I've bougth a thunderbird i5s mt 6572 from :http://www.fastcardtech.com/Thunderbird-Golden-i5s-6572.html, and I've tried to flash this rom http://www.needrom.com/mobile/thunderbird-i5s-golden-mtk6572/,now my phone doesn't boot and the screen is always black,and when i try to flash all the roms with sp flash tools it give me every time this error:
BROM ERROR:S_FT_ENABLE_DRAM_FAIL(4032)
[EMI] Enable DRAM Failed.
Please check your load matches to your target which is to be downloaded.
what can i do? my pc recognise it
help me please
up
thunderbird
ilahomesick said:
up
Click to expand...
Click to collapse
Same problem. Did you fix it?
rumo74 said:
Same problem. Did you fix it?
Click to expand...
Click to collapse
Same problem.
Any Help?
Always get DRAM_FAIL(4032)
test point is the way?
Hi please help me I'm getting brom error 5069 everytime i try to flash my mt6892 with SP Tools..thanks
XDA Visitor said:
Hi please help me I'm getting brom error 5069 everytime i try to flash my mt6892 with SP Tools..thanks
Click to expand...
Click to collapse
Hello, and welcome to XDA!
mt6892 is the chipset number, and can be used by several devices. Can I get your device's make and model?
Many thanks!
I have a Micromax A110 that uses :
H/W Ver.: V1.0
S/W Ver.: V1.11
Its been a long time that my phone is bricked, actually I got an error "Encryption unsuccessful" after that I booted up the phone in Factory Mode and Wiped all the data.
Just after that, I tried flashing a stock rom using SP Flash Tool (Latest one) & Old one too, now every time I click on download, it encounters an error "brom error : S_DL_PMT_ERR_NO_SPACE (5069)". I have also tried Firmware->Upgrade option but that does not work either.
The phone is detectable in Device Manager, I have also tried installing drivers again n' again but nothing seems like working.
Also I have found out from memory test in SP Flash Tool that NAND Flash is not detected. I don't know whether it has something to do with Flashing or not.
Please help me out to solve this, I'd be very grateful of any helpful reply given in here.
Thanks.
Ali147852 said:
I have a Micromax A110 that uses :
H/W Ver.: V1.0
S/W Ver.: V1.11
Its been a long time that my phone is bricked, actually I got an error "Encryption unsuccessful" after that I booted up the phone in Factory Mode and Wiped all the data.
Just after that, I tried flashing a stock rom using SP Flash Tool (Latest one) & Old one too, now every time I click on download, it encounters an error "brom error : S_DL_PMT_ERR_NO_SPACE (5069)". I have also tried Firmware->Upgrade option but that does not work either.
The phone is detectable in Device Manager, I have also tried installing drivers again n' again but nothing seems like working.
Also I have found out from memory test in SP Flash Tool that NAND Flash is not detected. I don't know whether it has something to do with Flashing or not.
Please help me out to solve this, I'd be very grateful of any helpful reply given in here.
Thanks.
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. Please ask your questions in your device's Q&A forum here:
A110 Q&A, Help and Troubleshooting
Good luck!
Please Help Me!
I flashed my device with wrong TWRP on Infinix Note 7, after that I tried to flash the original firmware of the mobile from SP FLASH TOOL, I always encounter the problem "BROM ERROR : STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001)", I've tried by pressing the top volume and power button, the down volume button, both buttons and power, only power. But still always get the problem "BROM ERROR: STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001)"
Maybe someone can help me with my problem, Because I'm a beginner in this.
Thanks!
Tech.
Solution: Found the solution after 6 months, and created a thread. Solution is explained there in detail: Infinix Bootloop Fix
Look inside here:
List of sp flash tool error codes, meanings & how to fix (solution)
Smart Phone Flash Tool also known as SP Flash Tool is a Desktop application used to flash firmware to Mediatek (MTK) Android devices. Its a pretty easy tool to use but you're bound to encounter one er
forum.hovatek.com
TechySkills said:
Please Help Me!
I flashed my device with wrong TWRP on Infinix Note 7, after that I tried to flash the original firmware of the mobile from SP FLASH TOOL, I always encounter the problem "BROM ERROR : STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001)", I've tried by pressing the top volume and power button, the down volume button, both buttons and power, only power. But still always get the problem "BROM ERROR: STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001)"
Maybe someone can help me with my problem, Because I'm a beginner in this.
Thanks!
Tech.
Click to expand...
Click to collapse
Look for bypass utility and its instructions. It will help beat this error
Hi
Please help me my Techno Pop 5 LTE smartphone stuck at this logo, (picture attached), I 've tried all methods but even unable to Hard Reset through recovery menu (failed to start through buttons POWER+VOL UP), I 've tried a lot, if there is any other method kindly let me know.
f_magsi said:
Hi
Please help me my Techno Pop 5 LTE smartphone stuck at this logo, (picture attached), I 've tried all methods but even unable to Hard Reset through recovery menu (failed to start through buttons POWER+VOL UP), I 've tried a lot, if there is any other method kindly let me know.
Click to expand...
Click to collapse
If it is a software issue you may need to flash the phone fimrware. Please watch this video here and if you need help with files required, feel free to reply back.
Flash File
Download it from here
SP Flash Tool Modfied
Credits:
GSM Phone Repair
thanks brother, it worked.
f_magsi said:
thanks brother, it worked.
Click to expand...
Click to collapse
I'm glad to see your device is working again. Please post the screenshot here.
mvikrant97 said:
If it is a software issue you may need to flash the phone fimrware. Please watch this video here and if you need help with files required, feel free to reply back.
Flash File
Download it from here
SP Flash Tool Modfied
Credits:
GSM Phone Repair
Click to expand...
Click to collapse
I was trying to hard reset the phone, and recovery menu appeared previously it was not working, any way set restored successfully and every thing was working fine, but then i restarted the mobile to make sure, it was ok, but same problem happened again, stuck at logo, now again i am failed to find the recovery menu, by pressing Vol_Up + Power_Butn, and cannot turn off/switch off the mobile, it is a loop and auto restart, when i try to turn it off, now i want to flash the new software, please guide me.
f_magsi said:
I was trying to hard reset the phone, and recovery menu appeared previously it was not working, any way set restored successfully and every thing was working fine, but then i restarted the mobile to make sure, it was ok, but same problem happened again, stuck at logo, now again i am failed to find the recovery menu, by pressing Vol_Up + Power_Butn, and cannot turn off/switch off the mobile, it is a loop and auto restart, when i try to turn it off, now i want to flash the new software, please guide me.
Click to expand...
Click to collapse
Download this firmware if it BD4
Tecno POP BD4 Firmware
Does your phone have SPD/Uniscon chipset?
mvikrant97 said:
Download this firmware if it BD4
Tecno POP BD4 Firmware
Does your phone have SPD/Uniscon chipset?
Click to expand...
Click to collapse
hello i have almost same issue with tecno pop 5 LTE i try to restore the NVRAM now i try to reflash and and the phone its stuck at fastboot mode how can i fix this ... i try to download the file you posted so i can rewrite again i try sometimes with sp flash and i can write with that the only way i can flash is with chimera tools thats the weird part i need some help
w1n73rf3ll said:
hello i have almost same issue with tecno pop 5 LTE i try to restore the NVRAM now i try to reflash and and the phone its stuck at fastboot mode how can i fix this ... i try to download the file you posted so i can rewrite again i try sometimes with sp flash and i can write with that the only way i can flash is with chimera tools thats the weird part i need some help
Click to expand...
Click to collapse
I don't have Chimera tool to test.
Why do you need the chimera tool?
its a phone repair program ... i tried with others tools and no luck