Related
Any info or links would be great
Got the phone off ebay and looked like it had been kicked about.
I plan to replace the touchscreen , lets hope iam not out of my depth ^_^
cheers
hep
Just go to a Samsung Service Center and get it replaced.
It's the best option.
I have seen other Android Phones which had their screens replace the unofficial way and a partial part of their screen was no longer functional....
as a comparison, you can check it out at http://www.globaldirectparts.com/Samsung-Galaxy-Fit-S5670-Digitizer-Touch-Screen-p/smsng6102880.htm
ok so i done it worked ok
would not recomend this for anyone and if you do its your fault
tools i used few screwdrivers tweezers scalpel cleaning cloth screen cleaner
small tray to work on , lil bag for screws
1. switched off phone , removed back cover , memory card , sim and battery
2. carefully removed the 6 screws and put in bag, the removed the backplate was a pain but managed without breaking it.
3 next there was a connection at top and on left hand side to disconnect , all so the headphone connector comes off , then you can take the motherboard off.
4. now it got tricky !very small part with a 9 on it pull the black tab up and leave it lose . i heated the front up a bit for next bit then gently got the digitizer lose it has some clips at bottum so start at the top .
5. cleaned a finger print off the lcd and replaced with new one , rebuild and was surprize it worked tbh
enjoy the pictures
hep
ohhh did u replace the screen by yourself!!!
yes was a pain
but good for you that it worked...
You've got the balls man..
hep2o said:
yes was a pain
Click to expand...
Click to collapse
WOW u have the skillz man
I know there are thousands of people looking all over the web for a solution to their captivate's rear speaker cutting out and I am happy to report I have a solution for you! I searched all over these forums, all over google, and by the grace of God I somehow found this suggestion in a comment on a pointless YouTube video with around only a thousand views. But whatever! Here it is...
Take off the back casing of your phone (it's not too difficult; here are the instructions http://forum.xda-developers.com/showthread.php?t=740022)
Once you have the back all opened up you should see one lone screw remaining just to the left of the speaker
Loosen the screw
That's it!!!!!!!! The guys' comment on YouTube said he noticed the screw was in so tight that that it was bending the circuit board and messing up the connection. Which makes sense to me because earlier I noticed that pushing down on the right side of the speaker (on the opposite side of the screw) seemed to help better than pushing anywhere else.
So stop listening to all the threads that say "just push on the speaker" or "get it repaired" or "just deal with it." I had jammed stuff in behind my back cover that was so thick it started to bend the metal, but it was always just a temporary fix. No pressure was ever enough pressure to get the speaker consistently working. Who knew the answer would be less pressure? Or that it would be so simple...
Now go fix your phone and enjoy!
UPDATE: If you are still having problems, try mithileshpatel007's fix from page two of this thread. Sounds like people have had luck with his method too. He suggests repositioning the speaker ribbon. The ribbon is located on the far right and can be seen going from the bottom of the speaker housing to a small terminal that may be covered by a piece of blue tape. Everything is so tiny that it sort of all looks like one piece but what you can do is...
flip up a tiny black latch (bottom of the terminal)
reposition or remove + replace the ribbon (enters at the top of the terminal). There isn't much slack, but try to get it as far in there as possible
PLEASE BE CAREFUL! The ribbon is tiny and pretty stiff and some people have reported problems just getting their phone open, much less playing around. Remember this is a tiny device made to do big things so it's not as durable as your GameBoy Color! Handle with care.
Clarification
I should clarify. I loosened the screw till it was coming out and then tightened it VERY gently. I screwed it back in and stopped at the first feel of resistance. I did this last night and have been blasting music and getting notifications without any problem since.
Check back in a day or two. A couple hours of a fixed speaker doesn't impress me...been there done that. But I did fix mine tho.
Sent from my SGH-I897 using xda premium
Thanks for this info. My speaker just started acting up the other day. I pushed on it like others have said to, and so far it has been good for a couple of days now. If it so much as acts like it is going to do this again, I will take the above steps.
Thanks!
Check back in a day or two. A couple hours of a fixed speaker doesn't impress me...been there done that. But I did fix mine tho.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
My speaker is still working great. I understand the skepticism but I wanted to put the post up right away because 1) the fix made so much sense to me, 2) my speaker was ALWAYS cutting out before I did it and NEVER cut out after, and 3) I wanted to help as many people as soon as possible because I know how maddening this problem is!
How did you fix yours? And by the way, impressing you was never my goal
Works!
Thanks for this suggestion! I've been fighting this problem for months now and the tap-tap-push method only ever fixed the problem for a few minutes. Since trying your "fix" my speaker has worked for 2 days now!
Thanks so much for this... Had mine fixed in a jiffy...
snoboarder071 said:
My speaker is still working great. I understand the skepticism but I wanted to put the post up right away because 1) the fix made so much sense to me, 2) my speaker was ALWAYS cutting out before I did it and NEVER cut out after, and 3) I wanted to help as many people as soon as possible because I know how maddening this problem is!
How did you fix yours? And by the way, impressing you was never my goal
Click to expand...
Click to collapse
Lol
Sent from my SGH-I897 using xda premium
Finally!!!
no more being late for work because the alarm didn't sound!
so far so good! before the fix my captivate had sound maybe 5% of the time. hasn't cut out yet since loosening that pesky screw!
thanks!
For those of you who do not have warranty or insurance, there is a fix for this.
I just got done with re assembling the phone after a fix I performed. It is real easy to do.
Things you need:
-A screwdriver (whatever the size is when you open the back cover, the four screws you see, that size)
-A small flat head screwdriver if you have one (not necessary but would help)
-Patience and some common sense.
Ok, to start off follow these steps http://forum.xda-developers.com/showthread.php?t=740022 to open the first 6 screws and then how to pop open the screen from the bezel(this is when a flat head screwdriver would be useful).
(go just to the step till the fifth picture in that thread, no need to go beyond that opening things!)
Now, you would see a screw on the left of the speaker. Now, other threads said that by loosening that screw the speaker would work. But, I did that and still had issues so I opened the phone like 4 times in total before I found out what it was. Now, notice that the speaker unit has a cable (orange colored) running into the main phone chip. It is connected there through which it functions. When you open that above mentioned thread to open the phone there is a picture showing to remove the that belt from the board. Follow that instructions, flip that tiny black clip up to remove the belt. In some cases there might be a blue sticker kind of thing on the belt, just take off that sticker. The problem seems that the belt is loosing contact which doesn't allow the speaker to get the sound input to put out sound through the speaker. So, take off the belt by flipping that switch and re insert it out there. Try to push it in properly or enough to align a white line on the belt and the chip. There is a white line to guide us there. That line should be totally straight when the belt is inserted appropriately. And now, flip that clip down and lock it. If you have loosened the screw left to the speaker, put it back in in normal force not excessive(no need to be more gentle here). You cannot leave it loose because it makes the whole unit move when it is loose eventually pulling off the belt from its place which causes the sound cut outs. The whole trick is to get the belt right in its place. So, make sure it is tight but not extra tight after you have managed to get the belt right. Put everything back together and now when you screw the last 6 screws again, the one in the top speaker corner affects the speaker unit, so don't push it too hard in. Just normal screwing. The rest should be done properly with normal force. This should solve it. I figured this out after opening the phone 4 times. And now playing songs since the past 6 hours non stop and its back in action again!
For all this, i did put in the battery and start the phone when I had opened it and tried messing around and figured out what was killing the sound, so this should be the ultimate solution to it. There is nothing else that can be affecting it now.
Most people must had faced this because they dropped their phones before which made the belt to move and hence the loose contacts inside. If not then, there are high chances that you bought it from someone or somewhere who had dropped it before!
Well that's it! Also, don't freak out in having to open the phone. You should just go to the step till the fifth picture. Which is very easily achievable!
Go, have fun with your WORKING speakers now!
I tried to open my Cappy but failed a unscrewing the middle screws...they are soo tight
My problem is that the ribbon cable between the speaker and the board is too short. No way to line that white stripe up. Got it in there as best I could and so far so good
I'm just guessing... but I would think that because this could possibly void a warranty is the only reason they don't make this a sticky, but it really should be...nice find and much appreciated. It is a common and very annoying problem and this fix really does seem to work!
Sent from my SAMSUNG-SGH-I777 using XDA App
Rear Speaker Fix - Thanks for the advice!
Just successfully disassembled my wife's phone without busting it into 1 million pieces. I loosened that screw next to the speaker, tightened just until i felt it start to grab, backed it off 1/16th of a turn, and the speaker works now. Great job on hunting down that video.
-Word of advice, The screw your loosening on the speaker housing is also the screw that holds the motherboard secure. I would recommend not removing the screw. The Captivate may self destruct if you do so.
10 out of 10 HERE! THUMBS UP!
Thanks.
______________________
Samsung Captivate i897
Firmware: Gingerbread 2.3.5
Baseband: I897UCKK4
Kernal: 2.6.35.7-I897UCKK2-CL614489
BUILD: GINGERBREAD.UCKK4
worked for me
So I attempted this fix, considering I had no sound from the speaker at all.
I managed to somehow break the black connector flap that holds the ribbon cable in off of the connector. Now the speaker has no connection whatsoever, and now I don't have the vibrate function as well. (The speaker and vibrating motor are in the same assembly.)
Just a word to the wise. (I think I had actually broken my speaker, because I could get no sound at all, even before I broke the connector.)
mithileshpatel007 said:
For those of you who do not have warranty or insurance, there is a fix for this.
I just got done with re assembling the phone after a fix I performed. It is real easy to do.
Things you need:
-A screwdriver (whatever the size is when you open the back cover, the four screws you see, that size)
-A small flat head screwdriver if you have one (not necessary but would help)
-Patience and some common sense.
Ok, to start off follow these steps http://forum.xda-developers.com/showthread.php?t=740022 to open the first 6 screws and then how to pop open the screen from the bezel(this is when a flat head screwdriver would be useful).
(go just to the step till the fifth picture in that thread, no need to go beyond that opening things!)
Now, you would see a screw on the left of the speaker. Now, other threads said that by loosening that screw the speaker would work. But, I did that and still had issues so I opened the phone like 4 times in total before I found out what it was. Now, notice that the speaker unit has a cable (orange colored) running into the main phone chip. It is connected there through which it functions. When you open that above mentioned thread to open the phone there is a picture showing to remove the that belt from the board. Follow that instructions, flip that tiny black clip up to remove the belt. In some cases there might be a blue sticker kind of thing on the belt, just take off that sticker. The problem seems that the belt is loosing contact which doesn't allow the speaker to get the sound input to put out sound through the speaker. So, take off the belt by flipping that switch and re insert it out there. Try to push it in properly or enough to align a white line on the belt and the chip. There is a white line to guide us there. That line should be totally straight when the belt is inserted appropriately. And now, flip that clip down and lock it. If you have loosened the screw left to the speaker, put it back in in normal force not excessive(no need to be more gentle here). You cannot leave it loose because it makes the whole unit move when it is loose eventually pulling off the belt from its place which causes the sound cut outs. The whole trick is to get the belt right in its place. So, make sure it is tight but not extra tight after you have managed to get the belt right. Put everything back together and now when you screw the last 6 screws again, the one in the top speaker corner affects the speaker unit, so don't push it too hard in. Just normal screwing. The rest should be done properly with normal force. This should solve it. I figured this out after opening the phone 4 times. And now playing songs since the past 6 hours non stop and its back in action again!
For all this, i did put in the battery and start the phone when I had opened it and tried messing around and figured out what was killing the sound, so this should be the ultimate solution to it. There is nothing else that can be affecting it now.
Most people must had faced this because they dropped their phones before which made the belt to move and hence the loose contacts inside. If not then, there are high chances that you bought it from someone or somewhere who had dropped it before!
Well that's it! Also, don't freak out in having to open the phone. You should just go to the step till the fifth picture. Which is very easily achievable!
Go, have fun with your WORKING speakers now!
Click to expand...
Click to collapse
This worked on mine, thank you!!!
don't know why but i can't get that battery latch to move down to get the two remaining screws
disellusional said:
don't know why but i can't get that battery latch to move down to get the two remaining screws
Click to expand...
Click to collapse
after sliding it down just lift it slightly in the middle, it flexes up and then slides down about another half inch.
After taking apart the GPS antenna module(led flash cover), cleaning the antenna contacts on the cover and spring clips on phone, and SLIGHTLY bending the spring clips out for improved contact with the cover the GPS lock was back to being less than 10 seconds for initial fix and instant refix.
With such an improvement I decided to do the same procedure to the other 2. The antenna under the battery cover(clean and bend spring contacts out alittle), and the one under the sim/sd card cover(clean and bend spring contacts out a little). My WiFi signal is definitely much better at distance! Bluetooth is better as well!
It is not difficult to do at all, and the results are immediate and VERY noticeable.
Search YouTube for desire hd/inspire 4g GPS antenna cover removal so you don't f it up. Hardest thing is getting GPS cover off, and it takes all of 5-10 minutes!
Good luck all.
Sent from my Inspire 4G using XDA
Thanks. This actually increased the speed of my stock inspire and battery life.
Sent from my Desire HD using XDA
GPS FIXED!
I wanted to bump this thread, as I ended up finding this solution on another forum. I have almost always had issues getting my GPS to lock. I tried all the software based fixes, but none of them seemed to really work. I opened my antennae, cleaned/bent the pins, and now I get INSTANT GPS lock (without any software fixes installed). I strongly urge anyone with issues to try this.
Another alternative is to solder a new antennae:
http://forum.xda-developers.com/showthread.php?t=1318892
yes it is a good thing to clean the contacts and rebend them for additional contact force. That ghetto wire solder job that the person did in your link is only a hair above trying to get a gps signal while hopping on one foot. There is quite a bit of calculations that have to be done to choose antenna length and thickness in respect to the frequency it operates on. What this user did was just pick a random length of wire and connect it, and poorly soldered at that (they probably have a coat hanger coming out of their tv). This type of modification is a TERRIBLE idea and should be avoided at all costs.
But as I said, what the OP did in this thread with the cleaning, this is a good idea.
what did u clean it with?
Im looking at the silver led cover and im like how the hell you take that off I know like something needle nose pliers.
I basically just scraped the metal until it was shiny. A fine steel wool would work, or even sand paper. You just want to get any gray stuff off.
CYRAXDroid said:
Im looking at the silver led cover and im like how the hell you take that off I know like something needle nose pliers.
Click to expand...
Click to collapse
You do it from the inside .
Summary: You are going to remove the battery and then It should reach back to where the plastic cover is. From there you can push (from the inside) the plastic peach and then slide something under it to keep it propped open.
1) Remove your battery
2) You need to prop the plastic piece up from the inside of the case. You could bend the tip of a knife, or whatever.
3) You slide the "prop" inside the battery slot and you want to line it up under the plastic piece around the light.
4) From there you can "push" it up and slide something under the edge to keep it lifted (I used guitar pics). You probably want to use a couple to work your way around.
5) Remove it from the battery facing side first.
Once you have it off it should be obvious where the metal pins are. Bend them upwards, and scrape/clean them off if there is any discoloration.
Putting it back together is a little tricky. Be careful to not break any of the snaps .
Thank me if this helps!
Well I didn't do it but still thank you for posting that info
Sent from my HTC Inspire 4G using xda premium
The myTouch 4g is a good, reliable phone. When, rooted, it is even better. We happily flash ROMS away, without a care in the world. One day, however, your power button just stops working . Dread, fear, and despair right? Well there is hope! If your power button doesn't work, there are a couple of things you can do before you head for the wallet to spend big bucks on a new phone.
1. Send to HTC.
The most recommended thing to do is to check if your phone has warranty and send it in to HTC if it does. You can either call (preferable) or send in a e-mail. Remember, even if you are rooted and you send in you phone with a custom ROM, HTC will not charge you unless you remove the "VOID" sticker in the back. This is the painless, easiest method, with little effort required, *although you will have to survive without your phone for atleast a week (which was hell)
No warranty?
If your phone is out of warranty, or if you removed the VOID sticker for whatever reason and Dont feel like paying HTC $125 to fix it, there a couple of things you can do.
2. Jury-Rigging (self-fix method)
This method is for those that are comfortable opening up their phone and want to fix the power button for themselves.
*Tools: aluminum foil, Torx T5 screwdriver, small phillips screwdriver, safe-open pry tool.
This idea was inspired from XDA user jjbadd385 who mentioned in a thread I can't quite remember that he had turned on his phone by using aluminum foil to touch the actual power button underneath the outer casing. I recommend using this thread and video http://forum.xda-developers.com/showthread.php?t=1591388 to safely open up the phone. Ofcourse, you wont need to dismantle the whole phone, all you need to do is remove the outer casing (black rubber thing the surrounds the edges of the phone). Just do the First step from the guide provided. BE CAREFUL not too lose a little spring that is located near the power button, without it your power button will feel like "its stuck", but the spring itself is NOT necessary to turn the phone on. You will then see your actual power button at the top of your phone. Now here comes the fun part. Using your eyes, and common sense, cut out a small piece of aluminum foil that is about roughly the same size as the power button. Using your hands or the pry tool, bend the aluminum so that it comfortably fits in that little square area directly on top of the power button. Now carefully put the rubber casing back, be wary of the aluminum falling out of place. It may take some patience, but it shouldn't be too difficult. If put correctly, your phone should now start up! Now your power button should work whenever you click it
***If for some reason it doesn't, there could be a problem with the actual ribbon itself (which would be unfixable unless u bought a new ribbon), but most likely the aluminum foil probably was not placed right or was moved putting the casing back on.
****If enough people request, I'll probably make of video/picture slides of the Jury-Rigging method, but right now I have to study for my Sociology test and I'm too lazy
*******************************************************************
Want to turn on your phone, but you don't have the tools for the Jury-rigging method and you need your phone NOW?
If you are UNROOTED: (this method is untested by me) From doing a quick google search, there have been people who have turned on their myTouch 4g by simply connecting the phone to the charger and immediately holding the HOME button for about 5-10 seconds. Some have had success with this, but personally, It has not worked for me.
If you are ROOTED and your phone has these things:
Clockworkmod Recovery 5
ADB debugging enabled
You must have adb debugging already enabled on your phone or else this will not work! Even though the phone is powered off, commands somehow still go to the phone!
Make sure to set up ADB on your computer (there are multiple guides in XDA)
-Then simply connect your phone to your computer, open your terminal. Check to see if your computer reads your device by running this command:
Code:
adb devices
If your computer reads it, then you'll be all set!
Then, run the command:
Code:
adb reboot
Give me lifeee! Your phone should then reboot!
THANKS
to jjbadd
to repairsuniverse for the excellent video/instructions
to my myTouch 4g. Its a love/hate relationship
to anyone else i somehow forgot
and to XDA --sharing is caring
**** Please Give "thanks" if I helped revive your phone and please donate to my college books fund!!
I want to add that underneath the outer case, and sitting on top of the flex ribbon, is a very very small piece, that adds that "spring" to the outer button itself, & it falls out of place. Mine did, and to my suprise, when I opened my phone, I apparently lost it because it was nowhere in sight. Also, I have a 4ext recovery image, that was compiled specifically for me by madmaxx82, that when I flashed it, I can power my phone completely down, then plug in the charger, & it will automatically boot up into recovery. I then select "reboot" and it reboots my phone normally. It's a neat little utility, that keeps me from cracking my phone open.
Sent from my HTC Glacier using XDA Premium
jjbadd385 said:
I want to add that underneath the outer case, and sitting on top of the flex ribbon, is a very very small piece, that adds that "spring" to the outer button itself, & it falls out of place. Mine did, and to my suprise, when I opened my phone, I apparently lost it because it was nowhere in sight. Also, I have a 4ext recovery image, that was compiled specifically for me by madmaxx82, that when I flashed it, I can power my phone completely down, then plug in the charger, & it will automatically boot up into recovery. I then select "reboot" and it reboots my phone normally. It's a neat little utility, that keeps me from cracking my phone open.
Sent from my HTC Glacier using XDA Premium
Click to expand...
Click to collapse
yeah, I too lost the spring as well! good catch!!
I too use to do pretty much the same thing (plug-in the phone to turn it on) But now with the aluminum foil in-place inside the phone, I can use the power button whenever!
Thanks again for the insight about using aluminum foil!
Alternate material option
I had a similar issue with my power button and came to this solution also but instead of aluminum foil I used a piece of disposable aluminum cookie sheet because it was thicker and has some spring in it. I started with aluminum and it didn't work so well - I think the aluminum foil deforms too much to work reliably over multiple operations.
But if you can get your phone replaced by the carrier or manufacturer do it because these things aren't made to be repaired.
mytouch4g-user said:
I had a similar issue with my power button and came to this solution also but instead of aluminum foil I used a piece of disposable aluminum cookie sheet because it was thicker and has some spring in it. I started with aluminum and it didn't work so well - I think the aluminum foil deforms too much to work reliably over multiple operations.
But if you can get your phone replaced by the carrier or manufacturer do it because these things aren't made to be repaired.
Click to expand...
Click to collapse
Good call, the cookie sheet was certainly tougher, but not much of a big difference i guess.
Thank for the tip
And yeah, HTC seriously f'ed p with the power button in this phone. It was just desined pretty much to fail evntually lol.
Hey man would you be so kind to sharing that little piece of genius with me/us? Im one of the unfortunate ones that has this problem. PLEASE!!!!!!!!!!!!!
jjbadd385 said:
I want to add that underneath the outer case, and sitting on top of the flex ribbon, is a very very small piece, that adds that "spring" to the outer button itself, & it falls out of place. Mine did, and to my suprise, when I opened my phone, I apparently lost it because it was nowhere in sight. Also, I have a 4ext recovery image, that was compiled specifically for me by madmaxx82, that when I flashed it, I can power my phone completely down, then plug in the charger, & it will automatically boot up into recovery. I then select "reboot" and it reboots my phone normally. It's a neat little utility, that keeps me from cracking my phone open.
Sent from my HTC Glacier using XDA Premium
Click to expand...
Click to collapse
elivaldez84 said:
Hey man would you be so kind to sharing that little piece of genius with me/us? Im one of the unfortunate ones that has this problem. PLEASE!!!!!!!!!!!!!
Click to expand...
Click to collapse
Check your PM. I'll try to help anyway I can. If anything re-read the guide
Thank you so much! Foil method worked perfectly when I thought my phone was doomed.
This idea was inspired from XDA user jjbadd385 who mentioned in a thread I can't quite remember that he had turned on his phone by using aluminum foil to touch the actual power button underneath the outer casing. I recommend using this thread and video http://forum.xda-developers.com/showthread.php?t=1591388 to safely open up the phone. Ofcourse, you wont need to dismantle the whole phone, all you need to do is remove the outer casing (black rubber thing the surrounds the edges of the phone). Just do the First step from the guide provided. BE CAREFUL not too lose a little spring that is located near the power button, without it your power button will feel like "its stuck", but the spring itself is NOT necessary to turn the phone on. You will then see your actual power button at the top of your phone. Now here comes the fun part. Using your eyes, and common sense, cut out a small piece of aluminum foil that is about roughly the same size as the power button. Using your hands or the pry tool, bend the aluminum so that it comfortably fits in that little square area directly on top of the power button. Now carefully put the rubber casing back, be wary of the aluminum falling out of place. It may take some patience, but it shouldn't be too difficult. If put correctly, your phone should now start up! Now your power button should work whenever you click it
Click to expand...
Click to collapse
My phone would not turn on after I dropped it on a hard floor for at least the hundredth time (Silly name aside, I LOVE this phone for its durability and the fact that I bought it almost 2 years ago and its features are still on par with most phones out there!!). I had almost bought a new phone earlier in the day before trying one last time to find a solution online. I am so glad I found this post!
I used the foil method, although I didn't have a torx 5 handy, I was able to safely pry the frame apart enough to access the power button and put some foil on it. I am pretty sure I lost the spring before I even attempted the fix. There was also a small amber plastic square with a small metal bump in the center covering the switch poles - seemed like it might have once had to do with powering on the phone, but I took it out and now the phone powers on fine with the foil.
THANK YOU SO MUCH FOR POSTING!!!
jjbadd385 said:
I want to add that underneath the outer case, and sitting on top of the flex ribbon, is a very very small piece, that adds that "spring" to the outer button itself, & it falls out of place. Mine did, and to my suprise, when I opened my phone, I apparently lost it because it was nowhere in sight. Also, I have a 4ext recovery image, that was compiled specifically for me by madmaxx82, that when I flashed it, I can power my phone completely down, then plug in the charger, & it will automatically boot up into recovery. I then select "reboot" and it reboots my phone normally. It's a neat little utility, that keeps me from cracking my phone open.
Sent from my HTC Glacier using XDA Premium
Click to expand...
Click to collapse
You should share that recovery image
I lost it. I asked him for it again and he sent it..but it don't work for me now. However if u email madmaxx82.. tell him what u want, I'm almost positive he will oblige. He a really cool dude. I've since put foil under my button and its working great.
Sent from my Dark Unicorn Ressurected HTC Glacier
I bought the MT4G used so I just want to confirm, is there only one "void" sticker located beneath the micro SD card slot? Thanks
dinhhviet said:
I bought the MT4G used so I just want to confirm, is there only one "void" sticker located beneath the micro SD card slot? Thanks
Click to expand...
Click to collapse
yes, should only be one. Sorry for the late reply!
Thank you so much!! I thought that was the end of my phone...but good thing I had it rooted and guess I had left on ADB was able to install ADB on my laptop and recover my phone!!! Just have to make sure it's always charged
lmt125 said:
Thank you so much!! I thought that was the end of my phone...but good thing I had it rooted and guess I had left on ADB was able to install ADB on my laptop and recover my phone!!! Just have to make sure it's always charged
Click to expand...
Click to collapse
Since I had to do this for myself last month, I thought I'd throw in a couple of little things I gathered from the process.
- My symptoms were that my power button would not 'register'. It had less feedback and gradually grew harder and harder to activate until eventually I couldn't get it to work at all. Other than a couple of small drops, I hadn't put it under any serious stress. I did the cable-boot thing for a while (in combination with a sleep button app), but eventually got tired of it and decided to pop the case open.
- You absolutely need a T5 screwdriver, and they can be a little tricky to find (many driver sets don't go down past T7). Home Depot has a generic driver set that does include a T5 bit. The safe-pry tool is optional (you can use a small, flat screwdriver head if you are _careful_).
- My phone was never serviced, so the third T5 mentioned in the guide is under the VOID sticker at the bottom of the back. Once you take those three screws out, you can use your fingertips to make a gap between the front bevel and the rubber, then pry _gently_ to loosen the clips.
- Once you have released all the clips, the construction of the power button assembly looks like this:
Button -> piece of film -> metal disc (this is the 'spring' mentioned in the guide) -> ring-shaped contact on body
In my case, the film and disc had somehow slipped off-center, making it so that I couldn't make it hit the contacts. In this case, all I had to do was line everything back up again (film over button, disc over contact with concave-ish end facing the contact so it 'springs') and carefully clip it all back together. Now my power button works like it did on day one. Obviously this fix won't work if you actually have a flex cable break, but I have a feeling that most people who don't throw their phones around may have this sort of slippage occurring over time, and the fix might be simpler than you think*!
* - unless you break something disclaimer disclaimer disclaimer
tuxkamen said:
Since I had to do this for myself last month, I thought I'd throw in a couple of little things I gathered from the process.
- My symptoms were that my power button would not 'register'. It had less feedback and gradually grew harder and harder to activate until eventually I couldn't get it to work at all. Other than a couple of small drops, I hadn't put it under any serious stress. I did the cable-boot thing for a while (in combination with a sleep button app), but eventually got tired of it and decided to pop the case open.
- You absolutely need a T5 screwdriver, and they can be a little tricky to find (many driver sets don't go down past T7). Home Depot has a generic driver set that does include a T5 bit. The safe-pry tool is optional (you can use a small, flat screwdriver head if you are _careful_).
- My phone was never serviced, so the third T5 mentioned in the guide is under the VOID sticker at the bottom of the back. Once you take those three screws out, you can use your fingertips to make a gap between the front bevel and the rubber, then pry _gently_ to loosen the clips.
- Once you have released all the clips, the construction of the power button assembly looks like this:
Button -> piece of film -> metal disc (this is the 'spring' mentioned in the guide) -> ring-shaped contact on body
In my case, the film and disc had somehow slipped off-center, making it so that I couldn't make it hit the contacts. In this case, all I had to do was line everything back up again (film over button, disc over contact with concave-ish end facing the contact so it 'springs') and carefully clip it all back together. Now my power button works like it did on day one. Obviously this fix won't work if you actually have a flex cable break, but I have a feeling that most people who don't throw their phones around may have this sort of slippage occurring over time, and the fix might be simpler than you think*!
* - unless you break something disclaimer disclaimer disclaimer
Click to expand...
Click to collapse
Thanks for the input!
I bought a used sensation 4g week or so back. Opened the cover, something fell off, I didn't pay much attention and lost it. By the time I realised it was the spring, it was too late using a light sensor software at the moment to lock/unlock the device.
Is the foil method for the above issue? How can the foil create the spring effect. Hmm I guess I'll have to try out for myself though the sensor is working fine too but this post gives some hope.
OK guys, I'm writing to see if this is normal, but, if you lightly shake your phone side to side do you hear anything slightly moving about up top? Also pop out your Sim and Sim tray and shake again, does it get much louder and sound more loose?
I'm trying to figure out if this is normal and if its just the tray mechanism, or if there is something actually not right with my new phone.
Sent from my LG-D801
Can someone try the above? I suspect it's my Sim card mechanism and Sim card itself. It fits very loosely into the tray.
Sent from my LG-D801
I also hear this. Don't know what it is. Maybe it can multitask as a baby rattle.
Seriously it's probably what you said, but it doesn't affect the functionality. I'm not concerned in the least.
Sent from my LG-D801 using xda app-developers app
If you remove the sim tray you can slide your finger nail between the front and back of phone on the sides to pop the back cover off or use an opening tool like on this video. It will give you a better look to see what's going on with the back off.
LG G2 (D802) How to remove the backcover / Disass…: http://youtu.be/qBrXRs9j5jY
Swizzle82 said:
If you remove the sim tray you can slide your finger nail between the front and back of phone on the sides to pop the back cover off or use an opening tool like on this video. It will give you a better look to see what's going on with the back off.
LG G2 (D802) How to remove the backcover / Disass…: http://youtu.be/qBrXRs9j5jY
Click to expand...
Click to collapse
I never ad any issues with my phone. working at it's best.
That's nice as I've never either, but in the event one feels they might have something loose this is a way they could open the phone to look for themself.
Swizzle82 said:
That's nice as I've never either, but in the event one feels they might have something loose this is a way they could open the phone to look for themself.
Click to expand...
Click to collapse
hmmm. that got me into thinking. hope there will be more information here..