[ROM][Tate][CM13][6.0.x] Temasek's UNOFFICIAL Builds - 7" Kindle Fire HD Android Development

[ROM][Tate][CM13][6.0.x] Temasek's UNOFFICIAL Builds - 7" Kindle Fire HD Android Development

I've noticed that there is no Camera app icon after flashing ROM. DID SOMEONE TRY TO OPEN ZIP FILE AND REPLACE CAMERA.APK (from CM 12.1, for example)?

alexander_32 said:
I've noticed that there is no Camera app icon after flashing ROM. DID SOMEONE TRY TO OPEN ZIP FILE AND REPLACE CAMERA.APK (from CM 12.1, for example)?
Click to expand...
Click to collapse
I suppose one could do that, but with the state of the devices in CM13 being as they are right now, I doubt it'd be the least of your worries. I'm running an old RR build on the 8.9" counterpart (jem), and while the camera itself works, the camera app embedded in the ROM doesn't. Even if you managed to sideload or otherwise integrate the camera app from a cm12.1 build, it'd be of no use because the camera binaries in the ROM aren't working (likely because of the 3.0.101 kernel bump).
Sent from my Amazon Jem using XDA Labs

monster1612 said:
I suppose one could do that, but with the state of the devices in CM13 being as they are right now, I doubt it'd be the least of your worries. I'm running an old RR build on the 8.9" counterpart (jem), and while the camera itself works, the camera app embedded in the ROM doesn't. Even if you managed to sideload or otherwise integrate the camera app from a cm12.1 build, it'd be of no use because the camera binaries in the ROM aren't working (likely because of the 3.0.101 kernel bump).
Sent from my Amazon Jem using XDA Labs
Click to expand...
Click to collapse
By the way, there were RR tate builds with working camera, so I definitely will try that later. Ok, I'll try to bring 1-2 ROMs based on AOSP and then bring a pure AOSP (because it's not so easy to adapt those branches to pure AOSP as I thought before). Then I'll actually test all these MM options and hopefully, will find some easy solutions.

Downloading this now. I'll give it a clean flash and check it out!

vasolini said:
Downloading this now. I'll give it a clean flash and check it out!
Click to expand...
Click to collapse
If you don't mind, try to delete Camera2 folder in system/app then flash it and install app like open camera (or google camera) and then let me know if this trick works
By the way, I didn't try to just install open camera alongside camera2 so, please do it either.

alexander_32 said:
If you don't mind, try to delete Camera2 folder in system/app then flash it and install app like open camera (or google camera) and then let me know if this trick works
By the way, I didn't try to just install open camera alongside camera2 so, please do it either.
Click to expand...
Click to collapse
I already had it flashed and set up by the time I saw this message, but maybe this weekend, I can delete it and re-flash to see what happens. I can tell you that so far it is very smooth and responsive. I used it last night at my meeting, and the only thing I noticed was that the screen flickered once in awhile. Other than that, it ran great! I never use the camera on the Kindle, so that wasn't an issue for me. If I can get time this weekend, I will try what you asked. :good:

vasolini said:
I already had it flashed and set up by the time I saw this message, but maybe this weekend, I can delete it and re-flash to see what happens. I can tell you that so far it is very smooth and responsive. I used it last night at my meeting, and the only thing I noticed was that the screen flickered once in awhile. Other than that, it ran great! I never use the camera on the Kindle, so that wasn't an issue for me. If I can get time this weekend, I will try what you asked. :good:
Click to expand...
Click to collapse
I'm glad for you. As for Camera, I've checked my suggestions already with no success.
I guess the problem is with vendor folder. There no Camera2.apk in CM13 builds. CM13 use Snap Camera now.

Also check OFFICIAL [ROM][EXPERIMENTAL][6.0.1 r43][tate] Bliss Rom 6.4 by Team Bliss !

alexander_32 said:
Also check OFFICIAL [ROM][EXPERIMENTAL][6.0.1 r43][tate] Bliss Rom 6.4 by Team Bliss !
Click to expand...
Click to collapse
Sweet! I've been waiting for that one! Thank you!

alexander_32 said:
If you don't mind, try to delete Camera2 folder in system/app then flash it and install app like open camera (or google camera) and then let me know if this trick works
By the way, I didn't try to just install open camera alongside camera2 so, please do it either.
Click to expand...
Click to collapse
I deleted the Camera2 folder and flashed. Then installed the Google camera. It crashed on opening. So still no camera. But the ROM is great otherwise!

vasolini said:
I deleted the Camera2 folder and flashed. Then installed the Google camera. It crashed on opening. So still no camera. But the ROM is great otherwise!
Click to expand...
Click to collapse
Last AICP build can run Google Camera, Open Camera or whatever. If only it was possible to make a camera flashable zip from AICP. I used Meld to see differences between AICP build and last CM13 builds, but I don't see obvious differences with camera files, maybe someone more experienced could do that.
I have a shortlist of CM13 ROMs, by the way, if someone wants to help and have an opportunity to compile CM13 based ROMs go ahead and PM me. I'm focused on building AOSP trees from scratch now, we'll see what happens.

Just wanted to update that I'm still running this rom, and without doing any kernel tweaks, it runs pretty snappy! I may look at doing the low memory killer, but it doesn't really need it. I may stick with this one for some time because it runs so smooth.

vasolini said:
Just wanted to update that I'm still running this rom, and without doing any kernel tweaks, it runs pretty snappy! I may look at doing the low memory killer, but it doesn't really need it. I may stick with this one for some time because it runs so smooth.
Click to expand...
Click to collapse
I'll definitely bring an update in the future, it's tough for me to compile these things regularly (I have 2 core processor with 4gb of RAM and ccache doesn't work for some reason). I'm working on AOSP for tate at the moment, then, hopefully, will find solutions for CM13 source. So, please, wait. Thanks for understanding.

alexander_32 said:
I'll definitely bring an update in the future, it's tough for me to compile these things regularly (I have 2 core processor with 4gb of RAM and ccache doesn't work for some reason). I'm working on AOSP for tate at the moment, then, hopefully, will find solutions for CM13 source. So, please, wait. Thanks for understanding.
Click to expand...
Click to collapse
I need to learn how to compile and help you out. I think I will start to look into building a machine just for that purpose. I'm not too proficient with Linux, so there would be that learning curve to get around first, unless you can use a Windows PC to compile with. I will do some researching. Thanks for doing the builds in the first place!

vasolini said:
I need to learn how to compile and help you out. I think I will start to look into building a machine just for that purpose. I'm not too proficient with Linux, so there would be that learning curve to get around first, unless you can use a Windows PC to compile with. I will do some researching. Thanks for doing the builds in the first place!
Click to expand...
Click to collapse
I've left you a PM.
As for performance, whatever ROM you use, I strongly recommend you and everyone else, before flashing, open .zip file, open system/app, system/priv-app, and delete useless apks (especially Live Wallpapers).
Please, read this article or any other similar.

Settings
How can I get settings of Trebuchet, want to have only one screen?
Thanks in advance.

Yadegun said:
How can I get settings of Trebuchet, want to have only one screen?
Thanks in advance.
Click to expand...
Click to collapse
I don't use Trebuchet, you need to find this information somewhere else, not in this thread.

alexander_32 said:
I don't use Trebuchet, you need to find this information somewhere else, not in this thread.
Click to expand...
Click to collapse
Me too, I use the default laucher, I though it was Trebuchet, because the only choice in Paramètres, Accueil (Settings, welcome).
So, with that in mind, how to find settings for the launcher?
Thanks.

Yadegun said:
Me too, I use the default laucher, I though it was Trebuchet, because the only choice in Paramètres, Accueil (Settings, welcome).
So, with that in mind, how to find settings for the launcher?
Thanks.
Click to expand...
Click to collapse
At this point, I don't use any CM13 based ROM for tate, so I don't know what launcher do you mean. I recommend you to use Smart Launcher (google it), I use it personally (it is simple and effective). You can install any other launcher, off course.
PLEASE, don't bother me with questions like this! If you found some bugs (besides camera bug) - let me know, if you want to help with MM development for tate - send me a PM. As simple as that.

Related

[ROM+KERNEL] Uber CM-12.1---MOTO E [GCC 4.8 & 4.8]

This is a project that I have been working on for a little while. @shankky pmed me and wanted to take the build for a spin for his device, and we got to talking, and figured I may as well open a thread here for others to try if they want also. This ROM is compiled w/ Uber 4.8 on the ROM side and Uber 4.8 on the kernel side. I have added a few little optimizations here and there. I will add a feature list a little later. Sorry for the crappy OP. If you have any questions, feel free to @ me in the thread. I will answer anything that I can.
Features Added:
Delta Updates
Reboot/reboot recovery QS tile
Sync QS tile
Doze/Ambient display tile
Option for QS tile haptic feedback
Option to show 4 QS tiles per row
Slim's Lockscreen Shortcuts
Slim Custom Doze settings
Call recording for any country
Call recording encoder/format choice
Show each app name during art optimization
Heads Up options
Ability to hide SU status bar icon
Slim Seek Bar
Slim incall proximity speaker
Volume panel timeout
Force expanded notifications
Flip phone to mute/reject call
Option to disable privacy guard notifications
LCD density changer
Built with CM's CameraNext inline instead of Camera2
Updated CameraNext from CM12S
Option to remove data/wifi activity arrows
Downloads:
ROM:
Uber CM-12.1 Download
GAPPS:
5.1 Gapps Download
Some thanks to a few people:
@dankoman for gapps and help all the time lol.
@cristianomatos
@temasek

Also, here is a video review done by @dan96815

Great Build
Using it from an hour. Great build with all the ubercm's features working good

shankky said:
Using it from an hour. Great build with all the ubercm's features working good
Click to expand...
Click to collapse
Screenshots please

Adarsh1998 said:
Screenshots please
Click to expand...
Click to collapse
Check out the review video on 1+1 on op's 1+1 thread.

dhruvmu said:
Check out the review video on 1+1 on op's 1+1 thread.
Click to expand...
Click to collapse
Can't find the video u could post it or pm me?
sent from moto E xt1022 #saketh333

Video now in second post. Although the video is somewhat old. Will you guys please let me know what the performance is like on this dual core procesor? I am used to running on msm8974. I would like to know what it feels like on you guys phone? I don't actually own the device. @shankky tests for me.

@RobbieL811
Nice to see new roms coming up. Thanks.
The ROM seems good like cm12.1(has to be[emoji13] ) with some required modifications that users don't get on cm.
I have just started using it. As of now seems everything good.
Good that you have included camera next. Have an fc while switching to HDR mode. But HDR works when we again open the app. This was the case with camera next even on kitkat. Seems to be specific with moto e. Hope you can fix it.
Logs link - https://docs.google.com/file/d/0B7QODSyAgL0sMmVpVUxXcFdib0E/edit?usp=docslist_api

dhruvmu said:
@RobbieL811
Nice to see new roms coming up. Thanks.
The ROM seems good like cm12.1(has to be[emoji13] ) with some required modifications that users don't get on cm.
I have just started using it. As of now seems everything good.
Good that you have included camera next. Have an fc while switching to HDR mode. But HDR works when we again open the app. This was the case with camera next even on kitkat. Seems to be specific with moto e. Hope you can fix it.
Logs link - https://docs.google.com/file/d/0B7QODSyAgL0sMmVpVUxXcFdib0E/edit?usp=docslist_api
Click to expand...
Click to collapse
I'll take a look at it, but DEFINITELY no promises on this one. CameraNext, was really only designed for the Oneplus One. I just like the UI, and I think it's a cool camera app. Lol.

RobbieL811 said:
Video now in second post. Although the video is somewhat old. Will you guys please let me know what the performance is like on this dual core procesor? I am used to running on msm8974. I would like to know what it feels like on you guys phone? I don't actually own the device. @shankky tests for me.
Click to expand...
Click to collapse
Performance is just awesome, I don't feel any lag, even games run very well, also, I too can test future builds for you if you want it Just let me know.
Great work!

i just installed it, its very fast and smooth, i just wonder what kind of settings this kernel brings? with trickster mod there doesn't seems to be anything fancy other then LED control. no offence.
maybe you can elaborate on the kernels features? no soundcontrol? no custom governor etc? where can i find the Call Recording Setting? i think there is some information missing . Still, so far working smooth and fast, lets see if this will be getting even more awesome

You here @RobbieL811, nice to see great devs over here as well Also, you can use 4.9 Uber on the Moto E Kernel, I tested on my SaberSunset builds and now on my AOSP builds, no error at all using default Kernel though, I haven't looked at AK sources for the E yet. I don't know if I'm gonna bother you posting a test build of 5.1 VexxoAOSP here, it has RIL not working but except that all is going fine (I'm working on a fix for that and watching some repos over here and over there).
ROM (Just to use for a bit or if you don't use your E frequently)
Any gapps 5.1 and most recent SuperSU.
Sources
Any problem I can remove the post or the links as you wish Robbie :good: I'll install your build here as soon as possible.

GalaticStryder said:
You here @RobbieL811, nice to see great devs over here as well Also, you can use 4.9 Uber on the Moto E Kernel, I tested on my SaberSunset builds and now on my AOSP builds, no error at all using default Kernel though, I haven't looked at AK sources for the E yet. I don't know if I'm gonna bother you posting a test build of 5.1 VexxoAOSP here, it has RIL not working but except that all is going fine (I'm working on a fix for that and watching some repos over here and over there).
ROM (Just to use for a bit or if you don't use your E frequently)
Any gapps 5.1 and most recent SuperSU.
Sources
Any problem I can remove the post or the links as you wish Robbie :good: I'll install your build here as soon as possible.
Click to expand...
Click to collapse
Nah. You're good. No need to remove. What kernel source are you using? I'm actually not using AK kernel for the E. That was a typo. I copied over my post header from Bacon and forgot to remove the AK-Kernel part. Just removed it. I am using CM kernel. I already tried to compile w/ 4.9, but no dice, and I didn't feel like fixing up the kernel errors. Lol. I really just need to team up with a good kernel dev for the E and use his kernel like I have done on Bacon. I am compiling this build for like 5 devices now, and I don't really have time to develop each devices kernel lol. Would rather just ship it w/ a kernel that the dev has this device and has done testing and what not.

GalaticStryder said:
You here @RobbieL811, nice to see great devs over here as well Also, you can use 4.9 Uber on the Moto E Kernel, I tested on my SaberSunset builds and now on my AOSP builds, no error at all using default Kernel though, I haven't looked at AK sources for the E yet. I don't know if I'm gonna bother you posting a test build of 5.1 VexxoAOSP here, it has RIL not working but except that all is going fine (I'm working on a fix for that and watching some repos over here and over there).
ROM (Just to use for a bit or if you don't use your E frequently)
Any gapps 5.1 and most recent SuperSU.
Sources
Any problem I can remove the post or the links as you wish Robbie :good: I'll install your build here as soon as possible.
Click to expand...
Click to collapse
Downloading thanks you.

GalaticStryder said:
You here @RobbieL811, nice to see great devs over here as well Also, you can use 4.9 Uber on the Moto E Kernel, I tested on my SaberSunset builds and now on my AOSP builds, no error at all using default Kernel though, I haven't looked at AK sources for the E yet. I don't know if I'm gonna bother you posting a test build of 5.1 VexxoAOSP here, it has RIL not working but except that all is going fine (I'm working on a fix for that and watching some repos over here and over there).
ROM (Just to use for a bit or if you don't use your E frequently)
Any gapps 5.1 and most recent SuperSU.
Sources
Any problem I can remove the post or the links as you wish Robbie :good: I'll install your build here as soon as possible.
Click to expand...
Click to collapse
RIL is working fine on single SIM model, tested in and out calls and SMS without any issues.
Everything is smooth and fluid, performance is awesome, great work!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Edit: Just a curious fact, in this ROM (And some other) incompatible apps like MC5 appears compatible, in stock (for example) isn't compatible, anyone knows what can cause it?

KagamiNator said:
RIL is working fine on single SIM model, tested in and out calls and SMS without any issues.
Everything is smooth and fluid, performance is awesome, great work!
View attachment 3254429
Edit: Just a curious fact, in this ROM (And some other) incompatible apps like MC5 appears compatible, in stock (for example) isn't compatible, anyone knows what can cause it?
View attachment 3254441
Click to expand...
Click to collapse
Are you on my ROM or Galactic?
Sent from my Oneplus One using Tapatalk

RobbieL811 said:
Are you on my ROM or Galactic?
Sent from my Oneplus One using Tapatalk
Click to expand...
Click to collapse
On Galactic's ROM.

I have used this ROM for a while and everything is working and I feel I am gonna stick to this as my daily driver.
Battery life is good. Overnight drain with data and WiFi off was 0%.
If possible can you add two more features
1. Expanded desktop QS
2. Notification ticker

Seems interesting! Thanks op!
One noob ques- now m on cm12.1, what if i twrp backup only data partition, flash this rom , and then restore data partition, will that do?? Coz it takes lot of time to set up all the apps over again...!!
Sent from my Moto E using XDA Free mobile app

ChaTy said:
Seems interesting! Thanks op!
One noob ques- now m on cm12.1, what if i twrp backup only data partition, flash this rom , and then restore data partition, will that do?? Coz it takes lot of time to set up all the apps over again...!!
Sent from my Moto E using XDA Free mobile app
Click to expand...
Click to collapse
I done the same trick to cm12 to cm12.1 U encounter in FCs or Bootloop

[ROM][6.0.1]Slim6 - 1.3[n7100][UNOFFICIAL][09-19]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
First of all, I want to thanks Haxynos TEAM for the help to fix bugs and for the hard work in the sources. Now, Im not a dev so maybe we will get to a point that I cant fix something. I make a big effort and lost a lot of time to make this rom. Slim6 its like a pure AOSP rom right now, they will bring all the options in some time, I use xposed and gravitybox module to get what I want.
SlimROM is a custom android operating system. The main goal is to offer users a slimmed down but still feature rich alternative to other android operating systems.
The entire SlimTeam works together to bring you this tailor-made beauty straight from Android Open Source Project (AOSP) source code.
All of the sources can be publicly viewed through GitHub and Gerrit.
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
WHAT WILL BE INCLUDED:
Android Marshmallow
Slim Center
Slim Launcher
Slim File Manager
Slim Heads Up
The Real Dark Slim User Interface
SlimPIE (inspired by ParanoidAndroid's PIE with a light touch of Slim)
Smart Card Service
Adaptive Backlight
Adaptive Brightness
Smart Lock
Privacy Guard
Sounds Tweaks(Audio FX and Music FX)
Status Bar Tweaks
Battery Saver Mode
Removed Bloatwares
Notification Reminder/Snoozer
Drawer Shortcuts
Lockscreen Shortcuts
Custom Quick Settings Tiles
Improved Performance
Camera - True View
Camera - Smart Capture
and Much More!
WHAT'S WORKING:
Everything...I think...let me know
WHAT'S BROKEN:
Wifi tethering, GPS need an app to fix it for the first time. see post 2
Instructions:
If you need them, this ROM probably isn't for you. However, here they are.
You should disable the sim pin usage before or you will need your puk code everytime after a reboot. (if you are not using PIN code....just follow the instructions)
-> Make sure you have a compatible recovery. TWRP-3.0.0-0
-> Wipe data/Factory reset.
-> Flash ROM, and then GApps.
-> Reboot.
Changelogs
https://slimroms.org/
N7100 changes
-SlimFile manager
-Snap Camera
Known Bugs:
- Most layers themes for frameworks-res will cause systemui fc
DOWNLOADS:
Slim6 - Stable 1.3 (mediafire folder)
SlimGapps (I use the last MINI zip)
Sources:
This ROM is based off Haxynos's sources for our device.
Device
Kernel
Show your support by pressing the Thanks! button
Contributors
cocolopes
Source Code: https://github.com/slimroms
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Haxynos kernel
Based On: AOSP
Version Information
Status: Stable
ScreenShoots:

How to get GPS working
-Download this app GPSFIX
-Press start fix....and wait.....take a lot of time.
-You will get something like this:
-To test it I disconect from all networks (wifi and 3g) activate the gps and use an app to test like this:
App for the test.

Thanks.
Sent from my SM-N910C using Tapatalk

shujanster said:
Thanks.
Sent from my SM-N910C using Tapatalk
Click to expand...
Click to collapse
You are wellcome, ley me know if you ser something wrong
Enviado desde mi GT-N7100 mediante Tapatalk

Nice! Thanks
Slim ROMs stoped the development of this device long ago. I think the last stable build was KitKat back in 2014.

andrewKode said:
Nice! Thanks
Slim ROMs stoped the development of this device long ago. I think the last stable build was KitKat back in 2014.
Click to expand...
Click to collapse
Well this is an alpha so...I cant say that will be stable as kitkat but the battery life is great. I never get this battery life in any cm13 based rom.
:good:

Cocolopes said:
Well this is an alpha so...I cant say that will be stable as kitkat but the battery life is great. I never get this battery life in any cm13 based rom.
View attachment 3759288
:good:
Click to expand...
Click to collapse
Yeah,one of the reasons why I'm not using KitKat is because of the video tearing. I've tried all kind of KitKat ROMs and that problem keeps persisting.
Latest CM 11 builds have that problem too and a lot of FCs.
KitKat TouchWiz doesn't have that problem.

Better battery life. I am sold.
Will try this for sure. Thanks.
---------- Post added at 12:23 ---------- Previous post was at 12:16 ----------
Instructions:
If you need them, this ROM probably isn't for you. However, here they are.
LOL. This was funny. :silly: :laugh:

hey nice rom.I always wanted slim murshmallow rom on my phone. i just installed it and only thing for now I noticed that with just regular use not games not even much apps are installed here its kind of warm on back. i think under the camera.I dont know whats the reason.may be you will be abble to find out and fix it.let me now if I can somehow fix it myself.i now its not possible but anyways

JamesTSK said:
hey nice rom.I always wanted slim murshmallow rom on my phone. i just installed it and only thing for now I noticed that with just regular use not games not even much apps are installed here its kind of warm on back. i think under the camera.I dont know whats the reason.may be you will be abble to find out and fix it.let me now if I can somehow fix it myself.i now its not possible but anyways
Click to expand...
Click to collapse
I dont have that, I test this rom for a week and never have that. Maybe you can try some app to change governors I use No-frills CPU Control and set it in On demand. Can you tell me your instalation metod?
I dont know if any care about this...but this rom its Layers compatible, so you can download layer manager from play store and use the layers to get some custom taste...

some more battery life screenshots

Thanks @Cocolopes :good:
For a long time I wanted to try Slim MM and Layers and guess what..... got both
Will download and test.

silentvisitor said:
Thanks @Cocolopes :good:
For a long time I wanted to try Slim MM and Layers and guess what..... got both
Will download and test.
Click to expand...
Click to collapse
Tell me how it is!
ahaha

silentvisitor said:
Thanks @Cocolopes :good:
For a long time I wanted to try Slim MM and Layers and guess what..... got both
Will download and test.
Click to expand...
Click to collapse
You are wellcome....[emoji4].... Remember that its like aosp...slim team is working to get all the options here. Im using xposed framework and its working perfect. The best battery life I can get in my n7100 is with this rom. When you flash this with TWRP, flash the gapps at the same time....
And please...tell us how you feel with slim6.

silentvisitor said:
Thanks @Cocolopes :good:
For a long time I wanted to try Slim MM and Layers and guess what..... got both
Will download and test.
Click to expand...
Click to collapse
You are wellcome....[emoji4].... Remember that its like aosp...slim team is working to get all the options here. Im using xposed framework and its working perfect. The best battery life I can get in my n7100 is with this rom. When you flash this with TWRP, flash the gapps at the same time....
And please...tell us how you feel with slim6

Link is broken
Can you plz upload it on AndroidFileHost or Basketbuild or Mediafire ?
Thank you ! @Cocolopes

silentvisitor said:
Link is broken
Can you plz upload it on AndroidFileHost or Basketbuild or Mediafire ?
Thank you ! @Cocolopes
Click to expand...
Click to collapse
That mega link from OP is working fine here. Just tried downloading from it and it worked.

roopeshbhardwaj said:
That mega link from OP is working fine here. Just tried downloading from it and it worked.
Click to expand...
Click to collapse
Don't know what's problem on my side then
Post your review plz

silentvisitor said:
Don't know what's problem on my side then
Post your review plz
Click to expand...
Click to collapse
If you are unable to download either from mega.nz or mega.co.nz
Download "ultrasurf" executable file and open it and then you'll be able to browse as well download any blocked site by ISP.
http://ultrasurf.us/
https://www.youtube.com/watch?v=ssJu5h6Gfa4

javvadi said:
If you are unable to download either from mega.nz or mega.co.nz
Download "ultrasurf" executable file and open it and then you'll be able to browse as well download any blocked site by ISP.
http://ultrasurf.us/
Click to expand...
Click to collapse
No PC bro'
Only phone and WiFi.

[ROM][Tate][UNOFFICIAL][Marshmallow 6.0.x] Slim6

Don't be too excited folks. I used CM source for tate to bring this build (AOSP source isn't working yet). Plus, I had to tweak Slim source a little bit. When AOSP source will be done, I'll bring new build which should perform better. Some glitches occur, but the ROM does the job. And of course, if you found some bug, post about it here.

I will give this a try tomorrow! Thanks!

vasolini said:
I will give this a try tomorrow! Thanks!
Click to expand...
Click to collapse
Thank you as well.

There might be some Bluetooth issues.

Droid187 said:
There might be some Bluetooth issues.
Click to expand...
Click to collapse
If you found Bluetooth issues, please, confirm it. If you didn't flash the ROM, confirm it as well. THERE IS NO PLACE FOR "MIGHT BE". Don't forget, that's a test build. AOSP base is needed to make it work 100% properly.

alexander_32 said:
Thank you as well.
Click to expand...
Click to collapse
I'm not sure if it is just me, but I was unable to set up the rom. Everything flashed without an error, but when it got to the setup, all I could see was a small portion of the screen about an inch high x 2" wide right in the center. The text inside the window looked like it was the correct size, but I was unable to move it or enter any information for setup. Do I need to change any settings before flashing?

vasolini said:
I'm not sure if it is just me, but I was unable to set up the rom. Everything flashed without an error, but when it got to the setup, all I could see was a small portion of the screen about an inch high x 2" wide right in the center. The text inside the window looked like it was the correct size, but I was unable to move it or enter any information for setup. Do I need to change any settings before flashing?
Click to expand...
Click to collapse
Try to press on power button then press on power button again. Or tap on this small portion of the screen. I've seen it before. Again, that's a test build, but I'm sure it can do the job even with these little glitches.

alexander_32 said:
Try to press on power button then press on power button again. Or tap on this small portion of the screen. I've seen it before. Again, that's a test build, but I'm sure it can do the job even with these little glitches.
Click to expand...
Click to collapse
The second time's a charm! I have it up and running. Still in setup right now, so I'll try to give some feedback in a day or two. :good:

So far so good! I like how it uses less RAM than others, and it's pretty smooth and responsive. I had to get used to the navigation buttons looking like they were showing that they'd been touched all the time , highlighted I guess would be another way of describing it, but everything's working fine so far. I haven't tested Bluetooth yet. Since I don't use Bluetooth or the camera on my Kindle, that's not a priority. Overall this is a pretty smooth build!! I will be running it for a while. ?

vasolini said:
So far so good! I like how it uses less RAM than others, and it's pretty smooth and responsive. I had to get used to the navigation buttons looking like they were showing that they'd been touched all the time , highlighted I guess would be another way of describing it, but everything's working fine so far. I haven't tested Bluetooth yet. Since I don't use Bluetooth or the camera on my Kindle, that's not a priority. Overall this is a pretty smooth build!! I will be running it for a while. ��
Click to expand...
Click to collapse
Thank you for your feedback. In the future, it will be even better. Bluetooth should work too. It was just a suggestion by some user, who can't even confirm it. Camera works, I've seen it personally. I found the main problem with AOSP building, probably it's easy to solve it, we'll see. And, honestly, I'm surprised it's a pretty smooth build. Perhaps, I didn't wipe internal storage and some odds occurred.

If somebody can help me bring updated version of Slim6 without glitches, please contact me. You just need to download the source, my branches, change a couple of makefiles, nothing extraordinary. My building machine (laptop) is slow, I'm working on bringing other ROMs, so any compiling help deeply appreciates.

IMPORTANT UPDATE
1. Big thanks to @r3t3ch for unloading my laptop
2. The previous build was removed due to there is no point to let it live.
3. New build still has navbar glitches, but now it's definitely less glitchy. (Must be some specific Slim overlay stuff, will be fixed later)
4. 3.0.101+ kernel replaces 3.0.72+ kernel
5. Bootanimation is fixed
https://www.androidfilehost.com/?fid=24728673521238242
Installation: Full wipe/Flash ROM + Open GApps

Alex32,
Tried dirty flashing this over your latest 6.01 beanstalk,
which I have been using for a while and like a lot.
Wiped only caches, reinstalled gapps, android system
kept crashing upon reboot. Maybe the newer kernel
requires full wipe?(I know instructions say full wipe), but
I have been dirty flashing different mm builds of yours.
Wondering if I can just flash the new kernel from the rom in twrp
or do you think I will run into the same problem with crashing?
Just can't help myself I'm a flashaholic and wanted to try. Thanks

skalnas said:
Tried dirty flashing this over your latest 6.01 beanstalk
Click to expand...
Click to collapse
Slimrom isn't based on cm, so of course it's broken if you do that. Even flashing between cm variants without wiping system isn't a great idea.

r3t3ch said:
Slimrom isn't based on cm, so of course it's broken if you do that. Even flashing between cm variants without wiping system isn't a great idea.
Click to expand...
Click to collapse
Understood, I do realize that's a risk I take by flashing. That's why I have a fastboot cable and backups. I have had a lot of success switching between cm13 variants by dirty flashing without issue.
Didnt realize slim wasnt based on cm. Suppose I could try wiping system this time. Thanks

skalnas said:
Understood, I do realize that's a risk I take by flashing. That's why I have a fastboot cable and backups. I have had a lot of success switching between cm13 variants by dirty flashing without issue.
Didnt realize slim wasnt based on cm. Suppose I could try wiping system this time. Thanks
Click to expand...
Click to collapse
I'm not even sure it will work cleanly without a data wipe as well, though I understand the inconvenience. I usually use tibu to restore just user apps but if you have a lot of apps that can be time consuming as well.
Also to note, with all builds posted by alexander_32, the bootloader has enabled holding volume down to fastboot (vol up still recovery) so it can make entering fastboot mode a little more convenient.

skalnas said:
Understood, I do realize that's a risk I take by flashing. That's why I have a fastboot cable and backups. I have had a lot of success switching between cm13 variants by dirty flashing without issue.
Didnt realize slim wasnt based on cm. Suppose I could try wiping system this time. Thanks
Click to expand...
Click to collapse
You really should read instructions, descriptions, and follow them

Curious though I was able to upgrade your most recent beanstalk to your final beanstalk with the new kernel. Dirty flashed.
Sent from my Amazon Tate using XDA Premium 4 mobile app

skalnas said:
Curious though I was able to upgrade your most recent beanstalk to your final beanstalk with the new kernel. Dirty flashed.
Sent from my Amazon Tate using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No offense, but you better help me to make a test build for Slim6, than post stuff like this. And I'll make a test build for Omni today.

[W.I.P] AOSP 7.0.0_r6 Nougat, Clean Version

THIS IS NO LONGER BEING UPDATED
This was just about a direct copy of the ROM here I created due to the dev including opengapps in his builds: http://forum.xda-developers.com/nexus-7-2013/orig-development/p-aosp-n-7-0-google-shame-t3448008
They are no longer doing that, so I am focusing on contributing to that. The v0.6 build there is equivalent and a bit better than the v0.6.1 build here. Just use their's. (Leaving the links here for now, but really don't use them. )
Full credit to @DevSwift1 for all his work on this thus far. (and the other contributors listed below). Seriously, the work they have done is a thing of beauty and I'm only doing this out of necessity of doing the right thing. (I'd rather not be, but I said I would and it may be fun.)
What works:
Audio
Brightness
GPU Acceleration
Bluetooth
Wifi
GPS
NFC
Location services
Camera and video recording
Video playback
MTP
Sensors
Bugs:
- very poor 1080p video recording quality
- Google seems to think you are using a 2012 N7. I pulled part of the fix for that since it was only part and broke the build. It should be worked out next build. (or, the next build)
You can dirty flash, but you may need to uninstall and re-install any Google Apps you installed from the Play Store.
Change Log
V0.6.1
- Uses kernel that is not vulnerable to CVE-2016-2059. (@zaclimon's with @DevSwift1's patches to compile it on GCC 4.9. The stock N7 kernel was never vulnerable to that CVE and neither was that one which isn't heavily modified from it.)
V0.6
- Updated to Android-7.0.0_r6, NRD90U, Sept 6, 2016 Security Patch. (I think r4 was actually the security patch. Not sure if there is more in r6.)
- Note that this is missing the fix for CVE-2016-2059 which was part of the Sept Security Update, but resides in the kernel which isn't part of the AOSP build. I'm fixing that and will have an updated ROM or flashable kernel soon. (Hopefully. Building the kernel is new to me)
V0.5.1
- Fork of DevSwift1's V0.5 with Gapps removed.
- Location Services works with wifi
Sources:
https://github.com/nbehary/manifest
Download:
v0.6.1
V0.6
Very Unsupported, experimental Download for Deb
This builds correctly from my fork of Devswift1's stuff which included Deb. I have no idea if it works.
v0.6.1 (Just the new Kernel for CVE-2016-2059)
V0.X (it should be about v0.6 if it works. Same sources except the parts that are different between the devices.)
Get Gapps from here: (The Micro Edition is the largest that will install due to size constraints on the System partition.)
http://opengapps.org/
contributors:
DevSwift1
zaclimon
parrotgeek1

nbehary said:
Get Gapps from here: (I recommend the nano package. It works. There are issues with them being too large.)
http://opengapps.org/
Click to expand...
Click to collapse
I was able to get micro Gapps installed with about 90m free space using the original ROM..(Will that cause issues ?? ) . Actually downloaded minigapps ,but created a gapps-config to install micro . I noticed that without Google search being a system app ,it gets killed quite quickly and takes time to load .That seems to have gone
Sent from my Lenovo X3a40 using Tapatalk

vkk178 said:
I was able to get micro Gapps installed with about 90m free space using the original ROM..(Will that cause issues ?? ) . Actually downloaded minigapps ,but created a gapps-config to install micro . I noticed that without Google search being a system app ,it gets killed quite quickly and takes time to load .That seems to have gone
Sent from my Lenovo X3a40 using Tapatalk
Click to expand...
Click to collapse
Doing that should be fine I'd think. The only issue is running out of space and as long as you aren't doing that there shouldn't be issues. (I only recommend nano since that is what I have been using and it worked for me so far.)

Unless the ROM itself gets 90mb bigger in future updates, micro should always fit. Technically, nothing should be writing to /system after install since it's usually locked anyways. Any free space in that partition just sits idle, unused.

Any custom kernels works on it? Because stock is garbage. I saw nexus 5 reports of 6.0 versions working on 7.0

- There are reports of location not working without a GPS lock, for good reason. Play Services wasn't listed as a location provider.....common thing. I think I fixed it maybe, but in a effort to release this quickly, I haven't tested much. Please let me know if you still have issues.
Click to expand...
Click to collapse
You can mark this as fixed @nbehary
Thanks to you and to @DevSwift1 this has been posible thanks to him and i encourage him to continue working on this port, it's amazing so far and there are many users out there that thank you for your hard work and for giving this rom to the community. Thanks!
Also thanks to the rest of developers.
Beautiful widgets now locates correctly, and so many other apps like Waze or Meteogalicia (local weather apps) Thank you.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I get this when flashing. Afterwards attempting to flash gapps indicates that I'm still on Android 6.0.1.

Never mind. Just had to boot into the system and flash gapps afterwards.

I've been following all of these 7.0 ROM threads since the beginning. It looks like enough fixes have been done to this rom (thanks to the work of ALL the devs involved) for me to finally install it. Great job everyone!
DISCLAIMER FOR THE REST OF THE POST: Not for noobs or the faint of heart
I just dirty flashed this right over the last official MM and full device encryption enabled. For the most part things went smoothly. The only thing (and it's quite a lot for me) I had to do was uninstall and re-install, through the Play Store, just about everything from Google. The only app that didn't crash was Play Games - almost anything else with a Google account crashed, including MightyText (I originally suspected this was because I used nano GApps, which removed most GApps from /system - but YouTube Creator Studio and MightyText debunk that theory). After doing this everything seems to be running smoothly, but I'll continue to monitor battery usage. AOSP Calendar and Contacts have been disabled, in favor of the Google versions.
The biggest reason I wanted N was so I could use Night Mode and get rid of Twilight. The option is still baked into AOSP even though it won't appear in the Quick Settings shade. Download Night Mode Enabler from Play Store and the option returns.

Clean flashed 0.5.1, immediately rebooted back into recovery and flashed OpenGapps Pico and SuperSU 2.78 while wiping Dalvik and Cache between each step.
Everything works perfectly including the restoring of my Titanium app backups.
Thanks for supporting this device!

binglejellsx2 said:
The biggest reason I wanted N was so I could use Night Mode and get rid of Twilight.
Click to expand...
Click to collapse
Sorry for being off-topic, but Twilight is really bad compared to Chainfire's CF.lumen. Twilight adds a kind of overlay, while CF.lumen does it with root and a driver, which makes the screen not look washed out or blurry like Twilight. It's free, too. Otherwise there's the live display one in every CyanogenMod based rom.

FingerMove said:
Sorry for being off-topic, but Twilight is really bad compared to Chainfire's CF.lumen. Twilight adds a kind of overlay, while CF.lumen does it with root and a driver, which makes the screen not look washed out or blurry like Twilight. It's free, too. Otherwise there's the live display one in every CyanogenMod based rom.
Click to expand...
Click to collapse
Thanks, but now that Im on Nougat, I have a native solution available. The reason I used Twilight is because I don't root anymore. I'm aware of other solutions, but these days I'm looking for the simple stuff.
This ROM is exactly what I was looking for.

Can I skip tracks with volume keys?

Any get system ui tuner working?
Sent from my Nexus 7 using Tapatalk

dadymon53 said:
Any get system ui tuner working?
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Yes. Just help the settings wheel down for a few seconds, nothing too crazy. Just use it to display battery percentage

V0.6 is up on the main page. It just merges in the Sept Security Update.

Extreemator said:
Any custom kernels works on it? Because stock is garbage. I saw nexus 5 reports of 6.0 versions working on 7.0
Click to expand...
Click to collapse
Going to say likely not. I just tried ElementalX, with all default settings, and it boots to recovery. There may be ones that will (in theory there can be, this uses the stock 6.0 kernel far as I can tell).
It really is in the kernel dev's wheelhouse to fix things for a new Android release. I totally don't want to get into that world. Did enough messing around in the Linux Kernel in the 90's.
That said, if there are things on the AOSP side I can do to help things work, I can look into that.

nbehary said:
Going to say likely not. I just tried ElementalX, with all default settings, and it boots to recovery. There may be ones that will (in theory there can be, this uses the stock 6.0 kernel far as I can tell).
It really is in the kernel dev's wheelhouse to fix things for a new Android release. I totally don't want to get into that world. Did enough messing around in the Linux Kernel in the 90's.
That said, if there are things on the AOSP side I can do to help things work, I can look into that.
Click to expand...
Click to collapse
So it boots to OS with elementalX? Or boots only to recovery?

Glitch kernel has a version that is compatible, but I have not used it yet

Extreemator said:
So it boots to OS with elementalX? Or boots only to recovery?
Click to expand...
Click to collapse
It boots to recovery. I think it got as far as showing the logo for a split second before rebooting into recovery. (I also was wrong about this being stock maybe. It was compiled too recently, and not by Google. Not sure where it came from, since it is just a Binary in the repos. Could still be a very slightly modified, if at all, 6.0.1 stock.)

[ROM][NOUGAT][QUARK][AOKP 7.?]DROID Turbo/Moto MAXX

AOKP (Android Open Kang Project)
7.? Nougat for All Motorola "Quark" Devices (XT1225 | XT1250 | XT1254)
With Substratum/OMS Themes
KNO'DIS: I, OR ANYONE ELSE AT XDA, WILL NOT BE HELD RESPONSIBLE FOR "BRICKING" YOUR PHONE!! IF YOU MANAGE TO MAKE A BRICK, DUE TO YOUR "FUN-DA-MENTAL" INABILITY TO READ, GO BUILD A BBQ PIT WITH IT!! (Or ask for help, there's a lot of friendly people around here)
This is for the AOKP fans out there that are using the Motorola Quark, which includes: DROID Turbo, Moto MAXX and Turbo Maxx. It's stable, I use it daily, however it's still under development, see post #2 ("Extra Info") for additional information.
Screen Shots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Installation
Clean Install Recommend:
Use TWRP for a Full Backup
Wipe/Factory Reset
Flash ROM.zip + GApps
Clear Cache/Dalvik
Reboot
Upgrading
Use TWRP to Backup Data Only
Wipe/Factory Reset
Flash ROM.zip + GApps
Clear Cache/Dalvik
Reboot
Setup Phone
Reboot Recovery
Restore Data Backup
Download
Current Release
Open GApps 7.? (I used Pico)
Credits
Development:
@bhb27
ROM Testers:
@eddiemc12
@hpbrasil
@kitcostantino
@Nitefire77
@Shiftydogit
And, I've recently added more (PM me if you want your name here)
Sources
Source Code: AOKP
Device Tree: Motorola Quark
Kernel: BHB27 Stock Kernel

Extra Info
Most "bugs" have been fixed. IF you find one, feel free to share on this thread :good:
PLEASE, PLEASE:
Do a "clean install" before reporting issues, you may also want to clean your modem first using this:
Download Zip
(Flash using TWRP)

Kang 2

Great.
Is it using bhb27 kernel or you modified something in it?

Very nice, thanks @NepoRood

Debuffer said:
Great.
Is it using bhb27 kernel or you modified something in it?
Click to expand...
Click to collapse
Using bhb's stock CM14 kernel, it's running great. I'll be adding more information to the first 3 posts as time goes on :good:

NepoRood said:
Using bhb's stock CM14 kernel, it's running great. I'll be adding more information to the first 3 posts as time goes on :good:
Click to expand...
Click to collapse
But is it using Bhb kernel 1.0?
Or you changed something and it's your 1.0 version?

ROM was running great. Been running it a couple days without hassle

Nitefire77 said:
ROM was running great. Been running it a couple days without hassle
Click to expand...
Click to collapse
same here ,smooth and fast with no reboots.

For those who has problems installing because of com.android.phone has stopped
First fresh install
Reboot
It'll problem
Reboot in recovery
Dirty install the rom again (without any configuration done in the first boot)
Reboot
Worked for me.
@NepoRood can you please add caffeine tile in next update? And maybe zzmoove gov? I know its just the first build, but this additions would be really loved. Thank you for such a good job.

Link to kernel not working. Could you please confirm

janine13 said:
Link to kernel not working. Could you please confirm
Click to expand...
Click to collapse
It's a typo, my bad. You know that is the source code, right?

@Debuffer, personally, I have no use for all the "extra" functionality of a custom kernel. After the holidays, I'll look into providing a custom kernel along with the stock one (like bhb does with RR). Just out of curiosity, did you install the Kernel Auditor app?

NepoRood said:
@Debuffer, personally, I have no use for all the "extra" functionality of a custom kernel. After the holidays, I'll look into providing a custom kernel along with the stock one (like bhb does with RR). Just out of curiosity, did you install the Kernel Auditor app?
Click to expand...
Click to collapse
Yeah. I use Bhb kernel since 5.1.
Thank you for this.

NepoRood said:
It's a typo, my bad. You know that is the source code, right?
Click to expand...
Click to collapse
Yeah, I got that part after I went to the site. I was looking for the kernel in a bid to try using it with the ROM. I have been using the ROM for the past 3 hours now and all seems smooth and stable so far. I will keep running it and see, if it stays this way I just may have a new daily driver

Great rom, it runs very well. Only issue with it, is that the torch using gestures is very inconsistent. Similar to what happened when 6.0 roms first came out. It either takes 30 seconds to activate, or never works at all.
Also, the setting to control media volume by default doesn't work. This is the same on cm14.1, so imagine it's not something you can easily change in the rom.

Users with GPS problem only make the flash of this file that will be solved.
https://www.androidfilehost.com/?fid=24531035584725320
Please add publication. @NepoRood

Very good rom.stable and smoot.but there is little laggy for camera conect in many apk.more of it happens for front camera
Sent from my DROID Turbo using Tapatalk

great rom, liked it alot, clean installed it without any phone stop errors, bhb27's auditor n govtuner works perfectly aswell
only one issue i have was when i take photos im not able to share them online for some reason (example via watsapp or facebook) it always shows "sharing failed please try again" msg. dont know what happened there i tried re-installing watsapp and also a different camera app but still get the same error.
reverted back to 6.1 for now as i really need photo share as my work is depended on it, although i did notice the pictures i took on 7.1 now in the gallery were corrupt n un-viewable aswell ? was there something i did wrong? should i try flashing again?

Pakman300 said:
great rom, liked it alot, clean installed it without any phone stop errors, bhb27's auditor n govtuner works perfectly aswell
only one issue i have was when i take photos im not able to share them online for some reason (example via watsapp or facebook) it always shows "sharing failed please try again" msg. dont know what happened there i tried re-installing watsapp and also a different camera app but still get the same error.
reverted back to 6.1 for now as i really need photo share as my work is depended on it, although i did notice the pictures i took on 7.1 now in the gallery were corrupt n un-viewable aswell ? was there something i did wrong? should i try flashing again?
Click to expand...
Click to collapse
There are 2 folders where pictures are stored: DCIM and Pictures
Using the built in file explorer (or a PC), rename each of these. I did DCIM2 and Pictures2, then use your phone to take a picture. Both folders will be recreated. Then, drag and drop everything from the #2 folder into the corresponding "New" folder.
Hassle? Just a bit, but we did just change branches on our android phones :laugh:

Database Info

welcome