Database Info

Charging issues

Hello guys,
I bought my Moto G (Indian, Dual Sim with Kitkat out-of-the-box) couple of days back.
So here are few issues:
1) While I connected it to wall charger, there's no charging animation showed even though its charging. Is it like that with everyone?
2) It doesn't get charged while I connect it through USB to my Windows 7 PC. Normal?
3) It gets connected only as MTP. No Mass Storage Device option in the USB Connection. And it doesn't let me copy folders. Only individual files. Anyone else?
Thanks for your replies.

1) There is no charging animation but only a flashing sign over battery.
2) Connecting via usb to pc charges the phone same as wall charger but also offers option such as mtp and stuffs..
3) No usb mass storage option instead mtp is activated by default. Yes i can transfer folders too.
Sent from my XT1033 using xda app-developers app

OPO no USB functionality

I've had my OPO for a little over 7 months now. My issue began when I had my desktop at a friend's house and plugged my phone into a USB 3.0 port to grab some videos off the phone when the phone suddenly shut off and would not turn back on. I thought it was bricked somehow but after leaving it plugged into a USB 2.0 port for some time, the charging screen came on and I was able to turn the phone on, but since then both OTG and MTP/PTP transfer doesn't work. If/when the phone is plugged into a computer, it gives an error and Device Manager shows
"Port_#0001.Hub_#0004 Unknown USB Device (Port Reset Failed)" and I'm not only able to charge the phone with one out the dozens of micro usb cables I have. I've tried several cables and a handful of different computers and OSs (Windows 7,8,8.1,10, Ubuntu 15.04, Kali Linux) all to the same result.
I'm running COS 12.1-YOG4PAS3JL, rooted, and have TWRP installed. The phone doesn't show up when in Fastboot mode or the bootloader either. Nothing changes when I disable or enable USB Debugging as well. With DriveDroid if I set the USB system to "Standard Android" the phone reboots and that seems like the closest I've been able to get to any kind of progress. I've gone through unbricking threads as well as Googled until my fingers bled but I'm yet to find anyone with a similar situation where the phone isn't bricked, the micro usb port isn't broken, I can't pick between MTP or PTP mode (USB Connection just says USB is now disconnected), and I'm not running a custom ROM. I tried replacing the micro usb on the phone so I now know that it wasn't that that's been messed up but I'm not sure where to go from here. Any suggestions or help is greatly appreciated.

USB OTG only reverse charging possible

Hello All,
I stumbled upon a problem with my Mate 30 pro. When using a USB stick and or USB card reader I can only select "use USB to reverse charge". When selecting the other options like transfer photos or transfer files the selection jumps after 2 sec back to reverse charge.
I use File manager to transfer pictures from my phone to my computer via a stick and due to this it fails to do this, well it fails to transfer pictures from my phone to my USB stick, from the stick to the phone works...
Using the internal file manager then it works...uninstalled file manager rebooted the phone and reinstalled did not solved my problem. I prefer to work with the file manager from play store and not the internal one...
Google play store is on the latest version, well the same version like on my mate 20 pro.

Just realized that my mate 20 pro is doing exact the same, but there transfer files/pictures from phone to USB stick works.

Have u tried developer options - USB debugging?

viruz1225 said:
Have u tried developer options - USB debugging?
Click to expand...
Click to collapse
Yes I did, also tried to change the same setting - USB config - in the developer options but there it also reverts back to charge only.

I see the exact same automatic return to "Reverse charge" after 2 seconds using OTG, but I can use the internal file manager, so I am not
bothered so much by that. What bothers me is that I want to charge normally (opposite of "Reverse Charge") using OTG since I am using
"Accessory Charging Adaptors" (i.e., I am using an OTG USB Hubs with a power supply included). After many experiments, I see no way to
simultaneously charge my Mate 30 Pro and use an OTG device - Has anyone found a way to do this?

If ACA doesn't work, then chances are that your USB controller driver doesn't have it implemented
[KERNEL] (Patch) USB OTG (host mode) + simultaneous charging!
(I really struggled with where to post this. Although much work and effort went into debugging unique Z5-specific issues, this is based on prior work so I put it here instead of in "original"; also, I would be very surprised if this didn't apply...
forum.xda-developers.com

Can't connect to Windows 10 PC?

For some reason I can't connect my Pixel 4a to my PC with a USB C - USB A cable (or USB A - USB C, not sure what the official name is) , even though it worked fine on my previous phone.
Included with the phone is a USB C - USB A adapter, but I see no use for it unless you have a special USB A cable which I don't.
My motherboard does have a USB C slot on it and it does read my phone when I plug it in that way but for some weird reason it's really loose and doesn't stay connected unless I keep physical pressure on it.
I'm not going to update to Android 11 until the November update because I've heard the current build has a few bugs, but does anyone know if Android 11 fixed the USB C - USB A issue?

Have you made sure to switch to file transfer mode? It defaults to 'no transfer' mode when I plug into my laptop.

Most likely you need to toggle the phone connection settings to data transfer, originally it will be set to charge only I think.

WAusJackBauer said:
For some reason I can't connect my Pixel 4a to my PC with a USB C - USB A cable (or USB A - USB C, not sure what the official name is) , even though it worked fine on my previous phone.
Included with the phone is a USB C - USB A adapter, but I see no use for it unless you have a special USB A cable which I don't.
My motherboard does have a USB C slot on it and it does read my phone when I plug it in that way but for some weird reason it's really loose and doesn't stay connected unless I keep physical pressure on it.
I'm not going to update to Android 11 until the November update because I've heard the current build has a few bugs, but does anyone know if Android 11 fixed the USB C - USB A issue?
Click to expand...
Click to collapse
I had this issue too. Windows file explorer would just crash after one or two files and stop transfer, no matter the size and type. (Yes I had file transfer selected on my phone ?)
Then windows update gave me a driver called "Google Inc. - Other Hardware - Kedacom KDB Composite Interface". I also updated to the newest firmware on the phone. No idea which of these did the trick or if it was the combo. However. Smooth sailing now ??
Hope this helps
(If windows update refuses to give you the driver, you can get it from Microsoft's update catalogue online. A Google search will do)

Ok it's completely messed up. When I search for USB settings it doesn't let me change anything at all, even though when I first got the phone I could and I changed it to transfer files. EDIT: No actually the setting that I changed was a developer option called "Default USB configuration" which I changed to transfer files but that still did nothing.
I just plugged in my phone and looked for the USB setting in the notification area but it wasn't there, but I noticed an option called "manage"
I went in there and noticed this. (see attachments) it's locked to be off and I can't change it. Very odd.

WAusJackBauer said:
Ok it's completely messed up. When I search for USB settings it doesn't let me change anything at all, even though when I first got the phone I could and I changed it to transfer files. EDIT: No actually the setting that I changed was a developer option called "Default USB configuration" which I changed to transfer files but that still did nothing.
I just plugged in my phone and looked for the USB setting in the notification area but it wasn't there, but I noticed an option called "manage"
I went in there and noticed this. (see attachments) it's locked to be off and I can't change it. Very odd.
Click to expand...
Click to collapse
You're in notification settings. Try short tapping rather than long tapping to get the menu to pop up allowing you to select data transfer.
Changing default USB settings in developer options doesn't work for me either.

GoldElocks said:
You're in notification settings. Try short tapping rather than long tapping to get the menu to pop up allowing you to select data transfer.
Changing default USB settings in developer options doesn't work for me either.
Click to expand...
Click to collapse
My point is that the notification that normally comes up when you plug in your phone to a computer to change to data transfer, charge only ect ect isn't even coming up because the firmware is stopping that notification from coming up altogether and I can't change it so it does.

WAusJackBauer said:
My point is that the notification that normally comes up when you plug in your phone to a computer to change to data transfer, charge only ect ect isn't even coming up because the firmware is stopping that notification from coming up altogether and I can't change it so it does.
Click to expand...
Click to collapse
Almost certainly a cable or host port issue. Swap cables and see what happens. Same for hosts/host ports. You're not going to have toggling options if the phone does not 'see' all expected lines/pins.

I had the same issue and changed to a different cord to fix the problem.

You have an non certified cable it seems, I've confirmed this pixel 4a works with only certain cables for usb transfer, also the usb a to c cable you have will not charge the device as well.
Get a cable from know manufacturers like Samsung, it worked for me.

Yeah turns out it was a cable. Strange how my cable worked with my old phone but not with the Pixel 4a

Had this issue with my new 4a just now. Cable was fine, even used the new cable that comes with it using a Usb C to Usb A adapter. Nothing worked. Upon opening Device Manager I found a new device called 'Kedacom USB Device'. After trying random things, I decided to uninstall the current drivers by right clicking on it and clicking 'Uninstall device'. Suddenly the phone connected, and even showed the adb prompt.
So for anyone still facing this issue, hopefully this solution might help

Can't get usb debugging working

Phone is rooted and on android 10 and xxxnolimits installed
I connected phone to pc and only charging. Tried 3 different cables, including official one and 3 different USB ports and not showing on pc. I can hear noise it's connected to pc but then another noise to disconnect
Usb debugging is enabled and default usb configuration I can change to file transfer, usb tethering , midi, ptp & no data transfer. I changed it to each of them still not showing
There is no option to choose mtb from drop down notification no notification is there
I rebooted phone and pc and cleared cache. Also i app settings allowed notifications.
I'm at the end of my tether trying to figure out what issue is as was working previously.
Now all its doing is charging
Any suggestions

funkyirishman said:
Phone is rooted and on android 10 and xxxnolimits installed
I connected phone to pc and only charging. Tried 3 different cables, including official one and 3 different USB ports and not showing on pc. I can hear noise it's connected to pc but then another noise to disconnect
Usb debugging is enabled and default usb configuration I can change to file transfer, usb tethering , midi, ptp & no data transfer. I changed it to each of them still not showing
There is no option to choose mtb from drop down notification no notification is there
I rebooted phone and pc and cleared cache. Also i app settings allowed notifications.
I'm at the end of my tether trying to figure out what issue is as was working previously.
Now all its doing is charging
Any suggestions
Click to expand...
Click to collapse
Do you have the latest fastboot-adb platform tools installed? Just a thought.

Will check
However usb notification drop down not coming up on phone to change settings when I plug phone into port.
Also plugged phone into USB port of car for android auto and not picking it up

If I restore a backup would that be worth trying or does issue seems to be with usb port on phone?

funkyirishman said:
If I restore a backup would that be worth trying or does issue seems to be with usb port on phone?
Click to expand...
Click to collapse
Try uninstalling and reinstalling usb google drivers on your pc ( or your appropriate driver's for your phone).
Install OEM USB drivers | Android Studio | Android Developers
Discover links to the web sites for several original equipment manufacturers (OEMs), where you can download the appropriate USB driver for your device.
developer.android.com

Are you talking about usb drivers?
I installed this one
OnePlus USB Drivers | Official
Download the latest version of OnePlus USB Driver for your OnePlus smartphone. OnePlus USB Drivers helps your OnePlus smartphone to communicate properly with your computer.
oneplususbdrivers.com
Still not working
Phone not showing up in device manager

Also tried the below and phone just keeps on rebooting
in Developer option > USB debugging ON
turn off phone
connect cable
turn ON phone
Still looking for a solution

Tried cable on old one plus 5 and it's working fine on pc
So must be phone
Any suggestions on what to try