[Completed] Bootloop N910C - XDA Assist

I soft bricked my note 4 (n910C exynos), I had the unofficial cyanogenmod 13 ROM from RaymanFX for some times and wanted to get back to a stock rom.
I got an android M rom from sammobile and flashed it with Odin like I already did quite some times before. Since then I got a bootloop, I tried flashing other roms from sammobile, or xda but always the same result. I have access to the download mode but can't boot. I think there might be a problem with the fact that I flashed an android 6 rom when I had an android 5 version (what I got from my research).
There must be a way to completly flash the phone from odin no? Just reset everything? I'm kinda lost, I tried all I found in the last 5 hours and I always have that bootloop, any help would be greatly appreciated!
Will post updates if I have any more info or progress.
PS: Last rom currently flashed was the 6.0.1 one from this post: http://forum.xda-developers.com/note-4/general/note-4-n910c-lollipop-5-0-1-multiple-t3028939 flashed using AP on Odin, couldn't flash the 5.1.1 (got a NAND write fail).

Hi,
Thanks for using XDA assist.
Please create a XDA account and post here:
[NOOB FRIENDLY] Ask the question!
Good Luck! - gsstudios

Related

[Completed] [Q] Help me pls with my Samsung SIIX SGH-T989D koodo..

pls help me with my Samsung SIIX sgh t989d koodo.. ICS 4.0.4 its an old phone but this phone is my best one..
i rooted my phone using this.
galaxys2root.com/t-mobile-galaxy-s2/how-to-root-icsgb-on-t-mobile-galaxy-s2-sgh-t989/
it went well..
then i backed up my rom first when i rooted it. i followed these steps..
galaxys2root.com/galaxy-s2-backup/how-to-backup-rom-on-rooted-t-mobile-galaxy-s2-sgh-t989/
then i decided to install new rom.. i followed this.
galaxys2root.com/t-mobile-galaxy-s2/how-to-install-rom-on-rooted-t-mobile-galaxy-s2-sgh-t989/
i install the darkside evolution
galaxys2root.com/t-mobile-galaxy-s2/darkside-evolution-ics-rom-v7-for-t-mobile-galaxy-s2-sgh-t989-best-rom/
i thought everything went fine but when i rebooted my phone, it is just stucked in bootload image of darkside evolution.. i waited about hrs but its still stucked.. i restarted my phone but no luck... then i just decided to restore my backup using CWM but its getting error. when it about to restore the system files, it keeps getting error...
then i search for the stock rom of koodo sgh-t989d.. i end up here.. forum.xda-developers.com/showthread.php?t=1844657
""""Quote:
Originally Posted by lypang
Haven't seen anyone shared this yet.
Here's the KOODO ICS 4.0.4 stock ROM I used CWM to flash to stock after I tried the custom ROM.
dl.dropbox.com/u/83026541/KO...ock_Signed.zip
I also flashed DARKSIDE.SUPER.WIDE before I flashed this or you can used CWM Recovery 6.0.1.2 to wipe system and cache.""""
i followed that but end up stucking in KOODO bootload image.. im stuck i dont know what to do anymore. pls help me.. im gonna die.. :crying:
i tried to search for stock rom and install using odin but it ends up in hotfile and that page is not working anymore. so i cant try to install stock rom using odin since i cant find the file i need..
ANYONE PLS HELP.. :crying::crying::crying::crying:
I BEG YOU.
Hi there,
You have a dedicated forum for this device and for more relevant you must start asking there:
XDA Developers> T-Mobile Samsung Galaxy S II SGH-T989 > T-Mobile Samsung Galaxy S II Q&A, Help & Troubleshooting
Have a nice day

[Completed] [Q] T-Mobile S3 sgh-t999 Bricked

So I have an old t-mobile s3 and it was in great condition. Few days ago I decided to root it (I've never rooted or done things like that before) and I used something called king root app and it rooted my phone. I was able to flash cm 11 to update my phone to 4.4.4 on it and the phone was working smoothly. Then a few minutes later I felt like I got the hang of customizing my phone and tried to flash a rom called glamour s5 costum rom (it's designed for the s3). I went to cwm recovery mode and flashed the rom. Then when I tried to reboot it, it completely went black and wouldn't turn on again.
I tried to get it to download mode and recovery mode but it still won't work. I also tried using a debrick image. I not sure if I used the right one though because I used a 4.3 debrick image and my s3 is 4.4.4. after I updated it with the cm 11 rom.
Can someone please give me some advice on how to fix this, I'm freaked out that I might have totally ruined my phone! I ordered a usb jig because I saw on YouTube that a guy fixed his hard bricked s3 with the jig. I hope it works. But does anyone know any other way I can fix my phone and can someone tell me what I might have done wrong and if the usb jig might work in my situation.
Thanks
Hi there,
Please see this thread where is discussed about your problem: Hard? Soft? brick galaxy s3 t999
And this one: [GUIDE] Restore Bootloader Bricked S3 to Stock Firmware AFTER 4.3 update. No Jtag
You can ask there if you have other questions related or directly in this forum for other: T-Mobile Galaxy S III Q&A, Help & Troubleshooting
Good luck
Wait, I have a question about the link. For the second link, does bootloader brick mean soft brick. Because I think mine is a hard brick, so will the method the first guy said possibly work.
BTW thanks for helping me out. It been like a week and no one replied.
Sent from my SM-G900T using XDA Free mobile app
lakeo said:
Wait, I have a question about the link.
Click to expand...
Click to collapse
R_a_z_v_a_n said:
You can ask there if you have other questions related or directly in this forum for other: T-Mobile Galaxy S III Q&A, Help & Troubleshooting
Click to expand...
Click to collapse
Please see my last link for more questions.
Thanks

[Completed] galaxy s3 sgh-i747 wont boot without sd

ok well a couple of days ago i hard bricked my phone trying to unlock my bootloader using ezunlock app. i was running cyanogenmod 11 android version 4.4.4 i was able to find an debrick image and put it on a usb and boot from the usb. but now in an attempt to get the phone to boot from the emmc i tried upgrading to cyanogenmod 12 android version 5.1.1. sadly this didnt work. im out of ideas and i did find a post about being able to flash the rom with odin and that my restore the bootloaders in my galaxy s3 sgh-i747 but im at a loss. any help i could get in solving this and hopefully getting my phone to boot on its own.
hfiatoa53 said:
ok well a couple of days ago i hard bricked my phone trying to unlock my bootloader using ezunlock app. i was running cyanogenmod 11 android version 4.4.4 i was able to find an debrick image and put it on a usb and boot from the usb. but now in an attempt to get the phone to boot from the emmc i tried upgrading to cyanogenmod 12 android version 5.1.1. sadly this didnt work. im out of ideas and i did find a post about being able to flash the rom with odin and that my restore the bootloaders in my galaxy s3 sgh-i747 but im at a loss. any help i could get in solving this and hopefully getting my phone to boot on its own.
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
We cannot provide technical support nor can other members reply to your posts here on XDA Assist Sorry to hear about your trouble but as you know there is an XDA area dedicated to the AT&T Samsung Galaxy S3 at http://forum.xda-developers.com/galaxy-s3-att where you have posted before. I suggest you post your question with all relevant details there where the experts familiar with your device will be best able to guide you.
Good luck!
This thread is closed.

[Completed] How to flash CWM or TWRP to an unknown device manually

I live here on Dubai. I bought my Tab named "Q-wave781M"(Which is not known) with 4.2.2 firmware cost 600+ AED. I want to update it atleast 4.3 or 4.4. Checked the About Tablet then update but nothing pop out. I dl'ed an app that check what firmware i can upgrade to and it possible for 4.4. 2 weeks ago i learned about custom roms. But there is a possibility to brick if it's not properly installed. I dl'ed Rom Manager but cwm/twrp doesn't support the device(Can't install/flash). A msg said it's installed but after booting to recovery still the stock recovery. I'm newbie here and modding android. Please help. Ty
XDA Visitor said:
I live here on Dubai. I bought my Tab named "Q-wave781M"(Which is not known) with 4.2.2 firmware cost 600+ AED. I want to update it atleast 4.3 or 4.4. Checked the About Tablet then update but nothing pop out. I dl'ed an app that check what firmware i can upgrade to and it possible for 4.4. 2 weeks ago i learned about custom roms. But there is a possibility to brick if it's not properly installed. I dl'ed Rom Manager but cwm/twrp doesn't support the device(Can't install/flash). A msg said it's installed but after booting to recovery still the stock recovery. I'm newbie here and modding android. Please help. Ty
Click to expand...
Click to collapse
Hello there! Welcome to XDA!
Since there is no Forum for your device on XDA...
First register an XDA account, then try asking here:
Android Q&A, Help & Troubleshooting
or here:
General Q&A
Good Luck!
XDA Visitor said:
I live here on Dubai. I bought my Tab named "Q-wave781M"(Which is not known) with 4.2.2 firmware cost 600+ AED. I want to update it atleast 4.3 or 4.4. Checked the About Tablet then update but nothing pop out. I dl'ed an app that check what firmware i can upgrade to and it possible for 4.4. 2 weeks ago i learned about custom roms. But there is a possibility to brick if it's not properly installed. I dl'ed Rom Manager but cwm/twrp doesn't support the device(Can't install/flash). A msg said it's installed but after booting to recovery still the stock recovery. I'm newbie here and modding android. Please help. Ty
Click to expand...
Click to collapse
I am trying to figure this out too pls

[Completed] marshmallow for my moto nexus6 running 5.1.1 buildLZT28N

I have a stock unrooted Motorola nexus6 that is currently running lollipop 5.1.1 build LZY28N. I am using the AT&T straight talk sim card. I cannot get it to update to marshmallow. ive been considering unlocking the bootloader and flashing it myself, but I don't know wich build to download. from what ive gathered the LZY28N build is tmobile build. I also seen somewhere that I need to download build MRA58K. I have downloaded this build but have not proceeded because I'm not sure if it is the correct build. I want to get an official build as to not screw up my new device. I recently had a one plus one running cyanogen 12.1 and it was crashing a lot and I'm trying to prevent this from happening to this phone. anyone out there have any info for me? I know how to unlock bootloader, root,install twrp, and flash. I just need some direction as to what build to flash and have everything go as smooth as possible
Hi,
Thanks for writing to us at XDA Assist.
You can post your question in your device forum help section to get further help:
Noob Friendly Q and A Help Thread
Good luck!

Categories

Resources