Hello. I'm new at this great forum. Excuse my english, I'm from Spain. Several days trying to solve my problem, reading at google, forums, etc. This is the matter:
I bought recently an Xperia ray, bootloader blocked, updated to 4............62 Then, I realised that this firmware cannot be rooted. So I`ve downloaded previous firmwares, 042 and 058 and tried to flash via flashtool so as to revert my 062 firmware to those 042 or 058. but there is no way to flash. I start flashing with the phone switched off and ge this message:
05/009/2012 14:09:30 - INFO - <- This level is successfully initialized
05/009/2012 14:09:31 - INFO - Flashtool Version 0.6.6 built on 2012-01-08 19:34:23
05/009/2012 14:09:42 - INFO - Selected Xperia Ray (ST18i)_4.0.2.A.0.42_CE.ftf
05/009/2012 14:09:42 - INFO - Preparing files for flashing
05/009/2012 14:09:49 - INFO - Device disconnected
05/010/2012 14:10:18 - INFO - Please connect your device into flashmode.
05/011/2012 14:11:04 - INFO - Device connected with USB debugging off
05/011/2012 14:11:04 - INFO - For 2011 devices line, be sure you are not in MTP mode
However, I previously put USB debugging on, for sure.
Then, I tried conecting USB cable with the phone switched on, and get this message:
05/045/2012 13:45:03 - INFO - <- This level is successfully initialized
05/045/2012 13:45:03 - INFO - Flashtool Version 0.6.6 built on 2012-01-08 19:34:23
05/045/2012 13:45:11 - INFO - Device disconnected
05/045/2012 13:45:14 - INFO - Selected X10_V1_BLRelock.ftf
05/045/2012 13:45:14 - INFO - Preparing files for flashing
05/045/2012 13:45:14 - INFO - Please connect your device into flashmode.
05/046/2012 13:46:23 - INFO - Device connected with USB debugging on
05/046/2012 13:46:27 - INFO - Connected device : ST18
05/046/2012 13:46:27 - INFO - Installed version of busybox : N/A
05/046/2012 13:46:27 - INFO - Android version : 2.3.4 / kernel version : 2.6.32.9-perf
After that, no further actions, and no flash done. I dont know what else i can do. Help, please. I also tried using different usb ports, with no result.
Thanks in advance.
Problem solved.
Thanks.
dude i'm facing the same issue.. what did you do to resolve it????
katuss said:
dude i'm facing the same issue.. what did you do to resolve it????
Click to expand...
Click to collapse
well, you have to put your phone in download mode don't start flashing with phone off/on
look here on your phone should be the same procedure just search before to post
I have bricked my X8, its stuck on SE logo, I have tried diff methods from one of the post to get it unbrick, but the phone doesn't respond in fact i have to pull out the battery to switch off the phone. I have even tried to flash the phone via flash tool. but it gives me an error as below.
18/051/2012 19:51:56 - INFO - <- This level is successfully initialized
18/051/2012 19:51:56 - INFO - Flashtool Version 0.6.8.0 built on 2012-02-26 19:26:25
18/051/2012 19:51:56 - INFO - You can drag and drop ftf files here to start flashing them
18/052/2012 19:52:02 - INFO - Device disconnected
18/052/2012 19:52:06 - INFO - Selected X8i_2.1.1.A.0.6_Baseband_015.ftf
18/052/2012 19:52:06 - INFO - Preparing files for flashing
18/052/2012 19:52:06 - INFO - Please connect your device into flashmode.
18/052/2012 19:52:43 - INFO - Device connected in flash mode
18/052/2012 19:52:43 - INFO - Opening device for R/W
18/052/2012 19:52:43 - INFO - Start Flashing
18/052/2012 19:52:43 - ERROR -
18/052/2012 19:52:43 - ERROR - Error flashing. Aborted
18/052/2012 19:52:44 - INFO - Device connected in flash mode
18/053/2012 19:53:04 - INFO - Device disconnected
18/053/2012 19:53:07 - INFO - Device connected in flash mode
18/054/2012 19:54:19 - INFO - Device connected with USB debugging off
18/054/2012 19:54:19 - INFO - For 2011 devices line, be sure you are not in MTP mode
18/054/2012 19:54:33 - INFO - Device disconnected
18/054/2012 19:54:45 - INFO - Device connected with USB debugging off
18/054/2012 19:54:45 - INFO - For 2011 devices line, be sure you are not in MTP mode
18/054/2012 19:54:52 - INFO - Device disconnected
18/055/2012 19:55:08 - INFO - Device connected with USB debugging off
18/055/2012 19:55:08 - INFO - For 2011 devices line, be sure you are not in MTP mode
18/056/2012 19:56:53 - INFO - Device disconnected
18/057/2012 19:57:01 - INFO - Selected X8i_2.1.1.A.0.6_Baseband_015.ftf
18/057/2012 19:57:01 - INFO - Preparing files for flashing
18/057/2012 19:57:01 - INFO - Please connect your device into flashmode.
18/057/2012 19:57:07 - INFO - Device connected with USB debugging off
18/057/2012 19:57:07 - INFO - For 2011 devices line, be sure you are not in MTP mode
18/057/2012 19:57:31 - INFO - Device disconnected
18/057/2012 19:57:32 - INFO - Device connected with USB debugging off
18/057/2012 19:57:32 - INFO - For 2011 devices line, be sure you are not in MTP mode
18/058/2012 19:58:01 - INFO - Device disconnected
18/058/2012 19:58:01 - INFO - Device connected with USB debugging off
18/058/2012 19:58:01 - INFO - For 2011 devices line, be sure you are not in MTP mode
since i cannot access anything i dont know how to change MTP mode to MSC mode. Pls help
Same problem here. Please help! Thanks!!
jk1000 said:
I have bricked my X8, its stuck on SE logo, I have tried diff methods from one of the post to get it unbrick, but the phone doesn't respond in fact i have to pull out the battery to switch off the phone. I have even tried to flash the phone via flash tool. but it gives me an error as below.
18/051/2012 19:51:56 - INFO - <- This level is successfully initialized
18/051/2012 19:51:56 - INFO - Flashtool Version 0.6.8.0 built on 2012-02-26 19:26:25
18/051/2012 19:51:56 - INFO - You can drag and drop ftf files here to start flashing them
18/052/2012 19:52:02 - INFO - Device disconnected
18/052/2012 19:52:06 - INFO - Selected X8i_2.1.1.A.0.6_Baseband_015.ftf
18/052/2012 19:52:06 - INFO - Preparing files for flashing
18/052/2012 19:52:06 - INFO - Please connect your device into flashmode.
18/052/2012 19:52:43 - INFO - Device connected in flash mode
18/052/2012 19:52:43 - INFO - Opening device for R/W
18/052/2012 19:52:43 - INFO - Start Flashing
18/052/2012 19:52:43 - ERROR -
18/052/2012 19:52:43 - ERROR - Error flashing. Aborted
18/052/2012 19:52:44 - INFO - Device connected in flash mode
18/053/2012 19:53:04 - INFO - Device disconnected
18/053/2012 19:53:07 - INFO - Device connected in flash mode
18/054/2012 19:54:19 - INFO - Device connected with USB debugging off
18/054/2012 19:54:19 - INFO - For 2011 devices line, be sure you are not in MTP mode
18/054/2012 19:54:33 - INFO - Device disconnected
18/054/2012 19:54:45 - INFO - Device connected with USB debugging off
18/054/2012 19:54:45 - INFO - For 2011 devices line, be sure you are not in MTP mode
18/054/2012 19:54:52 - INFO - Device disconnected
18/055/2012 19:55:08 - INFO - Device connected with USB debugging off
18/055/2012 19:55:08 - INFO - For 2011 devices line, be sure you are not in MTP mode
18/056/2012 19:56:53 - INFO - Device disconnected
18/057/2012 19:57:01 - INFO - Selected X8i_2.1.1.A.0.6_Baseband_015.ftf
18/057/2012 19:57:01 - INFO - Preparing files for flashing
18/057/2012 19:57:01 - INFO - Please connect your device into flashmode.
18/057/2012 19:57:07 - INFO - Device connected with USB debugging off
18/057/2012 19:57:07 - INFO - For 2011 devices line, be sure you are not in MTP mode
18/057/2012 19:57:31 - INFO - Device disconnected
18/057/2012 19:57:32 - INFO - Device connected with USB debugging off
18/057/2012 19:57:32 - INFO - For 2011 devices line, be sure you are not in MTP mode
18/058/2012 19:58:01 - INFO - Device disconnected
18/058/2012 19:58:01 - INFO - Device connected with USB debugging off
18/058/2012 19:58:01 - INFO - For 2011 devices line, be sure you are not in MTP mode
since i cannot access anything i dont know how to change MTP mode to MSC mode. Pls help
Click to expand...
Click to collapse
try using SEU..or PC companion.
Hi guys. I have a problem with my phone. I have the xperia tipo dual and i'm trying to root flash tool. My problem is that the software that I have inside is the 11.0.a.6.5. Trying to pass the 11.0.A.0.16. Everything goes right until it says ''press the back button and hold it''. Not doing anything there. Any ideas?
here is the log
13/033/2013 13:33:29 - INFO - <- This level is successfully initialized
13/033/2013 13:33:29 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
13/033/2013 13:33:29 - INFO - You can drag and drop ftf files here to start flashing them
13/033/2013 13:33:34 - INFO - Device disconnected
13/033/2013 13:33:39 - INFO - Device connected with USB debugging off
13/033/2013 13:33:39 - INFO - For 2011 devices line, be sure you are not in MTP mode
13/033/2013 13:33:40 - INFO - Device connected with USB debugging on
13/033/2013 13:33:41 - INFO - Connected device : ST21
13/033/2013 13:33:41 - INFO - Installed version of busybox : N/A
13/033/2013 13:33:41 - INFO - Android version : 4.0.4 / kernel version : 3.0.8-perf / Build number : 11.0.A.6.5
13/033/2013 13:33:48 - INFO - Selected X10_V1_BLRelock.ftf
13/033/2013 13:33:48 - INFO - Preparing files for flashing
13/033/2013 13:33:48 - INFO - Please connect your device into flashmode.
13/033/2013 13:33:52 - INFO - Flash canceled
13/034/2013 13:34:02 - INFO - Selected ST21i_11.0.A.0.16_Non.ftf
13/034/2013 13:34:02 - INFO - Preparing files for flashing
13/034/2013 13:34:08 - INFO - Please connect your device into flashmode.
13/034/2013 13:34:19 - INFO - Device disconnected
13/035/2013 13:35:26 - INFO - Device connected with USB debugging off
13/035/2013 13:35:26 - INFO - For 2011 devices line, be sure you are not in MTP mode
Sorry for my bad english
nobody?
I think (can't confirm) its because of pressing the wrong button. The back button is for x10 Google,which button it is for you.
If not possible try doomlords rooting toolkit.(Google and find it)
Sent from my Xperia Mini Pro
Hello, first of all sorry for my english.
Yesterday I flashed my Xperia J with FXP223, everything was ok except that I have no network, and my IMEI was gone.
I've found that I have to flash my phone with an ICS stock rom and reflash with FXP223.
But i can't flash my phone in flash mode.
I followed all instructions, Flashtool -> flash mode -> select .ftf rom -> plug my phone in flash mode when asked, green led is OK -> and then the flash freeze at "Flashing data" and at the same time my green led shutdown.
Code:
16/012/2013 09:12:36 - INFO - <- This level is successfully initialized
16/012/2013 09:12:36 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
16/012/2013 09:12:40 - INFO - Device disconnected
16/012/2013 09:12:42 - INFO - Selected ST26i / 11.0.A.7.5 / CE
16/012/2013 09:12:42 - INFO - Preparing files for flashing
16/012/2013 09:12:51 - INFO - Please connect your device into flashmode.
16/013/2013 09:13:02 - INFO - Device connected in flash mode
16/013/2013 09:13:05 - INFO - Opening device for R/W
16/013/2013 09:13:05 - INFO - Reading device information
16/013/2013 09:13:06 - INFO - Phone ready for flashmode operations.
16/013/2013 09:13:06 - INFO - Current device : Unknown: Nov 12 2012/22:55:05 - YT9002JQBJ - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05
16/013/2013 09:13:06 - INFO - Start Flashing
16/013/2013 09:13:06 - INFO - Processing loader
16/013/2013 09:13:06 - INFO - Checking header
16/013/2013 09:13:06 - INFO - Flashing data
I have tested with multiple .ftf rom, 2 versions of Flashtool, on 3 PC, usb debugging is checked, and all the time it freeze at "Flashing data" and my green led shutdown.
I hope that someone can help me, I can't use my phone :'(
Thank you in advance.
Edit: Fastboot mode works fine, only flashmode doesn't works.
NoGynGz said:
Hello, first of all sorry for my english.
Yesterday I flashed my Xperia J with FXP223, everything was ok except that I have no network, and my IMEI was gone.
I've found that I have to flash my phone with an ICS stock rom and reflash with FXP223.
But i can't flash my phone in flash mode.
I followed all instructions, Flashtool -> flash mode -> select .ftf rom -> plug my phone in flash mode when asked, green led is OK -> and then the flash freeze at "Flashing data" and at the same time my green led shutdown.
Code:
16/012/2013 09:12:36 - INFO - <- This level is successfully initialized
16/012/2013 09:12:36 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
16/012/2013 09:12:40 - INFO - Device disconnected
16/012/2013 09:12:42 - INFO - Selected ST26i / 11.0.A.7.5 / CE
16/012/2013 09:12:42 - INFO - Preparing files for flashing
16/012/2013 09:12:51 - INFO - Please connect your device into flashmode.
16/013/2013 09:13:02 - INFO - Device connected in flash mode
16/013/2013 09:13:05 - INFO - Opening device for R/W
16/013/2013 09:13:05 - INFO - Reading device information
16/013/2013 09:13:06 - INFO - Phone ready for flashmode operations.
16/013/2013 09:13:06 - INFO - Current device : Unknown: Nov 12 2012/22:55:05 - YT9002JQBJ - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05
16/013/2013 09:13:06 - INFO - Start Flashing
16/013/2013 09:13:06 - INFO - Processing loader
16/013/2013 09:13:06 - INFO - Checking header
16/013/2013 09:13:06 - INFO - Flashing data
I have tested with multiple .ftf rom, 2 versions of Flashtool, on 3 PC, usb debugging is checked, and all the time it freeze at "Flashing data" and my green led shutdown.
I hope that someone can help me, I can't use my phone :'(
Thank you in advance.
Edit: Fastboot mode works fine, only flashmode doesn't works.
Click to expand...
Click to collapse
Did you install the drivers from the flashtool folder? If not that may very well be your problem.
gamer649 said:
Did you install the drivers from the flashtool folder? If not that may very well be your problem.
Click to expand...
Click to collapse
Flashtool-drivers.exe doesn't have drivers for Xperia J, I've tested to manually import J drivers with that method : http://forum.xda-developers.com/showpost.php?p=41592930&postcount=15 but doesn't work too.
Sony companion recognize my phone (when I test to recover my phone it says that my phone has been modified, but it recognize the phone)
I don't know what to do
NoGynGz said:
Flashtool-drivers.exe doesn't have drivers for Xperia J, I've tested to manually import J drivers with that method : http://forum.xda-developers.com/showpost.php?p=41592930&postcount=15 but doesn't work too.
Sony companion recognize my phone (when I test to recover my phone it says that my phone has been modified, but it recognize the phone)
I don't know what to do
Click to expand...
Click to collapse
Did you install the fastboot and flashmode drives from the setup as you may need them too. I think it would be worth it to install all of the drivers from the driver setup folder. If you try that and then that method after I think it should work.
OMFG
After hours and hours of research and test, it finally works !!! (on the 4th PC )
Certainly drivers conflict or something like that.
If someone have the same problem :
Install only Flashtool v0.9.10.1
Install flashmode drivers with Flashtool-drivers.exe
Launch it.
Import ST26 drivers in flashtool (search ST26.zip on google)
Connect the Xperia J in flashmode to automatically install the windows drivers.
When complete disconnect the Xperia J.
In Flashtool -> flashmode -> select a stock .ftf rom -> flash -> connect the xperia in flashmode when asked. Yeah it flash.
I insist that on this PC, I have never installed SEUS, PC companion or others software or drivers.
(For those who want, I flashed with an ICS stock rom then FXP218, now all works)
Thank you gamer649 for trying to help me
NoGynGz said:
OMFG
After hours and hours of research and test, it finally works !!! (on the 4th PC )
Certainly drivers conflict or something like that.
If someone have the same problem :
Install only Flashtool v0.9.10.1
Install flashmode drivers with Flashtool-drivers.exe
Launch it.
Import ST26 drivers in flashtool (search ST26.zip on google)
Connect the Xperia J in flashmode to automatically install the windows drivers.
When complete disconnect the Xperia J.
In Flashtool -> flashmode -> select a stock .ftf rom -> flash -> connect the xperia in flashmode when asked. Yeah it flash.
I insist that on this PC, I have never installed SEUS, PC companion or others software or drivers.
(For those who want, I flashed with an ICS stock rom then FXP218, now all works)
Click to expand...
Click to collapse
It is good to hear you got it working. I've just noticed you previously said you tried to repair your phone in PC companion. That would have stopped it working too. I'm sorry I didn't pick that up sooner.
tried all of that but no luck when i press on the thunder icon it says wait for flash
NoGynGz said:
OMFG
After hours and hours of research and test, it finally works !!! (on the 4th PC )
Certainly drivers conflict or something like that.
If someone have the same problem :
Install only Flashtool v0.9.10.1
Install flashmode drivers with Flashtool-drivers.exe
Launch it.
Import ST26 drivers in flashtool (search ST26.zip on google)
Connect the Xperia J in flashmode to automatically install the windows drivers.
When complete disconnect the Xperia J.
In Flashtool -> flashmode -> select a stock .ftf rom -> flash -> connect the xperia in flashmode when asked. Yeah it flash.
I insist that on this PC, I have never installed SEUS, PC companion or others software or drivers.
(For those who want, I flashed with an ICS stock rom then FXP218, now all works)
Thank you gamer649 for trying to help me
Click to expand...
Click to collapse
tried all of that but no luck when i press on the thunder icon it says wait for flashmode but nothing happens
Boro2 said:
tried all of that but no luck when i press on the thunder icon it says wait for flashmode but nothing happens
Click to expand...
Click to collapse
try another boot.img first in fastboot mode and then try.
Thanks
tuspam said:
try another boot.img first in fastboot mode and then try.
Click to expand...
Click to collapse
Thanks bro it worked
No Luck
I have tried every thing in this thread but nothing works for me.
Plz Help I am on stock firmware .33.
Does not goes any further from this.
Please Help.
04/010/2014 12:10:38 - INFO - Selected ST26i / 11.2.A.0.21 / No brand ITA
04/010/2014 12:10:39 - INFO - Preparing files for flashing
04/011/2014 12:11:36 - INFO - Please connect your device into flashmode.
04/011/2014 12:11:44 - INFO - Device connected in flash mode
04/011/2014 12:11:45 - INFO - Opening device for R/W
04/011/2014 12:11:45 - INFO - Reading device information
04/011/2014 12:11:45 - INFO - Phone ready for flashmode operations.
04/011/2014 12:11:45 - INFO - Current device : ST26i - YT9102JUSP - 1271-1970_R5E - 1263-8752_11.2.A.0.33 - WORLD-i_11.2.A.0.33
04/011/2014 12:11:45 - INFO - Start Flashing
04/011/2014 12:11:45 - INFO - Processing loader.sin
04/011/2014 12:11:45 - INFO - Checking header
04/011/2014 12:11:46 - INFO - Flashing data
ALL DONE BY REMOVING MMC AND FLASHING
please help
I also had the same problem but then i managed to flash a stock ics .ftf and now the device is not responding...! NO ligths even after charging my phone is still connected to charger...! someone please help please ...!
anaseansari said:
I have tried every thing in this thread but nothing works for me.
Plz Help I am on stock firmware .33.
Does not goes any further from this.
Please Help.
04/010/2014 12:10:38 - INFO - Selected ST26i / 11.2.A.0.21 / No brand ITA
04/010/2014 12:10:39 - INFO - Preparing files for flashing
04/011/2014 12:11:36 - INFO - Please connect your device into flashmode.
04/011/2014 12:11:44 - INFO - Device connected in flash mode
04/011/2014 12:11:45 - INFO - Opening device for R/W
04/011/2014 12:11:45 - INFO - Reading device information
04/011/2014 12:11:45 - INFO - Phone ready for flashmode operations.
04/011/2014 12:11:45 - INFO - Current device : ST26i - YT9102JUSP - 1271-1970_R5E - 1263-8752_11.2.A.0.33 - WORLD-i_11.2.A.0.33
04/011/2014 12:11:45 - INFO - Start Flashing
04/011/2014 12:11:45 - INFO - Processing loader.sin
04/011/2014 12:11:45 - INFO - Checking header
04/011/2014 12:11:46 - INFO - Flashing data
ALL DONE BY REMOVING MMC AND FLASHING
Click to expand...
Click to collapse
Remove SIM Card, MMC & then flash! Also, note that sometimes flashing doesn't work after you resume from Standby/Hibernate mode in PC.
anaseansari said:
I have tried every thing in this thread but nothing works for me.
Plz Help I am on stock firmware .33.
Does not goes any further from this.
Please Help.
04/010/2014 12:10:38 - INFO - Selected ST26i / 11.2.A.0.21 / No brand ITA
04/010/2014 12:10:39 - INFO - Preparing files for flashing
04/011/2014 12:11:36 - INFO - Please connect your device into flashmode.
04/011/2014 12:11:44 - INFO - Device connected in flash mode
04/011/2014 12:11:45 - INFO - Opening device for R/W
04/011/2014 12:11:45 - INFO - Reading device information
04/011/2014 12:11:45 - INFO - Phone ready for flashmode operations.
04/011/2014 12:11:45 - INFO - Current device : ST26i - YT9102JUSP - 1271-1970_R5E - 1263-8752_11.2.A.0.33 - WORLD-i_11.2.A.0.33
04/011/2014 12:11:45 - INFO - Start Flashing
04/011/2014 12:11:45 - INFO - Processing loader.sin
04/011/2014 12:11:45 - INFO - Checking header
04/011/2014 12:11:46 - INFO - Flashing data
ALL DONE BY REMOVING MMC AND FLASHING
Click to expand...
Click to collapse
restore your backup files then flash again ,it's work fine
I'm trying to downgrade my xz from 8.0 to 7.1.1
The flash tool I 'm using is 0.9.24.4 and 0.9.28.0. I had already unlock the bootloader pf my xperia xz, all the drivers had be setup.
When I try to connect my phone to my PC it always shows the following situation :
14/034/2020 14:34:47 - INFO - Starting phone detection
14/034/2020 14:34:50 - INFO - Device connected in flash mode
14/036/2020 14:36:01 - INFO - Selected Bundle for Sony Xperia XZ(F8331). FW release : 39.0.A.3.30_R6B. Customization : Central Europe 1 Generic_1304-9023
14/036/2020 14:36:01 - INFO - Preparing files for flashing
14/036/2020 14:36:11 - INFO - Device disconnected
14/037/2020 14:37:21 - INFO - Please connect your device into flashmode.
14/037/2020 14:37:36 - INFO - Using Gordon gate drivers version 3.1.0.0
14/037/2020 14:37:36 - INFO - Opening device for R/W
14/037/2020 14:37:40 - INFO - Device disconnected
14/037/2020 14:37:41 - INFO - Device connected in flash mode
I had check that there is no problem with my cable. So I had tried the other version. On 0.9.23.0.
Everything is the same, but in 0.9.23.0 it shows the following:
18:26:16 - INFO - Start Flashing
18:26:16 - INFO - No loader in the bundle. Searching for one
18:26:16 - INFO - No matching loader found
18:26:16 - WARN - No loader found or set manually. Skipping loader
I had also tried 0.9.18.6, and I think it's too old and doesn't work for XZ.
Can anyone help me!! PLEASE!!!
redownload system image and reinstall drivers
Are you using win8.1? In that release, the driver always gives errors I switched to Windows 10, and i've improved this error