[Completed] Samsung Galaxy A9 Softbricked, cannot Flash ROM because of FRP Lock - XDA Assist

I recently bought a SM-A9000
It was originally from China and then sold by someone in Indonesia.
During firmware update from lollypop to marshmallow, the update failed, causing the phone to stuck on bootloop, and now I can only access 2 screen : the screen saying "an error has occured while updating the device software use the emergency recovery function in the smart switch pc software" ; and ODIN mode screen
I tried the recovery function in smart switch but it failed. I download every ROM version from sammobile and flash it through odin, but it also failed.
I tried 2 region ROM, the CHC (China open) and TGY (Hong kong). It stuck on 2 different point. With the CHC, it stucked during "aboot.mbn" with the my phone screen saying "FRP is enabled, not allowed download non-FRP aboot binary". With the TGY, it passed the "aboot.mbn" but stucked during writing the ROM saying file is too larze, ext4 invalid.
Here is some data on the odin mode screen :
Binary status : Original
CROM Service : unlock
FRP lock : ON
What should I do? I am desperately in need of help... Thank you..

Hello and thank you for using XDA Assist,
please post your question here:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards
Trafalgar Square
XDA Assist

Related

[Completed] i need help

My Samsung Galaxy Mega 6.3 (SGH-I527 ) AT&T is giving me problems after trying to get new firmware to remove my root after i tried using ODIN 3 to basically turn my phone into stock it instead says it failed and now every time i boot up my phone it puts me straight into ODIN mode with an error saying that my " firmware upgrade encountered an issue. Please select recovery mode in kies & try again. I download Samsung Kies and it won't let me do a emergency recovery it says i need a emergency recovery code one problem i can't access my phone besides Odin mode. Does anyone have any answers that will fix this mess.
Hi there,
You'd be best served asking for help from the experts who own your device here:
[FAQ] [Noob Friendly] HELP THREAD - POST ALL YOUR SUPPORT QUESTIONS HERE
Good luck

Samsung Galaxy S6 Unlocked Version SM-G920T after root problems and issues

Hi,
I tried rooting my s6 unlocked version runining 5.1.1 using "CF-Auto-Root-zerofltetmo-zerofltetmo-smg920t". After reboot it have me a "Recovery is not seandorid enforcing" read about using TWRP to wipe cache and reboot and should load. Now only shows samsung logo for acouple seconds and reboots. Tried loading stock firmware "G920TUVU2COF6" and "G920TUVU1AOCG" using odin and it fails at the "write nand" part in odin and on the phone it dispalys "sw rev check fail device 3 binary 2"............so stuck now on the samsung logo showing and phone is in a loop...............how be grateful for any help with this........... I read that the firmware has to be "3" and looking at find one and trying..................but in the meantime if anyone has a fix for this please provide steps and fix............thanks
Lando
lando09 said:
Hi,
I tried rooting my s6 unlocked version runining 5.1.1 using "CF-Auto-Root-zerofltetmo-zerofltetmo-smg920t". After reboot it have me a "Recovery is not seandorid enforcing" read about using TWRP to wipe cache and reboot and should load. Now only shows samsung logo for acouple seconds and reboots. Tried loading stock firmware "G920TUVU2COF6" and "G920TUVU1AOCG" using odin and it fails at the "write nand" part in odin and on the phone it dispalys "sw rev check fail device 3 binary 2"............so stuck now on the samsung logo showing and phone is in a loop...............how be grateful for any help with this........... I read that the firmware has to be "3" and looking at find one and trying..................but in the meantime if anyone has a fix for this please provide steps and fix............thanks
Lando
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
Moving your thread to S6 Q&A,Help and Troubleshooting.Experts there may be able to help you.
___
v7
XDA Assist
Hi,
Perhaps this link can be of help.
Look at this post.
Hope this helps.
lando09 said:
Hi,
I tried rooting my s6 unlocked version runining 5.1.1 using "CF-Auto-Root-zerofltetmo-zerofltetmo-smg920t". After reboot it have me a "Recovery is not seandorid enforcing" read about using TWRP to wipe cache and reboot and should load. Now only shows samsung logo for acouple seconds and reboots. Tried loading stock firmware "G920TUVU2COF6" and "G920TUVU1AOCG" using odin and it fails at the "write nand" part in odin and on the phone it dispalys "sw rev check fail device 3 binary 2"............so stuck now on the samsung logo showing and phone is in a loop...............how be grateful for any help with this........... I read that the firmware has to be "3" and looking at find one and trying..................but in the meantime if anyone has a fix for this please provide steps and fix............thanks
Lando
Click to expand...
Click to collapse
I was curious did you ever get this resolved

[Completed] i am having issues with flashing recovery and even stock rom with samsung s4

my phone is stuck into a bootloop even recovery doesnt work it restarts after 5 secs once we go into recovery, cant flash any thing with even odin it shows odin flash stats as pass but nothing working in phone its still there help me out guy!!!!!!!it is also showing write protection in download mode its not an carrier mobile i have purchased it in india binary shows official csb-config-lsb:0x30 bootloader ap swrev:2 write protection:enable
Hello,
Welcome to XDA.
To better assist you please post your device model number and I will guide you to where you may find your answer.
Register an XDA account to post and reply in the forums.

[Completed] [SM-A500FU]Reactivation lock after custom recovery install AND odin fail. Please Help

Hey folks!
A few days ago, i rooted my Samsung Galaxy A5 (Sm-a500fu) with Kingroot, which was no problem.
Yesterday i decided to install TWRP as custum recovery. I downloaded it, and flashed it with Flashify. The really next boot got blocked with the error message: "Custom binary blocked by reactivation lock; secure fail: recovery". The only avaiable thing was download mode.
So I looked for a solution on google and all it was saying was to flash the stock rom again. I tried to flash it with Odin3 but right after the start i got a "FAIL!" in Odin.
Now I don't know what to do because I don't want to lose the data (esp Images) on my phone. I found a solution that could work: Download a "Pit-File", hit the repartition checkbox in odin and then start.
After that, the other problem persists: The reactivation lock is still there
Is anyone able to help me?
Hello and thanks for using XDA Assist,
A dedicated forum for your device is located here. You can visit Galaxy A3, A5, A7, A8 Q&A, Help & Troubleshooting and ask your questions there, experts for your device should be able to help you there.
Always read carefully before proceeding.
Good luck,
DC07

[Completed] [SM-G925T]S6 Edge NT working , FRP lock is on nd i'm stuck at need to check DRK first

hello,
i have a problem with my s6 edge since last week.
i gave my phone to someone and when i got it back the sim card was not working,(i made some research and i noticed that the Efs was damaged). i then tried to use Kies to restore the phone. After the restoration (Android 6.0.1) , the phone tried to boot and i got this error: " dm-verity verification failed, need to check DRK first... ". i then began my research again and i founded one solution on youtube " a file that i had to flash via odin " . I then decided to try it out , and when i tried it failed, i receive that error: " Custom binary blocked by FRP Lock " . Now i have a phone that i can not use, please help me .
thank you
note: the phone was rooted
XDA Visitor said:
hello,
i have a problem with my s6 edge since last week.
i gave my phone to someone and when i got it back the sim card was not working,(i made some research and i noticed that the Efs was damaged). i then tried to use Kies to restore the phone. After the restoration (Android 6.0.1) , the phone tried to boot and i got this error: " dm-verity verification failed, need to check DRK first... ". i then began my research again and i founded one solution on youtube " a file that i had to flash via odin " . I then decided to try it out , and when i tried it failed, i receive that error: " Custom binary blocked by FRP Lock " . Now i have a phone that i can not use, please help me .
thank you
note: the phone was rooted
Click to expand...
Click to collapse
Hi and welcome to XDA.
Your device has a dedicated forum here:
> T-Mobile Samsung Galaxy S6 Edge > T-Mobile Galaxy S6 Edge Q&A, Help & Troubleshooting
All questions regarding your device belong in the forum linked above. You'll need to create an account first so you can post in the main forums.
Good luck

Categories

Resources