Database Info

Moto X Play (India) Official Marshmallow 6.01 OTA (VoLTE) Download Link

Hi All
Today i am happy to announce release of Moto X Play (India) Official Marshmallow 6.01 OTA (VoLTE) Download Link. This was released by Motorola for Indian Version of Moto X Play Supporting VoLTE Support For Indian Telecom Reliance Jio and includes Android Security Updates 01 May 2016.
Mega - https://mega.nz/#!nBYjgChA!dFu3Mx4cKY1SbShYkjaoSQHR4Sy7vepijBR_QjSD-Ww
This OTA Update can be applied ONLY on Android 6.0.1 Build MPD24.61.52 OR MPD24.107-52/38 and will be updated to Android 6.01 Build MPD24.107-70/51.
==================================================
Filename : Blur_Version.24.61.70.lux_retasia_ds.retasiaall.en.03.zip
MD5 : 283df7f75eecdc9f139a50682d9fe964
SHA1 : 3cee5a7649ebe656fcc86565677254ed57757b97
CRC32 : 5ad1c934
SHA-256 : 8fa6b6f139000e212fc4a33c9b3fb4e04ca2c38c15df62cd22beda1de14a9fd2
SHA-512 : 96476207d79e4a4f65643cca269a93637e406fa6fb34dd022ebed77b54372064cf250d4b48f17ca84f5522a54bc8bacba49c5ee5cf0238d11cfcc1938e59f059
SHA-384 : edc05f62e1fae62ac1a0a29930f6bf5a409f2eb8351d7f189c61bf96f6b1f31e6feef503141c2fba4a62cef99eb4b096
Modified Time : 6/28/2016 11:10:14 AM
Created Time : 6/28/2016 11:09:28 AM
File Size : 20,104,993
File Version :
Product Version :
Identical :
Extension : zip
File Attributes : A
==================================================
Steps To Update
Save the downloaded file to Root of SD Card and follow instructions :
Method 01 [Reported By Many Users]
Just Save the downloaded file to Root of SD Card [External Memory Card and not Internal Memory] and go to Settings --> About Phone --> System Updates. Update will be auto recognized and user will be prompted to apply update. In case update is not recognized and do not get any update prompt, then try Method 02.
Method 02 :
With the phone powered off, press and hold the Volume Down button and the Power button at the same time until the device turns on.
Press the Volume Down button to highlight "Recovery mode"
Press the Power button to restart into Recovery mode.
You'll see an image of an Android robot with a red exclamation mark.
While holding down the Power button, press the Volume Up button.
Phone will auto reboot to Recovery Mode.
Using Volume Down Button highlight Apply update from SD Card and press Power Button.
From the contents of SD Card Listed, using Volume Up / Down button select dowloaded .zip File and press Power Button.
Updatation Process will start. It will take about 30 Mins to complete updatation.
Regards
XDASNR

Does anyone have stock recovery, i cannot update using latest twrp recovery... Or is there any other way please suggest...
Sent from my XT1562 using XDA-Developers mobile app

Unable to update with TWRP
Received the update via OTA, but unable to update as ROM is TWRP. Any solutions?

I'm on 6.0.1 stock, coffee kernel, build MPD24.107-52 and i get error updating via the method 1.
Tried flashing using twrp recovery. Got error 7. Tried method 2. Update gets aborted.

I am on stock ROM and got this update last week.

Will this update work for Single sim EU wariant ?

lokesh.acm said:
I'm on 6.0.1 stock, coffee kernel, build MPD24.107-52 and i get error updating via the method 1.
Tried flashing using twrp recovery. Got error 7. Tried method 2. Update gets aborted.
Click to expand...
Click to collapse
you have to be fully stock(rom, recovery, kernel) to update through OTA.

bablu048 said:
you have to be fully stock(rom, recovery, kernel) to update through OTA.
Click to expand...
Click to collapse
Oh thanks for the info man. I'll have to flash stock firmware now as i saw someone mention wifi problems if just the stock kernel is flashed.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am on build MPD24.107-52 38 stock Rom, TWRP recovery.
I downloaded via OTA , but doesn't install Becoz of custom recovery. Do I forcibly install update thru TWRP via zip?

Para que funcione todo stock, a mi me sirvió. [emoji3]
Enviado desde mi XT1562 mediante Tapatalk

I flashed the stock recovery and stock kernel already with stock rom installed bt then also the flashing is aborted.

maninder singh bali said:
I flashed the stock recovery and stock kernel already with stock rom installed bt then also the flashing is aborted.
Click to expand...
Click to collapse
thats because your /system partition is modufied...on bootloader screen it must shoe stock fpr ota to work....flash the whole firmware again then update..
i did like that (flashing whole formware) then updating, worked perfectly.

caiman_136 said:
Para que funcione todo stock, a mi me sirvió. [emoji3]
Enviado desde mi XT1562 mediante Tapatalk
Click to expand...
Click to collapse
Como la instalas , descargas y flasheas por twrp?
Enviado desde mi XT1562 mediante Tapatalk

During installation of OTA zip update got error..."UPDATER PROCESS ENDS WITH ERROR: 7" In TWRP Recovery mode...

Anyway can we get a TWRP flashable zip?

can't update in TWRP and don't want to re-flash the whole firmware if any other solution please update also please provide the mirror

VoLTE for similar Phone
Can I port this update for Lenovo Vibe X3 by changing files . Because these phone has similar specs . Please any developer Help us.

No por adb el firmware y luego metes el zip y con el recovery original lo instalas.
Enviado desde mi XT1562 mediante Tapatalk

bablu048 said:
thats because your /system partition is modufied...on bootloader screen it must shoe stock fpr ota to work....flash the whole firmware again then update..
i did like that (flashing whole formware) then updating, worked perfectly.
Click to expand...
Click to collapse
Oh ? i have so many apps installed. If i re flash whole firmware again I'll lose those apps and download again.
Thankyou for the information. I'll try this may be.

Can i flash this file in moto x play XT1562 because i got ota update but my mobile is rooted nd used twrp recovery so i can't able to update so please help to update

Downgrade from b320 to b180

Hello i want to downgrade from b320 to b180.
How i can do it?
My phone is totally stock...where i can download b180 firmware?

Unlocked Bootloader is needed
Download your Version here
Download the Huawei Update Extractor http://forum.xda-developers.com/show....php?t=2433454
Extract boot.img, recovery.img, system.img and cust.img with the HuaweiUpateExtractor from the Update.App
Boot your phone into bootloader
Flash the img Files via Fastboot (fastboot flash recovery RECOVERY.img) etc...
or try without unlocking Bootloader
Copy the Update.app in dload Folder
In dialer * # * # 2846579 # * # *
Update from SD Card,this works from B320 to B180,but not from B321 to B180,I have tried it myself,if it does not work try again

letschky said:
Unlocked Bootloader is needed
Download your Version here
Download the Huawei Update Extractor http://forum.xda-developers.com/show....php?t=2433454
Extract boot.img, recovery.img, system.img and cust.img with the HuaweiUpateExtractor from the Update.App
Boot your phone into bootloader
Flash the img Files via Fastboot (fastboot flash recovery RECOVERY.img) etc...
or try without unlocking Bootloader
Copy the Update.app in dload Folder
In dialer * # * # 2846579 # * # *
Update from SD Card,this works from B320 to B180,but not from B321 to B180,I have tried it myself,if it does not work try again
Click to expand...
Click to collapse
I do in fastboot but next to finish flashing when try to restar the Mate only show the screen that say that my phone is not truth .... and no restar

not working here...

davidebelt said:
Hello i want to downgrade from b320 to b180.
How i can do it?
My phone is totally stock...where i can download b180 firmware?
Click to expand...
Click to collapse
which variant ?
Sent from my HUAWEI NXT-L29 using Tapatalk

somboons said:
which variant ?
Sent from my HUAWEI NXT-L29 using Tapatalk
Click to expand...
Click to collapse
i am on c432b320.
But with above the Methode its not working. even with kingtool its not booting after i flashed system,boot,cust &recovery.
I want back to b170 sooo bad.
B320 is not a good choice. apps are freezing (whatsapp, playerpro, threema, fileexplorer) Notification problem is back etc

EGOiST1991 said:
i am on c432b320.
But with above the Methode its not working. even with kingtool its not booting after i flashed system,boot,cust &recovery.
I want back to b170 sooo bad.
B320 is not a good choice. apps are freezing (whatsapp, playerpro, threema, fileexplorer) Notification problem is back etc
Click to expand...
Click to collapse
pls , unlock bootloader + twrp + root
then try to edit ro.build.display=first line of verlist.img from c432B170 after that return recovery to stock then dload b170, try this method first.
if not working , on b320 debrand to c636 then go back to c432 again and edit ro.build.display=first line of verlist.img from c432B170 after that return recovery to stock then dload b170, I am on c636 this method is working very well , I debrand to c432 and back to c636
you can see how to debrand in my thread on general section.
after successful , your bootloader status is locked again.
Sent from my HUAWEI NXT-L29 using Tapatalk

somboons said:
pls , unlock bootloader + twrp + root
then try to edit ro.build.display=first line of verlist.img from c432B170 after that return recovery to stock then dload b170, try this method first.
if not working , on b320 debrand to c636 then go back to c432 again and edit ro.build.display=first line of verlist.img from c432B170 after that return recovery to stock then dload b170, I am on c636 this method is working very well , I debrand to c432 and back to c636
you can see how to debrand in my thread on general section.
after successful , your bootloader status is locked again.
Sent from my HUAWEI NXT-L29 using Tapatalk
Click to expand...
Click to collapse
Thx master. I will try today

somboons said:
pls , unlock bootloader + twrp + root
then try to edit ro.build.display=first line of verlist.img from c432B170 after that return recovery to stock then dload b170, try this method first.
if not working , on b320 debrand to c636 then go back to c432 again and edit ro.build.display=first line of verlist.img from c432B170 after that return recovery to stock then dload b170, I am on c636 this method is working very well , I debrand to c432 and back to c636
you can see how to debrand in my thread on general section.
after successful , your bootloader status is locked again.
Sent from my HUAWEI NXT-L29 using Tapatalk
Click to expand...
Click to collapse
Master, in your Thread "http://forum.xda-developers.com/mate-8/general/huawei-mate-8-stock-firmware-official-t3391727"
Is no Version C432B170. Can i use C636B170 instead?

EGOiST1991 said:
Master, in your Thread "http://forum.xda-developers.com/mate-8/general/huawei-mate-8-stock-firmware-official-t3391727"
Is no Version C432B170. Can i use C636B170 instead?
Click to expand...
Click to collapse
Your variant is C432 , You should use correct variant , but C432 and C636 , they can use instead. Show me your build number, pls

somboons said:
Your variant is C432 , You should use correct variant , but C432 and C636 , they can use instead. Show me your build number, pls
Click to expand...
Click to collapse
Build-# NXT-L29C432B320
or you prefer a Screenshot?
(the backup i wanna roll back later - is named (from twrp) NXTC900B170. but if i cant use this one, its not important. i just wanna go back to b170 or b180) thats all i want.

EGOiST1991 said:
Build-# NXT-L29C432B320
or you prefer a Screenshot?
(the backup i wanna roll back later - is named (from twrp) NXTC900B170. but if i cant use this one, its not important. i just wanna go back to b170 or b180) thats all i want.
Click to expand...
Click to collapse
OK , First try to edit build.prop
- ro.build.display.id=NextL00C432B011 (Unlock bootloader+TWRP+ROOT > Use my tool >7 >10)
- Then return to stock recovery
- Flash any stock rom C432
Report me back

somboons said:
OK , First try to edit build.prop
- ro.build.display.id=NextL00C432B011 (Unlock bootloader+TWRP+ROOT > Use my tool >7 >10)
- Then return to stock recovery
- Flash any stock rom C432
Report me back
Click to expand...
Click to collapse
Thats a really good Guide u write to me there.
I cant get a connection to my phone via your tool. (Waiting for Device)
Even Huawei Suite (fresh installed) cant get a connection to my phone.
But i can enter sd card and phone storage... fastboot works as well.

EGOiST1991 said:
Thats a really good Guide u write to me there.
I cant get a connection to my phone via your tool. (Waiting for Device)
Even Huawei Suite (fresh installed) cant get a connection to my phone.
But i can enter sd card and phone storage... fastboot works as well.
Click to expand...
Click to collapse
in Develop options
- Checking USB Debugging Mode
- Enable OEM unlock too.

somboons said:
in Develop options
- Checking USB Debugging Mode
- Enable OEM unlock too.
Click to expand...
Click to collapse
I can with 100% say its both on.
i try it on my pc home, when i get back from work. maybe thats the problem.
i really appricate your help. and your fast answers!!! thx a lot
(edit: DUDE i cant send you money on your paypal!) it says "Nutzer in Thailand können ausschließlich Zahlungen senden. Der Empfang von PayPal-Zahlungen ist dort derzeit noch nicht möglich."
Translate: User in Thailand only can send money and not recieve. PayPalPayments arent possibily at this moment.

EGOiST1991 said:
I can with 100% say its both on.
i try it on my pc home, when i get back from work. maybe thats the problem.
i really appricate your help. and your fast answers!!! thx a lot
Click to expand...
Click to collapse
OK, 100 % wroking and very safe , I often go back from B321 and debrand to C432B320

somboons said:
OK, 100 % wroking and very safe , I often go back from B321 and debrand to C432B320
Click to expand...
Click to collapse
pls notice my edit in one post above.

I will debrand my mate 8 to C432B320 and make instruction for return back to C432B152.
---------- Post added at 04:18 PM ---------- Previous post was at 04:09 PM ----------
EGOiST1991 said:
I can with 100% say its both on.
i try it on my pc home, when i get back from work. maybe thats the problem.
i really appricate your help. and your fast answers!!! thx a lot
(edit: DUDE i cant send you money on your paypal!) it says "Nutzer in Thailand können ausschließlich Zahlungen senden. Der Empfang von PayPal-Zahlungen ist dort derzeit noch nicht möglich."
Translate: User in Thailand only can send money and not recieve. PayPalPayments arent possibily at this moment.
Click to expand...
Click to collapse
you can donate to me via send money function on paypal.
my email : [email protected]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

somboons said:
I will debrand my mate 8 to C432B320 and make instruction for return back to C432B152.
---------- Post added at 04:18 PM ---------- Previous post was at 04:09 PM ----------
you can donate to me via send money function on paypal.
my email : [email protected]
Click to expand...
Click to collapse
Thanks. Should be on your acc now.
windows cant install the MTP driver... any solution for that case? If not i wait till im home

EGOiST1991 said:
Thanks. Should be on your acc now.
windows cant install the MTP driver... any solution for that case? If not i wait till im home
Click to expand...
Click to collapse
Have you try adb shell ?
screen shot to me.

[Tool] [HuRUpdater] [0.4] [Flash official firmware in recovery

Here I present my tool to flash Honor stock firmware in TWRP recovery. I have tested it on all currently available firmwares for Honor 9 STF but still this tool is beta.
HuRUpdater
Huawei Recovery Updater​
Flash official firmware zip files
Can detect if firmware locks bootloader
Can detect if firmware wipes data
Download:
HuRUpdater_0.4.zip
Tested up to STF-L09C432B369
HuRUpdater_0.3.zip
HuRUpdater_0.2.zip
Tested up to STF-L09C432B362
It's recommended to use a proper custom recovery (with running oeminfo_nvm_server service) like for example my version of TWRP.
How to use:
Warning: Make sure you know what you are doing and do not flash firmware from other devices.
Download firmware files (for official firmware use Huawei Firmware Finder).
Put files you want to flash in a seperate folder on sdcard.
Supported zip files to flash are (name must match):
update.zip (use FullOTA file)
update_all_hw.zip
update_data_public.zip
Optional: Put recovery.img in same folder if you want to keep custom recovery.
Put HuRUpdater zip in same folder. Example:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Select only HuRUpdater to flash in custom recovery.
Follow instructions on screen. Flashing can take multiple minutes.
Problems:
If firmware includes factory reset
Factory reset is not supported by custom recovery. Therefore HuRUpdater will flash stock recovery before launching factory reset. After flashing firmware and doing factory reset, you need to flash recovery manually.
Supported devices:
Honor 9
Honor View 10 (confirmed* by Rommco05)
Huawei P9 Lite (confirmed* by Tecalote)
Huawei P9 (confirmed* by Tecalote)
Huawei P Smart (confirmed* by flibblesan)
Huawei Mate 9 (confirmed* by ante0)
Huawei Mate 10 (confirmed* by Tecalote)
Huawei P20 (confirmed* by realz88)
Honor 8 (confirmed* by [email protected])
Huawei P8 Lite (2017) (confirmed* by neverdies)
Honor 6X (confirmed* by siddhrsh)
Huawei Mediapad M5 (confirmed* by ZeuseZ)
Other Huawei/Honor? Try and let me know
* first confirmation
Bugreport:
Post full /tmp/recovery.log file in comments
Thanks to all testers who report new devices working. Especially big thanks to @Tecalote who provided me with extensive testing / logs and found bugs.
XDA:DevDB Information
HuRUpdater for Honor, Tool/Utility for the Honor 9
Contributors
zxz0O0
Version Information
Status: Beta
Created 2018-03-27
Last Updated 2018-09-23

Reserved
Changelog:
0.4
Add static busybox
Update installer binary
0.3
Fix set_metadata (do not abort)
Add own busybox for recoveries with bugged version
Rename zip files to match HWOTA names
Click to expand...
Click to collapse

very good,
only a question: recovery.img that have put in directory, have to be Stock recovery image orTwrp?

angelobiz said:
very good,
only a question: recovery.img that have put in directory, have to be Stock recovery image orTwrp?
Click to expand...
Click to collapse
Stock recovery.

angelobiz said:
very good,
only a question: recovery.img that have put in directory, have to be Stock recovery image orTwrp?
Click to expand...
Click to collapse
Custom recovery. When you flash stock firmware, the recovery is overwritten. By placing a recovery.img of TWRP in the folder, it will be automatically flashed after stock firmware. Therefore you will keep custom recovery.

Sorry for my bad english.
I'm on Oreo B360 with root and custom twrp (0.2).
Can i use this tool to downgrade to Nougat?
I would like to go back to B183 version...
Inviato dal mio STF-L09 utilizzando Tapatalk

lalaspdn said:
Sorry for my bad english.
I'm on Oreo B360 with root and custom twrp (0.2).
Can i use this tool to downgrade to Nougat?
I would like to go back to B183 version...
Inviato dal mio STF-L09 utilizzando Tapatalk
Click to expand...
Click to collapse
Yes it should work. Downgrading to 183 will format data so make a backup.

Wonderful! It also solves the problems with bricked Honor 9

This tool is amazing. It should be a sticky post. You've no idea how many people will be saved by this tool. Dude, you rock amazingly. Be proud of yourself! It saved me countless hours of flashing, after many hours trying to recover a bricked honor 9... You should post this tool on Reddit with relevant information. It's an amazing tool.

can i use it for flash the stock fw on top the RRoS(android 7.1)?

Amazing tool that will delight more than one

realz88 said:
after many hours trying to recover a bricked honor 9...
Click to expand...
Click to collapse
If you can load to or flash and load to twrp your device is NOT bricked! )) It is very easy to flash zip's of official ROM in this case with or without this tool. This tool is very good by 2 reasons: 1) Can detect if ROM wipes data. 2) Can detect if ROM locks bootloader. It is very convinient! Good job.
PS Your device is bricked if you have error 2 and error 11 when trying to boot. It is not also a problem if you can still reach erecovery.

@zxz0O0 I'm on B360 and want to update to B362 but FF says it's not authorized (all versions say that), so I'd like to know what version you used and what is the danger (if any) of flashing an unauthorized firmware version.

JBolho said:
@zxz0O0 I'm on B360 and want to update to B362 but FF says it's not authorized (all versions say that), so I'd like to know what version you used and what is the danger (if any) of flashing an unauthorized firmware version.
Click to expand...
Click to collapse
Risk of flashing an unauthorized firmware:
None, that's just the relase method Huawei choose https://en.wikipedia.org/wiki/Phased_adoption
Risk of flashing a firmware:
Same as with official way, you could brick / destroy your device if you for example power off during fw flashing.

Rommco05 said:
Hi, this tool is based on nocheck recocery? Im just curious if will work on another devices. Still can't test...
edit: also can be flashed small OTA update instead full OTA?
Click to expand...
Click to collapse
No it's not based on nocheck recovery. I have never tried small OTA files but it could work maybe.

@zxz0O0 Flashed latest B362 (dated March 28th) with no issues, thank you.
By the way, that March 23rd release of B362 has apparently been removed from server (that's what FF was saying on mine)

Great, works fine on Mate 9 (Although got E: Unknown command []] 2 times).
Updated from C432B366 to C432B367-SP1, mainly to test because B367-SP1 is some test firmware.

ante0 said:
Great, works fine on Mate 9 (Although got E: Unknown command []] 2 times).
Updated from C432B366 to C432B367-SP1, mainly to test because B367-SP1 is some test firmware.
Click to expand...
Click to collapse
Thanks for feedback. This error is actually caused on how TWRP interprets the output of the flashable zip. It can be ignored.

Rommco05 said:
Succesfully installed two updates in order BKL-L09C432B140 > BKL-L09C432B141 (both FULL OTA). This is amazing! Just small output, script detect bootloader will be locked but after installation wasn't. Very quick installation.
Click to expand...
Click to collapse
Did you used my version of TWRP for Honor 10?

Rommco05 said:
Yes, v0.3
Click to expand...
Click to collapse
Thank you, that's great! The 0.4 should also work.

[OnePlus 6] How to rebrand your device: from HydrogenOS to OxygenOS and vice versa

After some months i want to explain how to pass from hydrogenOS to OxygenOS and vice versa.
The first thing you need it's the stock rom, you can find here:
XDA Thread
Official OnePlus site (OxygenOS)
Official HydrogenOS site
You have to make sure that the version you are installing is more recent than the one you have on your mobile phone or the process will stop giving you an error, this is because oneplus has blocked the downgrade of the rom (You can also install the same version of the rom ).
At this moment you need to:
Push the stock rom on your internal storage ( in the main folder )
Go in settings/System/System updates/Setting icon on the top right/Local upgrade
Now you should select the stock rom you want to install and then need to click on "Install now"
You need only to wait the process finish to reboot your phone.
After rebooted you need to restore your phone, you can do it through stock recovery or better from Settings/System/Reset Options/Erase All Data (I suggest you include "Erase internal storage").
Now your phone is officially rebranded.
I made a video to explain how to make this local update:
https://www.youtube.com/watch?v=hnXVR2TeyzA
DONATE LINK
If you want to support this and others my projects please consider making a donation, thanks.
​

I can't do this from updater. it gives me error . Do you have some advice for that?
(Do i need unlocked bootloader?)

HackerGames197 said:
I can't do this from updater. it gives me error . Do you have some advice for that?
(Do i need unlocked bootloader?)
Click to expand...
Click to collapse
What are you trying to do? Which method?

mauronofrio said:
What are you trying to do? Which method?
Click to expand...
Click to collapse
I have a oneplus 6T
i'm trying to go from HydrogenOS to OxygenOS using the zip i downloaded from OnePlus site. I tried to flash the zip with updater option you have on the phone but it told me that the zip i'm trying to flash is older than phone version installed. i tried to flash it in recovery but i don't have options to do that. Some guys tried to flash it via the download tool but i don't know if the successed. (I didn't unlock bootloader yet)
(ho visto che sei italiano, se hai telegram potresti darmi una mano a cambiare rom da lì, in modo da avere una comunicazione più veloce? sempre se hai voglia)

HackerGames197 said:
i'm trying to go from HydrogenOS to OxygenOS using the zip i downloaded from OnePlus site. I tried to flash the zip with updater option you have on the phone but it told me that the zip i'm trying to flash is older than phone version installed. i tried to flash it in recovery but i don't have options to do that. Some guys tried to flash it via the download tool but i don't know if the successed. (I didn't unlock bootloader yet)
(ho visto che sei italiano, se hai telegram potresti darmi una mano a cambiare rom? sempre se hai voglia)
Click to expand...
Click to collapse
Yes you can find me like mauronofrio
Mi trovi come mauronofrio

I still can not upgrade to the oxygen os. every time I try the dialogue box that says can not downgrade appers. (i'm going from H2 9.06 to O 9.07.
please help!!

tandukaryajyu said:
I still can not upgrade to the oxygen os. every time I try the dialogue box that says can not downgrade appers. (i'm going from H2 9.06 to O 9.07.
please help!!
Click to expand...
Click to collapse
Try with the oos open beta

Thank you !!
Yes. The beta worked. Does it still update to the next one or do I have to download the next update manually?

tandukaryajyu said:
Yes. The beta worked. Does it still update to the next one or do I have to download the next update manually?
Click to expand...
Click to collapse
Once you are on beta you will receive beta updates .

mixlex said:
Once you are on beta you will receive beta updates .
Click to expand...
Click to collapse
What is the difference? Between the beta and the full version?

Does this work to rebrand from Hos to oos? Thanks.

ma678 said:
Does this work to rebrand from Hos to oos? Thanks.
Click to expand...
Click to collapse
Yes

I just wanted to make sure the dual sim still work after rebranding it.
Thanks.
Sent from my SM-G935W8 using Tapatalk

Is there anyone on hydrogenos? I would like to use h2launcher on oxygenos

Would this work on OP7P?

mauronofrio said:
After some months i want to explain how to pass from hydrogenOS to OxygenOS and vice versa.
The first thing you need it's the stock rom, you can find here:
XDA Thread
Official OnePlus site (OxygenOS)
Official HydrogenOS site
You have to make sure that the version you are installing is more recent than the one you have on your mobile phone or the process will stop giving you an error, this is because oneplus has blocked the downgrade of the rom (You can also install the same version of the rom ).
At this moment you need to:
Push the stock rom on your internal storage ( in the main folder )
Go in settings/System/System updates/Setting icon on the top right/Local upgrade
Now you should select the stock rom you want to install and then need to click on "Install now"
You need only to wait the process finish to reboot your phone.
After rebooted you need to restore your phone, you can do it through stock recovery or better from Settings/System/Reset Options/Erase All Data (I suggest you include "Erase internal storage").
Now your phone is officially rebranded.
I made a video to explain how to make this local update:
https://www.youtube.com/watch?v=hnXVR2TeyzA
DONATE LINK
If you want to support this and others my projects please consider making a donation, thanks.
​
Click to expand...
Click to collapse
Hello. I have a question: I downloaded Oxygen OS 10.0.9 from a XDA Developers link and installed it via local update on a brand new OnePlus 7T HD1900 to flash out the Hydrogen OS 10.0.7 (fresh out of the box) . The device took it successfully without the "downgrading is not allowed" error and I did a reboot after (as the phone prompted after each local update). The reboot time is taking forever (running at about 35 minutes now as of this typing), stuck on the OnePlus circling animation. Is this normal? I'm so nervous right now, I might have bricked my wife's surprise birthday gift. Can you please help? Thank you very much in advance!

Skarrab22 said:
Hello. I have a question: I downloaded Oxygen OS 10.0.9 from a XDA Developers link and installed it via local update on a brand new OnePlus 7T HD1900 to flash out the Hydrogen OS 10.0.7 (fresh out of the box) . The device took it successfully without the "downgrading is not allowed" error and I did a reboot after (as the phone prompted after each local update). The reboot time is taking forever (running at about 35 minutes now as of this typing), stuck on the OnePlus circling animation. Is this normal? I'm so nervous right now, I might have bricked my wife's surprise birthday gift. Can you please help? Thank you very much in advance!
Click to expand...
Click to collapse
Stuck on boot screen means boot loop. You've bricked your phone.

Infinix zero 8 HELP NEEDED

i tried rooting it, flashed magisk patched boot as usual and then it started boot looping. cant flash the original software on it due to secureboot (i think). how do i fix this? how do i bypass this? i saw something about mtk bypass tool or sth like that, but all the tutorials are in hindi which i obv cant understand. any help is welcome, ty.

i saw someone selling a DA file for 5$, and people are selling EFT dongles, could these fix my device? any free solutions?

nvm got it unbricked

kusti420 said:
a nvm desenterrou
Click to expand...
Click to collapse
Olá amigo, estou com o mesmo problema. Fui fazer root através do magisk e agora estou travado na inicialização. Se você conseguiu resolver você poderia me ajudar ??

The stock ROM for Infinix Zero 8 have. Right?!
What I know is: Stock ROM from Infinix need coorect tool like Infinix FlashTool. With that tool you can flash stock ROM (full or partial files). With that you can flash only stock boot.img for device start normally. If not, so flash DOWNLOAD only or FIRMWARE UPGRADE.
The "problem" maybe is not patched_boot.img from magisk. The real question is about other necessary file: vbmeta.img patched with avb2.0.
But you can use the file attached to test. So flash with FlashTool or with adb-fastboot (R30 or next version). I think you unlocked bootloader before any action!
Unzip file; put vbmetaAndroidSC_mod.img file in the FlashTool flashing only vbmeta partition or put vbmetaAndroidSC_mod.img in the platform folder and with cmd write:
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmetaAndroidSC_mod.img
kusti420 said:
i tried rooting it, flashed magisk patched boot as usual and then it started boot looping. cant flash the original software on it due to secureboot (i think). how do i fix this? how do i bypass this? i saw something about mtk bypass tool or sth like that, but all the tutorials are in hindi which i obv cant understand. any help is welcome, ty.
Click to expand...
Click to collapse
English please! You can write in your native languague. But put translated english too!
Hello friend, I have the same problem. I went to root through magisk and now I'm stuck at startup. If you managed to solve it could you help me ??
bigao13 said:
Olá amigo, estou com o mesmo problema. Fui fazer root através do magisk e agora estou travado na inicialização. Se você conseguiu resolver você poderia me ajudar ??
Click to expand...
Click to collapse
Stock ROM:
Infinix ZERO 8 (X687-H851D-Q-OP-200611V100)
Infinix ZERO 8 (X687-H851D-Q-OP-200730V202)
Infinix FlashTool: click me

lopestom said:
The stock ROM for Infinix Zero 8 have. Right?!
What I know is: Stock ROM from Infinix need coorect tool like Infinix FlashTool. With that tool you can flash stock ROM (full or partial files). With that you can flash only stock boot.img for device start normally. If not, so flash DOWNLOAD only or FIRMWARE UPGRADE.
The "problem" maybe is not patched_boot.img from magisk. The real question is about other necessary file: vbmeta.img patched with avb2.0.
But you can use the file attached to test. So flash with FlashTool or with adb-fastboot (R30 or next version). I think you unlocked bootloader before any action!
Unzip file; put vbmetaAndroidSC_mod.img file in the FlashTool flashing only vbmeta partition or put vbmetaAndroidSC_mod.img in the platform folder and with cmd write:
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmetaAndroidSC_mod.img
English please! You can write in your native languague. But put translated english too!
Hello friend, I have the same problem. I went to root through magisk and now I'm stuck at startup. If you managed to solve it could you help me ??
Stock ROM:
Infinix ZERO 8 (X687-H851D-Q-OP-200611V100)
Infinix ZERO 8 (X687-H851D-Q-OP-200730V202)
Infinix FlashTool: click me
Click to expand...
Click to collapse
idk i saw that infinix flash tool as well but it didnt work at all for me. i kept using sp flash tool.
and i solved that problem a long time ago already using mtk-bypass utility

lopestom said:
The stock ROM for Infinix Zero 8 have. Right?!
What I know is: Stock ROM from Infinix need coorect tool like Infinix FlashTool. With that tool you can flash stock ROM (full or partial files). With that you can flash only stock boot.img for device start normally. If not, so flash DOWNLOAD only or FIRMWARE UPGRADE.
The "problem" maybe is not patched_boot.img from magisk. The real question is about other necessary file: vbmeta.img patched with avb2.0.
But you can use the file attached to test. So flash with FlashTool or with adb-fastboot (R30 or next version). I think you unlocked bootloader before any action!
Unzip file; put vbmetaAndroidSC_mod.img file in the FlashTool flashing only vbmeta partition or put vbmetaAndroidSC_mod.img in the platform folder and with cmd write:
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmetaAndroidSC_mod.img
English please! You can write in your native languague. But put translated english too!
Hello friend, I have the same problem. I went to root through magisk and now I'm stuck at startup. If you managed to solve it could you help me ??
Stock ROM:
Infinix ZERO 8 (X687-H851D-Q-OP-200611V100)
Infinix ZERO 8 (X687-H851D-Q-OP-200730V202)
Infinix FlashTool: click me
Click to expand...
Click to collapse
thank you friend, i will try

kusti420 said:
idk eu vi essa ferramenta de flash infinix também, mas não funcionou para mim. Continuei usando a ferramenta flash sp.
e eu resolvi esse problema há muito tempo já usando o utilitário mtk-bypass
Click to expand...
Click to collapse
obrigado amigo

can anyone share infiniz zero 8 boot.img of this version X687-H851D-Q-OP-210223V454?please i flashed earlier build and now my wifi and bluetooth is not working

ahsans2000 said:
can anyone share infiniz zero 8 boot.img of this version X687-H851D-Q-OP-210223V454?please i flashed earlier build and now my wifi and bluetooth is not working
Click to expand...
Click to collapse
there's the rom for this phone online just download it

kusti420 said:
there's the rom for this phone online just download it
Click to expand...
Click to collapse
can u send me the link?

ahsans2000 said:
can u send me the link?
Click to expand...
Click to collapse
just google ffs, literally the first thing that pops up and cmon lets be honest if youre unable to even download the rom then im 100% sure that you wont be competent enough to use mtk-bypass utility to even be able to flash that boot.img that you wanted to do

kusti420 said:
just google ffs, literally the first thing that pops up and cmon lets be honest if youre unable to even download the rom then im 100% sure that you wont be competent enough to use mtk-bypass utility to even be able to flash that boot.img that you wanted to do
Click to expand...
Click to collapse
I HAVE FLASHED BOOT.IMG , RECOVERY.IMG AND SYSTEM.IMG = STILL IN BOOTLOOP
AND I ALREADY HAVE SCATTER VERSION OF FIRMWARE , BUT I WANTED TO GET FACTORY SIGNED VERSION TO BE ABLE TO FLASH THROUGH FASTBOOT

A
kusti420 said:
just google ffs, literally the first thing that pops up and cmon lets be honest if youre unable to even download the rom then im 100% sure that you wont be competent enough to use mtk-bypass utility to even be able to flash that boot.img that you wanted to do
Click to expand...
Click to collapse
AND I HAVE ALREADY BYPASSED SECURED BOOT , BUT SP FLASH TOOL IS NOT WORKING= ASKING AUTH FILE , I'M GIVING IT AN AUTH FILE FROM HOVATEK BUT STILL CMD FAIL ERROR

ahsans2000 said:
A
AND I HAVE ALREADY BYPASSED SECURED BOOT , BUT SP FLASH TOOL IS NOT WORKING= ASKING AUTH FILE , I'M GIVING IT AN AUTH FILE FROM HOVATEK BUT STILL CMD FAIL ERROR
Click to expand...
Click to collapse
you clearly arent doing it correctly then if it aint working. it worked perfectly fine for me

ahsans2000 said:
A
AND I HAVE ALREADY BYPASSED SECURED BOOT , BUT SP FLASH TOOL IS NOT WORKING= ASKING AUTH FILE , I'M GIVING IT AN AUTH FILE FROM HOVATEK BUT STILL CMD FAIL ERROR
Click to expand...
Click to collapse
and the whole point of mtk-bypass utility is to be able to flash without auth file. if you were to do it correctly it shouldnt even ask for it. idk how youre trying to flash it but did you set everything up correctly?
maybe you find this tutorial helpful:

I followed the tutorial but the spflash doesn't pass the download da

kusti420 said:
and the whole point of mtk-bypass utility is to be able to flash without auth file. if you were to do it correctly it shouldnt even ask for it. idk how youre trying to flash it but did you set everything up correctly?
maybe you find this tutorial helpful:
Click to expand...
Click to collapse
I followed the tutorial but the spflash doesn't pass the download da

Tr00zin said:
I followed the tutorial but the spflash doesn't pass the download da
Click to expand...
Click to collapse
did bypass utility disable secureboot or whatever? it should work, and it did work for me at least

kusti420 said:
did bypass utility disable secureboot or whatever? it should work, and it did work for me at least
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}