Hi!
Some days ago my phone's battery has just died, I was charging it all night, but when I tried to turn it on it started to Bootloop. Then I was trying to flash the original sony system, but the Sony Flashtool program needs to have USB Debugging to be on. On my phone it wasn's turned on, so Im stock at this point, I cant flesh the thing on my E3. I would really appreciate If you would help me if you can.
So the main question is: how can I solve the problem about USB Debugging if the phone is softbricked?
Sony Flashtool: 21/039/2016 13:39:03 - INFO - Device connected with USB debugging off
21/039/2016 13:39:03 - INFO - For 2011 devices line, be sure you are not in MTP mode
I was trying to connect my phone in flash mode, but it failed because of not having USB Debugging on. Is there any way to enable USB Debugging if the phone is softbricked?
d2203 CM11 same problem
28/059/2016 15:59:49 - ERROR - root : this bundle is not valid
28/059/2016 15:59:50 - INFO - Connected device : Sony Xperia E3
28/059/2016 15:59:51 - INFO - Installed version of busybox : BusyBox v1.22.1 bionic (2015-03-01 19:43 +0100) multi-call binary.
28/059/2016 15:59:51 - INFO - Android version : 4.4.4 / kernel version : 3.4.0-ga7df298 / Build number : KTU84Q
28/059/2016 15:59:52 - INFO - Checking root access
28/059/2016 15:59:58 - INFO - Root Access Allowed
28/059/2016 15:59:59 - INFO - Installing toolbox to device...
28/059/2016 15:59:59 - INFO - Pushing C:\Flashtool\custom\root\ftkit.tar to /data/local/tmp
28/000/2016 16:00:00 - INFO - Running installftkit as root thru sysrun
28/000/2016 16:00:38 - INFO - Device connected in fastboot mode
28/000/2016 16:00:58 - INFO - Device disconnected
28/001/2016 16:01:19 - INFO - Device connected with USB debugging off
28/001/2016 16:01:19 - INFO - For 2011 devices line, be sure you are not in MTP mode
Hi !
I have the same problem.
Do you solve this ??
No, I couldnt solve the problem, I bought a chineese phone, instead of trying to fix.
Im sorry about yours.
Related
Hello. I'm new at this great forum. Excuse my english, I'm from Spain. Several days trying to solve my problem, reading at google, forums, etc. This is the matter:
I bought recently an Xperia ray, bootloader blocked, updated to 4............62 Then, I realised that this firmware cannot be rooted. So I`ve downloaded previous firmwares, 042 and 058 and tried to flash via flashtool so as to revert my 062 firmware to those 042 or 058. but there is no way to flash. I start flashing with the phone switched off and ge this message:
05/009/2012 14:09:30 - INFO - <- This level is successfully initialized
05/009/2012 14:09:31 - INFO - Flashtool Version 0.6.6 built on 2012-01-08 19:34:23
05/009/2012 14:09:42 - INFO - Selected Xperia Ray (ST18i)_4.0.2.A.0.42_CE.ftf
05/009/2012 14:09:42 - INFO - Preparing files for flashing
05/009/2012 14:09:49 - INFO - Device disconnected
05/010/2012 14:10:18 - INFO - Please connect your device into flashmode.
05/011/2012 14:11:04 - INFO - Device connected with USB debugging off
05/011/2012 14:11:04 - INFO - For 2011 devices line, be sure you are not in MTP mode
However, I previously put USB debugging on, for sure.
Then, I tried conecting USB cable with the phone switched on, and get this message:
05/045/2012 13:45:03 - INFO - <- This level is successfully initialized
05/045/2012 13:45:03 - INFO - Flashtool Version 0.6.6 built on 2012-01-08 19:34:23
05/045/2012 13:45:11 - INFO - Device disconnected
05/045/2012 13:45:14 - INFO - Selected X10_V1_BLRelock.ftf
05/045/2012 13:45:14 - INFO - Preparing files for flashing
05/045/2012 13:45:14 - INFO - Please connect your device into flashmode.
05/046/2012 13:46:23 - INFO - Device connected with USB debugging on
05/046/2012 13:46:27 - INFO - Connected device : ST18
05/046/2012 13:46:27 - INFO - Installed version of busybox : N/A
05/046/2012 13:46:27 - INFO - Android version : 2.3.4 / kernel version : 2.6.32.9-perf
After that, no further actions, and no flash done. I dont know what else i can do. Help, please. I also tried using different usb ports, with no result.
Thanks in advance.
Problem solved.
Thanks.
dude i'm facing the same issue.. what did you do to resolve it????
katuss said:
dude i'm facing the same issue.. what did you do to resolve it????
Click to expand...
Click to collapse
well, you have to put your phone in download mode don't start flashing with phone off/on
look here on your phone should be the same procedure just search before to post
Hello,
i cant turn on my x10, it just vibrate and the screen is black, i have tried to reinstal firmware by seus but it told me that it couldnt do it (some error) than i tried to flash it but it need usb debbuging on even if its in flah mode. I tried more roms but non was working. Is there a solution? thanks for answer.
From one of the tried flashing.
11/000/2012 15:00:27 - INFO - <- This level is successfully initialized
11/000/2012 15:00:28 - INFO - Flashtool Version 0.6.7.0 built on 2012-01-21 17:31:40
11/000/2012 15:00:28 - INFO - You can drag and drop ftf files here to start flashing them
11/000/2012 15:00:37 - INFO - Device connected with USB debugging off
11/000/2012 15:00:37 - INFO - For 2011 devices line, be sure you are not in MTP mode
11/001/2012 15:01:05 - INFO - Selected Sony Ericsson X10i_2.1.A.435_GLOBAL-GGL GENERIC 1232-9897.ftf
11/001/2012 15:01:05 - INFO - Preparing files for flashing
11/001/2012 15:01:05 - INFO - Please connect your device into flashmode.
11/001/2012 15:01:06 - INFO - Opening device for R/W
11/001/2012 15:01:06 - INFO - Start Flashing
11/001/2012 15:01:06 - ERROR -
11/001/2012 15:01:06 - ERROR - Error flashing. Aborted
11/001/2012 15:01:06 - INFO - Device connected with USB debugging off
11/001/2012 15:01:06 - INFO - For 2011 devices line, be sure you are not in MTP mode
I'm on Windows 8.1 x64, installed all drivers correctly, and when I connect my device with flashtool I receive this error:
23/052/2014 13:52:39 - INFO - Device connected with USB debugging on
23/052/2014 13:52:39 - ERROR - Cannot identify your device.
So Flashtool says me to select a device from the list. When I select the Xperia L, he shows that:
23/052/2014 13:52:56 - INFO - Device connected with USB debugging off
23/052/2014 13:52:56 - INFO - For 2011 devices line, be sure you are not in MTP mode
23/052/2014 13:52:57 - INFO - Device connected with USB debugging on
23/052/2014 13:52:57 - INFO - Connected device : Sony Xperia L
23/052/2014 13:52:58 - INFO - Installed version of busybox : BusyBox v1.22.1-Stericson (2014-01-25 17:27:18 CET) multi-call binary.
23/052/2014 13:52:58 - INFO - Android version : 4.1.2 / kernel version : 3.4.0-g138bbe3-00026-gb931ad7-dirty / Build number : 15.0.A.2.17
23/052/2014 13:52:58 - INFO - Checking root access
23/052/2014 13:52:59 - INFO - Root Access Allowed
23/053/2014 13:53:00 - INFO - Stopping ric service
23/053/2014 13:53:00 - INFO - ric service stopped successfully
I can reboot my phone with Flashtool, install busybox, etc.
But when I try to flash a firmware, it says me to install the driver and the flash fails.
How to solve this?
Have you installed fastboot and flashmode driver
When time comes.. The world Ll knoe
I have a st26i with bootloader unlocked,and was installing cwm (boot.img)
And this error occurs
21/008/2014 10:08:09 - INFO - Device connected with USB debugging on
21/008/2014 10:08:09 - INFO - Connected device : Sony Xperia J
21/008/2014 10:08:09 - INFO - Installed version of busybox : BusyBox v1.20.2-Stericson (2012-07-04 21:33:31 CDT) multi-call binary.
21/008/2014 10:08:09 - INFO - Android version : 4.1.2 / kernel version : 3.4.0 / Build number : 11.2.A.0.31
21/008/2014 10:08:09 - INFO - Checking root access
21/008/2014 10:08:15 - INFO - Root Access Allowed
21/010/2014 10:10:21 - INFO - Device disconnected
21/010/2014 10:10:35 - INFO - Device connected in flash mode
21/010/2014 10:10:47 - ERROR - This action can only be done in fastboot mode
21/011/2014 10:11:18 - INFO - Device disconnected
Click to expand...
Click to collapse
Before I flash without any problem, it is only today that the problem occurred.
I'm using version 0.9.16.1 of FlashTool
Anyone know how to solve this problem?
Thanks
Hello,
I've flashed my Xperia L once or twice some time ago, now I just wanted to try out some of the new goodies, not just stay on the cursed 4.2.2. I have it all set up correctly software-wise, yet whenever I run Flashtool (version 9.19.8( and try to Volume-Down connect my phone, it get's problematic. Yeah, the phone does connect in flash mode, yet after a couple dozen seconds it simply disconnects as if I had manually unplugged it. Phone restarts and gets connected to PC the standard-way.
Now, is it that Flashtool automatically cuts off the connection after some time, or my cable or socket(s) are faulty? I thought it had something to do with having moved cable a tiny bit and connection being lost but now, I have tried again, ensuring no movement will be involved and it just disconnected again. I did also check all my laptop's USB ports, also bought a USB HUB and checked it. Did check two different cables, one for some Nokia, I think, no results.
Here's flashtool log.
Code:
18/043/2017 15:43:31 - INFO - Device connected in flash mode
18/044/2017 15:44:32 - INFO - Device disconnected
18/045/2017 15:45:22 - INFO - Device connected with USB debugging on
18/045/2017 15:45:22 - ERROR - root : this bundle is not valid
18/045/2017 15:45:23 - INFO - Connected device : Sony Xperia L
18/045/2017 15:45:23 - INFO - Installed version of busybox : BusyBox v1.20.2-jb static (2012-11-25 17:47 +0100) multi-call binary.
18/045/2017 15:45:23 - INFO - Android version : 4.2.2 / kernel version : 3.4.0-g74b701b-00054-gde56c65-dirty / Build number : 15.3.A.1.17
18/045/2017 15:45:23 - INFO - Checking root access
18/046/2017 15:46:04 - INFO - Root Access Allowed
18/046/2017 15:46:04 - INFO - Stopping ric service
18/046/2017 15:46:20 - INFO - ric service stopped successfully
Any ideas?
Renagrds,
Greg
Gregoric said:
Hello,
I've flashed my Xperia L once or twice some time ago, now I just wanted to try out some of the new goodies, not just stay on the cursed 4.2.2. I have it all set up correctly software-wise, yet whenever I run Flashtool (version 9.19.8( and try to Volume-Down connect my phone, it get's problematic. Yeah, the phone does connect in flash mode, yet after a couple dozen seconds it simply disconnects as if I had manually unplugged it. Phone restarts and gets connected to PC the standard-way.
Now, is it that Flashtool automatically cuts off the connection after some time, or my cable or socket(s) are faulty? I thought it had something to do with having moved cable a tiny bit and connection being lost but now, I have tried again, ensuring no movement will be involved and it just disconnected again. I did also check all my laptop's USB ports, also bought a USB HUB and checked it. Did check two different cables, one for some Nokia, I think, no results.
Here's flashtool log.
Code:
18/043/2017 15:43:31 - INFO - Device connected in flash mode
18/044/2017 15:44:32 - INFO - Device disconnected
18/045/2017 15:45:22 - INFO - Device connected with USB debugging on
18/045/2017 15:45:22 - ERROR - root : this bundle is not valid
18/045/2017 15:45:23 - INFO - Connected device : Sony Xperia L
18/045/2017 15:45:23 - INFO - Installed version of busybox : BusyBox v1.20.2-jb static (2012-11-25 17:47 +0100) multi-call binary.
18/045/2017 15:45:23 - INFO - Android version : 4.2.2 / kernel version : 3.4.0-g74b701b-00054-gde56c65-dirty / Build number : 15.3.A.1.17
18/045/2017 15:45:23 - INFO - Checking root access
18/046/2017 15:46:04 - INFO - Root Access Allowed
18/046/2017 15:46:04 - INFO - Stopping ric service
18/046/2017 15:46:20 - INFO - ric service stopped successfully
Any ideas?
Renagrds,
Greg
Click to expand...
Click to collapse
First of all, you should check this thread:
https://forum.xda-developers.com/showpost.php?p=70833785&postcount=304
There, I've said that you should just use older versions of flashtool for XL, like v0.9.18.4 !
If it doesn't solve your problem, then you should flash the ROM , right after you connect the phone to pc, as fast as you can!
And note that if it disconnects again, do nothing, just unplug the phone and wait untill the progress bar is completed and rom is prepared for flashing, then it again asks to connect the phone, and you connect it and wait untill it Finnishes
It happened for me too, and with this method, I've flashed the ROM successfully!