because as the device is that Variant I don't know if it affects you to flash a MT variant and I understand that the model is a J7 Neo
I hope it helps you and to avoid mistakes use the last odin
ehm i don't know much english too and i'm not very active let us say XD
I will refer you to my input on this thread:
https://forum.xda-developers.com/gal...7#post83006479