Database Info

[Resolved] [Q] How to root an Hyundai SP Octa Eagle 5"?

Hyundai SP Octa Eagle 5″ (Dual SIM, MT6592 based, KK 4.4.2, 1GB RAM, 8GB Flash)​
Since there seems to be no specific help at XDA-Devs for this device, I decided to open this thread to help anyone interested...
After much fiddling, I managed to root this phone by following s7yler instructions for a very similar phone:
JIAKE X3S MTK6592 1.7GHz Octa Core 5.0 Inch HD Screen 3G
http://forum.xda-developers.com/showthread.php?t=2662812​
I didn't succeed right away, so I also tried TowelRoot and Kingo, which also didn't work.
FYI, s7yler method also didn't work immediately: since I had already synchronized with my previous Google account and had a small OTA firmware update, I had to boot the phone into the "Factory Recovery" (Vol.Up+Power) and do a "Factory Reset" (bypass "no command", Vol.Down to move highlight, and Vol.Up to enter).
I then had the phone with no SIM or memory card (the default wallpaper was different, too), upon which I refrained from connecting to any wifi, and then retried the procedure that I had already tried many times before.
The VROOT application s7iler links to from his thread was unable to get the job done; I had to resort to "MT6592 ROOT TOOL 1.0" (from http://vondroid.com/resources/mt6592-root-tool.456/, free registration required), which is nothing but an unpacked older version of VROOT, which was able to update itself to a different version than the official one at the site and finally cracked the nut.
:victory:​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Don't forget to install Chainfire's SuperSU afterwards (and then you can get rid of the Chinese apps installed in the process, if you wish so)...
NOTE: there have been various reports around XDA-Devs forums that VROOT might be malware, so YMMV...
EDIT: just found a set of previous instructions for rooting this SOC at http://forum.xda-developers.com/showthread.php?t=2619101.

Misc forum links
EDIT3 (IMPORTANT): if after a reflash, you start seeing a "NVRAM ERROR 0x10" (or the lagging originated by it) in your Hyundai EAGLE, you need to make it go away by following the procedure detailed at http://forum.xda-developers.com/showthread.php?t=2730486 (ROOT REQUIRED)...​
One further question remains: how to install a reliable recovery (CWM/TWRP) fit for this model? Tips welcome... :cyclops:
EDIT: And... I have Recovery (check 1st hidden image in present post). By following instruction from this post at the MTKDroid-Tool thread, it as simple a clicking a couple of times. I'd rather have a bigger font or a touch recovery, but hey, beggars can't be choosers...
EDIT2: And (again)... one must only ask -- I now have fully touch TWRP recovery v2.7.1.0 (stable) installed (see 2nd hidden image below), thanks to yuweng's excellent tutorial/utility:
Easy Magic TWRP Installer for all MediaTek Devices ONLY
http://forum.xda-developers.com/showthread.php?t=2798257
(For lack of a better place, I'll dump here some of the pointers I gathered along the way...)
Codes:
Hidden tests screen - *#*#73#*#* and *#*#74#*#*
More hidden tests - *#*#4636#*#*
Engineer Mode -- *#*#3646633#*#*
(If you have SuperSU, you can access it with *#*#1234#*#*)​
Essential tool for backing up stock ROM (see image; root required):
[UTIL][WIN][MT65xx] MTK Droid Root & Tools | MediaTek Android Smartphone
http://forum.xda-developers.com/showthread.php?t=2160490
Note: following images are actual captures from the current device...
​
You might have crossed paths with the [THREAD="2784183"]report of a bug[/THREAD] that supposedly affects most Mediatek based phones; I did, and tested positive with the recommended app. But after sending myself a test SMS, I can say happily that's not true for the Hyundai EAGLE -- KitKat to the rescue?
I disliked the default Hyundai boot up animation, so I searched for alternatives; the following instructions totally work for the EAGLE:
http://librentelequia.blogspot.be/2014/02/android-44-kitkat-boot-animation-for.html
According to a GSM Arena search, these are possibly the most compatible devices, whose development to watch:
[THREAD="2910621"]Archos 50c Oxygen[/THREAD] ( no KitKat)
BLU Life 8 (@AndroidForums)
[THREAD="2893590"]HTC Desire 616[/THREAD] Dual Sim (@AndroidForums + 88p Manual)
Lenovo A850+
[THREAD="2639280"]Lenovo S939[/THREAD] (6"! @forums.lenovo.com; @Needrom.com)
[THREAD="2872896"]Micromax A290 Canvas Knight Cameo[/THREAD] (4.7"! @Hexamob.com)
[THREAD="2890011"]Micromax A310 Canvas Nitro[/THREAD] (2GB RAM! [THREAD="2882550"]Rooting[/THREAD]; [THREAD="2893678"]Emotion UI 2.3 KK4.4.2[/THREAD];@Modaco.com; GSM-Hosting.com DL area)
[THREAD="2859239"]Panasonic P81[/THREAD] (5.5"!)
Yezz Andy A5QP
Xiaomi Redmi Note​http://www.gsmarena.com/results.php3?nIntMemMax=8000&sFreeText=mt6592
The Eccooqtium 5,5" Plus (JB, 5.5"!) is a comparable product sold in Spain by the real manufacturer of the Hyundai EAGLE :
http://www.i-joy.es/eccooqtium-55-plus-octa-core/
After much searching, it seems the [THREAD="2785891"]Coolpad F1[/THREAD] (2GB RAM!) is the most popular comparable device:
@Modaco.com: http://www.modaco.com/forum/778-coolpad-f1/
@NeedROM.com: http://www.needrom.com/category/coolpad/8297-f1/
@HTCMania.com (Spanish): http://www.htcmania.com/showthread.php?t=888298
Other XDA-Devs posts with relevant devices/issues:
bluemask69 @ Elephone P8 MTK6592 1.7GHz Octa Core 5.7 Inch FHD 1920x1080 (report of similar baseband)
http://forum.xda-developers.com/showthread.php?p=52522847#post52522847
Unrootable: HDC G9006V MTK6592 4.4.2 KitKat (various rooting strategies)
http://forum.xda-developers.com/showthread.php?t=2785111
Editing EBR1/EBR2 @ New Primary Partitions for Mtk6577/6582/6589/6592/8382
http://forum.xda-developers.com/showthread.php?p=55714041#post55714041
[guide][release]intex aqua octa(mt6592) rooting ...
http://forum.xda-developers.com/showthread.php?t=2612866
New Zopo Zp 998
http://forum.xda-developers.com/showthread.php?t=2485802
Iberry Auxus Nuclea X :: > All Things Thread <
http://forum.xda-developers.com/showthread.php?t=2749167
Some Hyundai EAGLE benchmark results were published at http://browser.primatelabs.com/geekbench3/857225; an extensive Mt6592 SOC benchmark test review can be found at http://www.hasaan.com/2014/09/mediatek-mt6592-review-benchmark.html; see my own AnTuTu benchmark and other specs screenshots below...
Hyundai SP Octa Eagle 5″ @ *** New Device Forum Requests ***
http://forum.xda-developers.com/showthread.php?p=56494469#post56494469

thanks
buy this phone and believed he was alone in the world

dioxnet said:
thanks
buy this phone and believed he was alone in the world
Click to expand...
Click to collapse
So did I until your post...
Have you rooted it?
Sent from my K00L using Tapatalk

pnin said:
So did I until your post...
Have you rooted it?
Sent from my K00L using Tapatalk
Click to expand...
Click to collapse
:good: root with its instructions, thanks

dioxnet said:
:good: root with its instructions, thanks
Click to expand...
Click to collapse
For the record, then -- two happy customers. Now, if only I could find a suitable cover...
Incidentally, just before Christmas the Hyundai EAGLE was on sale around here for only EUR 99! :crying:

pnin said:
For the record, then -- two happy customers. Now, if only I could find a suitable cover...
Incidentally, just before Christmas the Hyundai EAGLE was on sale around here for only EUR 99! :crying:
Click to expand...
Click to collapse
cover, do not understand how there is no original

hello good I have a Hyundai Eagle octa which had a problem unistaller something the rom and not the camera connects more can not find the rom even a recovery of this cell someone could help me I have done all

Your instructions worked for me! Thanks!
Now I have a issue...
I was increasing app storage but, by somehow, my backup file is corrupted... Do you have the standard rom?
Thank you,
RDS

Hey guys. I'm having a problem with my hyundai eagle battery (it goes from 100% to 60% in less than 30min) can you tell me where could i a new one from ? Or what can i do to make it last a bit longer than -40% per 30min ??
Thanks.

It looks like your battery is done for.
I don't know where this specific batteries can be gotten, but luckily it's a replaceable: just take it out and go around the shops looking for something compatible -- 3 contact 3.7V Li-Polymer 2200mah; watch out for dimensions and polarities, though...
Tapatalked from my V500

hello, please urgent
I trying to change partition size, I softbrick
I need the phone's ROM stock, someone could
remove it and give it to me, thanks

Internal storage just 1 gb?
hi, I'm facing an issue related with a lack of space and performance. I don't have internal storage space (1gb) but the phone storage reports 4.80Gb free that I can´t access. I appreciate your help to manage this situation, I understand that is a known issue but I'm not an expertize so any details instruction’s will be very helpful

Hi pls help for a hyundai wolf octa core rooting
Hi i'd like to know if somebody tried to root a Hyundai wolf Octa core?
I can't find anyting on the web about it.
Am i the only one who bought it?
Build nr. WOLF_20141128_V0.6
ANDROID 4.4.2
KERNEL 3.4.67
BASEBAND VERSION MOLY.WR8.W1315.MD.WG.MP.V34P8, 2014/10/14 09:39
Thanks a lot

Easy root now to Hyunday Eagle.
Now its very easy rooting.
Kingoroot - search on Play Store

plz
guys i really need the stock rom for this device i cant find it

[ROM][UNOFFICIAL] CyanogenMod 12.1 [5.1.1] Wiko DarkMoon [MT6582] and Clones

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM /PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS,
* AND MAYBE BUY ME SOME BEERS
*/
Hello Guys !
In this thread you will find my CyanogenMod 12.1 (Android 5.1.1) Rom for the Wiko DarkMoon (Mediatek MT6582 SoC), and clones.
Please be sure to read (and re-read) carefully, to avoid unnecessary questions.
This is an Unofficial Source Build, so it will NOT be supported by the CyanogenMod Team
It also work without any issues on the clones:
- Micromax a200 Canvas turbo Mini
- BLU Life Play S
- Myphone Agua Iceberg Slim
- QMobile Noir A910
CyanogenMod 12.1 Status:
Working:
- RIL: Telephony (Calls / etc) (2G and 3G) (In Both SIMs)
- ART
- Sensors
- LED's
- Rear Camera ( pictures )
- Front Camera ( pictures )
- FlashLight
- Sound
- Bluetooth
- Wifi
- Microphone (For Calls and in some apps)
- Data connection
- CyanogenMod related features (Theme Manager, etc ... )
- GPS and aGPS
Not Working / Needs Improvements :
- Camcorder ( WorkAround: use 3rd party video recording apps from Play Store)
- USSD codes. only works in some Providers
Single / Dual SIM Behavior :
On Dual-SIM (when using both SIM slots) :
3G Will be forced to Slot 2 (Depending on your SIM Provider)
Data connection will only properly work on Slot 2 (Depending on your SIM Provider)
On Single-SIM (when using only one SIM slot) :
You can toggle between 2G / 3G just fine
Data connection will work just fine
Also when in Single-SIM and to avoid bugs with Data connection
Change this line in build.prop (/system):
Code:
persist.radio.multisim.config=dsds
to
Code:
[B]#[/B]persist.radio.multisim.config=dsds
Flash Instructions:
Backup, Backup, Backup ...
You need to be on the Unofficial KitKat Base (due to the new KK partitions)
Put the cm-12.1-xxxxxxxx-UNOFFICIAL-darkmoon.zip on external SDCard
Flash the new CWM Recovery 6.0.5.1 (This is no touch recovery), you can flash with flashify app, or by SPFlashTools.
Full Wipes
Flash Rom
Flash minimal GAPPS 5.1
Enjoy
GPL Compliance:
Kernel: https://github.com/dragonpt/Kernel_3.4.67_KK_Wiko_DarkMoon
Device: https://github.com/dragonpt/android_device_wiko_darkmoon
Vendor : https://github.com/dragonpt/android_vendor_wiko_darkmoon
Credits:
CyanogenMod Team
OMNI Team (specially XpLoDWilD and Dr-Shadow)
chrmhoffmann
fire855
ariafan
axet
Santhosh M
moonrotation--> Al3XKOoL
DerTeufel1980
XDA:DevDB Information
[ROM][UNOFFICIAL] CyanogenMod 12.1 [5.1.1] Wiko DarkMoon [MT6582], ROM for the Android General
Contributors
superdragonpt
Source Code: https://github.com/dragonpt/
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Newest CWM
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 2.0
Beta Release Date: 2015-06-29
Created 2015-06-27
Last Updated 2015-08-22

Changelogs
Beta 5 (August 10 2015)
FIX: GPS and aGPS ( @DerTeufel1980 , thanks for the help)
Minor issues adressed
Beta 4 (July 17 2015)
Sync with CM
Fix: Camera problems on latest 5.1.1 source
Fix: Calls problems on latest 5.1.1 source
Small other tweeks
Beta 3 (July 12 2015)
Sync with CM (and fixed the sources)
Now on the latest Google's android LMY48G (now at 5.1.1_r6)
(Changelog is Huge, please check CyanogenMod full changelog on their site or gerrit )
Removed some pre-compiled vendor .blobs, we don't need them now.
Fix: Some telephony issues
Beta 2 (July 05 2015)
(Built on 29 June 2015)
Sync With CM (29/June)
FIX: WiFi (New LP WPA_supplicant, etc)
ADD: External SDCard RW Permissions
Other small issues addressed
Beta 1 (June 27 2015)
First Open release
Sync with Latest CM source
Beta 0.01 (June 22 2015)
Open Beta for testers
Alpha Builds (xxx -> June 21 2015)
Internal Builds
Downloads:
Are on XDA dev-DB (The "Download" TAB)
If you are in TapaTalk, or can't see the page Tabs press here:
http://forum.xda-developers.com/devdb/project/?id=10541#downloads
Alternative Downloads:
New TWRP For CyanogenMod / Lollipop
--> Flash from your current recovery
https://www.androidfilehost.com/?fid=24052804347767497
5.1 Gapps
https://www.androidfilehost.com/?fid=24052804347772344
.

F.A.Q
Q: Is this Rom rooted?
A: Yes, this is CyanogenMod
--> Enable Dev. Options by tapping 7 times on Build Number > Enable root there
Q: I can't flash this Rom on recovery, why?
A: You need to update your recovery in order to flash this CM Builds , check under the Download Section
Q: Is this ROM Multi-Language ?
A: Yes ...
Q: How can i change the Kernel Settings (Governors/ etc) ?
A: CyanogenMod haves this features in-built under Settings> Performance
--> there you can change Governors / IO's , etc
Q: Where are the Developer Options?
A: Go to Settings>About Phone, and tap 7 times on the Build Number
Q: Where's the FM Radio?
A: CM doesn't support FM Radio, for MTK's , im working on it
Q: I cant Sync with Google (contacts, etc), why?
A: Just make sure, gps is OFF and reboot, it'll work now
Q: Is Xposed Framework and his modules compatible with CM 12.1 ?
A: Xposed for Lollipop 5.1 is still W.I.P, test it yourself, with precaution...
Q: Can i revert to stock ROM after ?
A: Sure you can! You just need to flash the Stock Wiko JellyBean 4.2 ROM via SPFlashtools. Or just download the wiko software tool from their site.
Q: Can i revert to your Unofficial KitKat ROM after ?
A: Sure, just revert to the older recovery, and flash the unofficial kitkat Rom
Q: I Love your work, how can i thank you?
A: You can press the "Thanks" button, and if you wish, you can pay me an beer(s) :fingers-crossed:
.

Thank you so much for this!!!! So if i use a third camera app from the playstore, video recording will work?

claudiuh said:
Thank you so much for this!!!! So if i use a third camera app from the playstore, video recording will work?
Click to expand...
Click to collapse
Yes some will work just fine, i use this one:
https://play.google.com/store/apps/details?id=com.androidillusion.videocamillusion&hl=en
cheers

Excelent work, thank you
Doesn't memorise my wifi network. Can anyone confirm?
Also, how do we move apps to sd card?

Downloading it now. Okay wait so if i want to flash back to kk i need to be on stock wiko first? U mean i cant just flash unofficial kk from cm12?

Great Work
You are a beast man , keep working

awesome work bro !!!!

Good work !!
Good custom rom it's working but it's having problems with sync google account. It's maybe because the Gapps?. And the battery is quickly discharge
I'm sorry if my english is incorrect because I don't speak english fluent
Thanks for your work :highfive:

angelobap96 said:
Good custom rom it's working but it's having problems with sync google account. It's maybe because the Gapps?. And the battery is quickly discharge
I'm sorry if my english is incorrect because I don't speak english fluent
Thanks for your work :highfive:
Click to expand...
Click to collapse
hi
from the FAQ:
Q: I cant Sync with Google (contacts, etc), why?
A: Just make sure, gps is OFF and reboot, it'll work now
cheers

Both Sim Blocked
The rom is perfect I love it, and is soo smooth. But I got problemwith the sim it blocked Both and I don´t Know how to fix that.

superdragonpt, this is the rom that you will be remembered for. Excellent job. This is not a port, its a creation! You just made a kernel out of scratch just so you can bring lollipop to our devices so I thank you for that. While we both know that the rom is far from perfect, i hope you will continue to bring us updates and bug fixes. Wish you all the best superdragonpt!

@snapdragonpt i am again facing camera bug....front camera blackish at edges.....quality is not upto mark.....though i didnt face that dual sim problem ...i can easily use 3g on slot 1.....viasuals are good.....performance is good.....but no contact display option for sim....and everytime sim blocked,....minor bugs u can fix....thas all i found ..hope it will help you for a stable version

Hi
Yes, you guys should understand that everything concerning CyanogenMod + Mediatek it's all WIP (Work in Progress)
CM doesn't support Mediatek SoC's (Android ONE, it's an all different story ...)
Plus, everything developed for this device is all WIP, since we never ever got any source .
- The KitKat Rom is unofficial, and made from scratch ...
- The CyanogenMod 11 & 12.1 also.
There's minor issues (since my unofficial KK) that are related with my kernel (cameras needing manual compensation, etc )
Regarding cameras: that's the best i was abled to do without any kind of sourcecode, i had to write our own drivers...
If you manually adjust the exposure / whites, it takes good pictures, but don't expect it to be like in the (very old) JellyBean 4.2.2 (stock) Rom.
Ontopic:
WIFI is fixed
Trying to fix some other small issues
cheers

superdragonpt said:
Hi
Yes, you guys should understand that everything concerning CyanogenMod + Mediatek it's all WIP (Work in Progress)
CM doesn't support Mediatek SoC's (Android ONE, it's an all different story ...)
Ontopic:
WIFI is fixed
Trying to fix some other small issues
cheers
Click to expand...
Click to collapse
We understand superdragonpt and we are willing to wait, i just hope you will not desert this project until atleast most of the bugs are fixed. I can list you all the bugs that i have found if it will make your job easier.
BUGS:
1. Yes, the blueish tint. While it is adjustable on KK and CM11, CM12.1 tells it different, we dont have the white balance option on our default camera app. Im certain using third party or post editing the image will fix it though.
2. No move apps to SD. This is common on almost ALL lollipop roms so no surprises there, we just link our apps with Link2SD.
3. We have some dangerous bug concerning brightness. Turn Adaptive Display on (auto brightness) and then manually turn down the brighness and u get a pitch black screen. Dangerous if you dont know the position of the slider.
Alternatively if u turn Adaptive Display off and turn Battery Saver on, you will get a pitch black screen if you turn the brightness to its minimum.
4. LED notifications, yes they light up but they stay lit. If u get a low battery youre supposed to get a blinking red, but with this bug u get a continuous red light. Same with texts but with an endless green. Im sure third party apps can do something regarding this.
5. Heads up notifications does not work with every app. Turning it off did not fix it either. The only heads up notif i get is from facebook and calls, but it wont give u heads up for text messages or games.
6. There is a youtube bug. This one im not sure if its an isolated problem. If you are watching videos sometimes it will stop and refuse to play unless you click on a new video and click back to the one you were watching.
Other than that, this rom is great! It is not as stable as your KK 4.4.2 which is my personal favorite I must say. But bringing lollipop to the table is good enough already so kudos to you. Thank you superdragonpt.

halogenn said:
We understand superdragonpt and we are willing to wait, i just hope you will not desert this project until atleast most of the bugs are fixed. I can list you all the bugs that i have found if it will make your job easier.
BUGS:
1. Yes, the blueish tint. While it is adjustable on KK and CM11, CM12.1 tells it different, we dont have the white balance option on our default camera app. Im certain using third party or post editing the image will fix it though.
2. No move apps to SD. This is common on almost ALL lollipop roms so no surprises there, we just link our apps with Link2SD.
3. We have some dangerous bug concerning brightness. Turn Adaptive Display on (auto brightness) and then manually turn down the brighness and u get a pitch black screen. Dangerous if you dont know the position of the slider.
Alternatively if u turn Adaptive Display off and turn Battery Saver on, you will get a pitch black screen if you turn the brightness to its minimum.
4. LED notifications, yes they light up but they stay lit. If u get a low battery youre supposed to get a blinking red, but with this bug u get a continuous red light. Same with texts but with an endless green. Im sure third party apps can do something regarding this.
5. Heads up notifications does not work with every app. Turning it off did not fix it either. The only heads up notif i get is from facebook and calls, but it wont give u heads up for text messages or games.
6. There is a youtube bug. This one im not sure if its an isolated problem. If you are watching videos sometimes it will stop and refuse to play unless you click on a new video and click back to the one you were watching.
Other than that, this rom is great! It is not as stable as your KK 4.4.2 which is my personal favorite I must say. But bringing lollipop to the table is good enough already so kudos to you. Thank you superdragonpt.
Click to expand...
Click to collapse
Hi
~
Thanks for the bug list, it really helps, since im wasting most of my time compiling and check issues.
1: The new CyanogenMod 12.1 camera lacks some settings, so, yes, you can't adjust camera settings just like in KK.
--> Workaround, use another camera app from the Play Store
--> Same goes for recording videos ( there's an Play store link on first page for a camera app, that works great for recording videos ...
2: There's nothing i can do regarding this
3: Adaptive Display : Yes it needs some re-calibration
4: Led: It works but doesn't blink (minor bug )
5: Seems to be an problem with CM release
6: Should be fixed on next release
Thanks for the feedback
cheers

superdragonpt said:
Hi
Yes, you guys should understand that everything concerning CyanogenMod + Mediatek it's all WIP (Work in Progress)
CM doesn't support Mediatek SoC's (Android ONE, it's an all different story ...)
Plus, everything developed for this device is all WIP, since we never ever got any source .
- The KitKat Rom is unofficial, and made from scratch ...
- The CyanogenMod 11 & 12.1 also.
There's minor issues (since my unofficial KK) that are related with my kernel (cameras needing manual compensation, etc )
Regarding cameras: that's the best i was abled to do without any kind of sourcecode, i had to write our own drivers...
If you manually adjust the exposure / whites, it takes good pictures, but don't expect it to be like in the (very old) JellyBean 4.2.2 (stock) Rom.
Ontopic:
WIFI is fixed
Trying to fix some other small issues
cheers
Click to expand...
Click to collapse
so there is no way to fix camera you said only on some devices some are working ? you tried to replace modules from jb ? should i try ? but i cant coz i have this device as my daily driver........ i know whatever u r doing is just great n i appreciate you...in fact we all do !
As i know micromax a120 have same specs even unite 2 have same chipset, can you try using unite 2 lollipop module ? i think someone should try if you have this device as a spare device !
Sent from my Micromax A200 using XDA Free mobile app

Is there any way to move apps to external sd? I always get an error with link2sd, and my internal memory is already full

Akash sky said:
so there is no way to fix camera you said only on some devices some are working ? you tried to replace modules from jb ? should i try ? but i cant coz i have this device as my daily driver........ i know whatever u r doing is just great n i appreciate you...in fact we all do !
As i know micromax a120 have same specs even unite 2 have same chipset, can you try using unite 2 lollipop module ? i think someone should try if you have this device as a spare device !
Sent from my Micromax A200 using XDA Free mobile app
Click to expand...
Click to collapse
It wont work because micromax a120 has a different kernel despite having identical specs. Flashing it would result in a brick.
Goncalo29 said:
Is there any way to move apps to external sd? I always get an error with link2sd, and my internal memory is already full
Click to expand...
Click to collapse
Yes moving apps to sd doesnt work because our "external sd" is just emulated from internal sd. Which means our external and internal is just one. I dont know, i think thats just how lollipop works. Link2sd does work fine for me. Im using the free one from play store because if you try to use a cracked link2sd pro ull have a "Package invalid" error.

[ROM][UNOFFICIAL][7.1.1][ferrari] CyanogenMod 14.1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 7.0 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What's working :
Boots
RIL (Calls, SMS, Data)
Wi-Fi
Camera
Video Playback
Audio
Sensors
LED
GPS
What's not working :
Flash , same as mm , add in power menu and reboot , it will work
FM radio
Instructions :
Flash firmware 6.6.10.1
Download the latest build and GApps
Reboot to recovery
Flash the latest build and GApps
Reboot
Downloads:
AFH LINK
Google Apps: http://opengapps.org/
Device wiki:
Official wiki link - currently not available , wil be added soon
Credits:
@faizauthar12 for always being there, @Nihhaar for the numerous inital tests (which dint pan out so well)
and all other members of the tele group for the immense testing that i made them do anand, pranav kumar, johndoe for his wise comments thanks to others who i forgot to mention
CyanogenMod Team
Xiaomi: For providing the Kernel Source Code
XDA:DevDB Information
[ROM][UNOFFICIAL][7.1.1][ferrari] CyanogenMod 14.1, ROM for the Xiaomi Mi 4i
Contributors
Rohan purohit
Source Code: https://github.com/CyanogenMod
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Version Information
Status: Beta
Created 2016-12-11
Last Updated 2016-12-22

Source Code:
Device Tree(s):
android_device_xiaomi_ferrari: https://github.com/CyanogenMod/android_device_xiaomi_ferrari/tree/cm-14.1
(Gerrit)
ferr-dev-team
Kernel Tree:
android_kernel_xiaomi_ferrari: https://github.com/CyanogenMod/android_kernel_xiaomi_ferrari/tree/cm-14.1
ferr-dev-team
Vendor:
proprietary_vendor_xiaomi: https://github.com/TheMuppets/proprietary_vendor_xiaomi/tree/cm-14.1 (For WIP:
[url]https://github.com/Ferrari-Dev-Team/android_vendor_xiaomi_ferrari[/URL]

Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.
Frequently Asked Questions:
Q)OH MY,.. CRASHES!?
A)This is a very early build of CyanogenMod running nougat and things are still WIP.
You may experience number of crashers here and there. These will be get fixed with time.
Q)Why is this UNOFFICIAL?
A)Because, we need our device to be bug free before enabling official CyanogenMod nightlies.
Q) Is VoLTE supported?
A) No. Not UNLESS XIAOMI decides to release modem with enabled volte ( OR anyone here can port it , dont ask questions about how)
Q) Where are Developer options?
A) Go to Settings > About phone, and press five times on Build number.
Q) How can I enable root access?
A) Go to Settings > Developer options > Root access, and enable it for apps, adb or both.
Q) How do I update GApps? (Also useful if you have GApps related problems).
A) Reboot to recovery. Wipe System, Cache and Dalvik Cache. Install ROM + GApps. (Yes, without rebooting). Reboot.

great work..

Great Work
Awesome work bro
Keep it UP
-TechExhibeo

Excellent! From the problems that I noticed, problems with charging. Log unfortunately can not provide. When plugging charging it just can not be charged. In the off state, all is well, and if enabled, the phone will start charging

Damnnn....Why I am getting so many good news now days.Nougat is already here.....SHERLOCK will be back on 1.1.2017. ..I am feeling good.
Thanx @Rohan purohit.
Only for u guys this poor device is alive .

this is what i am talking about baby
@Rohan purohit
remember, FM Radio

I didn't expect this... Lol...
Btw is there some easy way to take log? I'll to help with log..
Edit : i just found an app to do logs!!!

Screenshots

Terrific work @Rohan purohit

Thank u man @Rohan purohit. Don't forget about the sensors which is the main bug in CM 13

Av. Sngh said:
Thank u man @Rohan purohit. Don't forget about the sensors which is the main bug in CM 13
Click to expand...
Click to collapse
now i am curious
did you already flash it?
and see the OP
sensor is working :laugh:

faizauthar12 said:
now i am curious
did you already flash it?
and see the OP
sensor is working :laugh:
Click to expand...
Click to collapse
No i Haven't flashed it yet coz this phone is my daily driver. For now the sensors are working according to the Dev. Lets hope they keep working in CM 14. Don't rewlly care about FM radio and Bluetooth.
BTW someone suggest me a good backup softwqre to take backup to PC before flashing.

finally thanks @Rohan purohit you the real MVP

Sorry for a little bit of offtop, but this is the most watching thread now I believe
The link to the telegram chat from this post ( http://forum.xda-developers.com/mi-...4i-ferrari-t3355702/post68651421#post68651421 ) has expired. Could someone please share the new one. I'd like to join this group to be one of the beta testers I have computer with adb on it, usb cable and pretty fast internet
Thanks in advance
PS. And of course I have Mi4i in my pocket

Wiped dalvik and cache,
Flashed this rom
Flashed gapps
Rebooted
Awesome work devs , didnt lost anything( i hadnt even taken backup before flashing and yes this is my daily driver ) ...looked like an update only.
When i think abt it , our device is running the latest version of android. I never thought a day like this might happen...
Kudos to all the devs... ?

I'd like to quote Bohemian Rhapsody by Queen here: "Is this the real life? Is this just fantasy?"

Hi everybody,
at first, I'm looking to this forum every day. Thank you for your hard work to all!
Since I'm new to flashing with Xiaomi Mi4i, can someone please help me with the instructions?
"Flash firmware 6.6.10.1" - where do I get the firmware?
"Download the latest build" - is this the first link provided under "Download" in the first post?
Are the sensors working with both things above or do I have to use a custom kernel or something?
Also, will my data stay available if I just do these steps or is everything lost? (I currently run the Global Dev version from Xiaomi officially)
Thanks!

thewavelength said:
Hi everybody,
at first, I'm looking to this forum every day. Thank you for your hard work to all!
Since I'm new to flashing with Xiaomi Mi4i, can someone please help me with the instructions?
"Flash firmware 6.6.10.1" - where do I get the firmware?
"Download the latest build" - is this the first link provided under "Download" in the first post?
Are the sensors working with both things above or do I have to use a custom kernel or something?
Also, will my data stay available if I just do these steps or is everything lost? (I currently run the Global Dev version from Xiaomi officially)
Thanks!
Click to expand...
Click to collapse
You're alone in this world, nobody is going to help you (atleast for a problem like this)
Search my dear friend, is what I would suggest. Search as much as you can because we've all become habituated to ignore posts like these.

Lenovo Tab 2 A10-70 MM 6.0 Custom Roms and Ports

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have opened this thread for the discussion of and sharing of specific information regarding the Lenovo Tab 2 A10-70F/L running on Android 6.0 MM.
This is to reduce the need to post in the "main" thread for this device which is HERE
The thread is open to ALL so please do not direct all question or comments towards me but ask and comment generally.
The thread should be restricted to Customisation and Porting of the Stock ROM.
Hints Tips and Tweaks.
The thread should Not include anything related to xposed PLEASE as this has a dedicated forum thread.
WARNING SPFlashTool and the use of will NOT be discussed in this thread. You are expected to know the very basics already like using SPflashTool, ADB, Fastboot and TWRP.
Simple Google search's will reveal all the info you need about the aforementioned.
The #2 post below this one will contain the leaked MM link TWRP and official Kernel source code etc etc
This OP will be updated as time goes by so I am open to suggestions

Where is everything??
KEY: F= WiFi only version L= CELLULAR version (takes a SIM card) MM= Marshmallow (Android version 6.0) LP= Lollipop (Android version 5.0) KK= KitKat (Android version 4.4)
Kernel Source: HERE
FOR USE WITH RECOVERY OFFICIAL STOCK OTA's 6.0 MM ROM's L & F versions: HERE
FOR USE WITH SPFlashTool OFFICIAL STOCK 6.0 MM ROM's L & F versions: A10-70F_S000214_M_170207_ROW.7z (WiFi) and A10-70L_S000214_M_170606_ROW.7z (SIM) Passwords and credits located HERE
TWRP RECOVERY "L" and "F" 6.0 MM compatible: HERE
Thanks to @Tzul
Empty image used to Wipe/Format your Userdata Using SPFashTool: HERE
Thanks to bigrammy
The Modified Boot.img's "Systemless SuperSU Ready" L & F versions: for the above Firmware's are HERE
Thanks to @Tzul again.
LEAKED STOCK MM ROM: HERE I Recommend using the Official Stock MM ROM's above but will leave this here for reference.
Thanks to @zMILWAUKEE again.
Noob's guide to Flashing the OFFICIAL STOCK MM ROM's L & F versions above:
NOOB's Read this post before you ask anything!!
Add Modified SPFlashTool Version OFFICIAL STOCK MM ROM's L & F versions from above:
Read this post HERE for more info
Notes: Flashing this stock MM will automatically encrypt your data and "systemless" root will not work due to the old style Mediatek boot.img format (MTK Headers) these are not supported by SuperSU. See above for compatible version boot.img by Tzul.
Thanks to @Tzul for all the info TWRP's and OTA's Too many to link to. :good:
Thanks to @suhridkhan for the Main device thread HERE
There are so Many others who deserve Thanks concerning this device but listing everyone would be impossible for me to do.
Any help or advice from other Mediatek threads would be most welcome but especially from these guys @superdragonpt @DerTeufel1980 @fire855 and others working on the M.A.D project https://github.com/MediatekAndroidDevelopers
xda background info here
Help input or advice with regard to maybe building from source porting from source would be invaluable Thanks.
CPU is mt8165 > aka mt6752 build enviroment but is The Quad Core Version aka mt6732
Lenovo Tab 2 A10 specifications and features:
10.1-inch Full HD IPS LCD display with 1920×1200 resolution
Wifi model: 1.5GHz quad core 64-bit MediaTek MT8165 processor, LTE model: 1.5GHz quad core 64-bit MediaTek MT8732 processor
2GB of RAM
16GB of internal storage, MicroSD expansion up to 32GB
171 x 247 x 8.9mm, 509g
8MP rear-facing camera
5MP front-facing camera
Non-removable 7200mAh battery
Android 4.4 KitKat (Kernel Source) 4.4 5.1 and 6.0 official ROM's
Dolby ATMOS 3D Surrond Sound
Available in Pearl White and Midnight Blue

User contributed Hints Tips and Fixes
These are placed here for convenience only and should by no means take the place of reading this thread thoroughly​
Custom Boot Animations HERE Posted by @chris5s
Enable Multi Window and Multi User Modes + SD_card Storage + Sound: HERE Posted by @coolbeans2016
SPFlashTool flashable Custom stock based ROM HERE Posted by @bigrammy
TWRP flashable Fix for Changing the Lockscreen Wallpaper on the above ROM HERE Posted by @bigrammy
Quick photo tut for newb's to remove the Sim icons etc on WiFi Only (F) models. HERE Posted by @bigrammy
Enable Double Tap to Wake "DTTW" HERE Posted by @chris5s

Custom Boot Animation
-Delete/rename/move original start.mp4 from system/media
-use a rooted file explorer to place new start.mp4 in the same folder
-Reboot and enjoy :good:
Download
Nice idea @bigrammy
Peace

chris5s said:
Custom Boot Animation
-Delete/rename/move original start.mp4 from system/media
-use a rooted file explorer to place new start.mp4 in the same folder
-Reboot and enjoy :good:
Download
Nice idea @bigrammy
Peace
Click to expand...
Click to collapse
First Poster :victory:
Thanks mate. :good:

Custom Stock ROM v1
Due to confusion and minor bugs that required some user input I have removed the TWRP version and replaced it with this SPFlashTool version.​
Before Flashing:
This ROM will wipe your internal sd_card including Pictures, Music, etc, etc on it. BACKUP First You have been warned!!!
This ROM is NOT a full Android upgrade so please make sure you are already on Android 6.0 (MM)
Whats Different bigrammy??
boot.logo Now Black instead of the White burning out your eyeballs one.
bootanimation. Now Black Pixel animation.
Default wallpapers Desktop and lockscreen Now Pixel Blue (no more boats)
Pixel Launcher
Assistant enabled
Sony id enabled (Allows you to install some Sony app's from the play store like keyboard)
Ported Sony Music Album and Video directly from my Sony C4 mt6752 device.
These are Just to name a few but has lots of other minor mods I have forgotten about.
Installing and things to Note:
MM TWRP is included in the ROM.
Please flash the entire ROM or I/we will not know whats causing the problems should there be any.
After the flash is complete boot to recovery ONLY and flash Magisk Latest Stable release HERE
First time boot takes 10 minutes so do not panic. As soon you see the boot animation go make a cup of coffee and wait.
It will boot guaranteed if you see the bootanimation. :fingers-crossed:
The reason it seems to take so long is that the boot animation continues until fully booted so you do not see the usual dialog box "updating app 1 of xxx" etc
Ensure you update Google Play Services via the playstore (Doing this First ensures smooth and uninterrupted updates of the other playstore apps)
Update all other app's listed in playstore/my apps
Note app's like trackid will only display in portrait as our device res is not officially supported.
Credit to HootanParsa for the Awesome file explorer his thread is HERE Please leave your thanks there too.
Ensure to check all app permission and choose the Pixel launcher as default.
See post #3 for instruction on hiding the SIM icon in the notifications bar.
Lastly But Most important please LEAVE SOME FEEDBACK
I know it will not be to everyone's tastes so feel free to mod add remove install what you like.
Download Link:
Download HERE from G-Drive
Screenshots:
Lockscreen:
Desktop:
App drawer:
Music Portrait:
Music Landscape:

@bigrammy I'm sure it's on your to-do list, but how about, in the first post or placeholder posts, links to
- TWRP
- Original MM ROM
- Individual mods and/or guides to customisations/tweaks
Otherwise i guess they run the risk of getting swallowed up in the thread...Not that that has ever happened
Cheers

chris5s said:
@bigrammy I'm sure it's on your to-do list, but how about, in the first post or placeholder posts, links to
- TWRP
- Original MM ROM
- Individual mods and/or guides to customisations/tweaks
Otherwise i guess they run the risk of getting swallowed up in the thread...Not that that has ever happened
Cheers
Click to expand...
Click to collapse
Hi chris5s,
Yes good point & I have been mulling this over since I started this dedicated MM 6.0 thread.
I really don't want to be dragged into the world of noobs and SPFlashtool, driver installation, flashing, etc as they will swear blacks white and whites black regardless of how well it's all explained. So I will put up the links along with a strong warning that I/we will not expand on SPflashTool drivers etc etc for installation of the Original MM ROM and TWRP recovery.
All the Best.
Edit: All Done anything I missed let me know.

@bigrammy Excellent work on the thread.
Since I don't have this tablet anymore, my information are probably not updated. This is an amazing device, and I enjoyed every bit of it. It's still running strong with my younger brother.
I shall put a link to this thread in mine so that people can come here for most current information.

Great job on the new thread, looks great and should streamline the process of the noobs and experienced alike find what they need and point them in the right direction. Great tutorial. The reason Android will keep growing is because of people like ones that have been involved with the dev work on this tablet, and all the projects here on XDA..

I was just comparing my A10-70F running 6.0.1 with my mother's which is on stock 5.0.1 and found that my screen was distinctly dull and grey in comparison. After removing f.lux and checking all the display and battery settings were the same I was stumped.
That was until I discovered that the brightness slider setting does absolutely nothing on mine!
Does it work for everyone else?

@mr-br working fine here :good:

@mr-br People with non-working brightness sliders on this tablet usually have enabled auto-brightness somehow, which does not work, as the tablet doesn't have an ambient light sensor. If you disable auto-brightness (for which you might need an app, as there are no controls for it in the standard settings app), then the brightness slider should work again.

Yes tx I found this seems to be a generic issue with this tablet. Found the app via a thread on the lenovo forum.
"I just installed the App "Best Display Brightness Level" from "Top10Labs" out of the GPlay-Store, then start it and uncheck the "Auto Brightness" tick Smiley Happy After that, i can use the built in brightness slider, even after uninstall the app Smiley Happy"
My screen still has rather a blue cast though ...

Has anyone installed this ROM coming from (rooted) stock 5.0.1 yet?

gtallmadge said:
Has anyone installed this ROM coming from (rooted) stock 5.0.1 yet?
Click to expand...
Click to collapse
To which ROM do you refer??
If you mean the Stock then pretty much everyone I guess.
If you mean my custom stock then nobody has even bothered to report anything back at all.
I am pretty sure it would be just fine but until a few report back to it's OK I cant offer any Guarantees.
If your use to SPFlashTool then restoring the tablet would not be an issue anyway.

Yes, I do mean the stock Lenovo 5.0.1. Another question would be on your custom ROM 6.0, are there any issues for Tab2 A10-70F? As I have observed, you and others in Europe have the L version, which is not available to us in the US. Also, thank you for your hard work and guidance for the device, it is appreciated.

gtallmadge said:
Yes, I do mean the stock Lenovo 5.0.1. Another question would be on your custom ROM 6.0, are there any issues for Tab2 A10-70F? As I have observed, you and others in Europe have the L version, which is not available to us in the US. Also, thank you for your hard work and guidance for the device, it is appreciated.
Click to expand...
Click to collapse
Most of us and me included are on the "F" version I think..
It is just that the L firmware also works on our F versions.
Maybe I should make it clear that my ROM is the WiFi version only as I stripped some of the RIL parts out of the ROM

Good news! I look forward to flashing your ROM and getting 6.0 on my tablet. Thank you for your patience in addressing my concerns and questions.

gtallmadge said:
Good news! I look forward to flashing your ROM and getting 6.0 on my tablet. Thank you for your patience in addressing my concerns and questions.
Click to expand...
Click to collapse
No problem
Be sure to let us know how it all goes. :fingers-crossed:
PS: Is that the Fire Phone you have?? I have just bricked my second Fire Phone trying unlock that darn bootloader again. I maybe able to recover this one though as there are still some signs of life unlike the last one

[ROM][OFFICIAL] RevengeOS 4.1 for Ulefone Armor X5 [aka Bretzel]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
RevengeOS is an operating system based on Android Open Source Project, built with a unique look and performance in mind. It's daily usage ready, lightweight and elegant.​
FEATURES
RevengeOS exclusive features:
- Battery health checker
- Brand new RevengeUI, built to be different, built to be elegant
- Brand new media controller
- Systemwide gradients
- New lock screen clock styles
General features:
- In call haptic-feedback
- Kill app button
- Toggle battery percentage in status bar
- Resume media from Quick Settings
- Playback control from volume buttons
- Wake up with volume buttons
- Quick camera launch from sleep
- 3-button navigation system
- Pill navigation system
- Swipe to screenshot
- Wake on charge
- Proximity sensor check when waking up
- Systemwide sensor block
- And so much more!
DOWNLOADS
Ulefone Armor X5 Download RevengeOS 4.0
INSTALLATION
- Boot into your recovery
- Wipe system, data, dalvik-art cache, cache
- Flash RevengeOS build
- Optional: flash NikGapps
- Reboot
- Optional: flash Magisk (if you want to root your device as well) (it's recommended to flash Magisk post first boot)
- This ROM has been tested using Armor_X5_MH1_EEA_V02. Be sure of be at that fw when u flash RevengeOS 4.0, if u aren't at that fw flash it before flash Revenge
Important: Hi guys, I'm posting this message to talk about RevengeOS, yeah you already know that project so why I'm talking of it?
It's because I wanna talk about the developers of the project.
There are just 3 developers that hard worked everyday for you, with optimization, exclusive UI, volume panel, etc.
They want to make this project more and more exclusive, they want to improve everything.
And lastly, they want that their users be happy while using it.
But there is a problem, 3 developers can't do much.
So, I'm here to ask if you - if you're a developer, and if you want to join us, we have the following requirements:
- Knowledge on Android and Java
- Desire to innovate together the project
- Be mad
Email: [email protected]

Thanks for your contribution

New update!
Yesterday i launch an update with this changelog:
Code:
- Make ADB work better
- Disable blur (for better performance)
- May 2021 security patch
Enjoy Android 11 at your Ulefone Armor X5!!!!
Regards,
Jose

HI!
Would You be so kind to tell, if that operating system could work properly on my Armor 5_x _Q_EEA with MT6765 platform? MediaTek Helio P22 (MT6762). In other words, second revision of armor 5x, android 10.
I've got some strange problems with NFC. I received a device from China with NONEEA firmware. NFC didn't work, although there were no other problems. I switched to EEA official firmware . NFC did not work, although, again, I did not notice any other problems.
I don't no wat to do... I installed an app that reads NFC tags and read my own cards perfectly.
I updated Google services, I installed third-party payment applications. I can't pay.
I don't know what to try anymore ...
Has anyone come across this? Does NFC work on this OS?

Cheers, I have the newer Armor X5_SH1_V01
Chipset: MediaTek MT6763
Android 10/Kernal 4.9.190
is this compatible?

Belevax said:
HI!
Would You be so kind to tell, if that operating system could work properly on my Armor 5_x _Q_EEA with MT6765 platform? MediaTek Helio P22 (MT6762). In other words, second revision of armor 5x, android 10.
I've got some strange problems with NFC. I received a device from China with NONEEA firmware. NFC didn't work, although there were no other problems. I switched to EEA official firmware . NFC did not work, although, again, I did not notice any other problems.
I don't no wat to do... I installed an app that reads NFC tags and read my own cards perfectly.
I updated Google services, I installed third-party payment applications. I can't pay.
I don't know what to try anymore ...
Has anyone come across this? Does NFC work on this OS?
Click to expand...
Click to collapse
Hi
Sorry for don't answering i was busy.
No it won't work sadly since my builds were for MT6763 Variant P23.
Also NFC worked perfect at Ulefone Armor X5 2019 even at stock ROM, talk with ulefone.
Thanks
Regards
Jose

enigma313 said:
Cheers, I have the newer Armor X5_SH1_V01
Chipset: MediaTek MT6763
Android 10/Kernal 4.9.190
is this compatible?
Click to expand...
Click to collapse
Hi
I am not sure at all, probably ulefone have used another LCMs, another drivers etc and won't work
Give a try
Thanks,
Regards
Jose

jmpf_bmx said:
Hi
I am not sure at all, probably ulefone have used another LCMs, another drivers etc and won't work
Give a try
Thanks,
Regards
Jose
Click to expand...
Click to collapse
Cheers, thanks for the quick reply.
From reading through the complete forums for this phone (Armor X5_Q), I see that the internal specs are vastly different., yet all our phones are similar. What's advertised, may/may-not be true, and the reasons for many problems posted. To resolve download from the app store 'droid info' or similar app. I've read 3 different MT676* types.
For example. I just purchased the "2021 Armor X5 running Andriod 10 / Kernal 4.9.190 After running 'droid into' l learned it's running MT6762. However, the advertisement says MT6765, and within this forum I also read it was MT6763.
Simply put: Spec your phone with the proper app to reduce the possibilities of bricking it, then proceed..

enigma313 said:
Cheers, thanks for the quick reply.
From reading through the complete forums for this phone (Armor X5_Q), I see that the internal specs are vastly different., yet all our phones are similar. What's advertised, may/may-not be true, and the reasons for many problems posted. To resolve download from the app store 'droid info' or similar app. I've read 3 different MT676* types.
For example. I just purchased the "2021 Armor X5 running Andriod 10 / Kernal 4.9.190 After running 'droid into' l learned it's running MT6762. However, the advertisement says MT6765, and within this forum I also read it was MT6763.
Simply put: Spec your phone with the proper app to reduce the possibilities of bricking it, then proceed..
Click to expand...
Click to collapse
Hi,
Yeah Ulefone sell Armor X5 with differents CPUs and a new android version.
And yeah the best is look the CPU used by your device at any app or cmdline or buildprop
Thanks
Regards
Jose

jmpf_bmx said:
Hi,
Yeah Ulefone sell Armor X5 with differents CPUs and a new android version.
And yeah the best is look the CPU used by your device at any app or cmdline or buildprop
Thanks
Regards
Jose
Click to expand...
Click to collapse
Cheers,
I tried several TWRP versions and the last being 331. I fell asleep with the phone connected to my PC and now the battery is dead, in boot-loop. How can I keep the phone off? When I cut the phone off [volume down +power] it only stays off long enough to charge the phone to cut back on?
When it loads it says:
Orange State
Your phone is unlocked and cannot be trusted.
Your phone will reboot in 5 seconds
*Oddly: Holder down Vol up + power does nothing.Only Volume Up and Down + Power - gives me the selection of:
Select Boot Mode:
-Recovery
-Fastboot
-Normal
Recovery or Normal does nothing. Fastboot functions are limited because it says "battery is too low"
Any ideas???
**UPDATE**
1. If your phone is similar to mines this phone is actually the Armor X5 Pro
2. TWRP version 331 will put your phone into a bootloop.
3. NONE of the TWRP versions work, I tried them all.
4. If purchased from amazon, complain about the "false advertisement of the chipset" and the lack of the proper firmware from the seller to obtain a refund. Its what I said, and I was refunded.
5. DO NOT use TWRP (waste of time), only apply Magisk and utilize the modules as needed.

i have all the proper downloads matching chipsets made sure on proper fw but i can not seam to get past boot logo i must be missing something first i flashed proper fw using so tool then flashed twrp then flashed revenge os its giving me a headache any help would be appreciated

crumle60 said:
i have all the proper downloads matching chipsets made sure on proper fw but i can not seam to get past boot logo i must be missing something first i flashed proper fw using so tool then flashed twrp then flashed revenge os its giving me a headache any help would be appreciated
Click to expand...
Click to collapse
Hi crumle
Did you wiped vendor?
Also older RevengeOS version booted to you?
Thanks
Regards Jose

Also i will keep updating the ROM until S officially appear since I my Armor X5 died, but sources are stablish etc

jmpf_bmx said:
Also i will keep updating the ROM until S officially appear since I my Armor X5 died, but sources are stablish etc
Click to expand...
Click to collapse
Thanks for the reply sorry took me a min to get my phone back from my last attempt to flash a couple other things and no I don't believe I wiped vendor I'll try that again thank u for it help

For 'the utha' Armor x5:
Armor x5 Android 10_Q Mt6765 aka Mt6762 ROOT AT LAST!
This 'tutorial' is a quicky for those yet to figure this fone out. Well it took a bit time for sure, but this is how it went... No matter what recovery or magisk I tried, nothing worked, all ulefone images with twrp were 64mb in size, where-as...
forum.xda-developers.com
Includes a working twrp at last