Related
**UPDATE**
NEW VERSION
THIS RELIES ON ADB COMMANDS, SO IF YOU DO NOT HAVE USB DEBUGGING TURNED ON, OR A CUSTOM RECOVERY TO BOOT TO, THEN IT WILL NOT BE AS SIMPLE AS JUST RUNING THE PROGRAM.
Another user was having issues because he had an emulator installed, so I updated the file to give you the choice between an emulator, or device. I intend to update further to allow you to check for and select an individual device, that will come soon..
----------------------------------------------------------------------------------------------------------------
Recently my Galaxy s2's screen smashed, and, after replacing it with a GS4, i realized that many of my pictures were stuck on the internal sd card of the GS2. Being unable to turn on mass storage mode, I made a very simple tool that makes using adb pull a simple, painless process, even for the most computer illiterate of android users. Hope this helps if anyone needs it.
For anyone having issues...
If you had not previously activated USB Debugging, there are several steps you need to follow in order to enable ADB
SCREEN WORKING TOUCH BROKEN NO CUSTOM RECOVERYfirst, if you can see your screen, and have access to an otg cable, plug a mouse in to the otg cable, and the otg cable into the phone. Use the mouse to enable USB debugging, or to transfer files.
HOW TO ENABLE USB DEBUGGING
SCREEN WORKING TOUCH BROKEN WITH CUSTOM RECOVERYboot to your custom recovery ADB commands will work here. (usually hold vol- + pwr)
HOW TO BOOT TO RECOVERY
Once in custom recovery, connect the device to the PC.
open CMD and enter the following commands;
cd c:\android (this is your ADB path, c:\android is default)
adb devices
The result should be something like
List of devices attached
051a4dd5 recovery
^^this number will be different for you
if you get a result on ADB devices, then you can use the program
SCREEN BROKEN TOUCH BROKEN WITH CUSTOM RECOVERYboot to your custom recovery ADB commands will work here. (usually hold vol- + pwr)
HOW TO BOOT TO RECOVERY
Once in custom recovery, connect the device to the PC.
open CMD and enter the following commands;
cd c:\android (this is your ADB path, c:\android is default)
adb devices
The result should be something like
List of devices attached
051a4dd5 recovery
^^this number will be different for you
if you get a result on ADB devices, then you can use the program
SCREEN BROKEN TOUCH BROKEN NO CUSTOM RECOVERYnow things get complicated...
*The following is paraphrased from this site
1. download the custom recovery image for your device. Copy the recovery image to a convenient location on your computer, preferably with a short path. We will be placing it on the C Drive directly (not in any folder) and using that in the next steps.
Note: The recovery image should have .img extension. If it is in a zip file, extract the .img file from it.
I recommend clockwork mod non touch from this page
2. Power your device off and reboot your device to FASTBOOT or DOWNLOAD MODE depending on which type of device you have.
(most devices are fastboot, SAMSUNG typically uses DOWNLOAD MODE)
how to boot to fastboot or download mode
[FASTBOOT]3. Connect your device to your computer via USB and wait till you see the PC recognize the device
to check if your device is in fastboot and connected use CMD and enter the following commands;
cd c:\android (this is your ADB path, c:\android is default)
fastboot devices
you will see a list of connected devices. if not, something went wrong.
4. Launch Command Prompt and type the following commands;
cd c:\android (this is your ADB path, c:\android is default)
fastboot flash recovery c:\recovery.img
5. Wait for the process to finish.
6. Turn device off then boot to your custom recovery ADB commands will work here. (usually hold vol- + pwr)
HOW TO BOOT TO RECOVERY
Once in custom recovery, connect the device to the PC.
open CMD and enter the following commands;
cd c:\android (this is your ADB path, c:\android is default)
adb devices
The result should be something like
List of devices attached
051a4dd5 recovery
^^this number will be different for you
if you get a result on ADB devices, then you can use the program
[RECOVERY MODE (SAMSUNG)]USE THE INSTRUCTIONS ON THIS PAGE
Once in custom recovery, connect the device to the PC.
open CMD and enter the following commands;
cd c:\android (this is your ADB path, c:\android is default)
adb devices
The result should be something like
List of devices attached
051a4dd5 recovery
^^this number will be different for you
if you get a result on ADB devices, then you can use the program
HOPEFULLY THIS HELPS. REMEMBER TO CHECK THE FORUM PAGE FOR YOUR DEVICE IF YOU RUN INTO ISSUES. THIS ISN'T ANYTHING THE MEMBERS OF XDA HAVEN'T DONE THOUSANDS OF TIMES OVER.
Don't forget to hit "Thanks"
i'll bump this thread for those who didn't see this amazing tool, this tool is really useful, thank you very much
Hi,
Sturggling to find the .adb file as my phone shows up as a "Portable Device" any ideas?
Cheers
Thank you!
I joined just to say thank you to FuzzyMeep Two. Thanks for an awesome tool! It worked better than advertised!
:good:
Thanks again!
-th3r3isnospoon
Question
Hi! Can I use that to restore data not from sdcard but from internal memory of the device? I was storing photos on device memory on my Asus TF300T and now its bricked. I need to restore these photos, my girlfriend has something like 1000 of them from her trip to Caracas. Its very important for her. I already managed to connect the device through fastboot and I launched anb in cmd. What should I do next? Please help me guys
koperkowy said:
Hi! Can I use that to restore data not from sdcard but from internal memory of the device? I was storing photos on device memory on my Asus TF300T and now its bricked. I need to restore these photos, my girlfriend has something like 1000 of them from her trip to Caracas. Its very important for her. I already managed to connect the device through fastboot and I launched anb in cmd. What should I do next? Please help me guys
Click to expand...
Click to collapse
Yes, when it references SD Card it means the internal "SD" storage built in to the phone, not the removable one. It should work as long as ADB can connect.
Sorry for taking so long to reply, i really hope you got your pictures back.
FuzzyMeep Two said:
Recently my Galaxy s2's screen smashed, and, after replacing it with a GS4, i realized that many of my pictures were stuck on the internal sd card of the GS2. Being unable to turn on mass storage mode, I made a very simple tool that makes using adb pull a simple, painless process, even for the most computer illiterate of android users. Hope this helps if anyone needs it.
P.S. I apologize if i have posted this in the wrong place, if so please let me know.
Click to expand...
Click to collapse
Really great stuff - so simple but so effective. Cheers and thanks.
Error msg
zobes said:
Really great stuff - so simple but so effective. Cheers and thanks.
Click to expand...
Click to collapse
When i run that tool, i get the error mesg: more than one device and emulator,
I dont want to uninstall the emulator coz it was a headache getting it running
How i procede to select the device to be used
alisdairjk said:
When i run that tool, i get the error mesg: more than one device and emulator,
I dont want to uninstall the emulator coz it was a headache getting it running
How i procede to select the device to be used
Click to expand...
Click to collapse
NEW VERSION
Try this, i haven't gotten to test it, so please let me know if it worked for you, I added the option of selecting an emulator or USB device, because of your post. Hopefully it helps.
When I try to run this I also get an error message saying that the adb.exe file cannot be found.
Please can anyone help?
Joeb29 said:
When I try to run this I also get an error message saying that the adb.exe file cannot be found.
Please can anyone help?
Click to expand...
Click to collapse
Have you also installed ADB, as well as this software?
I'm also having an issue - I have installed java, java SDK and ADB, so I can now run the data recovery tool. But when I do I'm getting "error:device not found" - am I missing drivers or something? I couldn't get all the way on the ADB configuration, because part of it required me to do something on the device... anyway, looks like the computer isn't recognising the the phone at the moment.
Any help very gratefully received (phone is Samsung Galaxy S2).
joffmeister said:
Have you also installed ADB, as well as this software?
I'm also having an issue - I have installed java, java SDK and ADB, so I can now run the data recovery tool. But when I do I'm getting "error:device not found" - am I missing drivers or something? I couldn't get all the way on the ADB configuration, because part of it required me to do something on the device... anyway, looks like the computer isn't recognising the the phone at the moment.
Any help very gratefully received (phone is Samsung Galaxy S2).
Click to expand...
Click to collapse
I have the same situation right now. Managed to make your program work then I get the "error:device not found". My phone does show up in the computer folder(albeit not in mass storage mode), but isn't that what this program was made to work around?
My phone is a LG Optimus G with a smashed glass... The LCD still displays fine, but I'm stuck at my swipe lock because the digitizer is dead.
Thank you for your help and your wonderful program.
Thanks for this app. My girlfriend broke her screen and digitizer on her Galaxy S4. She never turned USB Debugging mode and has a lock on her screen. When using your app I get the same error when I use adb by itself which is "error: closed". ADB detects my phone but any command I use in ADB or with your app I get that same error.
Do you know how to fix this? Thanks in advance.
Thanks a lot man.
dude this tool is just amazing and does exactly what it promised. I was spending sleepless nights thinking about how to recover my data from my broken galaxy nexus and now that I have it I can rest easy. Seriously can't thank you enough for this. Just joined xda to thank you buddy.:laugh::fingers-crossed:
Getting an error "The system cannot find the path specified."
I start the recovery tool, set eh adb path successfully, and then I get this error. If I try running the recovery to pull the DCIM library I get this:
"error: device not found"
What can I do?
Thanks!
Either way this is an amazing tool, seeing how it helped some people already. :good:
Hi, Seem to have the same problem as many others, Device not found. I cant change to MTP mode on my LG G2.
I hope someone can find a solution to this problem.
Program seems amazing doh.
Hello,
This is really a great tool ! I was wondering if you could add the possibility to recover the external sd card aswell.
Device not found
Tried to recover a Samsung Galaxy S3 mini with a broken screen
I installed adb and RecoverData, run it and then get a "device not found error"
What can I do?
Amazing app. thank you so much :good:
FuzzyMeep Two said:
**UPDATE**
NEW VERSION
Another user was having issues because he had an emulator installed, so I updated the file to give you the choice between an emulator, or device. I intend to update further to allow you to check for and select an individual device, that will come soon..
----------------------------------------------------------------------------------------------------------------
Recently my Galaxy s2's screen smashed, and, after replacing it with a GS4, i realized that many of my pictures were stuck on the internal sd card of the GS2. Being unable to turn on mass storage mode, I made a very simple tool that makes using adb pull a simple, painless process, even for the most computer illiterate of android users. Hope this helps if anyone needs it.
Don't forget to hit "Thanks"
Click to expand...
Click to collapse
Hi, Thank you very musch, It's so usefull for me.. :angel:
Hi after reading through the post on GitHub on how to simply root your shield I have a few questions that the tutorial doesn't make clear:
1)There are a ton of files at the top and not sure what to do with them...
2) There is a bit where it explains "On your computer, navigate into the directory containing this file and enter the following command:
fastboot boot zImage_dtb ramfs.img.gz"
But it doesn't say that after you open the directory what you do with it?
Do you keep the window open and that's fine?
Do you type in it's location into command prompt before you type in: fastboot boot zImage_dtb ramfs.img.gz?
Just a bit confused as to what all the files are and where I put them and how they have to be utilised etc
Just need clarification for peace of mind
wanted to post the link but forum won't let me yet
Root explanation
Hi here is the main walkthrough from github but as I said there are a few plot holes for people who are new.
If your SHIELD is already unlocked, you can skip this section.
SHIELD ships with an unlockable bootloader. The bootloader is locked by default, which prevents anyone (including yourself) from booting custom OSes and changing system partitions to potentially obtain extra privileges. This is a significant security feature: in the event that your device gets stolen, an attacker will not be able to retrieve your personal data or use your device if your lock screen has a password set.
By unlocking the bootloader, you allow anyone with physical access to your SHIELD to boot custom images and flash system partitions. This opens the way for an attacker to access your personal information or physically damage your device. For this reason, unlocking the bootloader will erase all your personal data like a factory reset does (so a potential thief cannot get it) and will also void your warranty.
If you know you really, really want to take these risks, here is how you unlock SHIELD's bootloader.
Switch your SHIELD off (long press the NVIDIA logo button and select Power off).
Power your SHIELD on while maintaining the back and home buttons pressed (these are the two buttons that lie under the big NVIDIA-logo button, on its left and right). Release them once you see the bootloader screen.
Connect your SHIELD to your computer using a USB cable.
On your computer, enter the following command:
fastboot oem unlock
This will display the unlock menu. Read the disclaimer and think one last time about what you are doing. This is your last chance to stop.
Use the back and home buttons to select your option. If you decide to continue, select Unlock and press the NVIDIA-logo button to validate. Your personal data will be erased and your device marked as warranty-void permanently.
Regardless of your choice, you will be back to the bootloader screen. Using the same buttons, navigate to Poweroff and select this to power your SHIELD off.
Rooting SHIELD
Now your bootloader is unlocked, but you still don't have root access. For this, we need to install SuperSU, and we will do so by booting a custom Linux image that will do this for us.
Power your SHIELD on while maintaining the back and home buttons pressed (these are the two buttons that lie under the big NVIDIA-logo button, on its left and right). Release them once you see the bootloader screen.
Connect your SHIELD to your computer using a USB cable
On your computer, navigate into the directory containing this file and enter the following command:
fastboot boot zImage_dtb ramfs.img.gz
The kernel and ramdisk will be downloaded and started. You will see 4 penguins on your screen, and the message ROOTING SHIELD will appear. Shortly after, your device will reboot. Congratulations, you are rooted!
For some unknown reason USB debugging in Developer options might become unchecked after rooting. You will need to re-check it if you want to use ADB.
It is safe to perform the rooting operation as many times as you want (e.g. after an OTA). Your user data will not be erased by rooting itself, it is the act of unlocking the bootloader that does.
Is there anyone who can add a little to this to make it more simple for a noob like me?
I understand there is a file set that is at the top of the page and I downloaded the files which include zImage_dtb ramfs.img.gz
but don't know how to utilise them etc
There are no videos on youtube of how to do it and if anyone can add just a few more steps so that I know where I'm going with this (don't want to brick my system).
I just want controller support installed like Tincore or gamekeyboard so I can unlock the potential of the games library on GooglePlay.
Thanks for reading.
you copy those two files "zImage_dtb" & "ramfs.img.gz" to the same directory your adb and fastboot executeables are (same directory you issued the oem unlock command from)
then navigate to the same directory you did the oem unlock from via command line then issue the command "fastboot boot zImage_dtb ramfs.img.gz"
it's pretty simple but I can run you through a simple example of what I did
1)download android sdk
2)copy platform tools folder to a directory on c drive (exp c:\tools\ )
3)copy the 2 files above to the same folder along with cwm recovery(optional)
4)boot shield into fastboot mode (home+back+power)
5)navigate to the folder with adb, fastboot, and the above files in it.
Code:
cd c:\tools
6)detect if fastboot driver is installed with "fastboot devices" if result, then continue, if no result, then check if correct driver and check connection
7)issue oem unlock command and follow the onscreen prompts
Code:
fastboot oem unlock
8)restart device, after a full boot cycle(wipes data), power back into fastboot
9)issue the "rooting image" command, device with automatically reboot
Code:
fastboot boot zImage_dtb ramfs.img.gz
*10) optionally reboot back into fastboot and install cwm recovery
Code:
fastboot flash recovery recovery.img
pretty simple
thanks for fast reply.
Ok so I have Two different versions of Android SDK (32 bit and 64 bit) which one do I use?
"copy platform tools to a directory on C drive (exp C:\TOOLS\)"
What are platform tools?
"copy the two files above to the same folder along with cwm recovery"
What two files? do you mean the zImage_dtb and ramfs.img.gz? Do they go into the C:\TOOLS\ folder?
"navigate to the folder with adb, fastboot, and the above files in it"
What do you mean by navigate? Do you simply mean open the folder or do I use a program to do this?
"Detect if fastboot driver is installed with "fastboot devices" if result, then continue, if no result, then check if correct driver and check connection"
What's fastboot devices? What does result and no result mean? What does Check driver and check connection mean? how dod I do that?
I'm confused by all the lingo, what applications I should be using and when exactly do I start using command lines etc
Thanks for help so far been great but I need step by step instructions eg
open folder, copy and paste file1 and file 2 to this folder
open application X
click import file 1 and file 2
type XXXXXX\root\cdrive into command
press enter
see?
I do not know what some of the words mean and how to do some of the stuff the tutorial says. It's jargon and I have all these files, in all these folders with no idea how to do this from start to finish.
Appreciate the help so far but you are dealing with a novice. I know the work won't take long but I need all the relevant info, in one list, with consistent language to ensure I do everything as it should be done.
Bless you sir and...
Good luck
If your confused by my instructions you need to wait for a "one click" installer, sorry.
gogul1 said:
Ok so I have Two different versions of Android SDK (32 bit and 64 bit) which one do I use?
"copy platform tools to a directory on C drive (exp C:\TOOLS\)"
What are platform tools?
"copy the two files above to the same folder along with cwm recovery"
What two files? do you mean the zImage_dtb and ramfs.img.gz? Do they go into the C:\TOOLS\ folder?
"navigate to the folder with adb, fastboot, and the above files in it"
What do you mean by navigate? Do you simply mean open the folder or do I use a program to do this?
"Detect if fastboot driver is installed with "fastboot devices" if result, then continue, if no result, then check if correct driver and check connection"
What's fastboot devices? What does result and no result mean? What does Check driver and check connection mean? how dod I do that?
I'm confused by all the lingo, what applications I should be using and when exactly do I start using command lines etc
Thanks for help so far been great but I need step by step instructions eg
open folder, copy and paste file1 and file 2 to this folder
open application X
click import file 1 and file 2
type XXXXXX\root\cdrive into command
press enter
see?
I do not know what some of the words mean and how to do some of the stuff the tutorial says. It's jargon and I have all these files, in all these folders with no idea how to do this from start to finish.
Appreciate the help so far but you are dealing with a novice. I know the work won't take long but I need all the relevant info, in one list, with consistent language to ensure I do everything as it should be done.
Bless you sir and...
Good luck
Click to expand...
Click to collapse
Step by step instructions like that would take quite a long time to write. Its basically assumed that navigate is a straight forward instruction, namely, open My Computer, click C:\, click something else, etc etc. 32 bit vs 64 bit, again, you should know what your computer is running and use the correct one respectively.
The reason they dont issue novice instructions is for 1 reason only. People who such as yourself claim to not understand the "jargon" are also those who are more likely to make a mistake when rooting. This can lead to a completely bricked device, ie one that will no longer turn on and load up android, totally dead device. As far as the manufacturer is concerned, a bricked device unless bricked by one of their own updates on a non rooted shield installed correctly, is not covered by warranty. This leads said novice to accuse the tutorial writer of having something wrong in the tutorial when in reality they have clicked the wrong thing etc.
Either way, end result: dead device.
Rooting is not aimed at the novice. It is aimed at the advanced user.
Thank you
I understand that and appreciate the explanation. I can work my laptop and I know that my laptop is 32bit or 64bit but it did not say at any point that it was referring to my computer. It just said download the 32 or 64 bit version. Well I have to make sure what they are talking about before I go and try to root my device as I like clarification on everything I do so that I get it right (and don't brick it). At the moment the explanations are all over the place, some info here, another bit there and was hoping somebody could link it all for me and make sense of the order in which I would do things. I have installed graphic cards in my laptop, put custom firmware on to ipods, psp's, computer etc but this is my first foray into android territory and would like to get it right. I am trying to follow a video tutorial but my computer's reaction to driver updates for the ADB/Fastboot drivers is telling me my drivers are up to date and I'm not getting the error message his is. This means I'm not sure where to go as the situation is diffferent s He is trying to get motochopper working for shield so it will root the device and hoped it would do the same for me.
Hopefully some clarification will come sooner rather than later but won't venture fourth until I'm absolutely sure of what needs to be done.
Again, thanks for the help it is appreciated.:laugh:
Sorry for being so abrupt, it wasn't my intension, you are trying to learn. I will not give a step by step which I feel would be the best, yet potentially more dangerous option for you though.
The parts written in the "code" blocks are what you copy and paste into the command line. When I say navigate I mean by changing directory via command line. You can copy files with a graphical file manager as it's quicker but navigate could also mean graphically.
Google search how to tell if you are running 32 or 64 bit windows, there are better guides and videos than I would be able to describe in a few lines. I was assuming you had already unlocked your bootloader as it is required before root, I covered it as point of reference only.
Platform tools is a folder in the SDK, if you install the SDK you will see that folder where you install it.
Fastboot is the utility also in the SDK that you run from command line that's in the code blocks I posted. If you run the command it will either give a result saying a device is detected or it won't show anything (no result) and you have an issue. If you have a driver issue then that's a whole other problem with a specific forum topic for, but I also assumed you unlocked your bootloader which would require you have fastboot and driver issue resolved.
Main cause of my snappiness is it says the requirement (first line of what you quoted) is unlocked bootloader and you are asking questions about rooting (step two after unlocking bootloader) didn't realize you were stuck in step 0, trying to figure out where to start.
gogul1 said:
I understand that and appreciate the explanation. I can work my laptop and I know that my laptop is 32bit or 64bit but it did not say at any point that it was referring to my computer. It just said download the 32 or 64 bit version. Well I have to make sure what they are talking about before I go and try to root my device as I like clarification on everything I do so that I get it right (and don't brick it). At the moment the explanations are all over the place, some info here, another bit there and was hoping somebody could link it all for me and make sense of the order in which I would do things. I have installed graphic cards in my laptop, put custom firmware on to ipods, psp's, computer etc but this is my first foray into android territory and would like to get it right. I am trying to follow a video tutorial but my computer's reaction to driver updates for the ADB/Fastboot drivers is telling me my drivers are up to date and I'm not getting the error message his is. This means I'm not sure where to go as the situation is diffferent s He is trying to get motochopper working for shield so it will root the device and hoped it would do the same for me.
Hopefully some clarification will come sooner rather than later but won't venture fourth until I'm absolutely sure of what needs to be done.
Again, thanks for the help it is appreciated.:laugh:
Click to expand...
Click to collapse
Download 64 bit software for 64 bit windows and 32 bit on 32 bit windows. Only notable exceptions are where a guide explicitly says to get 32 bit for some particular reason (in my case the only time I have come across this is MSI afterburners screen recording facilities only functioning on a 32 bit program for some reason, no 64 bit version) or if you are running 32 bit windows and physically cannot run 64 bit software even though a guide says "use 64 bit java etc etc".
rather interested in installing a graphics card in a laptop seeming as laptops use graphics cards that are soldered down to the motherboard not on a seperate removable card in all with very few (but existant) exceptions.... I think asus, dell and someone else did offer them at one point, its actually what the MXM connector was invented for (but its used for a few other things now instead).
Anyway. Its always good to have clarification. I think the post above me gives a few starting points and as always: google is your friend (so are bing and yahoo, but they are those friends where once you leave your job or school or whatever you probably wont ever see again).
boot achieved
I boot loaded the Shield through dab and boot loader.
Shield restarted once I chose to unlock the shield. I lost all my stuff (as expected) and it restarted. The drivers then reinstalled on my laptop.
I restarted my laptop and the shield again and tried to reinstall the drivers that were made for the ADB but sadly I get this message now...
"Windows has determined that your driver software is up to date MTP USB DEVICE"
So I restarted everything and the device is now showing up in the Andriod Device driver list.
I am using minimal adb and Fastboot application. It opens the command menu
I type in
adb reboot bootloader and I get the reply "error:device not found"
any ideas?
Sigh!
gogul1 said:
I boot loaded the Shield through dab and boot loader.
Shield restarted once I chose to unlock the shield. I lost all my stuff (as expected) and it restarted. The drivers then reinstalled on my laptop.
I restarted my laptop and the shield again and tried to reinstall the drivers that were made for the ADB but sadly I get this message now...
"Windows has determined that your driver software is up to date MTP USB DEVICE"
So the shield is now showing up in my computer manager under Portable Devices and not under the Android Devices like it did when I installed the custom drivers the first time.
Will this be an issue when I come to root?
Sigh!
Click to expand...
Click to collapse
the MTP driver is for plugging the shield in and viewing the file system. If the device isn't under android devices in device manager then you may need to reinstall the ADB drivers or just double check that the ADB can see the device (it may).
Open a command prompt. type "cd [path to the android sdk]\platform-tools"
Then type "adb devices".
It should list all the android devices it can make a debug connection to. If the Shield is in that list your good, otherwise don't proceed any further until you can rectify that.
The other solution is that you dont need ADB drivers on a linux system for some reason. Don't ask why. I havent a clue. But that would necessitate installing linux.
And something that is useful for finding the adb on the command line again in future for windows. You don't want to "cd" into the correct folder every time (the command line equivalent of opening folders). Sometimes you just want to be able to open the command prompt, type "adb devices" and it to just work. That's doable by altering your system PATH variable.
Open my computer. Right click > Properties, should open the System window.
Left side there should be a button saying "Advanced system settings".
It will open the "System Properties" window to the "Advanced" tab (if it isnt on that tab just switch).
Bottom of the window should be a button saying "Environment Variables...". Click it.
Now the window that appears will be split in 2. User variables and System variables. There is a PATH entry in both, it is best that you only change 1. If you are the only user or you only want your user to be able to access the adb, you can change the User variable. Otherwise you can change the system variable for the adb to work on all users. For me I had to add python to my path once but I wanted to do this for all users so I changed the system one, the PSP SDK I installed however altered the User variable by default. Make your choice and find the variable "PATH" in either one.
Click Edit. A window will appear with Variable name and Variable Value. At this point what I recommend doing is copying the entire contents of value into a notepad file and saving them as a backup. Then cancel and go back into it.
Code:
C:\Program Files (x86)\Intel\iCLS Client\;C:\Program Files\Intel\iCLS Client\;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Windows Live\Shared;C:\Program Files (x86)\Intel\OpenCL SDK\2.0\bin\x86;C:\Program Files (x86)\Intel\OpenCL SDK\2.0\bin\x64;C:\Program Files\Intel\Intel(R) Management Engine Components\DAL;C:\Program Files\Intel\Intel(R) Management Engine Components\IPT;C:\Program Files (x86)\Intel\Intel(R) Management Engine Components\DAL;C:\Program Files (x86)\Intel\Intel(R) Management Engine Components\IPT;C:\Program Files (x86)\Lua\5.1;C:\Program Files (x86)\Lua\5.1\clibs;C:\Python27;c:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\Tools\Binn\;c:\Program Files\Microsoft SQL Server\100\DTS\Binn\
That is my Path variable.If you look the path variable is mostly a series of filepaths (or other variables too) which are seperated with ";". When you type a command such as "adb" into a command prompt what windows does is searches the current command prompt directory for a file it can execute which is called "adb" (it ignores extensions unless explicitly given one), if it doesnt find it in the current directory it searches each folder in the system path variable for the same executable (it ignores sub directories, it will only search the folders above on my system). So if we want to be able to type adb from any folder, we need the folder the adb is in to be added to the system path variable.
Simply add this to the end of it
Code:
;[whatever the path to the adb folder on your system is]
It will be whatever you had to add after "cd" to get to the adb earlier (must not leave out the C:\Users etc etc if its stored in your documents, cd will let you get away with ignoring that, the variable requires the FULL filepath).
Save the variable. Open a command prompt. Type adb, should work. If not, QUICKLY RESTORE THE BACKUP BEFORE WORKING OUT WHAT WENT WRONG. Should be safe with the broken variable to be fair, but you don't want to risk anything. If you dont think your going to use the adb often then simply dont bother updating the path variable rather than taking the (minimal) risk.
Wow my path variable is beginning to get a bit long now I only manually added python and lua to it. The rest will be the default entries and the SQL server stuff appears to be from installing visual studio. Yours probably wont match.
hehe you're going to hit me in a minute...
message deleted as I was being a moron....
ok I should be entirely clear as you guys are trying to help
ok I should be entirely clear as you guys are trying to help me so it's best i let you know what I have done up until this point.
Ok so I boot loader my shield.
I downloaded minimal ADB and Fastboot. I also downloaded the drivers you recommended in the forum.
I installed the drivers:
My shield showed up in the computer Manage list as a Portable device.
I chose to install the new drivers, it asked if I still wanted to go ahead as the drivers could not be verified and I said yes.
The drivers installed and the Shield changed from being in the portable list to showing up as an Android device.
Success I believe.
I then opened ADB BOOTLOADER and booted my Shield Manually.
I then typed in the relevant prompts in the command and a list of options showed up on the shield.
It showed my device number in the command prompt which was the one on my shield screen.
I then command the unlock function and the shield offered me the option to lock or unlock.
I chose Unlock and it then rebooted.
When it restarted, my computer reinstalled the device drivers and my shield had reset to factory settings (as it should).
I then looked in the Computer Manage list and my Shield had reverted back to being in the Portable Devices list.
I restarted both again and the Shield then showed up under Android Devices like it did when I installed the custom drivers the first time.
But the name of the device is Nvidia Shield - not Nvidia Shield ADB like in the tutorial video... not sure it that helps.
I enabled USB Debugging,
put the Superuser.apk and Su bin file into the minimal AADB and Bootloader folder.
I then put the Thor-insecure-boot.img in the Minimal ADB and Bootloader folder too.
I started up the command prompt from the minimal ADB and Bootloader.
I then saw this
C:\Program files <X86>\Minimal ADB and Fastboot>
I then typed in adb reboot boot loader and pressed enter
I got
error: device not found
So I decided to take the above advice and opened a command prompt
I typed in cd C:\tools\adt-bundle-windows-x86_64-20130729\sdk\platform-tools
and pressed enter:
It repeated what I typed and I then put in adb devices.
It then came back with:
List of Devices attached
but nothing was listed....
doh!
Progress!
Ok so I uninstalled my drivers to start again, plugged in the shield and it reinstalled my drivers and now under Android Devices it shows NVIDIA SHIELD ADB
Result!
Now I opened the dab cmd prompt
typed in
adb reboot fastboot
and it booted my shield! jolly good
But then I typed in
fastboot boot thor-insecure-boot.img
I then had
<waiting for device>
show up in the command window.
This is where it stayed.
On the screen of my shield I have options:
continue
restart bootloader
recovery mode
poweroff
Do I have to choose one of these in order for it to begin the thor img command?
C:\tools\adt-bundle-windows-x86_64-20130729\sdk\platform-tools Just incase you didnt get it earlier. That would be the path required for the variable change above. Just whack a ; on the end of the existing variable and throw that new path on the end and done.
But yes, adb devices not listing shield is not a good thing. Try reinstalling the ADB driver for the shield manually (you cant do it via device manager etc).
cool
I'm past that and now <waiting for device> problem to rectify. Am looking online now but there isn't much on there so far...
looking under device manager it shows up under Android Device as Nvidia Shield ADB but it also shows up under portable devices as SHIELD.
Whilst in boot mode the device only shows up in portable devices with a exclamation mark next to the device.
*UPDATE*
I uninstalled the portable device driver because I think it may have been causing confusion.
I then typed adb devices into CMD and a list of devices showed the serial number of the nvidia Shield.
I then typed in adb reboot bootloader in and it booted.
I then tried adb devices again and nothing showed up.
When I go into bootloader The Android Device: Nvidia Shield ADB driver disappears in manager once I go into bootloader mode. Is this normal?
Hmmmmmmm
definetly something to do with the drivers.
I'm on windows 7 64bit by the way.
Going back into device manager I noticed that there is another device under Other devices, upon looking at it it is Fastboot and has an exclamation mark in a yellow triangle next to it (Minimal dab and fast boot is open though).
Such a bummer as I'm so close yet so far
picture
ok so here is a pic of my devices list fastboot is there
before boot
This is the devices it can see before I put the shield in boot mode
devices seen after shielf in boot mode
the are the devices seen after I put the Shield in boot mode. It can't see any devices
waiting for devices
This is the screen on the shield in boot mode. The CMD screen says "Waiting for Devices"
MTK ADB gets you a privileged shell at the push of a button, allowing you to run commands directly on your MediaTek device. Some might wonder if rooting hasn't already solved this. Firstly, root access is persisted by modifying system files. When the real binary gets substituted by that of the root app's, if the device is rebooted, the init daemon running as root runs the binary giving the app root. What's wrong with this? If you have “purist” tendencies, you probably would want your phone as stock as possible, or at least with your permission. Sadly, not only binaries are dumped. Extra temp files, logs and helper binaries too, that manually removing them is like dancing on floor of pins and a prick means a brick. Not only that, consider yourself blocked from updates. If you're unfortunate enough, an update could result in bricking your phone as the files supposed to be present had been changed. This is more common than you think. MTK ADB makes no changes to your files whatsoever. Also, there's the matter of security/privacy. Root apps tend to always do something in the background. Either sneaking in a new app, or phoning home with your private data, or both. MTK ADB doesn't steal your data. The Internet permission is for Telnet, etc. On some devices, MTK ADB can get root access (depending on manufacturer) while all devices can get shell access. You just have to check which yours belongs.
IMPORTANT
•Refresh before (and after) clicking Start to check ADB status.
•Supports all ADB functionality. Just run "adb <command>" eg "adb pull" (without quotes).
•The minimalist terminal is for those who haven't any. Feel free to use your regular terminal (I use Terminal IDE) and keyboard (Hacker's Keyboard is really good). Just run "adb shell" on it.
•You can connect to your device using another phone, PC, or anything with a terminal and in the same network by running "adb connect IP_address".
•If you get a " device offline" error, disable and enable USB debugging. Next time connect to the network before running the app.
http://www.youtube.com/watch?v=_bt8BVaDCf0
http://slaycode.WordPress.com
Bump
Proof:
http://forum.xda-developers.com/gen...iled-error-t3191150/post62611445#post62611445
More Proof:
http://forum.xda-developers.com/fire-phone/general/root-fire-phone-supersu-t3105546/page10
Proof:
http://forum.xda-developers.com/gen...iled-error-t3191150/post62611445#post62611445
More Proof:
http://forum.xda-developers.com/fire-phone/general/root-fire-phone-supersu-t3105546/page10
When I open the app it opens but it doesn't work when I enter the commands and moreover the app when I try to start the adb it says unsupported device
Am using infinix hot 4 pro running NOUGAT xos 2.2
LordFME said:
MTK ADB gets you a privileged shell at the push of a button, allowing you to run commands directly on your MediaTek device. Some might wonder if rooting hasn't already solved this. Firstly, root access is persisted by modifying system files. When the real binary gets substituted by that of the root app's, if the device is rebooted, the init daemon running as root runs the binary giving the app root. What's wrong with this? If you have “purist” tendencies, you probably would want your phone as stock as possible, or at least with your permission. Sadly, not only binaries are dumped. Extra temp files, logs and helper binaries too, that manually removing them is like dancing on floor of pins and a prick means a brick. Not only that, consider yourself blocked from updates. If you're unfortunate enough, an update could result in bricking your phone as the files supposed to be present had been changed. This is more common than you think. MTK ADB makes no changes to your files whatsoever. Also, there's the matter of security/privacy. Root apps tend to always do something in the background. Either sneaking in a new app, or phoning home with your private data, or both. MTK ADB doesn't steal your data. The Internet permission is for Telnet, etc. On some devices, MTK ADB can get root access (depending on manufacturer) while all devices can get shell access. You just have to check which yours belongs.
IMPORTANT
•Refresh before (and after) clicking Start to check ADB status.
•Supports all ADB functionality. Just run "adb <command>" eg "adb pull" (without quotes).
•The minimalist terminal is for those who haven't any. Feel free to use your regular terminal (I use Terminal IDE) and keyboard (Hacker's Keyboard is really good). Just run "adb shell" on it.
•You can connect to your device using another phone, PC, or anything with a terminal and in the same network by running "adb connect IP_address".
•If you get a " device offline" error, disable and enable USB debugging. Next time connect to the network before running the app.
http://slaycode.WordPress.com
Click to expand...
Click to collapse
Are you familiar with an APK that utilizes mtk_bypass to directly flash firmware to device.
I'm looking for an APK that basically does what sp flash tool does because I don't have a computer.
Hi, I've got an old S5 with a broken screen. There's no image going on and there's no indication that the touchscreen is working.
I'm not looking to recover data, I'm looking to play around with it by controlling it from my PC. Last I remember, the phone is running a Cyanogenmod OS (I don't think LineageOS was around at that time) with either TWRP or CWM recovery, but I'd bet on TWRP.
Now: the device reaches the OS properly, I can tell because if I try to turn the ringing sound up it gives me an audio feedback.
If I connect it to a PC from the OS:
- the phone shows up in Windows Explorer as "SM-G900F"
- Device Manager shows me a "SAMSUNG Mobile USB Composite Device" under Universal Serial Bus controllers
However I cannot access any files (Windows Explorer shows the device as empty), and if I attempt to 'adb devices' in the console it shows me an empty devices list.
Now, I suspect that USB debugging might be off. So I also tried connecting it to a PC from recovery and the exact same thing as above can be observed, PLUS:
- Device manager also shows me a "SAMSUNG Android Phone" list which can be expanded to show me one entry called "SAMSUNG Android ADB Interface"
However it's the same as before, no files available and 'adb devices' shows an empty list.
Now I heard that I can theoretically enable USB debugging through ADB, by writing to a config file. That would allow me to enable USB debugging and try something like Vysor in order to control the phone from my PC.
However that's a moot point until I can figure out why the ADB service on my PC isn't seeing the device. Any help would be greatly appreciated, and if you need more info I can provide it.
Extra info:
- I installed Samsung USB drivers at some point while trying to make it work
- Windows Explorer shows a phone icon for this device, and if I recall correctly that's what happens when it's connected through MTP (Mass Storage should show it like a memory card)
_sepiroth said:
Hi, I've got an old S5 with a broken screen..........
Click to expand...
Click to collapse
I've never experienced this situation myself but, I've seen that the following thread has worked for many individuals.
https://forum.xda-developers.com/showthread.php?t=2786395
Good Luck!
~~~~~~~~~~~~~~~
Unless asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my Apple Macintosh.
Ibuprophen said:
I've never experienced this situation myself but, I've seen that the following thread has worked for many individuals.
https://forum.xda-developers.com/showthread.php?t=2786395
Good Luck!
~~~~~~~~~~~~~~~
Unless asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my Apple Macintosh.
Click to expand...
Click to collapse
Thanks a bunch, that pointed me in the right direction with my research! I solved my issue, I can now control my phone from my PC.
By doing this I ran into a couple of problems, I'm going to describe them and their solutions:
Problem 1: couldn't ADB into the device when in Recovery Mode. That is because after a long head scratching session I came to the conclusion that I didn't have TWRP Recovery installed (I had Philz Touch CWM Recovery and LineageOS 14.1 instead).
Solution 1: ADB mode is enabled in TWRP by default. So I flashed the latest TWRP through Odin, ADB instantly started working afterwards in Recovery Mode.
Problem 2: USB Debugging was disabled inside the OS.
Solution 2: from the thread that Ibuprophen posted, you can enable USB debugging in your OS by opening an ADB shell into your device and modify the build.prop like so
Code:
Adb shell
echo "persist.service.adb.enable=1" >>/system/build.prop
echo "persist.service.debuggable=1" >>/system/build.prop
echo "persist.sys.usb.config=mass_storage,adb" >>/system/build.prop
reboot
Problem 3: /system was empty so there was no build.prop. If I attempted to create a build.prop file it wouldn't be saved after a device reboot, so USB debugging still didn't work.
Solution 3: it seems like TWRP doesn't mount /system by default, only /data. You can mount it manually through ADB like this:
Code:
mount -o rw /dev/block/bootdevice/by-name/system /system
I found this out from this stackexchange question: https://android.stackexchange.com/q...data-partitions-in-recovery-mode-in-adb-shell
Problem 4: When an app tries to use USB Debugging you need to allow it to do so from the phone. Since the screen was broken, I couldn't do this.
Solution 4: You'll need to push a public key to your device with ADB. Boot into Recovery Mode and make sure your device is recognized by your PC and type
Code:
adb push <path to adbkey.pub on your PC> /data/misc/adb/adb_keys
This solution is from: https://stackoverflow.com/questions...b-rsa-key-with-broken-touch-screen-on-android
This will make sure that you won't need to confirm debugging permissions for apps coming from your machine.
So for anyone who has a broken phone screen (my screen is dead and touchscreen/touch buttons are kaput too) and wishes to control their phone from their PC but USB debugging is disabled:
1. Boot device in TWRP Recovery (flash it if you don't have it)
2. ADB into the device
3. Make sure /system is mounted (if it's empty it means it's not mounted), else mount it manually like in Solution 3
4. Configure build.prop to have USB Debugging enabled like in Solution 2
5. Push your public key to the device like in Solution 4
6. Restart the phone (into its OS)
7. Download the Chrome extension called Vysor and launch it
8. Connect your phone through a USB cable
9. The device should appear in Vysor, connect to it and have fun controlling it
Note that if you just want to backup your files, steps 1 + 2 are sufficient. After making sure ADB works you can just 'adb pull' all your files which should be located in /sdcard. Google it, it's easy to find.
The same goes for backups, you can do them directly through ADB.
Again, thanks Ibuprophen!
Vysor does not work on all graphic cards. a good free alternative is scrcpy
btw instead of flashing twrp, you can flash a modified system partition with proper entries in build.prop (for those with no custom recovery available)
aIecxs said:
Vysor does not work on all graphic cards. a good free alternative is scrcpy
btw instead of flashing twrp, you can flash a modified system partition with proper entries in build.prop (for those with no custom recovery available)
Click to expand...
Click to collapse
Very well pointed out, thanks for this.
Hey guys. I have a Rockchip RK3288 based device running Lollipop 5.1.1 that I would like ADB access to. I have tried all 3 USB modes, and it shows up on my PC each time, but neither "adb devices" nor "fastboot devices" ever shows it. I know, you're thinking "Have you enabled USB debugging?". No I haven't, and there's a reason. "7 taps" doesn't DO anything. I've also tried 10, 20, and 100. None of them seem to do anything. (There aren't any administrators, or other users defined either). Normally, the first step would be to root it. I've tried that as well. Towel root, Kingo Root, etc. Kingo makes it to 90%, and reboots. (Leaving it not rooted). Towel root just seems to hang. (Left it running overnight to make sure. No dice). I've also tried an APK from GitHub that just changes the Developer Mode flags. That just gets denied execution.
Twists:
* The device came with ES File Manager installed, and it's old enough that the HTTP exploit is still there.
* I can install third party APKs. (Obviously).
* I can't build/install/reflash a new ROM as the device has to stay like it is.
* USB Mass storage class works, so I can copy TO/FROM it very easily
* Device has no volume up/down buttons to use to get to recovery.
I just need root/ADB access.
What approaches have I missed?
Root Genius (RootGenius-v2.2.89.apk) also didn't work. I only took 1 semester of Mandarin, so I have to mostly GUESS, but it LOOKS like it was saying that I need to go to a website (that is no longer up), and download a PC app to do the rooting. (Which would be hard to do since the site is no longer up).