Help me :crying:
I'm using candysix rom,i flash it using Philz recovery,i follow all the step,when it finally boot the rom,it freeze and stuck at lockscreen,i try to make a new clean flash,and its nothing,i flash another rom and it still candysix rom,i try to reflash official firmware using osin and it stuck at NAND write and fail,please help me ASAP
My model is P5100
irfanrahim said:
Help me :crying:
I'm using candysix rom,i flash it using Philz recovery,i follow all the step,when it finally boot the rom,it freeze and stuck at lockscreen,i try to make a new clean flash,and its nothing,i flash another rom and it still candysix rom,i try to reflash official firmware using osin and it stuck at NAND write and fail,please help me ASAP
My model is P5100
Click to expand...
Click to collapse
looks like the emmc issue. there are many who have faced such situations only thing suggested is changing/repairing the emmc.
@irfanrahim
Here is a link for the firmware repair of p5100
this zip file would contain csc, bootloader pda, modem and pit file.
Instructions should be same like here
see if this works and you are welcome to ask me if you have any questions. just Quote my post.
Related
Hi
This may be a repeated request. Just to wanted to get a confirm link which should have Tab2 GT-P3100 Stock Rom & Recovery and process to go back to stock.
Thanks.
Please refer here....
http://forum.xda-developers.com/showthread.php?p=38273172
If you need latest recovery from other locations pm me I will give ready link....
Hope I helped you...
adishakthi said:
Please refer here....
http://forum.xda-developers.com/showthread.php?p=38273172
If you need latest recovery from other locations pm me I will give ready link....
Hope I helped you...
Click to expand...
Click to collapse
I think this is what I needed. Just wanted to make sure I have everything when I brick my tablet and need to claim warranty. I hope the Baseband and Stock Recovery need ODIN installation and the installation steps for both are same.
I could not find out any tutorial here, how to use ODIN. If can somebody made one, bcoz there are peoples who wants to go back to stock ROM and this will help them.
Baseband
Version: P3100 DDCLK1
Android :4.1.1
Downliad link:
http://www.mediafire.com/?a8mv3tc8tx6xwkh
Stock recovery:
http://www.mediafire.com/download.php?bur55ysr1xl52vo
Firmware:
http://www.hotfile.com/dl/183584982/...1_INU.zip.html
BTW: I am presently with Adi's SungSonic HD Rom:good: and it is better than CM10.1 (My experience, no offense)
@ Adi
Can you please guide me step by step flashing Stock ROM using ODIN.
I googled and know little bit of ODIN flashing..Just need to select PDA and flash it once my phone detected by ODIN.
But I have 3 diff package here..
Recovery
Baseband
Firmware
How can I flash all of these by ODIN?
KSKHH said:
@ Adi
Can you please guide me step by step flashing Stock ROM using ODIN.
I googled and know little bit of ODIN flashing..Just need to select PDA and flash it once my phone detected by ODIN.
But I have 3 diff package here..
Recovery
Baseband
Firmware
How can I flash all of these by ODIN?
Click to expand...
Click to collapse
Firmware is an total package that contains all elements.......including bootloader. ...
Flash it via pc Odin pc Odin. ......
Before flashing whole firmware it is recommended to flash stock recovery and kernel via mobile Odin. ....
I have provided baseband and recover separately. ....
Because some people may need only baseband and they don't want to flash everything. .....
adishakthi said:
Firmware is an total package that contains all elements.......including bootloader. ...
Flash it via pc Odin pc Odin. ......
Before flashing whole firmware it is recommended to flash stock recovery and kernel via mobile Odin. ....
I have provided baseband and recover separately. ....
Because some people may need only baseband and they don't want to flash everything. .....
Click to expand...
Click to collapse
So if I download the Firmware then I will get stock recovery and Kernel as well...Am I right?
Can you please tell me file names for those?
So after flashing Stock Recovery & Kernel...I have to flash the firmware which will again flash Stock Recovery & Kernel..
Edit: I have flashed stock firmware.
i made a mistake (i think) with flashing a cutom rom and now splash screen (name of device) is messed up
if someone has a idea on how to fix it, please let me know...
Thanks
DutchGlory said:
i made a mistake (i think) with flashing a cutom rom and now splash screen (name of device) is messed up
if someone has a idea on how to fix it, please let me know...
Thanks
Click to expand...
Click to collapse
You are more likely going to get help if you post in detail your issue, what exact model note you have, what custom rom and recovery you installed, what version of odin your using.
Give as much detail as you can............
RE: Repair Splash screen GT-N8000
kkretch said:
You are more likely going to get help if you post in detail your issue, what exact model note you have, what custom rom and recovery you installed, what version of odin your using.
Give as much detail as you can............
Click to expand...
Click to collapse
Well i have the GT-N8000 an i used ODIN 3.0.7 flashing ClockWorkMod Recovery here:
forum.xda-developers - show thread 2102677
after that i flashed CyanoGenMod ROM 10.2 Nightly ("cm-10.2-20131221-NIGHTLY-n8000.zip") Here
download.cyanogenmod.org device GT-N8000
I tried to restore splash sreen by flashing a stock ROM N8000XXCMF1_N8000PHNCMG1_PHN again... didden't work...
so any other thoughts are welcome...
The initial Samsung splash is in the kernel .
Suggest in recovery format data system cache and sdcard .
Boot to download mode flash stock rom via odin .
JJEgan said:
The initial Samsung splash is in the kernel .
Suggest in recovery format data system cache and sdcard .
Boot to download mode flash stock rom via odin .
Click to expand...
Click to collapse
So i need to look for separate kernel file. a stock rom doesn't have a kernel, only basic system files...
DutchGlory said:
So i need to look for separate kernel file. a stock rom doesn't have a kernel, only basic system files...
Click to expand...
Click to collapse
If a stock rom has no kernel in your view i suggest you read the faqs and guides before flashing anything ever again .
Kernel - This is always supplied with a ROM. It is the beating heart of Android. The ROM cannot function without the kernel. Since all ROMs include a kernel, if you're using a custom Kernel then flash a ROM, you will need to reflash the kernel again.
DutchGlory said:
Well i have the GT-N8000 an i used ODIN 3.0.7 flashing ClockWorkMod Recovery here:
forum.xda-developers - show thread 2102677
after that i flashed CyanoGenMod ROM 10.2 Nightly ("cm-10.2-20131221-NIGHTLY-n8000.zip") Here
download.cyanogenmod.org device GT-N8000
I tried to restore splash sreen by flashing a stock ROM N8000XXCMF1_N8000PHNCMG1_PHN again... didden't work...
so any other thoughts are welcome...
Click to expand...
Click to collapse
Can you please tell us exactly how you flashed the stock ROM
kkretch said:
Can you please tell us exactly how you flashed the stock ROM
Click to expand...
Click to collapse
with ODIN i usually dont have any problems with flashing roms. Not where exactly the splash screen is installed...
but with a rooted rom things can go bad. Normally when you flash a rom the splash screen stays unaffected.
For some reason it was damaged. so i need to find a way to repair it... not easy ....
DutchGlory said:
with ODIN i usually dont have any problems with flashing roms. Not where exactly the splash screen is installed...
but with a rooted rom things can go bad. Normally when you flash a rom the splash screen stays unaffected.
For some reason it was damaged. so i need to find a way to repair it... not easy ....
Click to expand...
Click to collapse
When you tried to flash to factory firmware did odin give you a message of pass or fail?
When you flashed to factory ROM did it actually install the factory firmware?
Have you have tried other versions of odin.......a copy of Odin3 v1.85 in attachment, if you want to try it.
kkretch said:
When you tried to flash to factory firmware did odin give you a message of pass or fail?
When you flashed to factory ROM did it actually install the factory firmware?
Have you have tried other versions of odin.......a copy of Odin3 v1.85 in attachment, if you want to try it.
Click to expand...
Click to collapse
i never had a problem with 3.0.7 i even tried "mobile ODIN"
DutchGlory said:
i never had a problem with 3.0.7 i even tried "mobile ODIN"
Click to expand...
Click to collapse
What actually happens when you say the spash screen is messed up?
Does the tablet actually start? Have you tried flashing another custom touch wiz based firmware like Revolution HD or even Omni rom?
I followed nearly all the steps in installing cm10.1 build 20130322 but the gapps file was corrupted and i couldn't flash it
so i just went ahead and rebooted the system and guess what?
white screen!
so i went to restore boot from advanced restore and guess what again?
bootloop!
I have just decided to give up on installing custom roms and if the mods wanna delete this thread
No problem!
Bhuyan23 said:
I followed nearly all the steps in installing cm10.1 build 20130322 but the gapps file was corrupted and i couldn't flash it
so i just went ahead and rebooted the system and guess what?
white screen!
so i went to restore boot from advanced restore and guess what again?
bootloop!
I have just decided to give up on installing custom roms and if the mods wanna delete this thread
No problem!
Click to expand...
Click to collapse
You should not use restore boot method in CM ROMs. You may also brick device if you do it, better use some GB ROM if you are getting white screen issue.
Bhuyan23 said:
I followed nearly all the steps in installing cm10.1 build 20130322 but the gapps file was corrupted and i couldn't flash it
so i just went ahead and rebooted the system and guess what?
white screen!
so i went to restore boot from advanced restore and guess what again?
bootloop!
I have just decided to give up on installing custom roms and if the mods wanna delete this thread
No problem!
Click to expand...
Click to collapse
flash an english baseband then flash cm
flash the first rom through odin
and there you go, unbrick
ShadowsDie said:
flash an english baseband then flash cm
flash the first rom through odin
and there you go, unbrick
Click to expand...
Click to collapse
can anybody just explain to me what causes this white screen
Bhuyan23 said:
can anybody just explain to me what causes this white screen
Click to expand...
Click to collapse
Because the GB ROM you had earlier is from a country that has something changed,(i don't know what) it causes problems when you flash any CM
The solution is flashing an English rom there will be no such change and it will work
Do you understand now?
P.S. Such a ROM with this problem are used to be from india firmwares
Do you have an indian firmware?
ShadowsDie said:
Because the GB ROM you had earlier is from a country that has something changed,(i don't know what) it causes problems when you flash any CM
The solution is flashing an English rom there will be no such change and it will work
Do you understand now?
P.S. Such a ROM with this problem are used to be from india firmwares
Do you have an indian firmware?
Click to expand...
Click to collapse
Absolutely! I do have an Indian firmware
by the way I thought it had something to do with the model variant
but when I checked the back of the battery I found this
Can you please provide the sales code for an english rom? for example XEU
Bhuyan23 said:
Absolutely! I do have an Indian firmware
by the way I thought it had something to do with the model variant
but when I checked the back of the battery I found this
Click to expand...
Click to collapse
One suggestion don't provide such kind of pics because it has your IMEI number,
So for privacy issue you have to protect that number.
Bhuyan23 said:
Can you please provide the sales code for an english rom? for example XEU
Click to expand...
Click to collapse
For indian firmware issue then I'm not agree that, its issue by indian firmware.
I always flash custom roms on indian firmware & till now i didn't face any issue like white screen or brick device.
-Lets do this step by step.
Do you have indian firmware ?
(Latest firmware DDMF2 or try any old one)
Flash back it through odin
-Then download CWM v5.5
(You get link from my rom Pure Galaxy v1.0 thread in development section, check last page)
Check the version again
CWM v5.5 not v6 or v5.0
-root your device through CWM
-& now finally go n try to flash cm rom, I hope this time you will never face any white screen issue.
j.posarekar70 said:
One suggestion don't provide such kind of pics because it has your IMEI number,
So for privacy issue you have to protect that number.
For indian firmware issue then I'm not agree that, its issue by indian firmware.
I always flash custom roms on indian firmware & till now i didn't face any issue like white screen or brick device.
-Lets do this step by step.
Do you have indian firmware ?
(Latest firmware DDMF2 or try any old one)
Flash back it through odin
-Then download CWM v5.5
(You get link from my rom Pure Galaxy v1.0 thread in development section, check last page)
Check the version again
CWM v5.5 not v6 or v5.0
-root your device through CWM
-& now finally go n try to flash cm rom, I hope this time you will never face any white screen issue.
Click to expand...
Click to collapse
I just know that people here solved this bug flashing an english ROM.
But maybe you are right, he should try.
Welcome to the Index page of Xolo Q900. Here the record of everything related
to Q900 can be found.
Index
About Xolo Q900
Installing ClockWorkMod
Stock ROM
Custom ROM based on stock ROM(More stable and faster)
MIUI
News
Tips and Tricks(coming soon!)
can you please again post the stock rom for flashing the rom through flashtool i really need the rom to flash my mobile bak to stock rom please
Stock ROM links(updated)
Android Version: 4.2.2
Stock ROM in .img format(For flashing via SP Flash tool)
click here or here
Stock ROM in .zip format(For Stock recovery flashing)
click here
Thanks for notifying!!! Please do tell me if something goes wrong, I am here to help you
stock rom installation error
irfanjunaid said:
Android Version: 4.2.2
Stock ROM in .img format(For flashing via SP Flash tool)
click here or here
Stock ROM in .zip format(For Stock recovery flashing)
click here
Thanks for notifying!!! Please do tell me if something goes wrong, I am here to help you
Click to expand...
Click to collapse
Hi, I have installed Your MIUI custom rom for my q900 and then moved to another custom rom i.e. samsung note 3 rom. But the samsung note 3 rom have some serious bug so I wanted to go back to my old stock rom.
But whenever I tried to install the stock rom [downloaded from : http://forum.xda-developers.com/android/general/xolo-q900-official-stock-rom-t2809199] I got an error message showing "signature verification failure. installation aborted".
For installing those custom rom I have installed the CWM recovery and used that recovery to install the stock rom.
Really have no idea whats going wrong.
Any help will be appreciated.
soumyaxoloq900 said:
Hi, I have installed Your MIUI custom rom for my q900 and then moved to another custom rom i.e. samsung note 3 rom. But the samsung note 3 rom have some serious bug so I wanted to go back to my old stock rom.
But whenever I tried to install the stock rom [downloaded from : http://forum.xda-developers.com/android/general/xolo-q900-official-stock-rom-t2809199] I got an error message showing "signature verification failure. installation aborted".
For installing those custom rom I have installed the CWM recovery and used that recovery to install the stock rom.
Really have no idea whats going wrong.
Any help will be appreciated.
Click to expand...
Click to collapse
Yes, i can remember myself committing the same mistake! Nothing, just delete a file named checksum.exe... Then try again! Please report back if you still have problems!
irfanjunaid said:
Yes, i can remember myself committing the same mistake! Nothing, just delete a file named checksum.exe... Then try again! Please report back if you still have problems!
Click to expand...
Click to collapse
Sorry for very late reply.
Where Am I suppose to find that file [checksum.exe]?
Is it in the phone [havent searched yet] or is it in the Update package [searched but not found]
Thanks
Soumya
I got checksum_gen.exe....i then deleted that file....but no progress....can u please describe in detail cause i am also having d same problem
Darkwell_Habridge said:
I got checksum_gen.exe....i then deleted that file....but no progress....can u please describe in detail cause i am also having d same problem
Click to expand...
Click to collapse
Try deleting checksum.exe, checksum generator, checksum.ini files.
I am using sp tool to flash d stock firmware.....i tried deleting cheksum-gen.exe checksum.ini ...n when i tried to download d stock firmware thru sp tool, it shows searching(in d usb portion of sp tool)...n then it gets stuck there....
Darkwell_Habridge said:
I am using sp tool to flash d stock firmware.....i tried deleting cheksum-gen.exe checksum.ini ...n when i tried to download d stock firmware thru sp tool, it shows searching(in d usb portion of sp tool)...n then it gets stuck there....
Click to expand...
Click to collapse
OMG! This problem is not related to checksum. Alright, the problem is due to the absence of driver. You need to install MT6589 preloader drivers inorder to flash roms to MT6589 device. In windows 8, you need to disable driver signature check(google it) to install the driver. Good luck.
Ok thats it...flashed d stock rom successfully...n d process wz perfect...n learned some new things. 2..thank u for d help..
Darkwell_Habridge said:
Ok thats it...flashed d stock rom successfully...n d process wz perfect...n learned some new things. 2..thank u for d help..
Click to expand...
Click to collapse
You are welcome, please don't forget to press thanks!
This is my first tutorial so please tell me if I missed anything This thread will teach some noobs here who are on stock 4.1.2/4.2.2 and want to flash latest roms like cm12/cm11/Euphoria Os and etc. This tutorial is self-tested by me!
______________________________________________________________________________
1) Firstly, you should unlock the bootloader. To do this go to this thread> http://forum.xda-developers.com/xperia-l/general/tutorial-bootloader-unlocking-relocking-t2332900 (after flashing you may get a bootloop so flash stock ftf to recover > http://forum.xda-developers.com/xperia-l/general/xperia-l-how-to-flash-tool-unlocking-t2337955 http://forum.xda-developers.com/xperia-l/general/sony-xperia-l-flashable-ftfs-locked-t2560642
2)You should install a recovery > http://forum.xda-developers.com/xperia-l/orig-development/cwm-recovery-installer-t2589320 for this you need root > http://forum.xda-developers.com/xperia-l/general/rootkit-xperia-l-15-3-1-17-1-click-root-t2591290 Backup your stock rom(optional) and TA(if the phone gets damaged during warranty) and copy rom zip file to sd card http://forum.xda-developers.com/xperia-l/orig-development/4-4-3-aospa-legacy-4-4-beta1-t2571273
3) In recovery Wipe cache/dalvic/art cache> Factory data reset> clean to install a new rom
4) Flash the rom and Gapps for specific rom(may not be included so google (the version of android gapps) and flash it after rom. Edit: Flashing kk is not necessary.
5) Reboot and wait for some time... Instalation takes some time... :good:
___________________________________________________________________________
6)(BONUS) If you want a good recovery like philz/twrp > http://forum.xda-developers.com/xperia-l/themes-apps/beta-fota-cwm-one-klick-t3068084 just install an app and click install philz. The app that installs a recovery is unique. It won't be overriden by another rom's recovery and u won't have to flash tz boot.img again and again... Thumbs up if you liked my tutorial :good: I do appreciate it! And of course, if you need any help just comment here or add me on facebook.
I'm here to help you guys!
Edit: There are so many good roms for our XL on xda( I don't compare hard work of devs). Here are some ones that I tried and suggest checking out:
Euphoria OS: http://forum.xda-developers.com/xperia-l/orig-development/rom-euphoria-os-1-0-t3069503
Ressurection remix: http://forum.xda-developers.com/xpe...m-resurrection-remix-lollipop-v5-3-0-t3008255
Glade rom: http://forum.xda-developers.com/xperia-l/orig-development/rom-glade-rom-t3060544
And one for KK: http://forum.xda-developers.com/xperia-l/orig-development/4-4-3-aospa-legacy-4-4-beta1-t2571273 check out my video on youtube!
My video reviews on YouTubeGlade Rom https://www.youtube.com/watch?v=a3k8wF_2pAA
Flex OS: https://www.youtube.com/watch?v=yGmrg6wpdrA
What's on My android(cm12) >> https://www.youtube.com/watch?v=wxJCoAzq56Y
Ressurection Remix Rom: > https://m.youtube.com/watch?v=X8D_lY2xVfU
Blisspop: https://www.youtube.com/watch?v=ubY1hxQdJoA
My Channel: https://www.youtube.com/channel/UC9wT3_zp21yFjIm0hi2S-kw
Happy flashing!
edit: did i say something?
Sent from my C2105 using XDA Free mobile app
You should add backup of TA before unlocking bootloader (in case if phone will got damaged.. during warranty). Else your tutorial is great
Kosa02 said:
You should add backup of TA before unlocking bootloader (in case if phone will got damaged.. during warranty). Else your tutorial is great
Click to expand...
Click to collapse
Copy that! Adding right now!
Iasashvili said:
This is my first tutorial so please tell me if I miss anything This thread will teach some noobs here who are on stock 4.1.2/4.2.2 and want to flash latest roms like cm12/cm11/Euphoria Os and etc. THIS tutorial is self-tested by me!
1) Firstly, you should unlock the bootloader. To do this go to this thread> http://forum.xda-developers.com/xperia-l/general/tutorial-bootloader-unlocking-relocking-t2332900 (after flashing you may get a bootloop so flash stock ftf to recover > http://forum.xda-developers.com/xperia-l/general/xperia-l-how-to-flash-tool-unlocking-t2337955 http://forum.xda-developers.com/xperia-l/general/sony-xperia-l-flashable-ftfs-locked-t2560642
2)You should install a recovery > http://forum.xda-developers.com/xperia-l/orig-development/cwm-recovery-installer-t2589320 for this you need root > http://forum.xda-developers.com/xperia-l/orig-development/rom-pac-t27490553) Backup your stock rom(optional) and TA(if the phone gets damaged during warranty) and copy rom zip file to sd card( KK rom is recommended first)http://forum.xda-developers.com/xperia-l/orig-development/4-4-3-aospa-legacy-4-4-beta1-t2571273
4) Wipe cache/dalvic/art cache> Factory data reset> clean to install a new rom
5) Flash the rom. And GApps for specific rom(may not be included so google (the version of android gapps) and flash it after rom
6) reboot and wait for some time... Instalation takes some time... :good:
7) If you want a good recovery like philz/twrp > http://forum.xda-developers.com/xperia-l/themes-apps/beta-fota-cwm-one-klick-t3068084 just install an app and click install philz. The app that installs a recovery is unique. It won't be overriden by another rom's recovery and u won't have to flash tz boot.img again and again... Thumbs up if you liked my tutorial :good: I do appreciate it!
Click to expand...
Click to collapse
hello, i want to try the step 7.. if after i unlock bootloader then i just intall philz apk?
Yes
tbooz14 said:
hello, i want to try the step 7.. if after i unlock bootloader then i just intall philz apk?
Click to expand...
Click to collapse
Install the app and click philz if your bootloader is unlocked. BTW it's written in that thread that can only be installed on cm12/cm11 etc. But not on stock. If you want a recovery on stock rom try the step 2)
you should wipe cache and dalvik after flashing
and one question why is KK recommended first?
No need to wipe cache/dalvic
Flashing_Expert said:
you should wipe cache and dalvik after flashing
and one question why is KK recommended first?
Click to expand...
Click to collapse
Lol, flashing kk is recommeded because I did that myself. The thread says that It's self-tested by me well, I flashed cm11 and than cm12
Iasashvili said:
Lol, flashing kk is recommeded because I did that myself. The thread says that It's self-tested by me well, I flashed cm11 and than cm12
Click to expand...
Click to collapse
cm11 isnt nessasary...
cm11 overrides system and userdata partition...
cm12 does the same... so there isnt any differenz in flashing cm12 from stock or from cm11....
only thing usefull is to flash latest stock before flashing cm12 ... because other than custom roms ...stock rom will override nearly all partitions.... that means better modem...baseband ...etc... so you should come from last stock
Sent from my C2105 using XDA Free mobile app
Thanks
SdtBarbarossa said:
cm11 isnt nessasary...
cm11 overrides system and userdata partition...
cm12 does the same... so there isnt any differenz in flashing cm12 from stock or from cm11....
only thing usefull is to flash latest stock before flashing cm12 ... because other than custom roms ...stock rom will override nearly all partitions.... that means better modem...baseband ...etc... so you should come from last stock
Sent from my C2105 using XDA Free mobile app
Click to expand...
Click to collapse
Deleted my nonsense!
Iasashvili said:
Lol, flashing kk is recommeded because I did that myself. The thread says that It's self-tested by me well, I flashed cm11 and than cm12
Click to expand...
Click to collapse
well this is how many myths about flashing stuff born...
Iasashvili said:
Lol, flashing kk is recommeded because I did that myself. The thread says that It's self-tested by me well, I flashed cm11 and than cm12
Click to expand...
Click to collapse
hello me again.. have some question again.. hehe if i want to flash RR rom by david then i have to flash first the cm11? then cm 12?
or skip flashing cm 11 or cm 12 and go ahead on RR by david
also i tried to back up TA but its fail need rooting acces..
The tutorial for installing recovery is for locked bootloader will it work for unlocked?
Sent from my C2105 using XDA Free mobile app
clean install directly
tbooz14 said:
hello me again.. have some question again.. hehe if i want to flash RR rom by david then i have to flash first the cm11? then cm 12?
or skip flashing cm 11 or cm 12 and go ahead on RR by david
also i tried to back up TA but its fail need rooting acces..
Click to expand...
Click to collapse
No need to flash cm11/cm12 as it was sad...
yes, it will work for UBL too
grenademik said:
The tutorial for installing recovery is for locked bootloader will it work for unlocked?
Sent from my C2105 using XDA Free mobile app
Click to expand...
Click to collapse
But in my experience, the recovery was a little buggy and after some time was gone Not sure why. Used it just once to flash cm12
Yeah, sorry about that...
Flashing_Expert said:
well this is how many myths about flashing stuff born...
Click to expand...
Click to collapse
I was just sharing my own experience. Thanks for notice. I just edited it
now you update this.. all is clear now no more question thanks.. ill recommend this thread of your to others newbie
you are always the best guys.......thank you:good::good::good::good:
I have a HUGE problem. Please help me ASAP!
I just flashed my Xperia L to CM 12.1. I was already on CM 12 before. So I went into recovery, wiped everything and installed the new ROM from zip. Everything worked fine except for the network signal. I was getting no network signal at all. So, when I rebooted the phone, I saw that the ThunderZap kernel was also removed. I tried to flash the kernel using flashtool, but this particular variant has 2 .img files (bootlp and bootkk). I flashed them both using the FlashtTool. Now, when I reboot my phone, all I see is the ThunderZap logo. Please help me ASAP, as this is my only primary driver phone.
I rooted the phone using the install.bat toolkit. unlocked the bootloader using flashtool and imei on sony. flashed stock rom. then installed recovery and flashed a custom rom.
The wifi stopped working. cant even turn it on. (the date keeps reseting to 1970 on every flash btw)
Tried miui rom, cm12, stryfex roms. same issue..
I tried:
Installing a different version of flashtool
Changing wlan.ko(can't find a prima folder)
Installing a different kernel
Flashtool says error flash aborted on flashing stock ftf
(Closing TA partition
09/004/2015 19:04:30 - INFO - Parsing boot delivery
09/004/2015 19:04:30 - INFO - Ending flash session
09/004/2015 19:04:30 - ERROR -
09/004/2015 19:04:30 - ERROR - Error flashing. Aborted
09/004/2015 19:04:30 - INFO - Device connected in flash mo)
please tell me how to get wifi to work on cm12 or flash a stock ftf