Database Info

[Q] Installing original stock rom N8010: Fail

Hallo Forumianers and XDA-Freaks!
I've got a Samsung Galaxy Note 10.1 (GT-N8010 Wi-Fi only) and I got it two years ago with retail mode software on it. To get this retail s**t off, I flashed it with CWM and installed a custom rom with same functionality as the stock rom. I was happy with it until now. For some reasons I need to get original stock rom on it now (e.g. update capability by Samsung) and here my problem starts:
I downloaded N8010XXUCMA5 - Open Germany - JB 4.1.2 file, extracted the zip and flashed my N8010 with Odin 1.85 and the xxx.tar.md5 file. It worked perfectly until trying to write the boot.img data. At the very last second (actually 1 or 2 seconds before it should have been finished) the procedure failed with a red field in Odin and the word Failed in it.
Then I just tried to restart the device normal and I got the "DEAD-SCREEN" (An issue occurred while updating device... a.s.o.).
Frustrated from hours of work - I tried the same procedure three times with same result - and sleepy I decided to go back to a custom rom for now. So !! I flashed CWM on the N8010 by Odin and made a system restart.... !!!!! I couldn't believe: N8010XXUCMA5 rom started perfectly and works without any problems...
But my main problem stays: I can't use update functionality to update to newest Samsung version...
Does anybody have an idea on how to resolve this problem and just install original stock rom by Samsung? (e.g. resetting binary counter - not yet tried, etc....).
Do I have to do special procedure before installing N8010XXUCMA5 version???
Thank you all in advance for any help and/or ideas!!!
Best regards, Ingmar

AceLine100 said:
Hallo Forumianers and XDA-Freaks!
I've got a Samsung Galaxy Note 10.1 (GT-N8010 Wi-Fi only) and I got it two years ago with retail mode software on it. To get this retail s**t off, I flashed it with CWM and installed a custom rom with same functionality as the stock rom. I was happy with it until now. For some reasons I need to get original stock rom on it now (e.g. update capability by Samsung) and here my problem starts:
I downloaded N8010XXUCMA5 - Open Germany - JB 4.1.2 file, extracted the zip and flashed my N8010 with Odin 1.85 and the xxx.tar.md5 file. It worked perfectly until trying to write the boot.img data. At the very last second (actually 1 or 2 seconds before it should have been finished) the procedure failed with a red field in Odin and the word Failed in it.
Then I just tried to restart the device normal and I got the "DEAD-SCREEN" (An issue occurred while updating device... a.s.o.).
Frustrated from hours of work - I tried the same procedure three times with same result - and sleepy I decided to go back to a custom rom for now. So !! I flashed CWM on the N8010 by Odin and made a system restart.... !!!!! I couldn't believe: N8010XXUCMA5 rom started perfectly and works without any problems...
But my main problem stays: I can't use update functionality to update to newest Samsung version...
Does anybody have an idea on how to resolve this problem and just install original stock rom by Samsung? (e.g. resetting binary counter - not yet tried, etc....).
Do I have to do special procedure before installing N8010XXUCMA5 version???
Thank you all in advance for any help and/or ideas!!!
Best regards, Ingmar
Click to expand...
Click to collapse
Not really know what do you mean about boot.img, but I flashed my note using stock rom dozens of time without any problem, just Odin and the stock 4.1.2 rom.
I was thinking, probably the rom you downloaded was corrupted or something. I would do a factory reset from recovery mode and try flashing other version (older 4.0.2). Then do the upgrade from the settings menu instead. Probably you'll need to upgrade to 4.1.2 first then to 4.4
Resetting binary count works PERFECTLY, using triangle away (props to the dev; chainfire, purchased it immediately). You need to root your device to use it tho. And yest, GT-N80XX is supported (mine is GT N8000, Wifi-GSM).
hope that helps.
cheers

Thank you for your answer.
I tried now four different firmware versions (cma5 to cmk2) also with triangle away before (triangle away -> reset counts and status -> boot to download mode -> flash versions).
Neither of the versions work. The flashing by Odin 1.85 always fails between 20% and 99%.
Why this could hapen??? Does anybody have an idea or suggestion on how to get an official version of JB and recovery on N-8010???
Best regards,
Ingmar

http://samsung-updates.com/device/?id=GT-N8010
They even still keep ICS 4.0.4
Stock recovery :
http://forum.xda-developers.com/showthread.php?t=2102677
cheers

[Q] HTC One Mini 601E problem and bricked after trying to install CyanogenMod

Hello guys
I have an HTC One Mini 601E, and today I've try to install Android Kitkat 4.4.2 via CyanogenMod ( by following the procedure on ibtimes, update-htc-one-mini-android-4-4-2-kitkat-via-cyanogenmod-11-rom-1433685 [sorry it seams I cannot post any link as new member...]) so I rooted the phone, installed SuperSU and installed a recovery mod and everything necessary but after trying to install the zip "Android 4.4.2 KitKat Cyanogenmod 11 ROM" few time and with first ClockworkMod and then also TWRP recovery tools I still get the same error : set_metadata_recursive: some changes failed" (Status 7). (even using recovery base Phil..)
I've try few things to try to solve it lbut still get the same error. So I'm wondering why and how I could resolve this. I'm thinking also that this phone is 601E and not 601S. I mean, this phone come from Taiwan, my girlfriend bought it for me but I'm in Australia actally. I know there is just a little difference about the baseband between these two model (601E and 601S). So I was wondering that maybe I need a different version of the Android 4.4.2 KitKat for my phone that come from Taiwan ? I don't know.. but actually I cannot do anything with my phone, when I turn it on I can see the logo HTC and then it reboot again. I can only access the fastboot menu and the recovery mod.
So my questions are :
- How could I successfully install this Android 4.4.2 KitKat Cyanogenmod 11 ROM on my phone ?
- And if it is just not possible or just not working, how can I come back to the previous Android OS that was installed before (Jelly bean) ?
I think to understand that I need a RUU m4 for my phone, I've found some on the website androidruu.com in the M4 RUU category) but I'm not sure if it is the right RUU file for my phone version.
I hope my phone is not broken and hope also to find some help here also sorry for my english is not perfect I hope it is enough clear
Thank you very much for any help.
Jona

I successfully installed another mod but based on Android 4.3, not 4.4 Kitkat.So it's ok
But if somebody know or have an idea about how I could install Android 4.4, I still interesting
Thank you

H60-L02 return to stock help

Hey guys,
Have had my Honor 6 H60-L02 FDD-LTE for little under 4 hours now
Already unlocked the bootloader and flashed CWM V.6.0.5.1
I installed the MIUI v4.9.6 Rom and i don't really like it, it keeps coming up saying com.android.phone has stopped, and when you update to v4.12 it gets stuck in a boot loop
So I don't think MIUI is very stable for the phone, and I want to install EMUI v3.0 (This isn't lollipop yet is it?)
Long story short, I figure i have to reflash the stock recovery firmware because CWM wont install an Update.App file
I downloaded the Honor 6 Multitool
When i get to install recovery, i choose my honor 6 model then it asks for EMUI 2.3 or 3.0, i tried all the 3.0's and they dont load the recovery, just go back into android
so i tried some of the EMUI 2.3's, i have no idea what each number at the end represent and which one suits my phone... i.e B118SP02?
So that is what stage im at, i have MIUI v4.9.6 with CWM V.6.0.5.1
And i am trying to install EMUI v3.0 stable
Any help would be pretty awesome, can say im slightly disappointed with the availability of roms for this phone, but hopefully this will change in the future

Ok ...
i will start from beginning , i will tell you how to get the last stable update for your phone .
witch is B310【EMUI3.0_Android4.4】.
First Download it from here it's 1GB .
or from here (you should translate it first and click on stable and download) .
Second continue with this link .
Attention : Do step 6 before 5 .

Or go to
http://forum.xda-developers.com/showpost.php?p=57274153&postcount=1
scroll down to: 3 Button Restore not working (If you change between variant example L02>L12) Or Partition been changes and cannot restore back Stock version. Use this steps below : -
Links to the revert package etc are in the post too

Tried Myahyam's method and now the phone is stuck in a boot loop (shows the honor, powered by android splash, goes black then repeats the splash)
need to unbrick the damn thing now
im following the honor 6 multitools unbrick method, its in fastboot transfering files now, will report back when its done.
Just out of curiosity, besides MIUI and EMUI, what other roms are available to flash using CWM or TWRP?

Okay, managed to get CWM back on and sideload the MIUI4 rom again, just to prove to myself that I didn't brick my phone, so that parts all good!
I will have to try your method another time Julsen, i fly out on a 3 week holiday tomorrow morning, and want to load some games and movies to the phone to watch on the plane.
Hopefully when I come back in 3 weeks, there will be a better choice of roms to install using CWM/TWRK
If not, I will attempt your method Julsen, at least i now know how to fix any softboot/bootloop problems, good learning experience all up!

Here u will find couple of custom roms flashable via cwm
http://bbs.anzhi.com/forum.php?mod=forumdisplay&fid=1387&filter=typeid&typeid=15409&mobile=no
Sent from my H60-L02 using Tapatalk

Help me please!
I am having exactly the same problem that serpent is having.
Did any1 found solution?

Hey all, back from my 3 week trip
@nrpetonr i went to that site and grabbed two roms to flash using CWM, they both seem to put it into a boot loop
This phone is strange really, ever since i have unlocked the bootloader and put on a custom rom, its been the only rom that has worked, the rest all put me into a bootloop
Maybe i should try TWRP instead

Touch screen mirrored after custom rom

Hey Guys,
So i have a big problem with my International Galaxy S6 Flat. I tried to update from a custom rom to a stock android 6.0 rom and i failed, so i got stuck in a bootloop. I used a custom rom again so i can get out of the bootloop, but when i tried to set the options in the android installation menu i discovered that my x axis got inverted. So whenever i try to press D i get a K.
I even tried to use the *#2663# code which i read on this forum. but this doesn't work, it doesnt show me the menu to download the firmware. is there another way to download that firmware ?
I flashed new kernels,bootloaders, everything. But i just can't fix it. I'm so desperately atm. I hope you can help me.
Thanks.

Anyway. Flash official ROM from Sammobile and you will be fine.

Rooted with old firmware trouble installing custom ROM's

I'v done a ton of reading and plan to get good at this.. I have been having ALOT of trouble trying to install various custom ROM's. I get no further than stuck on the splash screen. I have a backup and reinstall it without any trouble after each of my failed attempts using TWRP v2.8.6.0, mind you after installing TWRP the first time i was stuck in a boot loop and had to try older? versions until one worked but had to dial *#2663# and fix the inverted display.
I read somewhere that the kernal needs to match the firmware, could my problem be extremely out of date Kernal, Baseband or Bootloader as my phone has been rooted for quite some time running stock firmware without any updates.. Thinking about unrooting so my phone takes the latest update and re routing.. I'm kinda lost here..
Here is some of the information from my phone..
Samsung S6 920w8
Android 5.0.2
Kernal 3.10.61-4808800
AP: G920W8VLUV1AOE1
CP: G920W8VLUV1AOE1
CSC: G920W80YA1AOE1
Thanks for your help and advice

Anxious to get a custom ROM working.. can someone guide me?