Hello,
I have a perfectly working moto G 4g with cyanogenmod, and did the install very easily the first time. I am stoked with it so when my mother asked me for a new phone I got another MotoG 4G, and went directly to install TWRP and cyanogenmod... BUT :
- when I want to flash Cyanogenmod build zip, TWRP tells me the version is not supported by this cyanogen build.... apparently it wants version 0x411A and nothing else. The only version available on TWRP website is the newest 0.3.2.0 ....
- I have tryed another twrp version found online (a 2.7.8 not official) and it fails again to install Cyanogenmod, saying the TWRP version is not correct.
Where can I get the correct 0x411A version of TWRP ? Or is the message actualy is about something else ?
Best regards and thanks in advance for your help.
I was confusing Bootloader version and TWRP version. I used a tool found on XDA that has updated my bootloader.
Then i was able to install cyanogenmod but was stuck on the logo for the first boot.
Updated TWRP to the latest one and trying again, flashed darvin cache, and i am flashing nightly cyanogen+gapps.
I hope it'll work this time
Hi!
My shieldtablet is running CM 12.1 (latest 20160807 build)... That works fine. It has latest TWRP 3.0.2-2 installed. And latest open GAPPS 5.1 (mini arm).
I am trying to get it to run CM 13 I've tried the first builds... didn't work... I tried today with the very latest nightly build 20160909... I do this by booting to recovery (TWRP 3.0.2-2) then going to install, and installing cm-13-20160909-NIGHTLY-shieldtablet.zip, and also open_gapps-arm-6.0-mini-20160912.zip (using the install multiple ZIPs feature of TWRP). Then I wipe DAVIK and cache and reboot.
Device stays forever at the nvidia logo.
I turn it off. Boot to recovery, reinstall CM 12.1 and opengapps 5.1 with same process... and that works fine. Machine reboots like a charm.
Any idea if I am missing a step? And what step that would be?
Thanks in advance,
Gilles.
Have you done the firmware update?
http://forum.xda-developers.com/shi...-cyanogenmod-12-shield-tablet-lte-na-t3055043
Firmware Update:
If you have not installed the latest stock ota, then some firmware files need updated. The following flashable zips will update the bootloader and the dtb corresponding with the listed stock version. Only the latest one listed here will be supported by recent CM builds.
3.1.1 (L)
4.2.0 (M)
Ah... No. I'm confused, though. What's the difference between L and M files? Do I need to flash both? Or just one?
I'm running CM 12.1 (Android 5.1.1 Lollipop)... So I could imagine having to flash L? But since I'm updating to 6.0.1... Would that mean M?
I imagine I download the ZIP, boot into TWRP, flash the right version. Then flash CM 13. Then flash Open GAPPS?
Or in a different order?
Thanks,
Gilles
I'm on stock, so it's just a shot in the dark - but i think this sounds logical:
L - Lollipop - 5.x, flash this when you are on 13.0 and want back to 12.1
M - Marshmallow - 6.x, flash this when you are on 12.1 and want flash 13.0
and then cm + gapps of course
regards,
wakko
All in one shot? Boot to TRWP, flash M, CM, GAPPS then reboot?
Hopefully - you'll only find out, when you try
So... that's exactly what I did, and it worked.
So steps : log into the SHIELD (CM 12.1 / Android 5.5.1)
Reboot to recovery (configured advanced reboot in developer options)
From recovery, selected the M drivers, then added the CM 13 zip, then added the Open GAPPS (6.0 ARM MINI) ZIP.
Then clicked FLASH
Then rebooted (I was impatient, didn't think to clear DALVIK and cache).
Machine rebooted and all seems well (SD card was detected and I said use as portable storage, Avast asked for a few more permissions, only Viber got confused and requires relinking to mobile account).
All nice.
One issue is that the lock screen doesn't follow device rotation. It stays configured for portrait mode. Once I log in, and get to the main launcher screen, then the screen orientation properly follows device rotation.
ggravier said:
One issue is that the lock screen doesn't follow device rotation. It stays configured for portrait mode. Once I log in, and get to the main launcher screen, then the screen orientation properly follows device rotation.
Click to expand...
Click to collapse
That default changed in cm13. Dunno if it was an aosp change or cm. You can toggle it back on under settings->display->rotation.
Steel01 said:
That default changed in cm13. Dunno if it was an aosp change or cm. You can toggle it back on under settings->display->rotation.
Click to expand...
Click to collapse
Thanks! Solved! So far, I love it!
ggravier said:
Thanks! Solved! So far, I love it!
Click to expand...
Click to collapse
I am having the exact same issues as OP. Not tried this fix yet, but seems promising. Question is, does any of those L or M files wotk with Nougat? or is there one for that too?
Twrp recovery is not working after flashing cm14.1 so i removed cyanogenmod and flashed remix but still twrp is not working , only cyanogenmod recovery is working on my oneplus 3 in either situation of the two.
Eyaday said:
Twrp recovery is not working after flashing cm14.1 so i removed cyanogenmod and flashed remix but still twrp is not working , only cyanogenmod recovery is working on my oneplus 3 in either situation of the two.
Click to expand...
Click to collapse
You need the modded TWRP by @eng.stk
Thanks a lot.you solved my problem
Hello
Strange think for me, maybe not for you
I switch from carbon 8 and came back to lineage 16.
I'm not able to achieved installation with latest lineage 16, lineage microG or lineage17. Flashing the new rom works well, but after lineage home screen, the phone reboot to recovery.
With an lineage16 old version from 03/2019,install is ok and phone boot well.
I've suspected an old twrp version, but I'm on 3.3.1.0.
Any idea ?
thank you
it's the same with an old twrp version 3.2.
Ok, solved. You shouldn't install twrp as an app before rebooting to new os version.
So I tried to install a custom rom on GT-N8010.
Used Odin to flash ClockworkMod and TWRP.
I wiped cache and system.
Then I Intalled LineageOS 16.0 + Gaps: Some error while installing, so the instalation was aborted.
LineageOS 15.0/ResurectionRemix/SlimRom+GApps the instalation went fine. But on every one of these Roms the tablet is stuck in the bootscreen of the rom.
Between them I wiped cache and system.
Does someone have an idea what wnet wrong?
You need to read roms instructions .
Clockwork MOD No and use correct TWRP versions .
Thank you for the answer. But can you tell me/or send me a link, where I can read up on how to fix the tablet?
I could set up my windows machine in the sleep, but android, if they where asking me I would still use windows phone.
https://forum.xda-developers.com/galaxy-note-10-1/development/rom-lineageos-16-0-t4182187
TWRP versions .
JJEgan said:
https://forum.xda-developers.com/galaxy-note-10-1/development/rom-lineageos-16-0-t4182187
TWRP versions .
Click to expand...
Click to collapse
I used the correct TWRP Version and installed Lineage OS 16.0 and Gapps Pico, I wanted to boot the tablet and I saw the Lineage Logo and after a while it sent me straight back to TWRP.
I'm a bit baffelded.