I just bought a new January 2019 Head Unit from Sygav China Took 8 days to arrive by USPS
This Unit for any Toyota Rav4 2013-2017
Manufacturer: Hot-Audio / Dasaita
Sold in US by: SYGAV via eBay
Sold in China by: Dasaita via Aliexpress
Pure Android 8.0 Oreo Operation System
- CPU Processor: Rockchip PX5 Octa-Core ,64-Bit Coretex A53
- RAM Space: SAMSUNG DDR3, 4GB
- Memory: 32GB
I have 4 questions.
The Factory Backup Camera on this Rav4 Hybrid 2017 is 1080p,
The firmware from this PX5 Unit only allows to display 420p for backing up display and not the true 1080p
The firmware from this unit as strange AM Radio increments and doesnt allow to show 1130AM
The firmware doesnt allow to install newly Google Playstore apps like Netflix
I was able to install Netflix older version 4.16 which i hate because on the New current Netflix Version, it allow you to download movies and tv shows to play and watch later when there is no wifi.
Is there a newer Firmware for this so its fixes the backup camera headunit software resolution
Is there a better radio software for the unit that has the am frequency fix so i can listen to the news and traffic radio report
Is there a Firmware that addresses and fixed Am radio frequency that allows people to manually input the channel by digits or find 1130am
Is there a Firmware that allows me to install the current new Netflix APK?
Is there a Firmware that allows me to set the display brightness to a higher brightness?
besides that above issues, This is really a huge upgrade from the Toyota factory HDradio that is a piece of **** and useless Entune.
This stereo sounds just as great as a Kenwood and Alpine new stereo, Sound is a Huge improvement and bettter bass.
Love the android features including able to set it the way i like and has a better GPS Map than Toyota **** hole Nav Maps.
I dont have any lag or pause issues, responds quickly with my apps APK
any help from the community here would be greatly helpful, its runs on the PX5 platform
love to know how to get 1130am, the FM and Am radio scan is terrible as it just passes all the high signal stations and cant seem to get 1130am , the slider is useless as it skips channels frequencies also .
Mal in Vancouver Canada
here is the unit i bought from Ebay, if anyone bought the same one and has the fix . the Ebay item is 202266435549
I have a one year old 7" Dasaita PX5 4GB RAM, Android 8, which performs flawlessly. Even the Blootooth and MIC volume level issue was solved in this unit, it has configured Bluetooth WD-BC6.
I wanted to upgrade to DSP, so instead of removing componentes and soldering wires , I just bought in Ali Express Dasaita Official Store the Dasaita MCU board with DSP:
https://es.aliexpress.com/item/32965198383.html?spm=a2g0s.9042311.0.0.6de363c0vGoD1p
After installation on new MCU board, everything is working fine, except Bluetooth, which is not working, if I go to FACTORY SETTINGS, (Password 126) I can select different Bluetooth Adapters, like: MD725, WQ_BC5, WQ_BC6, WQ_BC8, Parrot_FC6000T, SD-968, SD-BC6, SD-GT936, IVT-i145, SD-8350
But after trying several of them, Bluetooth is still not working. Dues anybody know which one I should select.
etulio said:
I have a one year old 7" Dasaita PX5 4GB RAM, Android 8, which performs flawlessly. Even the Blootooth and MIC volume level issue was solved in this unit, it has configured Bluetooth WD-BC6.
I wanted to upgrade to DSP, so instead of removing componentes and soldering wires , I just bought in Ali Express Dasaita Official Store the Dasaita MCU board with DSP:
https://es.aliexpress.com/item/32965198383.html?spm=a2g0s.9042311.0.0.6de363c0vGoD1p
After installation on new MCU board, everything is working fine, except Bluetooth, which is not working, if I go to FACTORY SETTINGS, (Password 126) I can select different Bluetooth Adapters, like: MD725, WQ_BC5, WQ_BC6, WQ_BC8, Parrot_FC6000T, SD-968, SD-BC6, SD-GT936, IVT-i145, SD-8350
But after trying several of them, Bluetooth is still not working. Dues anybody know which one I should select.
Click to expand...
Click to collapse
what BT module does your new unit have?
I did not check the Bluetooth module and I mounted the unit in the car. I took pictures of the board, but they do not show the BT model. So to check it physically I would have to disassembly again. To save this step, I was asking here just in case somebody has this MCU and knows the anser. But looks like I'll have to dissassembly.
Finally, I removed the new unit to check the BT, and it ios as follows:
The BT card in the "old" (one year old) board is:
Silk Marks in the back of the PCB: GOC-MD-705D
Paper label on top of QFP IC (Probably FW version and date) = A5BC6 1907
To have it working I selected in HU Factory Settings : WQ_BC6
The BT in the new MCU with DSP is smaller (shorter) and marks are:
Silk Marks in the back of the PCB: GOC-RF210 2019.04.27
There are no FW labels in the ICs on Top side of the PCB
What do I have to select to have it working?
In Factory configuration, the available BT optios are:
MD725
WQ_BC5
WQ_BC6
WQ_BC8
Parrot_FC6000T
SD-968
SD-BC6
SD-GT936
IVT-i145
SD-8350
I am attaching pictures of Old and New BT boards.
MCU has the latest FW 3.37, but PX5 has Android 8.0 one year old.
etulio said:
Finally, I removed the new unit to check the BT, and it ios as follows:
The BT card in the "old" (one year old) board is:
Silk Marks in the back of the PCB: GOC-MD-705D
Paper label on top of QFP IC (Probably FW version and date) = A5BC6 1907
To have it working I selected in HU Factory Settings : WQ_BC6
The BT in the new MCU with DSP is smaller (shorter) and marks are:
Silk Marks in the back of the PCB: GOC-RF210 2019.04.27
There are no FW labels in the ICs on Top side of the PCB
What do I have to select to have it working?
In Factory configuration, the available BT optios are:
MD725
WQ_BC5
WQ_BC6
WQ_BC8
Parrot_FC6000T
SD-968
SD-BC6
SD-GT936
IVT-i145
SD-8350
I am attaching pictures of Old and New BT boards.
MCU has the latest FW 3.37, but PX5 has Android 8.0 one year old.
Click to expand...
Click to collapse
Good post, an example of what information to post. Also good /must to know MCU version and that you have upgraded it to the latest available.
Unfortunately I still dont know what BT module you have - it might be a new model or compatible with one of the others lists, or it might require new firmware. Have you tried cycling through all of the MCU BT options, restarting in between? Also try reviewing logcats for BT detected type.
Hi, thank you for your help.
MCU PCB is the latest one: HA-D6100-MAIN VER 0.1 20190701, that integrates a DSP board. MCU FW version is the latest one from Dasaita, MCU 3.37. I tried cycling all MCU BT options with restarting in between, but without success. I do not know how to check Android BT logs.
I purchased this MCU PCB in Aliexpress Dasaita Official Store and I send messages asking for support, but I got no answer. I had to open a dispute to get an answer from Dasaita, now they say that they will send a new BT module, but if the real problem is the lack of support by MCU FW, this new module will not fix the issue.
BT Module and MCU PCB are very new, so probably they will release soon a new MCU FW that will support it, but the Dasaita support
Still not working
etulio said:
Still not working
Click to expand...
Click to collapse
Hello. I had a similar problem. Today I solved it. With the help of seller Dasaita on Aliexpress, I found out that the motherboard has a fresh Bluetooth chip installed. As the seller says installed RF210 Bluetooth 5.0 chip, which is not supported by Android 8. Therefore, all you need to do is install Recovery Android 9, then the firmware with Android 9, and then in the Factory Setting, in the Bluetooth settings on the first tab, select RF210 (it will be added to the list, on Android 8 it simply does not exist). That's all. Everything worked for me. The sound is better than it was on the old Bluetooth chip.
555sssaaa said:
Hello. I had a similar problem. Today I solved it. With the help of seller Dasaita on Aliexpress, I found out that the motherboard has a fresh Bluetooth chip installed. As the seller says installed RF210 Bluetooth 5.0 chip, which is not supported by Android 8. Therefore, all you need to do is install Recovery Android 9, then the firmware with Android 9, and then in the Factory Setting, in the Bluetooth settings on the first tab, select RF210 (it will be added to the list, on Android 8 it simply does not exist). That's all. Everything worked for me. The sound is better than it was on the old Bluetooth chip.
Click to expand...
Click to collapse
Thanks for taking the time, your explanation solves the puzzle. Good to know they finally have an updated BT option, wonder if they improved the code/drivers.
I will add links. I installed Recovery and Android 9 according to the instructions Hal9k. Hal9k, thank you very much!
Link to his Mod - h t t p://4pda.ru/forum/index.php?showtopic=973606&st=0#entry91199154
Link to Recovery for Android 9 - h t t p://4pda.ru/forum/index.php?showtopic=883219&st=24080#entry84508631
The link to the instructions for installing Recovery - h t t p://4pda.ru/forum/index.php?showtopic=891403&st=540#Spoil-77218289-3
Probably on this forum there is a description of the upgrade from Android 8 to Android 9. But I rarely come here. I just saw a problem similar to mine and want to share its solution. I hope this helps someone.
Hello,
I have the PX6 (Adroid 9) with the RF210 BT module, but it doesn't work at all. I've installed the latest MCU and the one before that (MCU 3.45 then MCU 3.53).
I also installed the latest firmware update (20200521). In the end I also installed Hal9k mod, and it still doesn't work.
Does your BT work?
RupOase said:
Hello,
I have the PX6 (Adroid 9) with the RF210 BT module, but it doesn't work at all. I've installed the latest MCU and the one before that (MCU 3.45 then MCU 3.53).
I also installed the latest firmware update (20200521). In the end I also installed Hal9k mod, and it still doesn't work.
Does your BT work?
Click to expand...
Click to collapse
No, it did not work. But I did not try to install Android 9, mine was at Android 8.
SD-BC6
Hi,
I have tried all the BT setting and for me finally working SD-BC6 (PX5 with Android 9 Malaysk mod) . Finally means that my mobile can connect and working and ODB2 module can connect and working. All others setting worked only for mobile or only for ODB2 or not worked at all.
Hi,
I was wondering if I could get some help with my issue. I bought an Erisin ES8049U head unit that I am trying to connect to my cars after market engine management system via Bluetooth. The head unit discovers the engine management system but it's quite troublesome to connect to it. Sometimes it connects, sometimes it doesnt. The Bluetooth connection to the cars engine management unit works fine from my Samsung mobile, so the problem is in the Erisin head unit.
Also when I finally get it to connect, no data comes through to the engine management system, it's like its not even connected and sometimes it flashes connected/disconnected.
Here are the info on the system:
PX5
Android 9
Build: rk3368-userdebug 9PQ2A. 190305.002 20191113.183229 test-keys
Kernel: 4.4.167
MCU: MTCE_LM_V3.43_1 / DEC 17.2019
CPU: Octa-core Cortex-A53 @ 1.5G
BT chip that has been selected in the system by default is: SD-8350
I've read some of the BT connectivity issues and they mostly have had different BT chips installed, at least originally. Any idea which chip I could test from the list, or is there a MCU that would fix connectivity issues? Or any other things I could do?
2JZHX60 said:
Hi,
I was wondering if I could get some help with my issue. I bought an Erisin ES8049U head unit that I am trying to connect to my cars after market engine management system via Bluetooth. The head unit discovers the engine management system but it's quite troublesome to connect to it. Sometimes it connects, sometimes it doesnt. The Bluetooth connection to the cars engine management unit works fine from my Samsung mobile, so the problem is in the Erisin head unit.
Also when I finally get it to connect, no data comes through to the engine management system, it's like its not even connected and sometimes it flashes connected/disconnected.
Here are the info on the system:
PX5
Android 9
Build: rk3368-userdebug 9PQ2A. 190305.002 20191113.183229 test-keys
Kernel: 4.4.167
MCU: MTCE_LM_V3.43_1 / DEC 17.2019
CPU: Octa-core Cortex-A53 @ 1.5G
BT chip that has been selected in the system by default is: SD-8350
I've read some of the BT connectivity issues and they mostly have had different BT chips installed, at least originally. Any idea which chip I could test from the list, or is there a MCU that would fix connectivity issues? Or any other things I could do?
Click to expand...
Click to collapse
OK, I got it to show the data from the engine managament unit when I disabled Wireless and after that it started connecting. But if I restart the car, it doesnt want to connect to the application. With my phone it works flawlessly. I wonder if it's an application error or something to do with the head unit.
I bought an Android 10 4 / 64GB DSP radio, connected it, added cameras and everything works. I coded with Star Diagnose so that it would not take the time from the GPS and the only problem that appeared was the watch in the odometer was set to 01:07 after waking up the radio.
When I unplug the canbus decoder - clock does not reset. But I would like to have a canbus because it shows some extra features
- steering wheel control
- open door signaling
- radio sleep mode
- cameras in reverse gear etc.
I wrote to the seller, but only what the MCU update gave, but it didn't help.
I currently have
MCU version: MTCE_GS_V3.67_1
Build number: RK3368-userdebug 10 QQ2A.200305
I have questions for you and requests for comments
- Has anyone encountered such a problem?
- Is there a new version of the MCU that I can upload if so what?
- Is there a new build version
I'd like to try to update, it probably won't help, but it's always worth a try.
visera_de said:
I bought an Android 10 4 / 64GB DSP radio, connected it, added cameras and everything works. I coded with Star Diagnose so that it would not take the time from the GPS and the only problem that appeared was the watch in the odometer was set to 01:07 after waking up the radio.
When I unplug the canbus decoder - clock does not reset. But I would like to have a canbus because it shows some extra features
- steering wheel control
- open door signaling
- radio sleep mode
- cameras in reverse gear etc.
I wrote to the seller, but only what the MCU update gave, but it didn't help.
I currently have
MCU version: MTCE_GS_V3.67_1
Build number: RK3368-userdebug 10 QQ2A.200305
I have questions for you and requests for comments
- Has anyone encountered such a problem?
- Is there a new version of the MCU that I can upload if so what?
- Is there a new build version
I'd like to try to update, it probably won't help, but it's always worth a try.
Click to expand...
Click to collapse
Hello. i have the same problem. same Viano 2005. Did you manage to solve this problem? Thank you
Hello, all good people, professionals, beginners. I am Slovak for the introduction and therefore your language is not my natural so I apologize in advance. What i can't write, translate in google.
I have audi a3 12.2009 sportback gen2. My original radio 8P0035186P.
Air condition 8P0820043BH
Central electrics 8P0907279N
Gateway 1K0907951
Parking assitance 8P0919475B
Steering assistance 1K0909144C
Dashboard 8P0920931T
I buy android head unit px5 1024x600 rk3368 A10 octa core cortex-a53 2gb ram 32gb rom. (mtce_chs_v3.67_1 Nov 7 2020) (core 4.19.111+ Nov 23 2020) Canbus decoder CHS 20201201 A3/A4/TT HW:v3 SW:v1.
What works: steering wheel control, day / night mode change via sensor, battery/alt voltage - that is all. Used CANBUS protocol audi A3 simple 1/2 gen in factory settings.
I have the following problems and questions: The car does not communicate with the radio at all. Radio does not display vehicle management, applications or something for any communication between the vehicle and the unit. When I change the canbus protocol to golf7 or high class audi in factory settings, will be displayed after restart - vehicleapp and controlsettingsapp. When I run the application in canbus golf, turns on but everything is unavailable. As a layman i tried to pull the app from canbus golf7 to my audi a3 simple canbus and install. The application will install, but stop immediately. What I'm doing wrong or where I should look for a mistake according to you? Why I don't have these applications there at canbus a3 simple?
I called Audi support and I asked them supports my vehicle these things: Parking radar/assistant, open doors, air conditioning, tpms and more.. They said yes but only if you have rns-e radio. Rns-e dont have bluetooth and other good staff so i buy this and I am unhappy. I use obdeleven when I turn on a function, for example parking ilustration the function will disappear from my dashboard and for me logically sends the sensor control to the radio. But no and why? it's radio too waste or audi just can't do it? I will answer every question by attaching any file ask anything.