I am new to Huawei devices, the P9 is my first device, so trying to get Xposed to work on it, i noticed that we need to disable the theming engine.
I digged a little into this engine sources and it seems the required change is simple, so here is a test version that should support it with no need to disable the theming props:
Code:
ro.config.themecolor
ro.config.hwtheme
ro.config.hw_theme
Try it and report back if there are any remaining issues.
Download. (Tested with my P9)
Updated here.
I need to test this on my other devices (GS7/Nexus5X), just to make sure there are no regressions, then i will do a pull request to rovo89's repo.
Its working fine with P8 Marshmallow.
Nice to see you here. Maybe you know me from note 2 forums a few years ago.
Blackball said:
Its working fine with P8 Marshmallow.
Nice to see you here. Maybe you know me from note 2 forums a few years ago.
Click to expand...
Click to collapse
Nice to see you here too.
I posted a newer update here.
v85.1(30/05/2016):
- Add Huawei theming engine support (details).
- Ensure the recompilation on Huawei EMUI Roms (details).
So with this build we don't need the ro.config entries in build.prop?
colthekid said:
So with this build we don't need the ro.config entries in build.prop?
Click to expand...
Click to collapse
yes
---------- Post added at 04:05 AM ---------- Previous post was at 04:03 AM ----------
V85.1 works good so far :good::good: thanks for your great job
without Xposed I hate any Android device
thx a lot Wanam, works great (v85.1)!
info for other people: You need the x64 version for the P9.
Works like a charm on the P9
Thanks Wanam
get into bootloop with v85.1 on mate 8 Emui 4.1
tried also with build.prop entrys ... also no luck
Gesendet von meinem HUAWEI NXT-L29 mit Tapatalk
MultiCulti said:
get into bootloop with v85.1 on mate 8 Emui 4.1
tried also with build.prop entrys ... also no luck
Gesendet von meinem HUAWEI NXT-L29 mit Tapatalk
Click to expand...
Click to collapse
Please read this before reporting a bug: https://github.com/rovo89/XposedBridge/wiki/Bugs
Sent from my EVA-L09 using Tapatalk
@wanam
Definitely works on Mate 8 with 4.1. Only had to force a reboot using power button. That's not a problem of your build, it happened with Rovo's builds several times, too.
Great work!!! Many thx to you.
pappschlumpf said:
@wanam
Definitely works on Mate 8 with 4.1. Only had to force a reboot using power button. That's not a problem of your build, it happened with Rovo's builds several times, too.
Great work!!! Many thx to you.
Click to expand...
Click to collapse
Why do you need to force reboot?
Sent from my EVA-L09 using Tapatalk
Works like a charm on p9 . Thanks a lot.
Отправлено с моего EVA-L09 через Tapatalk
Hi!
Hello!
Actually your xposed works fine. I have customized icons in the status bar etc, but doesn't change the theme's icons. The gold one for example. Can u try it? I don't have any particular modul...
wanam said:
Why do you need to force reboot?
Sent from my EVA-L09 using Tapatalk
Click to expand...
Click to collapse
Sometimes the Mate is not booting up with xposed. The screen stays bright. If it is booting the Mate reduces screen brightness after some seconds. I've experienced the same behavior with the Note 4 too for example. Sometimes it needed a forced reboot to boot up. Not a big deal, it happens 1 of 20 boots or something like that. As said it is happening with original build too.
Gesendet von meinem Huawei Mate 8
rikiki81 said:
Hello!
Actually your xposed works fine. I have customized icons in the status bar etc, but doesn't change the theme's icons. The gold one for example. Can u try it? I don't have any particular modul...
Click to expand...
Click to collapse
Which module did you use to change the status bar icons?
Nothing. If theme engine works the icons in the status bar are different. For example health's icons is smoother...
Inviato dal mio EVA-L09 utilizzando Tapatalk
rikiki81 said:
Hello!
Actually your xposed works fine. I have customized icons in the status bar etc, but doesn't change the theme's icons. The gold one for example. Can u try it? I don't have any particular modul...
Click to expand...
Click to collapse
I tried many themes with no issues, post your xposed logs to make sure it's not a theming engine issue.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
pappschlumpf said:
Sometimes the Mate is not booting up with xposed. The screen stays bright. If it is booting the Mate reduces screen brightness after some seconds. I've experienced the same behavior with the Note 4 too for example. Sometimes it needed a forced reboot to boot up. Not a big deal, it happens 1 of 20 boots or something like that. As said it is happening with original build too.
Gesendet von meinem Huawei Mate 8
Click to expand...
Click to collapse
A logcat should help in this case.
The Note4 issue was related to Knox/secure storage and i remember it was fixed by disabling secure storage.
Sent from my EVA-L09 using Tapatalk
wanam said:
I tried many themes with no issues, post your xposed logs to make sure it's not a theming engine issue.
A logcat should help in this case.
The Note4 issue was related to Knox/secure storage and i remember it was fixed by disabling secure storage.
Sent from my EVA-L09 using Tapatalk
Click to expand...
Click to collapse
If it comes up again i'll grab a logcat and provide it to you. Since that loop after switching from rovo's v84 to your 85.1 no further problems occured. It was a dirty flash from v84 directly to yours.
Gesendet von meinem Huawei Mate 8
wanam said:
I tried many themes with no issues, post your xposed logs to make sure it's not a theming engine issue.
A logcat should help in this case.
The Note4 issue was related to Knox/secure storage and i remember it was fixed by disabling secure storage.
Sent from my EVA-L09 using Tapatalk
Click to expand...
Click to collapse
Indeed it is a miui bug...if apply an original icon pack to another stock theme it doesn't work...
xposed is fine!
Thanks...
First mount System in TWRP before install Xposed on EVA-L09 ?
greetigs
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Unofficial Slim Bean 2.2
Compiled from Slim sources.
Android 4.3
For more detail/screenshots: http://slimroms.net/slim-bean-features
If you've flashed and found bugs please let me know and I'll try to fix them when I can.
INSTALLATION:
Backup your device
Wipe/Factory reset
Flash ROM
flash Gapps
reboot
Build2.2
... pulled due to reported problems.
Build 2
https://drive.google.com/file/d/0B4k5OpXTXcS9TmFVODkweGJON00/edit?usp=sharing
Build 1.7
https://docs.google.com/file/d/0B4k5OpXTXcS9RTRvWFBiLVBxc00/edit?usp=sharing
Build 1.6
https://docs.google.com/file/d/0B4k5OpXTXcS9Q3ljMHJ5UHRfZTg/edit?usp=sharing
Build 1.4
https://docs.google.com/file/d/0B4k5OpXTXcS9VHhNMWJvcldaZFk/edit?usp=sharing
Build 1.2
https://docs.google.com/file/d/0B4k5OpXTXcS9eXRGTUkxVEZiX0k/edit?usp=sharing
Build 1 latest version after beta 5
https://docs.google.com/file/d/0B4k5OpXTXcS9Y0MyZzcwREpxcVk/edit?usp=sharing
Beta5:
https://docs.google.com/file/d/0B4k5OpXTXcS9NU0tNTJteUR3TU0/edit?usp=sharing
Beta4:
http://www.4shared.com/get/746nfr-x/Slim-i9305-43beta4-UNOFFICIAL-.html
Beta 4 - new build with opensource camera built by paulk-collins? - (I've yet to test it so please post your experience should you test it)
http://www.4shared.com/zip/wp6ToBo6/Slim-i9305-43beta4-UNOFFICIAL-.html
Beta3:
http://www.4shared.com/zip/pdxlrtk7/Slim-i9305-43buildbeta3-UNOFFI.html?
For gapps: http://www.slimroms.net
If your keen to try a different kernel go to yank555 website, sign up and download and flash his kernel.
Nice! but download link doesn't work for me
Sent from my GT-I9305 using XDA Premium 4 mobile app
agelus69 said:
Nice! but download link doesn't work for me
Sent from my GT-I9305 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
i am sorry for what i said before.
来自 GT-I9300 上的 Tapatalk 4
I've uploaded it to a different mirror.. if you prefer a different one than the ones I've listed just ask and I'll upload it there (as long as its an easy upload site and doesnt cost money)
http://www.4shared.com/zip/seoyIX5F/Slim-i9305-43buildbeta12-UNOFF.html
Also building beta2 right now and should upload shortly.
infrag said:
Steady on... The download link works for some people.. I've just retested it and it does work. Your more than welcome to build your own version of the ROM and post it... However to say a link doesnt work and not ask or wait for it to be fixed before posting about your own ROM in this thread is a little rude... After all this was just posted...
I've uploaded it to a different mirror.. if you prefer a different one than the ones I've listed just ask and I'll upload it there (as long as its an easy upload site and doesnt cost money)
http://www.4shared.com/zip/seoyIX5F/Slim-i9305-43buildbeta12-UNOFF.html
Also building beta2 right now and should upload shortly.
Click to expand...
Click to collapse
i am sorry for what i said.
来自 GT-I9300 上的 Tapatalk 4
I'll wait for beta2. Thanks boss
Sent from my GT-I9305 using XDA Premium 4 mobile app
Sorry,
any screenshots about rom ?
Hi folks..any experts.. please need help here..
Accidentally, cuz my signal wasn't stable n low, i decided to change my baseband selection by dialing *#*#4636#*#* then tap 'phone info' > menu > 'select baseband'
at this point i was looking for 'automatic' as ussually i get better reception by done it, but accidentally my finger taps 'US baseband' & then my i9305 lost any signal & network connection. And it couldn't even manually or automatically selects mobile networks in the Settings.
I'm using Slimbean 4.2.2 & latest yank555 kernel, my baseband/modem is XXBLL5, operator : 3 (indonesia).
How can i reset my modem/baseband settings to make my connections/network work again..
I've tried to dial *#*#4636#*#* again then select 'celullar' since there's no 'automatic' mode, factory reset, full wipe, flash from beginning, even pull my simcard then reboot, power off then put again to reboot...but still no luck..
So please...Any help from any experts would be greatly appreciated...
Beta 3 compiled. Do people actually like Slim Android 4.3 or does nobody actually use it ?
infrag said:
Beta 3 compiled. Do people actually like Slim Android 4.3 or does nobody actually use it ?
Click to expand...
Click to collapse
i am thinking about buying the LTE S3. i heard that slim rom for the original S3 is the best fsking ROM ever and was super disappointed when i realised that it wasn't available for the i9305.
if you put more of a description, some screenshots and generally more info in the original post (how's the responsiveness? battery life? what kind of tweaks are you using? in what ways did you alter the original slim source? is this optimised to take advantage of the i9305's 2GB of ram?) then i'm sure you would have hundreds of eager and grateful users!
based on what i've read, i would definitely love this ROM to come to the LTE version of the phone. please keep up the good work and keep the updates and information coming!
oh wow this rom rocks!! No problems so far and I got 4g at home, no other rom has 4g at my home. thats strange :silly: :highfive:
darknagel said:
oh wow this rom rocks!! No problems so far and I got 4g at home, no other rom has 4g at my home. thats strange :silly: :highfive:
Click to expand...
Click to collapse
Any graphical glitches yet? Camera issues? I wouldn't mind trying this!
jrrevoltar said:
Any graphical glitches yet? Camera issues? I wouldn't mind trying this!
Click to expand...
Click to collapse
Yes... Graphical glitches.... but i dont have any camera issues.
Gesendet von meinem GT-I9305 mit Tapatalk 4
darknagel said:
Yes... Graphical glitches.... but i dont have any camera issues.
Gesendet von meinem GT-I9305 mit Tapatalk 4
Click to expand...
Click to collapse
Is the graphical glitches bad? From what apps? If it isn't much of an issue for a daily rom I would put this straight onto my device. Just need an opinion I guess from someone on xda using this rom.
The glitches are not so Bad. I had since 1 hour only one glitch
Gesendet von meinem GT-I9305 mit Tapatalk 4
darknagel said:
The glitches are not so Bad. I had since 1 hour only one glitch
Gesendet von meinem GT-I9305 mit Tapatalk 4
Click to expand...
Click to collapse
Awesome thanks!
---------- Post added at 10:16 AM ---------- Previous post was at 10:05 AM ----------
zmuda said:
Sorry,
any screenshots about rom ?
Click to expand...
Click to collapse
Yup! any screenshots
battery life/speed reports plz? if this ROM is solid i will buy an S3 instead of an LG optimus/nexus 4!
Its still in beta. Although it runs well Samsung havent released the updated Mali drivers so there will be some graphical glitches as far as I know. Until Samsung picks up their game we put up with these problems.
However this build works and function correctly for me and some others. If you want stable Android 4.3 right now though I'd get a Nexus...
Sorry,
about gapps, Which one should I install?
Slim_AIO_gapps
or
Slim_minimal_gapps
----------------------------------------
PS: about " Photosphere.4.3.build.beta.3 ",
What is it?
zmuda said:
Sorry,
about gapps, Which one should I install?
Slim_AIO_gapps
or
Slim_minimal_gapps
----------------------------------------
PS: about " Photosphere.4.3.build.beta.3 ",
What is it?
Click to expand...
Click to collapse
Have a look here for details
http://slimroms.net/index.php/new-addons-menu
Requires Xposed Framework!
Just got the Z1, pretty awesome device, it does have its minor quirks though.
This module allows you to disable the camera launch sound when using quick launch (hardware key and lockscreen widget).
It also allows you to do bursts without running into a bug I noticed.
When enabling bursts, using the hardware key to capture photos always results in two burst shots, no matter how short the press is (unless you don't use the two-step focusing). This rendered the button useless to me, as I use it for steadier shots, but being forced to do burst shots takes out the ability to use flash.
Ticking the option in the app allows you to use the hardware key for single shots, and the touch key for normal and burst shots.
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Compatibility:
Tested on the Xperia Z1. Will work on any device with the same camera app as the Z1.
Source:
The mod is open source: https://github.com/MohammadAG/Xposed-Z1-Camera-Tweaks
You may not publish it on the Play Store.
Download from Xposed Repository:
http://dl-count.xposed.info/modules/com.mohammadag.z1cameratweaks_v1_af72ec.apk
Support development:
If you found this mod useful, consider donating with PayPal.
Congrats for the new device and thank you for this wonderful mod
Just two questions for you:
Which firmware do you run and is it odexed or deodexed?
Did you get gravitybox to run without systemui fcs?
Gesendet von meinem C6903 mit Tapatalk
dtekkt said:
Congrats for the new device and thank you for this wonderful mod
Just two questions for you:
Which firmware do you run and is it odexed or deodexed?
Did you get gravitybox to run without systemui fcs?
Gesendet von meinem C6903 mit Tapatalk
Click to expand...
Click to collapse
Completely odexed stock (ota'd to 534), and rooted with vroot
It seems to work fine if you don't touch transparency settings. If you do you need to delete the keys added by it to the settings provider. I already forked it on Github and I'll push the fix I added to it.
Sent from my Samsung Galaxy S4 (GT-i9500) using Taptalk 4
MohammadAG said:
Completely odexed stock (ota'd to 534), and rooted with vroot
It seems to work fine if you don't touch transparency settings. If you do you need to delete the keys added by it to the settings provider. I already forked it on Github and I'll push the fix I added to it.
Sent from my Samsung Galaxy S4 (GT-i9500) using Taptalk 4
Click to expand...
Click to collapse
How do I do that? Tried to uninstall, so all settings should be reset but didn't work, still fcs when I try to check it again
Gesendet von meinem C6903 mit Tapatalk
Came across this while browsing modules in the Xposed app, absolutely perfect - fixes my 2 main gripes with the camera app. Thanks!
not working
not working in stock verdion. i have the latest version
Advance restore data via cwm to make gravity box work again. And don't touch transparency settings again! Bad!
dtekkt said:
How do I do that? Tried to uninstall, so all settings should be reset but didn't work, still fcs when I try to check it again
Gesendet von meinem C6903 mit Tapatalk
Click to expand...
Click to collapse
POWER1FM said:
Advance restore data via cwm to make gravity box work again. And don't touch transparency settings again! Bad!
Click to expand...
Click to collapse
Fixing the problem is better than clearing or restoring data from CWM
In adb shell or a terminal app:
Code:
settings put system status_bar_alpha_config_launcher null
settings put system status_bar_alpha_config_lockscreen null
settings put navigation_bar_alpha_config_launcher null
settings put navigation_bar_alpha_config_lockscreen null
You don't need all of them, you just need to clear the settings you set. Of course, running them all won't do any harm.
I'm not sure why @C3C076 opted to using system settings to store values, that makes it harder to clear settings if a user messes up.
karrouma said:
not working in stock verdion. i have the latest version
Click to expand...
Click to collapse
Install Xposed Framework and enable the module, then reboot.
MohammadAG said:
Fixing the problem is better than clearing or restoring data from CWM
In adb shell or a terminal app:
Code:
settings put system status_bar_alpha_config_launcher null
settings put system status_bar_alpha_config_lockscreen null
settings put navigation_bar_alpha_config_launcher null
settings put navigation_bar_alpha_config_lockscreen null
You don't need all of them, you just need to clear the settings you set. Of course, running them all won't do any harm.
I'm not sure why @C3C076 opted to using system settings to store values, that makes it harder to clear settings if a user messes up.
Install Xposed Framework and enable the module, then reboot.
Click to expand...
Click to collapse
That worked like a charm, now its back up and running again, thanks so much
Gesendet von meinem C6903 mit Tapatalk
xposed installer framwork
any help to work without rooting
karrouma said:
any help to work without rooting
Click to expand...
Click to collapse
Sorry, that's sort of impossible. You need a way to install Xposed.
Sent from my C6903 using xda app-developers app
Thanks for a great mod! would it be possible to make the camera open in manual mode when clicking on the button?
slonn said:
Thanks for a great mod! would it be possible to make the camera open in manual mode when clicking on the button?
Click to expand...
Click to collapse
You mean the hardware button?
Sent from my Samsung Galaxy S4 (GT-i9500) using Taptalk 4
MohammadAG said:
You mean the hardware button?
Sent from my Samsung Galaxy S4 (GT-i9500) using Taptalk 4
Click to expand...
Click to collapse
Yes, the hardware button.
slonn said:
Yes, the hardware button.
Click to expand...
Click to collapse
I'll look into it. I would've said yes but the camera app is two different activities (I'm not sure why Sony did this). There's the normal camera and a fastcapture one. The latter is only launched by the HW button and the lockscreen. That's why the icon didn't make the startup sound.
Anyway, when you switch to a differemt mode, or the front facing camera, it stops the fastcapture one and starts the normal one. So making it launch in manual mode may or may not cause some slowdown.
Sent from my Samsung Galaxy S4 (GT-i9500) using Taptalk 4
MohammadAG said:
I'll look into it. I would've said yes but the camera app is two different activities (I'm not sure why Sony did this). There's the normal camera and a fastcapture one. The latter is only launched by the HW button and the lockscreen. That's why the icon didn't make the startup sound.
Anyway, when you switch to a differemt mode, or the front facing camera, it stops the fastcapture one and starts the normal one. So making it launch in manual mode may or may not cause some slowdown.
Sent from my Samsung Galaxy S4 (GT-i9500) using Taptalk 4
Click to expand...
Click to collapse
Would be really good if you can get this to work. I hate having to set the mode to manual each time I use the shutter button to launch the camera...
sg1969 said:
Would be really good if you can get this to work. I hate having to set the mode to manual each time I use the shutter button to launch the camera...
Click to expand...
Click to collapse
+1
Sent from my C6902 using Tapatalk
slonn said:
Yes, the hardware button.
Click to expand...
Click to collapse
sg1969 said:
Would be really good if you can get this to work. I hate having to set the mode to manual each time I use the shutter button to launch the camera...
Click to expand...
Click to collapse
amey2606 said:
+1
Sent from my C6902 using Tapatalk
Click to expand...
Click to collapse
I've implemented this, and it works fine, but only when the kernel / camera HAL / Qualcomm overlay system (I'm not sure which is the problem) doesn't hit a bug.
If it does hit the bug (which has happened in 80% of my tests), the camera will be locked up till you reboot (you can use it and all, but the next startup of the camera will show you a "Camera not available" error).
I may push it in the next update as a feature for those willing to experiment, it's quite a shame it didn't work as intended :/
I'm guessing this explains why Sony decided to make two cameras, one was a workaround.
MohammadAG said:
I've implemented this, and it works fine, but only when the kernel / camera HAL / Qualcomm overlay system (I'm not sure which is the problem) doesn't hit a bug.
If it does hit the bug (which has happened in 80% of my tests), the camera will be locked up till you reboot (you can use it and all, but the next startup of the camera will show you a "Camera not available" error).
I may push it in the next update as a feature for those willing to experiment, it's quite a shame it didn't work as intended :/
I'm guessing this explains why Sony decided to make two cameras, one was a workaround.
Click to expand...
Click to collapse
That's a shame about the bug, but thank you very much for trying.
Work fine in my xperia Zl with 4.2.2
Just a suggestion :
Can you make it compatible with api level 16, android 4.1.2?
Enviado desde mi C6506 mediante Tapatalk
Before continuing reading the thread make sure you read install info and post 2 first
Make sure you're on m bootloader else it won't work!
You're free to use this firmware however you want. Share it on another forum or use the files for your own usage. I don't mind. U don't even have to give credit but it's always appreciated if you do!
About magic UI for honor 8
This rom is completely based on Honor Magic phone which runs Magic UI the system is completely stock with added needed files to get WiFi and nfc working.
ROM info:
Based on Honor Magic (Android 6.0) Chinese firmware B536.1
Rooted
Busyboxed
Viper4android added
Xposed
Magisked
Download
B536.1 evolution edition
https://mega.nz/#!fowTRJzJ!Gm0SE6qkHF78byC1-CoG_21fSKufu2DZP5Ta8C5V4u4
Fixed NFC now working thanks to huawei update me allowing 3rd party nfc
Fixed widgets permission
Fixed missing busybox
Permissive boot
Samsung browser
Gesture navigation
Viper4android
New control center features like screenshot eye mode hotspot and more.
Magic auto now works (now I can't tell if u need to agree the setup wizard to make it work
Older releases
B533
https://mega.nz/#!L1okBb6A!v9tpzuVtqn6VlyfkyBAfG69051QjnA-exo3Pxwsc3_s
Updated base firmware to 533
Pretty much it
B521 Deodex: https://mega.nz/#!mhpzlZ6Z!cqyCXjUq71e43iKtARySgdGPVpeOMvC8Wi7fK95Bi5U
Added Chrome browser
Boot is now running in permissive mode
Fixed message window issue
Fixed some graphic bug where toggle was out of screen so it was displaying half the switch
B521:
https://mega.nz/#!ehxxiTZQ!IMAuMv0kVMwMwwNQp85ERSp9IwWdO9LWEL0807DGhKQ
B516
https://mega.nz/#!TlxFUYjC!Dp7EqQF_99_UTVTyz3VNjtyLcWqdrz2r4msRk5b2wWI
Changelog:
B521
Pre rooted
Magiske'd
Xposed
Busyboxe'd
Bug fixes by Huawei
And more apps
B516 initial release
Installation instruction
Download the ZIP and put it on your SD.
Download and install Supersu by chainfire from http://download.chainfire.eu/1021/SuperSU/SR3-SuperSU-v2.79-SR3-20170114223742.zip
And you're Done.
For Freq asked Questions see post 2
screenies
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What works
Everything hardware wise
What doesn't
Audio for incoming calls
All fingerprint gestures
Control center doesn't work if you have navigation bar enabled
Probably something else I can't tell
This will probably be asked
Why I can't see NFC in settings?
Well because it's disabled in Chinese builds
fixed in latest update B536.1
WHY theres no nav keys???!!!
huawei Magic Fingerprint gestures to navigate. So far swipe from left and right on our sensor works as back button. Home and recents doesn't work for now.
Why doesn't control center being displayed if we have navigation keys? This is due to lower dpi from our side it works if u set androidsystem with 640 dpi but everything else will be a totall mess. So to activate navigation keys
open settings -> system settings -> accessibility and enable navigation bar
can i remove the control center up button in navigation bar?
yes. This wasn't working on first version but works on B521.
WGW isn't any new apps displaying any notifications?
they're disabled by default for some reason.?
open settings -> notification center select the app that doesn't display any issues.
battery time is terrible why?
it hasnt settled down you just move to a new apartment . . . It takes time to settle down
Why can't I install 3rd party launchers apps from playstore or anywhere else?:
You can but you must install it as system app huawei has added some sort of block method which prevents us from installing 3rd party launchers (no root)
This is also happening with dupe phone caller and contacts.
Info is invalid apk (which is strange)
Sent from my NATASHA using Tapatalk
Very good congratulations!!!! Does this rom works on all FRD variants?
Iaa85 from Brazil with Honor 8
Aside from the bugs you have mentioned is it stable or does it need some work to be done? Don't forget to mention Magic UI is based on marshmallow by the way! Another question that will be asked.
iaa85 said:
Very good congratulations!!!! Does this rom works on all FRD variants?
Iaa85 from Brazil with Honor 8
Click to expand...
Click to collapse
It should do yes since I included all files for wifi and camera for every honor 8 (since it's included in stock) so yes it should work.
XjokiX7 said:
Aside from the bugs you have mentioned is it stable or does it need some work to be done? Don't forget to mention Magic UI is based on marshmallow by the way! Another question that will be asked.
Click to expand...
Click to collapse
Oh yup I forgot about that [emoji14] well probably need some easier way to configure brightness etc and something is blocking launches from being installed (invalid package) this I don't know why only solution for now is to install it as a system app.
Well for daily usage it's stable but has its hard way of browsing trough lol since it seems to break some functions as we lower the density. such as notification center cannot be used if you enable navigation bar and the buttont to show it doesn't work. I haven't encountered any real issues nor haven't tried everything fully tbh but majority of features should be working
Sent from my NATASHA using Tapatalk
a new update will come hooefully today itll update system to 521
now i cant read chinese so cant tell what it fix
Sent from my NATASHA using Tapatalk
I'm trying to refrain my impulsive [email protected] instinct! But I can't.
Dominikrod said:
I'm trying to refrain my impulsive [email protected] instinct! But I can't.
Click to expand...
Click to collapse
Haha i had 521 version running
Sent from my FRD-L09 using Tapatalk
LastStandingDroid said:
Haha i had 521 version running
Sent from my FRD-L09 using Tapatalk
Click to expand...
Click to collapse
I was not able to make it boot. After flashing it doesn't want to boot on my L14 with B162.
Dominikrod said:
I was not able to make it boot. After flashing it doesn't want to boot on my L14 with B162.
Click to expand...
Click to collapse
Did u try patch it with su?
Sent from my FRD-L09 using Tapatalk
LastStandingDroid said:
Did u try patch it with su?
Sent from my FRD-L09 using Tapatalk
Click to expand...
Click to collapse
Yes I did. I used the one posted in the OP. I'm wondering if I got a bad download of the firmware though. I'm going to download the file once more and give it another run. :fingers-crossed:
Dominikrod said:
Yes I did. I used the one posted in the OP. I'm wondering if I got a bad download of the firmware though. I'm going to download the file once more and give it another run. :fingers-crossed:
Click to expand...
Click to collapse
did u wipe data
Sent from my FRD-L09 using Tapatalk
LastStandingDroid said:
did u wipe data
Sent from my FRD-L09 using Tapatalk
Click to expand...
Click to collapse
The first time I tried it I didn't. I just flashed it over B162, didn't work. Second time I did factory reset but when I was about to reboot got the message about "no OS installed".
Dominikrod said:
The first time I tried it I didn't. I just flashed it over B162, didn't work. Second time I did factory reset but when I was about to reboot got the message about "no OS installed".
Click to expand...
Click to collapse
Strange try install again
Sent from my FRD-L09 using Tapatalk
LastStandingDroid said:
Strange try install again
Sent from my FRD-L09 using Tapatalk
Click to expand...
Click to collapse
Finally got it to work. Had to reset phone and unlock it again, etc... Didn't wipe anything before flashing it nor after, but when it was booting up it started bootlooping and had to go to recovery and make a factory reset. Booting up went fine after that. Now I have to learn some mandarin!
Dominikrod said:
Finally got it to work. Had to reset phone and unlock it again, etc... Didn't wipe anything before flashing it nor after, but when it was booting up it started bootlooping and had to go to recovery and make a factory reset. Booting up went fine after that. Now I have to learn some mandarin!
Click to expand...
Click to collapse
There's still English lang
Sent from my FRD-L09 using Tapatalk
New update will come later today
It adds missing functionality and bug fixes
Such as recent now work if you disable control center key
Notifications are now working more properly.
Some other improvements I won't take up
Sent from my NATASHA using Tapatalk
Here's some screens oh and to get a even more magic feeling download fingerprint gestures
By superThomaslabs
Sent from my NATASHA using Tapatalk
Sorry for the delay I had some major issues with my phone yesterday so I was really to tired to fix the update but it'll come soon
Sent from my NATASHA using Tapatalk
Hi , what about the color accuracy on this ROM is it any better ? compared to stock i heard it had a bluish tint and color inaccuracy i'm really liking this phone and really wanna get it but i just discovered this color thing idk if i should worry about it or not ! , Thanks for you and everyone for your efforts developing to this device !!
DESCRIPTION:
Hey guyz..... Me Hassan Mirza from Pakistan
Today am here with a new thread and I Have a good news for you....
The new Elite Kernel is here,,, with these BENEFITS:
*PreRooted
*Based on Stock Kernel from Huawei
*You can write and flash anything in System Partition by any way,,,
*Titanium Backup works flawlessly with Phh Superuser or MagiskSU, you decide
*Only one Kernel for all variants of P9 ,,, just be sure that you have a valid build number and model number
DISCLAIMER:
I will Provide correct info and help......All This you are gonna do is At your Own Risk... Damage to your device of any type is at your Own Responsibility,,, Don't point finger at me or I will Just Laugh at you...
Install:
1.) Download this Elite Kernel for P9 v1.1
2.) Put in Root of SD Card.
3.) Turn off vendor mounted settings in OpenKirin settings within TWRP & Flash this in Latest TWRP (thanks to OldDroid)
4.) See if Superuser app installed, if not install Magisk Manager from XDA.
5.) And you are ROOTED.
The file it's boot.img modded and signed for boot.
Its Adviced to remove pattern Lock and Fingerprint Lock before installing.... just adviced,,,
If you like, donate
Hit Thanks and Support me if you Like and get help from this thread...Thank you...
Take Permission before sharing links or copying to other Forums....
If something is not working and you need support from me, then upload recovery.log of your problem,,, i wont considered your problem as a real problem without log,,, because others saying this as working!!
Changelog in 2nd post...
This is Based on Stock Huawei Kernel, Not compiled by Me...
Contributors:
@HassanMirza01 for doing all this
@OldDroid for giving us the latest TWRP
@phhusson for his wonderful work of making Phh superuser
@topjohnwu for Giving us the Magic #MagiskSU
@rafitcu for getting and requesting my attention here,,,
Status:
Status: Stable
Stable Release Date: 2017-06-23
Created on: 2017-06-23
Last Updated on: 2017-06-23
CHANGELOG:
2017-06-23 Elite Kernel for P9 v1.0: Initial release
reserved2
Thx, i try now, and coment
Thanks chief....is undervolting and underclocking possible with your kernel??????
Finally our very first custom kernel! Keep up with the great work mate!
Sent from my EVA-L09 using Tapatalk
furkey said:
Finally our very first custom kernel! Keep up with the great work mate!
Sent from my EVA-L09 using Tapatalk
Click to expand...
Click to collapse
Guyz.... I clearly wrote that this is based in Stock from Huawei... Its patched properly... And have some tweaks based on user demand....
How can I activate DT2W?
Gesendet von meinem EVA-L09 mit Tapatalk
@HassanMirza01 Just want to ask what you mean with "... for odd versions (phh).. and for versions from google play (Magisk Manager)?
For Magisk Manager I like to note, it is not anymore available from Playstore, at the moment just from official Magisk Thread v12
But @topjohnwu is working on new version v13, it has Magisk Manager included (dont know if it will be separate available in future)
Thanks for your great work, one kernel is amazing for all P9 devices
I am on v13 i think.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Gesendet von meinem EVA-L09 mit Tapatalk
Tecalote said:
@HassanMirza01 Just want to ask what you mean with "... for odd versions (phh).. and for versions from google play (Magisk Manager)?
For Magisk Manager I like to note, it is not anymore available from Playstore, at the moment just from official Magisk Thread v12
But @topjohnwu is working on new version v13, it has Magisk Manager included (dont know if it will be separate available in future)
Thanks for your great work, one kernel is amazing for all P9 devices
Click to expand...
Click to collapse
yeah you are right,,, i forgot that google play remove it,,, and more P9 variants support coming soon,,, as i dont know all about versions of P9,,, i asked the member but he only tells his own variant so for now, only L09 supported,, others can try and it will work too but if some issue came, that will only be fp not unlocking and dev options crashing,,, i will fixed that if someone tells me,,,
_HUGO_ said:
I am on v13 i think.
View attachment 4191770
Gesendet von meinem EVA-L09 mit Tapatalk
Click to expand...
Click to collapse
Did you flashed mine kernel ?? and yes, i have added magisk 13 modded one,,, and go to smart assistance and activate double tap to wake,,, if its not working, then also tells me,,, actually i port this from P9 Lite and i assumes same folders and settings for P9 too
Tecalote said:
@HassanMirza01 Just want to ask what you mean with "... for odd versions (phh).. and for versions from google play (Magisk Manager)?
Click to expand...
Click to collapse
actually i have already prepared to provide Phh superuser too,,, thats why it was written
Yes i have installed your Kernel on L09C432B383 DT2W don't work.
Gesendet von meinem EVA-L09 mit Tapatalk
please can you add possibility to modify frequency and voltage on your kernel...
thank's for your work
I installed on l19 b390, fingerprint scanner did not work, I could not enter a pin or password. Unfortunately there was no time to do logcat ...
rayman95 said:
please can you add possibility to modify frequency and voltage on your kernel...
thank's for your work
Click to expand...
Click to collapse
i guess you can use kernel audiotor or 3C toolbox with root to change both things,,,
kep2008 said:
I installed on l19 b390, fingerprint scanner did not work, I could not enter a pin or password. Unfortunately there was no time to do logcat ...
Click to expand...
Click to collapse
i got your issue,,, somehow send me your build.prop file,,, i will fix it,,,
_HUGO_ said:
Yes i have installed your Kernel on L09C432B383 DT2W don't work.
Gesendet von meinem EVA-L09 mit Tapatalk
Click to expand...
Click to collapse
can you send me some files,,,
/vendor/build.prop
/system/emui/base/prop/local.prop
/product/etc/prop/local.prop
/system/build.prop
/product/hw_oem/EVA-L09/prop/local.prop
if any one them missing then let me know....
HassanMirza01 said:
i guess you can use kernel audiotor or 3C toolbox with root to change both things,,,
Click to expand...
Click to collapse
I'll try as soon i save my stock kernel..
thank's
Pixel Launcher OMR1-4113793 Backport for Android 6.0.1+
Yeah, yeah, yeah, I know I'm boring and I keep posting the same thing over and over after each Developer Preview from Android O 8.0 releases... But I needed to do this backport for my SHIELD Tablet anyways, so I really don't mind sharing it here. Find this irrelevant and repetitive, feel free to close the thread.
So... Yet another time, the title says it all.
This is a quick (I spent 3 hours on it) backport of the Pixel Launcher OMR1-4113793, extracted from the Android O (8.0) Production release. I extracted the APK from the sailfish (Google Pixel) and tested it on my SHIELD Tablet, and as it wasn't working I modded it so that it'd work just fine on any Android 6.0.1+ devices.
I have implemented the Google's signature verification patch, as according to this thread so that the application doesn't Force Close on launch, as well as all the goodies from the Pixel Launcher ODR-4023749 v3 backport.
I've tested the application in my SHIELD Tablet running official LineageOS 13.0 nightlies, as well as in my Wileyfox Swift 2 with Android 7.1.1, and seems to be working like a charm with latest Google Play Services installed.
However, like last time I'd like to roll call all of you to please, test it and report back with any issue you find.
DOWNLOAD LINK
SMALI MODIFICATIONS
NOTE:
- DO NOT MIRROR MY FILES, please.
- The background color of the App Drawer won't look blue in Samsung devices, like last time, as I fixed it to look white.
- The apk, like last time, has been signed with my own key, so uninstall any previous versions before installing this one
- Bloggers! YouTubers! If you post links to this backport PLEASE, be sure NOT to make mirrors of it, and, it'd be awesome if you mentioned the original author in your blog posts.
- ¡Bloggeros! ¡YouTubers! Si posteais enlaces de éste backport, POR FAVOR, NO lo resubais, y, estaría genial si mencionárais quién es el autor del mismo.
- Do you want to get Android O emojis too? Check this out.
- No, still no reflection.engine crashes :laugh:
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Special thanks to P4Block for having to hear me screaming when the code doesn't work, and Jose (in case you read this), now you know why I was freaking out early today :silly:
Thanks! Magisk module please? :laugh:
thank you very much!
I'll try it later, your previous one was working just perfectly. Thanks
Lex_Corp said:
Thanks! Magisk module please? :laugh:
Click to expand...
Click to collapse
?
Magisk module for what? For an apk..?
robhug said:
?
Magisk module for what? For an apk..?
Click to expand...
Click to collapse
Makes it a system app. He had one for the last version
Lex_Corp said:
Makes it a system app. He had one for the last version
Click to expand...
Click to collapse
Just put it in the system with a file manager that support root directories like solid explorer with right permissions set (-rw-r--r-- ) and reboot
robhug said:
Just put it in the system with a file manager that support root directories like solid explorer with right permissions set (-rw-r--r-- ) and reboot
Click to expand...
Click to collapse
I ended up using a different magisk module called app systemizer. I only asked because he had made one previously. Thanks though
By the way you can use Lucky Patcher or many other apps to make Launcher as system-app
Does anyone know how to get Google Now page
river.eliason said:
Does anyone know how to get Google Now page
Click to expand...
Click to collapse
Make it a system app
Thanks guy, but don't show apps on app drawer. Redmi note 4, miui 8.2.
TatataUlloa said:
Thanks guy, but don't show apps on app drawer. Redmi note 4, miui 8.2.
Click to expand...
Click to collapse
Yeah, the pixel launcher doesn't show up in your app drawer.
If you want to select it as your default launcher you'll have to do that from settings. Look for a setting called home. It should be under the default apps category
nice work bro
is hide app from drawer available o this mod?
flashable pls
Where dots ;;;????
Στάλθηκε από το Nexus 6P μου χρησιμοποιώντας Tapatalk
matrixios01 said:
Where dots ;;;????
Στάλθηκε από το Nexus 6P μου χρησιμοποιώντας Tapatalk
Click to expand...
Click to collapse
Compatibile only with Android 8
Inviato dal mio Moto G (2014) utilizzando Tapatalk
Crix.Ful92 said:
Compatibile only with Android 8
Inviato dal mio Moto G (2014) utilizzando Tapatalk
Click to expand...
Click to collapse
I have installed it Dp4
Στάλθηκε από το Nexus 6P μου χρησιμοποιώντας Tapatalk
Woow, this is amazing! Very nice work, the thanks button was smashed instantly! I will still use Nova due the icon pack support, but anyway this is great port. :good:
Crackeeer said:
By the way you can use Lucky Patcher or many other apps to make Launcher as system-app
Click to expand...
Click to collapse
Lucky Patcher did not give me the option to move to system. Do you need to have a rooted device?
---------- Post added at 01:33 PM ---------- Previous post was at 01:30 PM ----------
robhug said:
Just put it in the system with a file manager that support root directories like solid explorer with right permissions set (-rw-r--r-- ) and reboot
Click to expand...
Click to collapse
I downloaded solid explorer and enabled it to show the root folder.
What exactly do I need to do?
Put what to where?
---------- Post added at 01:50 PM ---------- Previous post was at 01:33 PM ----------
robhug said:
Just put it in the system with a file manager that support root directories like solid explorer with right permissions set (-rw-r--r-- ) and reboot
Click to expand...
Click to collapse
I tried this, but without rooted device it won't let me