Hi,
I tried rooting my s6 unlocked version runining 5.1.1 using "CF-Auto-Root-zerofltetmo-zerofltetmo-smg920t". After reboot it have me a "Recovery is not seandorid enforcing" read about using TWRP to wipe cache and reboot and should load. Now only shows samsung logo for acouple seconds and reboots. Tried loading stock firmware "G920TUVU2COF6" and "G920TUVU1AOCG" using odin and it fails at the "write nand" part in odin and on the phone it dispalys "sw rev check fail device 3 binary 2"............so stuck now on the samsung logo showing and phone is in a loop...............how be grateful for any help with this........... I read that the firmware has to be "3" and looking at find one and trying..................but in the meantime if anyone has a fix for this please provide steps and fix............thanks
Lando
lando09 said:
Hi,
I tried rooting my s6 unlocked version runining 5.1.1 using "CF-Auto-Root-zerofltetmo-zerofltetmo-smg920t". After reboot it have me a "Recovery is not seandorid enforcing" read about using TWRP to wipe cache and reboot and should load. Now only shows samsung logo for acouple seconds and reboots. Tried loading stock firmware "G920TUVU2COF6" and "G920TUVU1AOCG" using odin and it fails at the "write nand" part in odin and on the phone it dispalys "sw rev check fail device 3 binary 2"............so stuck now on the samsung logo showing and phone is in a loop...............how be grateful for any help with this........... I read that the firmware has to be "3" and looking at find one and trying..................but in the meantime if anyone has a fix for this please provide steps and fix............thanks
Lando
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
Moving your thread to S6 Q&A,Help and Troubleshooting.Experts there may be able to help you.
___
v7
XDA Assist
Hi,
Perhaps this link can be of help.
Look at this post.
Hope this helps.
lando09 said:
Hi,
I tried rooting my s6 unlocked version runining 5.1.1 using "CF-Auto-Root-zerofltetmo-zerofltetmo-smg920t". After reboot it have me a "Recovery is not seandorid enforcing" read about using TWRP to wipe cache and reboot and should load. Now only shows samsung logo for acouple seconds and reboots. Tried loading stock firmware "G920TUVU2COF6" and "G920TUVU1AOCG" using odin and it fails at the "write nand" part in odin and on the phone it dispalys "sw rev check fail device 3 binary 2"............so stuck now on the samsung logo showing and phone is in a loop...............how be grateful for any help with this........... I read that the firmware has to be "3" and looking at find one and trying..................but in the meantime if anyone has a fix for this please provide steps and fix............thanks
Lando
Click to expand...
Click to collapse
I was curious did you ever get this resolved
Related
my phone is stuck into a bootloop even recovery doesnt work it restarts after 5 secs once we go into recovery, cant flash any thing with even odin it shows odin flash stats as pass but nothing working in phone its still there help me out guy!!!!!!!it is also showing write protection in download mode its not an carrier mobile i have purchased it in india binary shows official csb-config-lsb:0x30 bootloader ap swrev:2 write protection:enable
Hello,
Welcome to XDA.
To better assist you please post your device model number and I will guide you to where you may find your answer.
Register an XDA account to post and reply in the forums.
Hey folks!
A few days ago, i rooted my Samsung Galaxy A5 (Sm-a500fu) with Kingroot, which was no problem.
Yesterday i decided to install TWRP as custum recovery. I downloaded it, and flashed it with Flashify. The really next boot got blocked with the error message: "Custom binary blocked by reactivation lock; secure fail: recovery". The only avaiable thing was download mode.
So I looked for a solution on google and all it was saying was to flash the stock rom again. I tried to flash it with Odin3 but right after the start i got a "FAIL!" in Odin.
Now I don't know what to do because I don't want to lose the data (esp Images) on my phone. I found a solution that could work: Download a "Pit-File", hit the repartition checkbox in odin and then start.
After that, the other problem persists: The reactivation lock is still there
Is anyone able to help me?
Hello and thanks for using XDA Assist,
A dedicated forum for your device is located here. You can visit Galaxy A3, A5, A7, A8 Q&A, Help & Troubleshooting and ask your questions there, experts for your device should be able to help you there.
Always read carefully before proceeding.
Good luck,
DC07
I recently bought a SM-A9000
It was originally from China and then sold by someone in Indonesia.
During firmware update from lollypop to marshmallow, the update failed, causing the phone to stuck on bootloop, and now I can only access 2 screen : the screen saying "an error has occured while updating the device software use the emergency recovery function in the smart switch pc software" ; and ODIN mode screen
I tried the recovery function in smart switch but it failed. I download every ROM version from sammobile and flash it through odin, but it also failed.
I tried 2 region ROM, the CHC (China open) and TGY (Hong kong). It stuck on 2 different point. With the CHC, it stucked during "aboot.mbn" with the my phone screen saying "FRP is enabled, not allowed download non-FRP aboot binary". With the TGY, it passed the "aboot.mbn" but stucked during writing the ROM saying file is too larze, ext4 invalid.
Here is some data on the odin mode screen :
Binary status : Original
CROM Service : unlock
FRP lock : ON
What should I do? I am desperately in need of help... Thank you..
Hello and thank you for using XDA Assist,
please post your question here:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards
Trafalgar Square
XDA Assist
I have bricked my phone as i was trying to install a new official custom firmware; i bought my phone from internet and it came rooted. I was trying to get the phone unrooted by installing the custom official firmware. The model inside was SM-G920F written in about device and Android version - 5.1.1 with baseband G920FXXU2COH2. I downloaded the official firmware from SAMMOBILE and i odin all three types of version, 3.10.6, 3.10.7 and 3.11.1 as i have read in the internet that Samsung galaxy S6 has problems with versions of odin. The custom official firmware was for G920F as i went in download mode the model displayed was SM920P written official and i ignored the matter knowing it might be wrong as i read on the details i was sure that it was SM-G920F. Now my phone has stuck in boot in the screen Samsung Galaxy S6, it wont charge, it wont go into recovery mode when i press VOL UP+HOME+POWER, I can go to download mode i tried to go for TWRP recovery it went back on and later returned to the boot screen. I need your assistance is my phone dead i have used for 3 days only. Please please please
XDA Visitor said:
I have bricked my phone as i was trying to install a new official custom firmware; i bought my phone from internet and it came rooted. I was trying to get the phone unrooted by installing the custom official firmware. The model inside was SM-G920F written in about device and Android version - 5.1.1 with baseband G920FXXU2COH2. I downloaded the official firmware from SAMMOBILE and i odin all three types of version, 3.10.6, 3.10.7 and 3.11.1 as i have read in the internet that Samsung galaxy S6 has problems with versions of odin. The custom official firmware was for G920F as i went in download mode the model displayed was SM920P written official and i ignored the matter knowing it might be wrong as i read on the details i was sure that it was SM-G920F. Now my phone has stuck in boot in the screen Samsung Galaxy S6, it wont charge, it wont go into recovery mode when i press VOL UP+HOME+POWER, I can go to download mode i tried to go for TWRP recovery it went back on and later returned to the boot screen. I need your assistance is my phone dead i have used for 3 days only. Please please please
Click to expand...
Click to collapse
Hi and welcome to XDA.
Please create an account so you can have full posting privileges.
Then you can post post in your device section:
Galaxy S6 Q&A, Help & Troubleshooting
Experts there may be able to help you.
Good luck
I tried to root my device and it went quite well. Then I tried to flash a custom rom (Darkwolf S7 edge port) on my phone but I ended up in a bootloop where it was stuck on the samsung logo for hours. I tried different stuff to get out of it but nothing worked so I decided to flash the stock rom onto my phone and at the odin status I get "FAIL". And on my device it shows "Volume Size is too big 4620289 < 4718599. And my phone is unusable. I need some help asap to fix it.
XDA Visitor said:
I tried to root my device and it went quite well. Then I tried to flash a custom rom (Darkwolf S7 edge port) on my phone but I ended up in a bootloop where it was stuck on the samsung logo for hours. I tried different stuff to get out of it but nothing worked so I decided to flash the stock rom onto my phone and at the odin status I get "FAIL". And on my device it shows "Volume Size is too big 4620289 < 4718599. And my phone is unusable. I need some help asap to fix it.
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist.
Please have a look at the Note 3 homepage:
http://forum.xda-developers.com/galaxy-note-3
If you create an XDA account, you can ask the experts for help, here:
http://forum.xda-developers.com/galaxy-note-3/help
Good luck and welcome to XDA!