Database Info

[Q] Xposed for lollipop on XT1033

Hey guys,
So I'm sure a few of you must be aware of the fact that Rovo89 has released an alpha version of Xposed for android 5.0 and up,
which is available here
I wanted to ask if anyone has tried to install Xposed on their 1033's successfully, because I want to avoid screwing up my phone again.
So please comment on whether you have got it working, along with the recovery and android version you were on.
Thanks

I did.. it's being a night mare.. apk is not getting installed and the framework zip was flased for nothing.. now I am kinda screwed, phone is totally slow and strge says it's gone/// I am trying to see if there are any other better options to work this out.. otherwise I have to flash sourav firmware

Yes i did..and its working fine for me..i m using xt1033 running on android 5.0.2 srock with philz recovery install...its working fine in lots of xt1033 with various roms..here is a thread for working module if u want
http://forum.xda-developers.com/showthread.php?t=3032004

Alright, I've done it and it works perfectly
you should flash ROm, then wipe cache and dalvik. it works fine.

Can anyone provide me exactly which version of Xposed Framework needs to be installed for Moto G XT1033 running on stock rooted 5.0.2? Link would be appreciable as the one I downloaded isnt working.

error running modules
this is all very confusing for me...
i've tried following every step carefully... it installs fine but none of the modules are working for me...
can anyone pls tell me what version do i need for XT1033 running CM 12.1 (android 5.1.1)
thnx

Hi
I have an issue with an XT1032 running 5.0.2. I flashed Xposed with TWRP and it went fine. But, the phone shows a low space warning and the apk does not install. Tried to remove almost everything (3 GB now free) and still the warning.
Does anybody faced this already? Is there a way to make it work?
Thanks

Xposed framework bootloop on 6.0.1 .244 update... Driving me mad

So, all is well here, the .244 update came and it is smooth as hell, only problem is that xposed is terrorising me.
I installed every .zip xposed files possible for 6.0 and 6.0.1 all giveing me bootloops after i restart the phone...
At first i thought it was a module causing the problem, i had wiped my phone clean several times... Still...
Please help...

It did work fine for me, no issue at all... (with latest xposed v85)

can you share the zip pls

http://dl-xda.xposed.info/framework/sdk23/arm64/xposed-v85-sdk23-arm64.zip

thx, but i have found the problem. Apperantly the problem was in the kernel, i flashed the one that came with the ftf a user shared, after i flashed androPlus's kernel everything was normal

Flashed NVIDIA's WiFi 4.1 (MM 6.0.1) update, and now Xposed won't work

So I updated my newer Shield Tablet to 4.1, and restored everything, flashed SuperSU and Xposed and Viper4Android.. It was working fine until I enabled some Xposed modules and rebooted. It gets stuck on the NVIDIA logo and nothing happens. I got it to boot once after flashing Xposed, but the app said that Xposed was installed but not enabled ("see the logs," which made no sense to me). It said there was an update to the app, so I updated it, then downloaded the zip once again and flashed it, and got the NVIDIA logo stuck again. This is horsh!t. Why is it suddenly not working? I'm using the latest, xposed-v85-sdk23-arm zip.

Bump? Been a day and no response??

GuyInDogSuit said:
Bump? Been a day and no response??
Click to expand...
Click to collapse
Maybe nobody knows HERE?
Xposed is working here with NVIDIA-Update 1.2 (6.0.1) without problems. Did the modules you installed work before the update? A bootloop is a common problem with Xposed.
I doubt that this is ROM problem but an Xposed problem. I would try to find help in the Xposed section. Maybe you should try to find the logs...

edisso10018 said:
Maybe nobody knows HERE?
Xposed is working here with NVIDIA-Update 1.2 (6.0.1) without problems. Did the modules you installed work before the update? A bootloop is a common problem with Xposed.
I doubt that this is ROM problem but an Xposed problem. I would try to find help in the Xposed section. Maybe you should try to find the logs...
Click to expand...
Click to collapse
No, it's a ROM problem. They worked fine before.

I'm also using the 6.0.1 update and the latest xposed with no problems. I'd say it's one of your modules not being compatible, not a ROM problem at all, except that the module doesn't seem to be updated to work on mm.
Sent from my SHIELD Tablet K1 using Tapatalk

Exile1975 said:
I'm also using the 6.0.1 update and the latest xposed with no problems. I'd say it's one of your modules not being compatible, not a ROM problem at all, except that the module doesn't seem to be updated to work on mm.
Click to expand...
Click to collapse
I use the same modules on my phone running 6.0.1, with no issues. It's not a module.

did you flash arm version or arm-64 version? cuz arm-64 and intel wont work and there is a systemless xposed try using that if all else fails. I can use xposed myself on 6.0.1 myself btw.

m666p said:
did you flash arm version or arm-64 version? cuz arm-64 and intel wont work and there is a systemless xposed try using that if all else fails. I can use xposed myself on 6.0.1 myself btw.
Click to expand...
Click to collapse
As I stated in the op, it's the xposed-v85-sdk23-arm zip.

Tried reflashing the ROM, the USA LTE version this time, and I'm STILL getting stuck at the boot screen, after enabling modules. I got it to boot with JUST Xposed, no modules.

GuyInDogSuit said:
Tried reflashing the ROM, the USA LTE version this time, and I'm STILL getting stuck at the boot screen, after enabling modules. I got it to boot with JUST Xposed, no modules.
Click to expand...
Click to collapse
As stated before, a module your using isn't updated to work with our implementation of 6.0.1. now reinstall modules one at a time until you figure out which one is causing problems and then ask in the xposed section for that module. Glad you finally figured it out tho
Sent from my SHIELD Tablet K1 using Tapatalk

Exile1975 said:
As stated before, a module your using isn't updated to work with our implementation of 6.0.1. now reinstall modules one at a time until you figure out which one is causing problems and then ask in the xposed section for that module. Glad you finally figured it out tho
Click to expand...
Click to collapse
Well, it was BootManager, but it's working fine on my phone with 6.0.1.

Nope, wasn't BootManager, either. Just not working, at all.

I'm at a loss right now

I've been trying to get viper4android to install, I followed this guide here:https://forum.xda-developers.com/ve...-to-notes-root-install-xposed-unroot-t3411039 and that's all fine and dandy but it looks like I keep running out of room in my system partition to install viper with the other tweaks that I have installed and it acts like it installs fine but when my phone boots back up viper doesn't show and no matter what I try nothing works. My phone model is SM-G930U and I am running 4apl2 firmware I also have xposed installed

Official Xposed for Nougat is out, anyone tried on Sony's Stock ROM (32.4.A.0.160) ?

Official Xposed for Nougat is out,
Anyone tried it out on Sony's Stock ROM (e.g. 32.4.A.0.160) ?
Seems like the most important Modules are/were already working [feedback from the Unofficial Nougat variant]: https://forum.xda-developers.com/xposed/unofficial-list-modules-nougat-xposed-t3639615
Let's see if it also works with the official one,
that keeps the ART, JIT, etc. optimizations - so things might be different

Yes, it works. Gravitybox & Greenify installed.

Duvel999 said:
Yes, it works. Gravitybox & Greenify installed.
Click to expand...
Click to collapse
which version are you using? I've tried a few times always with bootloops.

I tried it with stock odexed rooted 1.54 7.1.1 ROM and it worked fine with some of my modules , other modules did not recognize the zposed FX presence in the system.

Tried it on e6633 w/ fw 2.33 : Stuck at boot after the logos have disappeared.
Edit: it works perfectly, just take a hell lot of time to boot (~10mins)

crisout said:
which version are you using? I've tried a few times always with bootloops.
Click to expand...
Click to collapse
Xposedinstaller 3.1.2 apk
Xposed v88 sdk25 arm64.zip
( Download uninstaller also => latest version 2016)
Gravitybox_Nougat 7.0.0 Alpha 01
Booting took some time.
Now on latest A.1.54 firmware without Xposed.

Flashed it on 7.1.1 .154 (the newest)
All my modules are working fine (tho first boot took very long, some may mistake it for bootloops)

Duvel999 said:
Xposedinstaller 3.1.2 apk
Xposed v88 sdk25 arm64.zip
( Download uninstaller also => latest version 2016)
Gravitybox_Nougat 7.0.0 Alpha 01
Booting took some time.
Now on latest A.1.54 firmware without Xposed.
Click to expand...
Click to collapse
Thanks, how much did it take? 10, 15, 20 minutes?

5-10 minutes. Take care for a charged phone.

greenify 3.7 is not compatible with the new xposed framwork. I am using this modules on stock 32.4.A.1.54 : 1-bootmanager 2-ambient display xposed 3-gravitybox 4-xinsta 5-xperiafmwohs

Took 7.5 minutes on my latest custom kernel here on 32.4.A.0.160 (7.1.1), now let's see what this puppy can do
s.hossein said:
greenify 3.7 is not compatible with the new xposed framwork. I am using this modules on stock 32.4.A.1.54 : 1-bootmanager 2-ambient display xposed 3-gravitybox 4-xinsta 5-xperiafmwohs
Click to expand...
Click to collapse
@s.hossein what features of GravityBox are you using ? do they work ?

Will it take that long every time you boot the phone? Or just the first time?
Because I installed xposed and thought it wouldn't get past the loading screen at all on my Z5, so I uninstalled xposed again.
But if it's only the first time booting I might reinstall it.

Noisecake said:
Will it take that long every time you boot the phone? Or just the first time?
Because I installed xposed and thought it wouldn't get past the loading screen at all on my Z5, so I uninstalled xposed again.
But if it's only the first time booting I might reinstall it.
Click to expand...
Click to collapse
No only first time takes longer. Use updated Xposed if available.