Hello all,
I am currently facing an issue with a Jeep J6 that has a MT6582 chip.
I read a lot of threads but still could not get the phone to flash.
The current state of the phone is:
Black Screen - Will not Boot or show anything on screen.
When connected to PC i get MediaTeck USB Port that keeps connecting and disconnecting once at 2 seconds
I managed to get SP Flash to go to Red Line but stops with error s_ft_enable_dram_fail (4032)
I searched over google and was told that the firmware is not compatible ? That's kid of odd because the i think the firmware is what it must be.
Downloaded the rom from http://www.needrom.com/download/jeep-j6/
The error is on both firmware's... Out of ideas...
Any one faced something similar ?
Thank you,
Alex
Related
Hey there, my cubot gt99 (MTK 6589) is ****ting bricks. I cant really do anything on him. Its doesnt power on, the blue battery led doesnt even show up.
I think I might have flashed the wrong preloader and now I'm getting this error:
Code:
brom error s_ft_enable_dram_fail (4032)
The thing is, I've downloaded the stock rom from the main site and this error keeps happening.
Is there any thing I can do or this is way out of my knowledge? D:
Best regards and I'd really appreciate some feed back even bad ideas are welcome
Hi All,
This is my first post, so take it easy on me pls..
I need help flashing a hard bricked phone.
The phone wont turn on and when i flash a rom, after
20-55 seconds with a 100% red bar i get a brom error 4032.
I have a Jiayu S3 Advanced mtk6752 shipped with kitkat
And i flashed a android 5.0 stock rom with sp flash tool.
After not using for a while and replacing a cracked screen. My phone restarts itself and it was soft bricked.
Then i flashed the wrong rom it was a rom for Jiayu S3+ mtk6753 and now its hard bricked. I did everything i can find on the internet except making a jumper on the motherboard. Please help.
Let me explain what exactly happended.
I bought the china phone and on the first day that i got it i flashed a android lollipop 5.0 stock rom with sp flash tool. After that i used it for a month or so. Then i cracked the screen and the screen wasnt responding. After 3 months not using the phone i ordered a new screen with lcd and i replaced it.
I used the phone for 2 days and suddenly the phone restarts itself when i was playing music. After restart i was stuck on the logo. After restarting the phone again it was again stuck at the logo.
I tried to flash my phone again, but used the wrong rom.
It was a Jiayu S3+ mtk 6753 android 5.1 lollipop stock rom. I tried everything reinstalling drivers with usbdeview and device manager. Tried flashing different. Stock roms. Tried different key combinations. Sp flash works and can see the phone when flashing a rom but stops after 20-55 seconds with a 100% red bar and a brom error 4032 pops up. I saw on the interwebs that i make a jumper on my motherboard but i cant find lcolo or something like that. Please help..
Thank you in advance
Hi All,
This is my first post, so take it easy on me pls..
I need help flashing a hard bricked phone.
The phone wont turn on and when i flash a rom, after
20-55 seconds with a 100% red bar i get a brom error 4032.
I have a Jiayu S3 Advanced mtk6752 shipped with kitkat
And i flashed a android 5.0 stock rom with sp flash tool.
After not using for a while and replacing a cracked screen. My phone restarts itself and it was soft bricked.
Then i flashed the wrong rom it was a rom for Jiayu S3+ mtk6753 and now its hard bricked. I did everything i can find on the internet except making a jumper on the motherboard. Please help.
Let me explain what exactly happended.
I bought the china phone and on the first day that i got it i flashed a android lollipop 5.0 stock rom with sp flash tool. After that i used it for a month or so. Then i cracked the screen and the screen wasnt responding. After 3 months not using the phone i ordered a new screen with lcd and i replaced it.
I used the phone for 2 days and suddenly the phone restarts itself when i was playing music. After restart i was stuck on the logo. After restarting the phone again it was again stuck at the logo.
I tried to flash my phone again, but used the wrong rom.
It was a Jiayu S3+ mtk 6753 android 5.1 lollipop stock rom. I tried everything reinstalling drivers with usbdeview and device manager. Tried flashing different. Stock roms. Tried different key combinations. Sp flash works and can see the phone when flashing a rom but stops after 20-55 seconds with a 100% red bar and a brom error 4032 pops up. I saw on the interwebs that i make a jumper on my motherboard but i cant find lcolo or something like that. Please help..
Thank you in advance
rudycroes said:
Hi All,
This is my first post, so take it easy on me pls..
I need help flashing a hard bricked phone.
The phone wont turn on and when i flash a rom, after
20-55 seconds with a 100% red bar i get a brom error 4032.
I have a Jiayu S3 Advanced mtk6752 shipped with kitkat
And i flashed a android 5.0 stock rom with sp flash tool.
After not using for a while and replacing a cracked screen. My phone restarts itself and it was soft bricked.
Then i flashed the wrong rom it was a rom for Jiayu S3+ mtk6753 and now its hard bricked. I did everything i can find on the internet except making a jumper on the motherboard. Please help.
Let me explain what exactly happended.
I bought the china phone and on the first day that i got it i flashed a android lollipop 5.0 stock rom with sp flash tool. After that i used it for a month or so. Then i cracked the screen and the screen wasnt responding. After 3 months not using the phone i ordered a new screen with lcd and i replaced it.
I used the phone for 2 days and suddenly the phone restarts itself when i was playing music. After restart i was stuck on the logo. After restarting the phone again it was again stuck at the logo.
I tried to flash my phone again, but used the wrong rom.
It was a Jiayu S3+ mtk 6753 android 5.1 lollipop stock rom. I tried everything reinstalling drivers with usbdeview and device manager. Tried flashing different. Stock roms. Tried different key combinations. Sp flash works and can see the phone when flashing a rom but stops after 20-55 seconds with a 100% red bar and a brom error 4032 pops up. I saw on the interwebs that i make a jumper on my motherboard but i cant find lcolo or something like that. Please help..
Thank you in advance
Click to expand...
Click to collapse
Hello,
Please try posting your query here Ask any Query Newbie friendly with all relevant details, the experts there maybe able to assist you.
-Vatsal
Please I need some working link to ROM to this phone , I tried lots of roms and always says "Enable DRAM Failed", drivers are alright and preloader working(appears in device manager). i tried also firmware upgrade but nothing works I think because this mobile is clone and has different rom from original A850. As you can see at the front of mobile is placed home not lenovo logo (at down in middle of digitizer) . Also tried different version of SP Flash tools but all said the same error. In other way I tried push buttons before connecting to pc still the same. I check the procesor and is MTK6582, has kcolo point but preloader working so its dont needed now. Thank for your time and hope somebody for help!
back of phone https://postimg.org/image/h7igdxesz/
Front of phone https://postimg.org/image/6ypz83qr7/
Battery case https://postimg.org/image/8f1hq8to3/
Placeboard(DPS) https://postimg.org/image/bn5z3afxv/
Hello everyone, I hope you are very well.
A few days ago, a family brought me a phone to try to fix it, it is an LG MS330.
The phone turns on, shows the typical LG logo and after a few seconds it shows the message:
Security Error
[Authentication Fail # 9] [MODIFIED]
Click to expand...
Click to collapse
Which makes me think that someone installed an unofficial firmware on it and was what caused the problem. Everything normal up to here, the real problem happens when I try to flash the device through the download mode, where it shows me the following error:
Secure booting Error!
Error code : 1009
MODIFIED !!
Click to expand...
Click to collapse
After a few seconds of throwing this error, the phone automatically shuts down and restarts.
The real problem is that it does not let me under any circumstances flash the firmware of the phone and I also cannot create the connection between the computer and the phone to be able to flash it.
I have tried various programs such as LG Flash Tool, LG UP, LG Mobile Support and have not been successful with any.
Could anyone help me please?
I really don't know what to do at this point anymore. Does the phone have salvation? Is there something that can be done?