hello
i have got stucked in fastboot mode while installing custom rom.
please help me how to install os in my phone ( either cyanogen or miui).
Thanks in advance.
Regards,
jeevan.
Fastboot flash stock.
boyapatijeevan said:
hello
i have got stucked in fastboot mode while installing custom rom.
please help me how to install os in my phone ( either cyanogen or miui).
Thanks in advance.
Regards,
jeevan.
Click to expand...
Click to collapse
Hope this helps. Go to their website and download the fastboot ROM of your desired phone and desired locale. There you can also find the MiPhone Flasher exe file. Run that file on your PC, connect the device with a USB cable when in Fastboot Mode, the application will detect the device, then provide the Downloaded ROM path and hit Flash. within 2-3 mins you're good to go
I have same problem with my mi 4i
Falshing via miflash tool , adb and qfil still got stucked on fastboot mode
When i wipe using mirecovery got notice
Wipe data failed
Any more solution to solve this suck problem?
Related
Hi guys,
I have a very bad problem with my HTC Desire 816G, it bricked and i can't now flash the stock or custom rom!
When i turn on my device it going to the stock recovery!
bootloader is unlock, i want to install the TWRP but i can't because i can't access the fastboot!
I don't know what i must do! I'm so worry and uneasy! plz help me...
alirezarz62 said:
Hi guys,
I have a very bad problem with my HTC Desire 816G, it bricked and i can't now flash the stock or custom rom!
When i turn on my device it going to the stock recovery!
bootloader is unlock, i want to install the TWRP but i can't because i can't access the fastboot!
I don't know what i must do! I'm so worry and uneasy! plz help me...
Click to expand...
Click to collapse
In stock recovery, if there's an option like 'Reboot into bootloader', that's the fastboot mode, enter it and flash TWRP..
If there's no other way, flash the original firmware from here: http://androidtechnics.blogspot.in/2015/06/htc-desire-816g-htc-d816h-dual-sim.html using SP Flash Tool..
How did you soft-brick your device first of all?
GokulNC said:
In stock recovery, if there's an option like 'Reboot into bootloader', that's the fastboot mode, enter it and flash TWRP..
If there's no other way, flash the original firmware from here: using SP Flash Tool..
How did you soft-brick your device first of all?
Click to expand...
Click to collapse
there is no option like that in the stock recovery!
i just downloaded the stock rom and tried to flash with SP Flash Tool but device is not detected by pc!
i unlocked the bootloader and then i reset the phone, device began updating with the stock update center for the stock rom! and...
alirezarz62 said:
there is no option like that in the stock recovery!
i just downloaded the stock rom and tried to flash with SP Flash Tool but device is not detected by pc!
i unlocked the bootloader and then i reset the phone, device began updating with the stock update center for the stock rom! and...
Click to expand...
Click to collapse
Install VCOM drivers and Android CDC Gadget drivers in computer and connect phone in switch off mode..
GokulNC said:
Install VCOM drivers and Android CDC Gadget drivers in computer and connect phone in switch off mode..
Click to expand...
Click to collapse
still doesn't detect! sorry, what do you mean of switch off mode?:crying:
alirezarz62 said:
still doesn't detect! sorry, what do you mean of switch off mode?:crying:
Click to expand...
Click to collapse
Remove battery for 5 secs, then put it inside and connect to computer
GokulNC said:
Remove battery for 5 secs, then put it inside and connect to computer
Click to expand...
Click to collapse
Unfortunately this device has no removable battery!
is there any other way?
I was trying to flash cm 12 thats how i bricked and sp flash tool is not working in my case. my boot loader is unlocked . when i reboot system from cwm recovery it restarts to cwm recover itself help fix plz.
hi guys
my urbane 2 stuck in fastboot mode without any option to go to recovery .
when i try to choose recovery it just restart it in same fastboot menu.
i cant install the OS since i have to it in ADB or via recovery and i cant do both of them
any idea?
anyone ): ?
sagiag said:
hi guys
my urbane 2 stuck in fastboot mode without any option to go to recovery .
when i try to choose recovery it just restart it in same fastboot menu.
i cant install the OS since i have to it in ADB or via recovery and i cant do both of them
any idea?
Click to expand...
Click to collapse
The only way I can say is to re-flash everything it will take you back to factory. Just download what I uploaded to AFH FACTORY IMAGE. As long as you are in fastboot run the file that has .bat as the extension. It will flash everything including bootloader so soon after you setup your watch again it will update everything back to 2.0+. I don't recall whether you need platform tools or not, because I think it is self-contained, but if it doesn't work just search for platform tools extract everything into the platform tools folder and start the .bat file.
| SOLVED | The solution to the exact same problem I described here:
http://4pda.ru/forum/index.php?showtopic=703245&view=findpost&p=84936903
Sorry, I don't know English well.
Hey bro i have the same problem , everytime i try to update the watch OTA to 2.0 it ends me up at bootloader!! So i reflashed the stock image once again and it starts stuck at bootloader again even if i try to flash the 2.0 by TWRP!! So any solution please
Did you solve it bro?
Code:
[CENTER]If You Have Hard Bricked Your Device Then Only Use This Guide[/CENTER]
CPH1861EX_11.A.29
Files You Need To Download:
1:Miracle Box Tool-https://mega.nz/#!lVsQGSaC!6TTJopMyntMQA0IKYdC_5BlsxIjV_Ibhx2qWL_ZqDyI
2:Stock Rom- https://mega.nz/#F!ncMFUaaa!0fVNwJ_Io0EMFv8YLjBZlQ [Select Download As Zip]
3:https://androidmtk.com/install-android-cdc-driver-manually [Install Drivers Using This Guide]
Click to expand...
Click to collapse
Steps To Flash Stock Rom:
1:Install Miracle Box And Drivers
2:Launch Miracle Box
3: Open Mtk Tab
4:Click on Services
5:Select Write From The Available Options
6:Select 8th Boot From Boot Options
7:In Second Options,Select Oppo Realme 1
8:Check Skip Preloader File
9:Hit Start
10:Now connect your phone and hold volume and power buttons... It will flash and turn off your phone
11:Remove Cable And Press Power+VOLUME Up For 15 Seconds
You Have Unbricked Your Device
Click to expand...
Click to collapse
Credits:
Hamza(From Telegram Group For Writing The Tutorial0
Shobith(For Stock Rom Dump)
AnuragRai(For Simplifying The Guide)
1st link miracle box is not working plz correct it bro
can you share download links from other providers? mega asks for premium account.
thank you.
Didn't work for me
anurag rai said:
Code:
[CENTER]If You Have Hard Bricked Your Device Then Only Use This Guide[/CENTER]
CPH1861EX_11.A.29
Credits:
Hamza(From Telegram Group For Writing The Tutorial0
Shobith(For Stock Rom Dump)
AnuragRai(For Simplifying The Guide)
Click to expand...
Click to collapse
After flashing twrp recovery when I booted my device, a software update popped up and it automatically updated over night and my device hard bricked. I tried everything but couldn't fix it. My pc is not even recognising my phone so can't follow your steps. Any suggestion or help to fix my device will be appreciated.
same mine bro,
rom version was a31 and after installed twrp, my device hard bricked. i couldnt solve yet, waiting a newer version of miracle box or etc.
anurag rai said:
Code:
[CENTER]If You Have Hard Bricked Your Device Then Only Use This Guide[/CENTER]
CPH1861EX_11.A.29
Credits:
Hamza(From Telegram Group For Writing The Tutorial0
Shobith(For Stock Rom Dump)
AnuragRai(For Simplifying The Guide)
Click to expand...
Click to collapse
i dumped the stock rom bro @besttipsYT Not Shobith
this method is not working at this time...when i trying to flash by this method only show.......phone connected......downloding boot8....then disconnect my phone ..&reboot
Please don't flash custom recovery (here twrp) without proper knowledge or just sake of modding device. The builds and methods are not always working and may end up bricking your device.
Hi There, Can someone PLZ help me setting up OPPO PRELOADER Drivers correctly. Everytime i try to use miracle thunder i get the following log:
Waiting for USB Port...
Set USB Serial Device (COM9)
Connecting to Phone,Wait..
Connected to Phone.
CPU: MT6771 SW:0000 Ver: CA00
>>Downloading Boot8 ...
and it remains on here forever.
Actually oppo preloader shows for some time in pc and after that it goes away and hence it is not letting the miracle thunder work properly (i guess)
when my phone was working (booting in coloros 6, then also oppo preloader was doing the same thing and after a few seconds my battery would start charging), now i can't see anything on screen as it's bricked now.
Preloader doesn't even work with SP Flash Tools also.
EDIT : I have tried almost everything i knew, drivers manager add legacy option etc.
If someone could help me get out of this problem, i would really be grateful.
Brick Reason : Flashed TWRP but used fastboot command to boot into that : (
PLEASE HELP SOMEONE
Alen012 said:
Hi There, Can someone PLZ help me setting up OPPO PRELOADER Drivers correctly. Everytime i try to use miracle thunder i get the following log:
Waiting for USB Port...
Set USB Serial Device (COM9)
Connecting to Phone,Wait..
Connected to Phone.
CPU: MT6771 SW:0000 Ver: CA00
>>Downloading Boot8 ...
and it remains on here forever.
Actually oppo preloader shows for some time in pc and after that it goes away and hence it is not letting the miracle thunder work properly (i guess)
when my phone was working (booting in coloros 6, then also oppo preloader was doing the same thing and after a few seconds my battery would start charging), now i can't see anything on screen as it's bricked now.
Preloader doesn't even work with SP Flash Tools also.
EDIT : I have tried almost everything i knew, drivers manager add legacy option etc.
If someone could help me get out of this problem, i would really be grateful.
Brick Reason : Flashed TWRP but used fastboot command to boot into that : (
PLEASE HELP SOMEONE
Click to expand...
Click to collapse
Miracle box, SP Flash Tool and MTK Droid Tools no longer work with Realme. If you can access Fastboot then flash stock recovery and proceed further.
Bootloop if i try t access fastboot mode. Can go to recovery but its not allowing me to flash amything saying its an older version. Any work around yet?
Naveen56 said:
Miracle box, SP Flash Tool and MTK Droid Tools no longer work with Realme. If you can access Fastboot then flash stock recovery and proceed further.
Click to expand...
Click to collapse
StripsOfTatti said:
Bootloop if i try t access fastboot mode. Can go to recovery but its not allowing me to flash amything saying its an older version. Any work around yet?
Click to expand...
Click to collapse
Which recovery are you in? Is it Stock or Custom?
If u have stock first wipe data and then flash boot.img or ozip file (stock ROM).
If u have custom recovery then you need to flash stock recovery + stock ROM.
plz help me ihave realme 1 and it stuck in logo and orange state and restart over and over and icannot boot into recovery or fastboot plz help me
Simba Gaara said:
plz help me ihave realme 1 and it stuck in logo and orange state and restart over and over and icannot boot into recovery or fastboot plz help me
Click to expand...
Click to collapse
If recovery and fastboot are inaccessible means you need to visit service center.
When trying to connect realme 1 to miracle it showing usb device not connected, how to solve this? Drivers are installed
Naveen56 said:
Miracle box, SP Flash Tool and MTK Droid Tools no longer work with Realme. If you can access Fastboot then flash stock recovery and proceed further.
Click to expand...
Click to collapse
So bro in case if I brick my phone then I can flash stock rom using stock recovery.......??
Do I get those Rom files from official realme website?
AwesomeVk47 said:
So bro in case if I brick my phone then I can flash stock rom using stock recovery.......??
Do I get those Rom files from official realme website?
Click to expand...
Click to collapse
Yes. Do remember you need both fastboot and recovery to be working, so you can flash Stock Recovery (only if you have TWRP installed).
If you have stock recovery installed then download stock rom from official Realme site and place it in the Sdcard (otg wont help). Enter into recovery and update/install the ozip.
If your phone is completely dead then above method wont help and you have to follow another one.
Note: If your device is rooted then installing (from stock recovery) stock rom fails. At this time flash TWRP from fastboot then flash zip file (convert stock rom from ozip to zip).
Naveen56 said:
Yes. Do remember you need both fastboot and recovery to be working, so you can flash Stock Recovery (only if you have TWRP installed).
If you have stock recovery installed then download stock rom from official Realme site and place it in the Sdcard (otg wont help). Enter into recovery and update/install the ozip.
If your phone is completely dead then above method wont help and you have to follow another one.
Note: If your device is rooted then installing (from stock recovery) stock rom fails. At this time flash TWRP from fastboot then flash zip file (convert stock rom from ozip to zip).
Click to expand...
Click to collapse
Sorry to bother you bro but let's say I bricked my phone and have twrp installed......where will I get the stock recovery from and how to enter the fastboot mode of realme phone if it's bricked
AwesomeVk47 said:
Sorry to bother you bro but let's say I bricked my phone and have twrp installed......where will I get the stock recovery from and how to enter the fastboot mode of realme phone if it's bricked
Click to expand...
Click to collapse
Download stock recovery.
Enter fastboot mode using Power + Volume Down. If that does not work use other combinations.
Now flash stock recovery.
Enter recovery using
Code:
fastboot oem reboot-recovery
Install ozip.
Naveen56 said:
Download stock recovery.
Enter fastboot mode using Power + Volume Down. If that does not work use other combinations.
Now flash stock recovery.
Enter recovery using
Install ozip.
Click to expand...
Click to collapse
Is that link for realme 1 stock recovery?.......it would be great help if you could tell me how to obtain it....just for future use
---------- Post added at 03:18 PM ---------- Previous post was at 03:07 PM ----------
Naveen56 said:
Download stock recovery.
Enter fastboot mode using Power + Volume Down. If that does not work use other combinations.
Now flash stock recovery.
Enter recovery using
Install ozip.
Click to expand...
Click to collapse
Will this link work for stock rom file?
Link1
https://www.realme.com/in/support/software-update
Link2
https://www.getdroidtips.com/oppo-realme-1-stock-firmware-collections/
Which one of these should I use?
I have a violet device.
That device bootloader is unlocked. Then I have try to flash custom recovery, but device can't boot into recovery, not custom & mi recovery.
Now device only showing redmi by xiaomi logo.
Then I have try to flash a latest fastboot rom, but its cannot done showing antirbpass error.
Also I trying to format user data by adb command it's showing my device is f2fs pertition format,it's cannot be done.
Now device only boot into fastboot mode, but not take a fastboot flash, show antirbpass error
How can I solve this issue.
Sorry for my bad English.
Download minimal adb & extract it in c drive & then extract fastboot into same folder then connect your phone to pc in fastboot mode & go to that folder & double click clean all.bat & wait for it to finish & you will boot to rom & unbrick your phone 100% tested by me
M.A. Kaium said:
I have a violet device.
That device bootloader is unlocked. Then I have try to flash custom recovery, but device can't boot into recovery, not custom & mi recovery.
Now device only showing redmi by xiaomi logo.
Then I have try to flash a latest fastboot rom, but its cannot done showing antirbpass error.
Also I trying to format user data by adb command it's showing my device is f2fs pertition format,it's cannot be done.
Now device only boot into fastboot mode, but not take a fastboot flash, show antirbpass error
How can I solve this issue.
Sorry for my bad English.
Click to expand...
Click to collapse
Please post this in the questions sub forum...this is not the place..
navi_58861170 said:
Download minimal adb & extract it in c drive & then extract fastboot into same folder then connect your phone to pc in fastboot mode & go to that folder & double click clean all.bat & wait for it to finish & you will boot to rom & unbrick your phone 100% tested by me
Click to expand...
Click to collapse
I have platform tools from.which i used to flash recovery etc. Should i copy the fastboot rom files in platform tools and click on flash all.bat because there is no .bat file of clean all.
Sent from my Redmi Note 7 Pro using XDA Labs
navi_58861170 said:
Download minimal adb & extract it in c drive & then extract fastboot into same folder then connect your phone to pc in fastboot mode & go to that folder & double click clean all.bat & wait for it to finish & you will boot to rom & unbrick your phone 100% tested by me
Click to expand...
Click to collapse
where i can download minimal adb ? I have the same problem.... thank.
https://forum.xda-developers.com/showthread.php?t=2588979
antibrpass error
joke19 said:
https://forum.xda-developers.com/showthread.php?t=2588979
Click to expand...
Click to collapse
good morning, my xiaomi redmi note 7 lew I did bootloader unlock and install the recovery "twrp", install a custom rom viperos, after it restarted it stayed in the redmi logo, I tried to install other rom via recovey and it doesn't recognize me zip, I managed install the crDroid but it stays in the startup logo, I tried to flash with xiaomi miflash tool and I get the error of flash anti-pass error and I can't get my RN7 back to life, who can help me thank you from now on.
Thank you
Which twrp? I hope orange fox
---------- Post added at 12:28 PM ---------- Previous post was at 12:24 PM ----------
Wipe system, data and cache.
Then flash the last firmware. Is ur choice Chinese beta or global.
After it ur rom, maybe a customer kernel, gapps and maybe magisk.
She first start need time and by havoc by me my phone reboot short by the first loading.
And every time u play with ur software, u must look for ur battery.
Hope it helps
Miui is not my.
thank
thanks, I managed to roll a custom rom, but I wanted to use another rom and in the recovery it gives invalid zip file format and it doesn't let me install, but at least I recovered the phone. now see how I do to install my rom viperos :good:
bro ur a ****ing genuis i spent like 6 hours trying various custom roms and trying all stock roms to fix this issue . love u finally my phone is working bro .
Hello Guys
My device is Gm1910 variant
I flashed 9.5.11 Gm21AA via fastboot normally with flash.bat command
No errors occured , everything is ok
Then i got stuck at boot
After 20 minutes i reset the phone via stock recovery to ensure a clean startup , still same result
I flashed 9.5.3 Gm21AA via fastboot
Still same result
Bootloader is unlocked
What should i do ?
How can i boot it up
Please help me , i feel helpless !
extract images.zip and Othersflashall.zip to the directory. Then run Flash-all-partitions-fastboot
PerthBoi92 said:
extract images.zip and Othersflashall.zip to the directory. Then run Flash-all-partitions-fastboot
Click to expand...
Click to collapse
Am i picking the right rom for this !
Which rom is the safest to flash for my model ?
Yes I have the Chinese model aswell. Its the correct one
I have another problem , my windows fall apart so i installed it again
And now i dont have drivers
Since I cant boot to enable usb debugging
Which drivers should i install to recognize a fastboot device ?
You don't need to boot the phone.. Hold VOL UP and DOWN and POWER at the same time. It will boot into Fastboot. Windows should automatically detect the phone.
PerthBoi92 said:
You don't need to boot the phone.. Hold VOL UP and DOWN and POWER at the same time. It will boot into Fastboot. Windows should automatically detect the phone.
Click to expand...
Click to collapse
True , but after i installed one plus drivers and open adb\fastboot cmd ,
entering fastboot devices shows blank
how can i get it to recognize the device on fastboot ?
i got it recognized in fastboot mode , now i will commence your solution with 9.5.11
Flash-all-partitions-fastboot completed with success ,, the device didnt reboot automatically so i powered the device off from the bootloader and booted manually ,,
Still Stuck at Boot !
what should i do , please help !