Johello, I speak Spanish so I will use a translator , I hope I understand .
I have a motorola g3 but I have no original accessories, yesterday connect my phone to pc and I realized that only load does not detect USB connection , restart the phone factory but also activate usb debugging.
in my pc and install the drivers from motorola and have 2 operating systems windows 7 and 8.1 and is not detected it has marshmallow 6.0 what I'm thinking maybe a USB cable motorola needed, since the 2 that I use one is from alcatel and another mobo . Could anyone help me?
MaaikyStymest said:
Johello, I speak Spanish so I will use a translator , I hope I understand .
I have a motorola g3 but I have no original accessories, yesterday connect my phone to pc and I realized that only load does not detect USB connection , restart the phone factory but also activate usb debugging.
in my pc and install the drivers from motorola and have 2 operating systems windows 7 and 8.1 and is not detected it has marshmallow 6.0 what I'm thinking maybe a USB cable motorola needed, since the 2 that I use one is from alcatel and another mobo . Could anyone help me?
Click to expand...
Click to collapse
Try to install this : https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481 ( This will install Motorola Drivers to PC)
Use a Data cable, that has ability to Charge your MotoG, Others data cables which cannot charge your phone can be useless in sometimes..
no need of keeping USB DEBUGGING - ON
if your phone does not connect .. Do one thing, Install Mobogenie, and Do as it says..
http://www.mobogenie.com/in/product/mobogenie-pc.html
This might help ,
check these , in your phone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
as I said earlier ... and I have motorola drivers installed on my 2 computers ... I just installed mobogenie not work
1 pc the option is enabled, the other 2 is a cable that is connected to the PC and load only it says that there is no connection as shown and the other does not show me any notification.
MaaikyStymest said:
as I said earlier ... and I have motorola drivers installed on my 2 computers ... I just installed mobogenie not work
1 pc the option is enabled, the other 2 is a cable that is connected to the PC and load only it says that there is no connection as shown and the other does not show me any notification.
Click to expand...
Click to collapse
Try this:
When connected the phone with pc, Goto
Settings > Developer Options > Networking > Select USB Configration
Select MTP (Media Transfer Protocol)
Done
Related
I updated to jelly bean and now i turned on usb debugging and when i connect my phone to pc it starts in mtp mode and i can't switch it to charge only which i think i should do to fix this problem but i can't do it (change to charge only)
this is what i see in the notification center:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and thats what i see when i tap the "USB Connected - Click to change settings" :
Please tell me how to disable mtp mode or switch to charge only cause adb can't see my device.
LSGio said:
I updated to jelly bean and now i turned on usb debugging and when i connect my phone to pc it starts in mtp mode and i can't switch it to charge only which i think i should do to fix this problem but i can't do it (change to charge only)
this is what i see in the notification center:
and thats what i see when i tap the "USB Connected - Click to change settings" :
Please tell me how to disable mtp mode or switch to charge only cause adb can't see my device.
Click to expand...
Click to collapse
You can no longer do switching to charge only!
Try unplugging your usb then replugging then reattempt adb type adb devices if the device serial No shows you have adb!
If that still does not work then update your usb drivers!
rustykwak said:
You can no longer do switching to charge only!
Try unplugging your usb then replugging then reattempt adb type adb devices if the device serial No shows you have adb!
If that still does not work then update your usb drivers!
Click to expand...
Click to collapse
fixed the problem by updating the sdk platform tools via android ask manager cause i didn't have the support packages for jelly bean
LSGio said:
fixed the problem by updating the sdk platform tools via android ask manager cause i didn't have the support packages for jelly bean
Click to expand...
Click to collapse
That'll do it! lol
Hey guys,
So I got my hands on a Note Pro collecting dust and wanted to update it.
I believe its originally a Russian device.
I have no sim card installed and OTA will not work (gets server errors)
The US 5.1.1 OTA update fails out and I noticed the CSC-code it is looking for is SER
Oh yeah, Odin won't detect the device. Keis is useless and the new Smart Switch doesn't help much either
I think I need a Russian version of the update. Can anyone point me in the right direction? I've been hunting all day and can't find much.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If your device is rooted ota will not work(use root checker on play store to confirm) therefore, we will use the odin way. The software being russian or not does not matter as we are using odin now...for odin to get the device to recognise is to do:
1: check connecting your device to your pc with different usb cable.
2:Try changing usb ports
3:Re-install samsung usb drivers
4: Reply and tell me if the operating system of your pc is windows 7 or not.
5:Go into developer mode (activate it by pressing the build number of your device in phone settings) then turn usb debugging option on..........Though not sure but may work!
6: Hit the thanks button!!
Osama chohan said:
If your device is rooted ota will not work(use root checker on play store to confirm) therefore, we will use the odin way. The software being russian or not does not matter as we are using odin now...for odin to get the device to recognise is to do:
1: check connecting your device to your pc with different usb cable.
2:Try changing usb ports
3:Re-install samsung usb drivers
4: Reply and tell me if the operating system of your pc is windows 7 or not.
5:Go into developer mode (activate it by pressing the build number of your device in phone settings) then turn usb debugging option on..........Though not sure but may work!
6: Hit the thanks button!!
Click to expand...
Click to collapse
The device is not rooted.
All stock and reset.
Tried different ports
Already reinstalled drivers.
Debugging mode is on
Odin doesn't recognize.
Using Win 7
For some reason, Odin saw it out of the blue. Never restarted my computer. Used the same port.
Got it updated
dragonash said:
The device is not rooted.
All stock and reset.
Tried different ports
Already reinstalled drivers.
Debugging mode is on
Odin doesn't recognize.
Using Win 7
For some reason, Odin saw it out of the blue. Never restarted my computer. Used the same port.
Got it updated
Click to expand...
Click to collapse
In case it happens again go to driver manager from control panel and see if the icon for the note pro has a caution sign if it does then you you should click the uninstall driver option and then right click anywhere and click the scan for hardware option. this has happened to me as well and I did this amd it recognizes my note pro instantly.check it out. Thank you for reading my post.
Hi,
I have installed the last LineageOS 18.1 (Android 11) on a SAMSUNG S4 Value Edition.
I got almost everything working, but the USB connection.
Settings-System-Advanced-Developer Options-Default USB Configuration = File Transfer
Now, if I go in System-Connected Devices and the USB cable is plugged in it should appear OTHER DEVICES - USB connection but it doesn't !!! It actually does appear but only very very rarely and randomly !!!
Please offer feedback, many thanks !
Regards
You set USB-mode to File Transfer ( AKA MTP ): File transfer will change your phone to USB mass storage, allowing you move files between the phone and the other device (such as your computer). To access phone in this USB-mode requires another driver.
Many thanks for the quick reply.
But that was the idea! I want to be able to access the S4 jfvelte internal memory (pictures, docs, etc) from a PC.
My expectation was that when I connect the phone to the PC (Win10) via USB cable I can access the phone from WinExplorer but this is NOT so... only very rarely the phone is shown in Explorer.
Contrariwise when I connect another (real) S4 with the official Android 5 I can always access the phone from the PC.
jwoegerbauer said:
To access phone in this USB-mode requires another driver.
Click to expand...
Click to collapse
Does it mean that one should update the jfvelte USB driver first ?
If YES how can I do this ?
Where can I find the right USB driver ?
On windows PC install the MTPdrive 4.1 app - a trial version - what is attached:
MTPdrive is intended to map devices to a drive letter. It works with all devices that operate in MTP (Media Transfer Protocol) mode.
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
jwoegerbauer said:
On windows PC install the MTPdrive 4.1 app
Click to expand...
Click to collapse
Done. However I cannot notice any change.
The phone is still not visible in Explorer.
If I start the MTPdrive.exe there is no device detected:
I have just installed the last UBS drivers from SAMSUNG (Samsung-USB-Driver-v1_7_43_0.zip) on the Win10 PC.
The Samsung S4 phone (jfvelte - Lineage 18.1) behaves in the same way, namely the phone is most of the time not accessible from the PC via the USB cable. This looks to be a LineageOS 18.1 jfvelte bug. Any idea if there is a way to talk with the LineageOS developers, eventually to report such an issue ?
Hi,
The topic is solved: it was because the phone screen was locked ! as soon as one connects the USB cable to the phone AFTER unlocking the phone screen it works as expected, meaning one can access the files/pictures etc which are being stored on the phone !!!
Many thanks for all !!!
Long story short, my older bro asked if I could fix his phone that crashed during the middle of a regular system update, and now what was suppose to be an easy recovery has brought me here to seek enlightenment, as I feel like I've just about exhausted all of the options I can at this point.
Some of the issues present
Hangs / Loops on Samsung Galaxy boot logo.
Sometimes when connecting USB displays water damage warning with consistent vibration in 2-3 second intervals until phone is restarted or powered bringing me back to issue #1 all over again.
Does not recall it being damaged by water in the past.
Phone not recognized by Windows - device manager displays (Error 43 : Unknown USB Device (Device Descriptor Request Failed) and the control panel device troubleshooter does not find any resolution to solve the issue.
Which leaves the device unable to be seen by ADB/Fastboot, unable to be seen by Odin to flash ROM, TWRP, Clockworkmod, also unable to disable FRP or encryption.
Some of the following things I've done / tried.
Installing several versions of the Samsung Android USB Drivers
Reinstall/Update/Uninstall all USB drivers
Automatically & manually updating driver in Device Manager
Running the troubleshooter via right clicking device in Control Panel
Erasing all traces of (broken) connected USB devices from the registry
Tried a different Windows PC
Tried three separate USB cables, all of which are OEM Samsung
Tried various USB 2.0, 3.0 and 3.1 ports
Placing the stock firmware renamed as "update.zip" in the root directory of SD Card then entering recovery mode and, mounting SD card, wiping cache / data, and selecting the option to Recover/Update from SD Card (phone restarts instantly and brings back to boot logo hang / loop).
Software I've used:
Samsung Android USB Driver (Lastest):
Samsung Android USB Driver | Samsung Developers
You need the driver only if you are developing on Windows and want to connect a Samsung Android device to your development environment over USB.
developer.samsung.com
Android SDK Platform-Tools for Windows:
SDK Platform Tools release notes | Android Studio | Android Developers
Android SDK Platform-Tools is a component for the Android SDK.
developer.android.com
(2021-01-01) SM-A530W A530WVLSFCTL1 Android 9 Stock ROM: https://www.sammobile.com/samsung/g.../SM-A530W/BMC/download/A530WVLSFCTL1/1208986/
Samsung Odin 3.14.1: https://odindownload.com/download/Odin3_v3.14.1.zip
USB Oblivion: https://sourceforge.net/projects/usboblivion/
Some pictures that may important:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm fairly confident that it is not an issue with the USB ports on the either PC, as my Samsung Galaxy A51 connects and is recognized just fine on both, which is leading me to believe it's either bricked to the point it unable to communicate properly by Plug n Play means, or the USB port on the phone could be damaged by means other than water.
Any help, suggestions, even some opinions please I beg of you before I end up in the nuthouse lol!
Try installing drivers from a separate source?
Update:
My phone was not recognized by the computer since the usb flex was broken, the data lines did not work, but the charging lines did.
Watch this video for a solution:
Hello!.
Can someone who understands the subject explain to me how the startup architecture of an android device works at the hardware/software level.
I recently completely lost control of my android device, after some problems flashing a corrupt rom. I don't understand if I deleted any important files or what happened, but my device is not detected by any computer, leaving me unable to use adb or any USB flash tool. I also don't know if this problem has to do with the usb card, since this, if it sends power, the device charges, and is detected by the computer as a generic usb.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hard brick / Device not found. Sony M4 Aqua E2303.
I installed a faulty ROM which caused my phone to not be detected by my computer (it shows up as an unknown device). I want to flash the original rom, but there is no way, because when I do it with the flashtool and it asks me to connect the...
forum.xda-developers.com
Gretings!
RenzoMag said:
Hello!.
Can someone who understands the subject explain to me how the startup architecture of an android device works at the hardware/software level.
I recently completely lost control of my android device, after some problems flashing a corrupt rom. I don't understand if I deleted any important files or what happened, but my device is not detected by any computer, leaving me unable to use adb or any USB flash tool. I also don't know if this problem has to do with the usb card, since this, if it sends power, the device charges, and is detected by the computer as a generic usb.
Hard brick / Device not found. Sony M4 Aqua E2303.
I installed a faulty ROM which caused my phone to not be detected by my computer (it shows up as an unknown device). I want to flash the original rom, but there is no way, because when I do it with the flashtool and it asks me to connect the...
forum.xda-developers.com
Gretings!
Click to expand...
Click to collapse
The "device descriptor request:failed) issue is more than likely not a problem with your device, it is more commonly a problem with your PC or your device drivers that are installed on your PC.
If you do a Google search for:
"Unknown USB device(device descriptor request: failed)"
It should find links to guides and videos with troubleshooting steps to solve this issue. Try the methods they describe, sometimes you have to repeat the solution several times before the issue is corrected.