3g not working please help - Moto G Q&A, Help & Troubleshooting

I bought moto g 1st gen xt1032 , i cant use 3g , i cant see 3g or h with signal bars only E when i turn on data , i have tried few solutions but none of them working , also i want to mention my mobile does not accept any code which we dial from dial pad which starts with *# .i am running latest lollipop version on it .

Related

HELP

I installed the latest cyanogenmod in my moto g which is XT_1033 dual sim variant.. But data connection isnt working on both my sims.. Aircel and TATA docomo.. other functions like calling, sending message etc are working. i can access net with wifi.. What's the possible problem? I wanna stay on cm as i wanna make themes for cm... . Help will be appreciated. Thanks..
did you configure the access point ... correctly

Lg g2 d800 at&t help needed

So I have this lg g2 d800 at&t version using cloudy g2.2 . I had this 3g problem that my phone could only use 2g and would never connect to 3g network. Then i went to this Mobile mall and the person did some QCN stuff in my phone . Now iam able to use 3g BUT the 3g sometimes work and sometimes doesnt work (sometimes there are 2 arrows below H and 3g works BUT sometimes there is 1 arrow below H and 3g doesnt work). Any help please ???
razerpkdeadly said:
So I have this lg g2 d800 at&t version using cloudy g2.2 . I had this 3g problem that my phone could only use 2g and would never connect to 3g network. Then i went to this Mobile mall and the person did some QCN stuff in my phone . Now iam able to use 3g BUT the 3g sometimes work and sometimes doesnt work (sometimes there are 2 arrows below H and 3g works BUT sometimes there is 1 arrow below H and 3g doesnt work). Any help please ???
Click to expand...
Click to collapse
What QCN Stuffs?
My 801 on Cloudy is also having similar problems that it is not connecting 3G. 2G is working fine.
I thinky a clean reflash can solve this issue
Sent from my LG-D801 using Tapatalk
zank19 said:
What QCN Stuffs?
My 801 on Cloudy is also having similar problems that it is not connecting 3G. 2G is working fine.
I thinky a clean reflash can solve this issue
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
I didnt tell you the whole story bro, actually this phone was sold to me as d802 . In settings->about , it was written it was an d802 but when i updated it to lollipop , there were touch problems in the phone. Then a guy named aftab (xda member) told me that your phone is refurbished and is actually a d800 (you can check your phone version by opening the back cover). Bottom line is this
1) check whether your phone is not refurbished i.e the version written at the back cover is the same as in settings->about
2) I dont know this QCN stuff that's why iam here !!!
razerpkdeadly said:
I didnt tell you the whole story bro, actually this phone was sold to me as d802 . In settings->about , it was written it was an d802 but when i updated it to lollipop , there were touch problems in the phone. Then a guy named aftab (xda member) told me that your phone is refurbished and is actually a d800 (you can check your phone version by opening the back cover). Bottom line is this
1) check whether your phone is not refurbished i.e the version written at the back cover is the same as in settings->about
2) I dont know this QCN stuff that's why iam here !!!
Click to expand...
Click to collapse
Ohh ok. Refurbs have issues. You are lucky that it did not brick.
Mine is a T-mobile 801. My issue is something else. 3G was working very well previously. I just kept on dirty flashing new versions of the ROM as well as changing kernels as well, and now the 3G is not detecting at all.
Even if I do a network search, only the RAT: GSM comes and not the CDMA.
I think I somehow messed with the baseband. I can't clean flash again, as it has a lot of data. And I m very lazy in doing backups as well ☺
That is why was looking if someone can help me with the correct baseband that I can reflash without reinstalling the ROM to fix this 3G issue.
Sent from my LG-D801 using Tapatalk
For the Love of Gawd....someone help me on this issue

LG G PRO 2 3G/4G issue

I just purchased LG G PRO 2 F350s ... but i am still unable to get 3G or 4G connected in Pakistan.. when i activate my Data, only G appears rather H or H+ for 3G or 4G.. What should i do to get my 3G or 4G LTE connected? please advise some solution .. Thanks
No 3G or LTE only G
Rafaqat : Same problem with me and my model is F350K
even i Flashed it with firmware KDZ

Emergency Calls Only on Jio sim

Hello .
I got a jio sim 10 days ago but i was getting no service in my moto g3 and then i put that sim in samsung phone, it got activated and i was able to place calls on Samsung device but then i put it back in moto g3 and again its showing no service.
I thought the sim was faulty but today i got the new sim card from jio and it was again showing No service so i put it again in Samsung phone and was able to place calls. The problem is the jio sim isn't showing any service in my phone only.
I have tried flashing Reseruction remix 6.0.1, stock lolipop rom and also cm12 but i am not getting any service at all.
Please help me.
aaqib67 said:
Hello .
I got a jio sim 10 days ago but i was getting no service in my moto g3 and then i put that sim in samsung phone, it got activated and i was able to place calls on Samsung device but then i put it back in moto g3 and again its showing no service.
I thought the sim was faulty but today i got the new sim card from jio and it was again showing No service so i put it again in Samsung phone and was able to place calls. The problem is the jio sim isn't showing any service in my phone only.
I have tried flashing Reseruction remix 6.0.1, stock lolipop rom and also cm12 but i am not getting any service at all.
Please help me.
Click to expand...
Click to collapse
Bro make sure the barcode u used to collect to sim is must be generated from the phn ij which u r going to use the jio sim..or u hav to registered via ur imei for working jio sim....
I felt same problem...cos i tookba codr from one of my frnds but i got no signal like u...but then i use old jio apk and genrated code successfully from my g3 using stock imei...(previously i tried the imei from which the barcode generated but not works)....then got a new sim by biometric id thru adhar card number.....activated within 5 mins and got all msgs quickly.....
reeeju said:
Bro make sure the barcode u used to collect to sim is must be generated from the phn ij which u r going to use the jio sim..or u hav to registered via ur imei for working jio sim....
I felt same problem...cos i tookba codr from one of my frnds but i got no signal like u...but then i use old jio apk and genrated code successfully from my g3 using stock imei...(previously i tried the imei from which the barcode generated but not works)....then got a new sim by biometric id thru adhar card number.....activated within 5 mins and got all msgs quickly.....
Click to expand...
Click to collapse
bro they didnt ask for any bar code , they just asked for my imei number and the sims are working in all other handsets except Moto G3. Actually my model number is XT1541 (UK 1gb edition) . I guess its 4g band doesnt work in india. I flashed stock MM too but still i am not getting any signal
hi , i also want to share my experience..
i got motoG3, i ported my sim to JIO
now i put the sim in Slot1 , i dont know why that didnt work.. ( i didnt get signal like you )
but when i changed it to Slot2 it started working...
maybe the reason is : i ported my sim which is in 2nd slot.. any kind of IMEI thing is stopping me to use that JIO sim in Slot1
hope this gives u some idea
aaqib67 said:
bro they didnt ask for any bar code , they just asked for my imei number and the sims are working in all other handsets except Moto G3. Actually my model number is XT1541 (UK 1gb edition) . I guess its 4g band doesnt work in india. I flashed stock MM too but still i am not getting any signal
Click to expand...
Click to collapse
Jio 4g bands are Band 3 (1800Mhz), Band 5 (850Mhz), Band 40 (2300Mhz).....but according to gsm arena i just saw ur lte bands are not matching to jio's ones....so i think in xt1541 u will get no signal
nandakis4 said:
hi , i also want to share my experience..
i got motoG3, i ported my sim to JIO
now i put the sim in Slot1 , i dont know why that didnt work.. ( i didnt get signal like you )
but when i changed it to Slot2 it started working...
maybe the reason is : i ported my sim which is in 2nd slot.. any kind of IMEI thing is stopping me to use that JIO sim in Slot1
hope this gives u some idea
Click to expand...
Click to collapse
Actually my phone is single sim and i just came to know that my modek doesnt support jio LTE band , So i might probably sell this phone.
Thanks anyways !!
reeeju said:
Jio 4g bands are Band 3 (1800Mhz), Band 5 (850Mhz), Band 40 (2300Mhz).....but according to gsm arena i just saw ur lte bands are not matching to jio's ones....so i think in xt1541 u will get no signal
Click to expand...
Click to collapse
yes bro, i also checked that and sadly i cannot use 4g here is india.
Thanks anyways for ur response
aaqib67 said:
yes bro, i also checked that and sadly i cannot use 4g here is india.
Thanks anyways for ur response
Click to expand...
Click to collapse
Hmmm....so which phn will u going to buy?...cos i also wanna buy a phn budget 16k....
Now I have using marshmallow stock rom in my moto g 2015(moto g3).Now i wanna downgrade my phone to lollipop..because marshmallow update drain more battery.....so want some help guys....
I have downloaded the STOCK_5.1.1_optimized_MOTOG3_Ver1.0 and Moto G3 5.1.1 Modem Firmware posted by aman singh 63 on XDA developers.....
Now I have a doubt in flashing the rom and firmware...please help me.....thank you
harikrishnanharry139 said:
Now I have using marshmallow stock rom in my moto g 2015(moto g3).Now i wanna downgrade my phone to lollipop..because marshmallow update drain more battery.....so want some help guys....
I have downloaded the STOCK_5.1.1_optimized_MOTOG3_Ver1.0 and Moto G3 5.1.1 Modem Firmware posted by aman singh 63 on XDA developers.....
Now I have a doubt in flashing the rom and firmware...please help me.....thank you
Click to expand...
Click to collapse
1. This is the wrong thread to post this.
2. The file you downloaded is stocks-modified, to restore stock, use firmware flashing guide by lost101 in general section.
3. All the information is properly documented there, make sure to search and read the posts before doing anything. Likely any query that you may have is already answered, if not, you an ask in that thread.
Broadcasted from Zeta Reticuli
In my mob Jio doesn't work at home but when I go around city it works fine. Model is xt1550.
Strangely it works good at home on my brother's Samsung mobile.
I guess it's frequency problem, may be.
I thought moto mobile's signal reception would be good but unfortunately I got deeply disappointed.

3G is not working in moto G XT1032(Single SIM) US version while using in India.

I have XT 1032 Moto G bought in US and i am using it in India now and it has not option of selecting preferred network between 3g and 2g in cellular network setting. I have checked all sim cards here in India only 2G is working.
How can i use 3G on it.
After Rooting and flashing other Rom(CM 13) , option to select preferred network will come or not?
Is this due to ,because this phone is build for US.
Plz help Me....Thanks in advance.

Categories

Resources