Database Info

If you have an NXT-L29 or NXT-L09, please test!

Could anyone please help me out? I have a bricked device and am looking into how to unbrick it.
I'm particularly interested if the English version of HiSuite which says it supports the L09 and L29 actually does.
Could anyone with an L29 or an L09 please put their device in fastboot and try the system recovery from hisuite:
http://consumer.huawei.com/minisite/HiSuite_en/
A new version which supposedly supports the phones was released.
Could anyone confirm if this works?

cmon guys, help out this man, so that he can continue to help us with new firmware updates
Sent from my Huawei Mate 8 NXT-AL10 using Tapatalk

I did it with a L29 device. The app says Device is in recovery mode, and once I clicked next, It says your device is not supported for system recovery. Please take your device to a nearby huawei service center.

If your device is unlocked reflash through fastboot
Sent from my HUAWEI NXT-L29 using Tapatalk

M.Noury said:
If your device is unlocked reflash through fastboot
Sent from my HUAWEI NXT-L29 using Tapatalk
Click to expand...
Click to collapse
I wish that I could do that, but there are partitions that I can't flash with fastboot, which I did flash using other means when reverse engineering the updates. Those are the partitions which are broken and don't allow my phone to boot, or show anything on the screen for that matter.
There is a restore mechanism built into Huawei's fastboot to get into a separate restore mode, but I think there is a special recovery image needed which the Huawei Hisuite app can access. I just don't know how to find it when all the devices come back as unsupported, despite being shown as supported in the documentation. It's very strange.

This is something that Sony had done with two hidden partitions FOTA and TA . This makes the device unbrickable and also.Have the OEM ways to keep the boot locked with hidden features.
Hisuite latest Windows app has these features to restore and when I tried,it scanned my.phone and found.My.phone to be working fine.
1) start the hisuite App on pc
2) connect to the phone in fastboot mode
3) restore
4) the app scans and looks for the partitions and then restores the bricked phone ONLY
---------- Post added at 12:58 PM ---------- Previous post was at 12:55 PM ----------
Sorry to make this as another post
After downloading from that site the app is old edition.
After installing, check updates and you get latest hisuite app with material design with more features.
If anyone wants, I can upload the app which is 30+mb

bluheart said:
This is something that Sony had done with two hidden partitions FOTA and TA . This makes the device unbrickable and also.Have the OEM ways to keep the boot locked with hidden features.
Hisuite latest Windows app has these features to restore and when I tried,it scanned my.phone and found.My.phone to be working fine.
1) start the hisuite App on pc
2) connect to the phone in fastboot mode
3) restore
4) the app scans and looks for the partitions and then restores the bricked phone ONLY
---------- Post added at 12:58 PM ---------- Previous post was at 12:55 PM ----------
Sorry to make this as another post
After downloading from that site the app is old edition.
After installing, check updates and you get latest hisuite app with material design with more features.
If anyone wants, I can upload the app which is 30+mb
Click to expand...
Click to collapse
Duraaraa I was wondering if the suggestion from Bluheart resolved your issues
---------- Post added at 06:59 PM ---------- Previous post was at 06:58 PM ----------
Duraaraa I was wondering if the suggestion from Bluheart resolved your issues

duraaraa said:
Could anyone please help me out? I have a bricked device and am looking into how to unbrick it.
I'm particularly interested if the English version of HiSuite which says it supports the L09 and L29 actually does.
Could anyone with an L29 or an L09 please put their device in fastboot and try the system recovery from hisuite:
http://consumer.huawei.com/minisite/HiSuite_en/
A new version which supposedly supports the phones was released.
Could anyone confirm if this works?
Click to expand...
Click to collapse
Hi, I have a mate 8 NXT-L09 with C212B120 firmware, I tried the procedure you describe because I unlocked the bootloader, installed TWRP and rooted only to discover I did not like the out come, I lost some functionality of the huawei themes app and now I like to go back to its original out of the box state, to make long story short (not really), the huawei tool says it doesnt recognize the device and that I should take it to them for repairs, I tried this while i had TWRP and also while I had stock recovery on the device.
I wonder if it doesnt recognize the device because its rooted or with an unlocked bootloader?, im tempted to unroot and relock the bootloader and see if that will do the trick?, if i try this ill let you know what goes.
Cheers.

rom stock l09c212b120
danywalkert said:
Hi, I have a mate 8 NXT-L09 with C212B120 firmware, I tried the procedure you describe because I unlocked the bootloader, installed TWRP and rooted only to discover I did not like the out come, I lost some functionality of the huawei themes app and now I like to go back to its original out of the box state, to make long story short (not really), the huawei tool says it doesnt recognize the device and that I should take it to them for repairs, I tried this while i had TWRP and also while I had stock recovery on the device.
I wonder if it doesnt recognize the device because its rooted or with an unlocked bootloader?, im tempted to unroot and relock the bootloader and see if that will do the trick?, if i try this ill let you know what goes.
Cheers.
Click to expand...
Click to collapse
bunas danywalkert mira tengo un mate 8 de iusacel de fabrica venia con nxt-l09c212b120 y lo actulice a ala vercion b170 peor no hice un back up =( ahora tengo la vercion nxt-l0900b170 y tengo algunos errores como el de temas y otros mee gustaria saber si puedo regresar ami rom original y como le puedo hacer ? me podrias pasar tu backup o donde podria conseguir la rom original espero me puedas ayudar de ante mano muchas gracias.

Sorry amigo, only english is allowed in this forum.
alangastic said:
bunas danywalkert mira tengo un mate 8 de iusacel de fabrica venia con nxt-l09c212b120 y lo actulice a ala vercion b170 peor no hice un back up =( ahora tengo la vercion nxt-l0900b170 y tengo algunos errores como el de temas y otros mee gustaria saber si puedo regresar ami rom original y como le puedo hacer ? me podrias pasar tu backup o donde podria conseguir la rom original espero me puedas ayudar de ante mano muchas gracias.
Click to expand...
Click to collapse
Hi there, sorry for taking this long, didnt realize I had a message on this thread, hopefuly you already fixed your situation, if not, let me know, for sure I can help.
Saludos.

[Firmware][G935U][Jan 7.0]

Samsung Galaxy S7 Edge Latest UFirm G935UUES4BRA1​
Extract and flash with Odin
Download

amigo esa rom es libre, soy de mexico y me regalaron el s7 edge sm-g935u y lo quiero dejar libre.

POCHOTICO said:
amigo esa rom es libre, soy de mexico y me regalaron el s7 edge sm-g935u y lo quiero dejar libre.
Click to expand...
Click to collapse
Installing a firmware is not gonna unlock your device, you need to ask your carrier for unlock services or pay a 3rd party to unlock it.
Español: Instalar un firmware no va a desbloquear tu dispositivo, tienes que preguntarle a tu proveedor para desbloquearlo o pagar a alguien para que lo haga

brother you ARE great , thankyou so much for making my s7 edge g935u alive !
---------- Post added at 07:46 AM ---------- Previous post was at 07:39 AM ----------
my bad i wasn't choosing the right file , it worked now i'm on official oreo

maniphotoworkz said:
brother you ARE great , thankyou so much for making my s7 edge g935u alive !
---------- Post added at 07:46 AM ---------- Previous post was at 07:39 AM ----------
it boots after every 3 min. why ????
Click to expand...
Click to collapse
Do you have eng boot flashed?

Craz Basics said:
Samsung Galaxy S7 Edge Latest UFirm G935UUES4BRA1​
Extract and flash with Odin
Download
Click to expand...
Click to collapse
Will this address the unresponsive backlight touch keys issue? I'm currently running on the CRJ2 build.

[email protected] said:
Will this address the unresponsive backlight touch keys issue? I'm currently running on the CRJ2 build.
Click to expand...
Click to collapse
Note the date of the post, February 6th. It's an old firmware however I would imagine this would fix your issue, I would just recommend getting a newer firmware. Alternatively you could flash this and then take all the OTAs.
See the 5th character from the right of the model number, "4". Make sure that's what your current firmware has, as you cannot go backwards (i.e from. 5 to 4)

Craz Basics said:
Note the date of the post, February 6th. It's an old firmware however I would imagine this would fix your issue, I would just recommend getting a newer firmware. Alternatively you could flash this and then take all the OTAs.
See the 5th character from the right of the model number, "4". Make sure that's what your current firmware has, as you cannot go backwards (i.e from. 5 to 4)
Click to expand...
Click to collapse
Yeah...this one has 8, so, this is useless for me. I did, however, find an app that disables the backlight and restores responsiveness to the capacitive keys (Galaxy Button Lights 2). That feature was removed (or hidden) in 8.0 under display settings.
Not sure why they did that.?

[email protected] said:
Yeah...this one has 8, so, this is useless for me. I did, however, find an app that disables the backlight and restores responsiveness to the capacitive keys (Galaxy Button Lights 2). That feature was removed (or hidden) in 8.0 under display settings.
Not sure why they did that.?
Click to expand...
Click to collapse
Holy cow, 8!! I haven't messed with an s7 in awhile now but I didn't think its been that long. And glad you figured it out.

Sw rev. Check fail. Device: 6, binary 5

Hola resulta que tengo un dispositivo samsung galaxy s6 flat de la compañia T-Mobile a este telefono lo deje en un local de reparación de teléfono para que liberen la banda y así utilizarla con cualquier SIM.
Liberaron el telefono y todo andaba muy bien, pero a eso de un mes me encontraba pasandome via USB unos archivos para un proyecto de mi universidad pesaban esos archivos como 5gb por lo que lo deje conectado y mientras conversaba, entonces vi que me salio una notificación de que se ah retirado la SIM y me apararecia el boton de reiniciar y pues espere que se pasen todos los archivo y lo reinicie, y no me detectaba la SIM por lo que ahora voy a intentar flashear mi teléfono con ODIN pero me sale Sw rev. Check fail. Device: 6, binary 5 y no se que significa ese error. alguien que me ayude porfavor

Descarga el Firmware mas nuevo para tu modelo desde sammobile, la version que intentas flashear (5) es anterior al Bootloader que tiene tu telefono (6) por eso no te lo permite.

Hello! I have exactly the same problem, I get the following error when trying to flash fw.
"Sw rev. Check fail. Device: 6, binary 5".
Did you solve it? If yes, can you post the link to the firmware?
Thanks in advance.
Vincenzo.

You can't downgrade from bit6. Flash any version of firmware 7.0 bit 6 (like g920fxxu6...)

i have the sam problem ..can any one post tutorial how to fix Sw rev. Check fail. Device: 6, binary 5 pleaseeeee

virtualfish said:
Hello! I have exactly the same problem, I get the following error when trying to flash fw.
"Sw rev. Check fail. Device: 6, binary 5".
Did you solve it? If yes, can you post the link to the firmware?
Thanks in advance.
Vincenzo.
Click to expand...
Click to collapse
did you find any solution
---------- Post added at 07:15 AM ---------- Previous post was at 07:11 AM ----------
archyshabo said:
i have the sam problem ..can any one post tutorial how to fix Sw rev. Check fail. Device: 6, binary 5 pleaseeeee
Click to expand...
Click to collapse
did u fix it

kaddonat said:
did you find any solution
---------- Post added at 07:15 AM ---------- Previous post was at 07:11 AM ----------
did u fix it
Click to expand...
Click to collapse
so uhm, basically i solved, or at least i hope, downloading a firmwware that in the name include a v6. practically my phone flashed correctly, but even now i have the same problem as before, phone stuck in bootloop, and no recovery. Only download, but it seems without any meaning at this point (for me at least)

t6yr said:
so uhm, basically i solved, or at least i hope, downloading a firmwware that in the name include a v6. practically my phone flashed correctly, but even now i have the same problem as before, phone stuck in bootloop, and no recovery. Only download, but it seems without any meaning at this point (for me at least)
Click to expand...
Click to collapse
Hey, did you go any further? I'm stuck with this problem, and my device binary is 6 even though the latest firmware for my country is 5.

Davibarreto said:
Hey, did you go any further? I'm stuck with this problem, and my device binary is 6 even though the latest firmware for my country is 5.
Click to expand...
Click to collapse
unfortunately i haven't find a working method; BUT a way i found that can solve the problem is to wait until some dev. come out with some progress. Non the less the knoxx it's a safety feature implemented to prevent data leaking (i think this is the purpose), and to prevent it the must had put on it some work on it to prevent whoever might be to modify the phone data/software.
ps. just today watching a yt video guess what was the ad about. Samsung security knoxx :crying:
---------- Post added at 04:45 AM ---------- Previous post was at 04:41 AM ----------
Davibarreto said:
Hey, did you go any further? I'm stuck with this problem, and my device binary is 6 even though the latest firmware for my country is 5.
Click to expand...
Click to collapse
anyway since your device is still in rev 5 it's possible some work. You must find a rev 5 "problem solver" firmware. I've encountered some searching for a rev 6, but it cannot be downgraded so im stuck, maybe it can be your lucky day:good:

kaddonat said:
did you find any solution
---------- Post added at 07:15 AM ---------- Previous post was at 07:11 AM ----------
did u fix it
Click to expand...
Click to collapse
the issue in this thread is that the OP is trying to flash a revision 5 bootloader firmware set on a phone that has already had the revision 6 version installed. you cannot go backwards in bootloader versions. go to sammobile.com/firmware and get the a firmware set with the same or higher bootloader version and you should be fine
Davibarreto said:
Hey, did you go any further? I'm stuck with this problem, and my device binary is 6 even though the latest firmware for my country is 5.
Click to expand...
Click to collapse
did you ever manually flash firmware with Odin on your phone? Did you buy it new?
t6yr said:
unfortunately i haven't find a working method; BUT a way i found that can solve the problem is to wait until some dev. come out with some progress. Non the less the knoxx it's a safety feature implemented to prevent data leaking (i think this is the purpose), and to prevent it the must had put on it some work on it to prevent whoever might be to modify the phone data/software.
ps. just today watching a yt video guess what was the ad about. Samsung security knoxx :crying:
---------- Post added at 04:45 AM ---------- Previous post was at 04:41 AM ----------
anyway since your device is still in rev 5 it's possible some work. You must find a rev 5 "problem solver" firmware. I've encountered some searching for a rev 6, but it cannot be downgraded so im stuck, maybe it can be your lucky day:good:
Click to expand...
Click to collapse
the term youre looking for is "engineering bootloader", not trying to split hairs, just throw the correct term out there for yall

hi i have that issue but on my s8+
i made an attempt at rooting it and is stuck on only official binaries are allowed to be flashed
i have tried to download the firmware and flash it but it fails everytime i have tried.
any ideas

How to find bootloader ver.
How do I find the bootloader version and know which version needed from phone to sammobil? Same problem Dev:6 Bin:5 no bootloader,twrp. Just Odin download mode.
Product name SM-G925T
Current Binary: Samsung Official
System Status: Custom
FRP Lock: OFF
Secure Download: Enabled
Knox Warranty Void: 1 (0x030c)
RP or AP SWREV is B:6 K:3 S:4
Sw Rev. Check fail Device: 6 Binary 5
QUOTE=Youdoofus;80548785]the issue in this thread is that the OP is trying to flash a revision 5 bootloader firmware set on a phone that has already had the revision 6 version installed. you cannot go backwards in bootloader versions. go to sammobile.com/firmware and get the a firmware set with the same or higher bootloader version and you should be fine
did you ever manually flash firmware with Odin on your phone? Did you buy it new?
the term youre looking for is "engineering bootloader", not trying to split hairs, just throw the correct term out there for yall[/QUOTE]

Samsung Galaxy J4 SM-J400M

Hello.
Hey someone knows anything about the version "J4" without the "+" i have one, the Samsung Galaxy J4 Model: SM-J400M i'm trying to unlock the bootloader using this instructions but i do the thing but nothing happend. Also i tried changing the date, resetting the phone or enabling and disabling the knox feature etc etc... but the OEM line does not appears in developer options.
Specs info: CPU-Z
help?

Also the phone it tends a lot of random unexpectedly shutting down, especially playing games... :crying:

kapmino269 said:
Also J4+
Does your phone support treble Rom ?
Click to expand...
Click to collapse
How i can check that?

kapmino269 said:
Write in play store
check treble
And download app .
Click to expand...
Click to collapse
supposedly Yes.
New Picture. https://prnt.sc/n26sz5

kapmino269 said:
@Jorgeapp
Upload picture in another site this site is unsafe or upload it by xda labs apk .
I can't find picture in that site .
Also you don't need to ask for that just google "how to check treble support ".
Click to expand...
Click to collapse
I finally finish the Prenormal RMM state and when i turn ON the OEM unlock the phone restart and return to the factory mode, i check again and the OEM unlock is missing like nothing happend... i dont know what to do, no one has rooted my device... all tutorials are for others models. i also try using kingroot and similars and nothing.
what a disappointment.

Jorgeapp said:
I finally finish the Prenormal RMM state and when i turn ON the OEM unlock the phone restart and return to the factory mode, i check again and the OEM unlock is missing like nothing happend... i dont know what to do, no one has rooted my device... all tutorials are for others models. i also try using kingroot and similars and nothing.
what a disappointment.
Click to expand...
Click to collapse
Hi! I've the same model as you, and it looks like samsung it's updating without the option now.
I wrote about this about 2 month ago i think, if you want you can read it here:
https://forum.xda-developers.com/general/help/oem-t3892877
But, if you want modify some layers read about Andromeda and Substratum here:
https://forum.xda-developers.com/apps/substratum/official-starting-substratum-andromeda-t3798316

kapmino269 said:
Reflash stock and try again alo you can root your j400f:
Unlock oem from DEVELOPERS DEVELOPERS OPTION
Then
- Go to download mode .
-Flash this with odin .
https://github.com/TwrpBuilder/andr....2.3-TwrpBuilder-j4ltejx-2018-10-22_17-38.tar
-Reboot twrp recovery.
-Then flash this by twrp
Rmm disable security :
Link:
https://forum.xda-developers.com/attachment.php?attachmentid=4481843&d=1524258795
-then flash magisk :
Link:
https://github.com/topjohnwu/Magisk/releases/download/v18.1/Magisk-v18.1.zip
---------- Post added at 08:52 PM ---------- Previous post was at 08:49 PM ----------
Don't flash stock send picture from download mode may by another phone and upload it .
Click to expand...
Click to collapse
wow.. i just bought this phone and want root access due to dev needings. i study programming and i was looking for twrp and some way to get root. and you just posted this!. :laugh::laugh::highfive:
just want to know if this works? becuase i already found twrp for the j4+ but was looking for the normal J4.
also i need to learn everything about the prenormal stuff and all that before rooting. but you're a lifesaver.

kapmino269 said:
Flash RMM-State_Bypass_Mesa_v2.zip after installing twrp .
Click to expand...
Click to collapse
I'll do soon as I can.

Forgot to say.. how do you enable oem unlock on this device? Do I have to wait a whole week with it turned on? I want all the necessary information before installing TWRP and rooting. Also.. what about Android pie? Because Samsung posted that they will update this device to Android Pie, same for the j4+ one. I don't want to softbrick the phone or lose root when updating.
Sent from my Samsung SM-J400M using XDA Labs

Alguien tiene algun kernel para el j4lte que funciome para el nethunter ?

Es lo mismo J400 M que J400F
No entiendo ,porque parten hablando del j400 M y terminan dando remedios para el J400 F ....

Just came here as a way to thank everyone for this thread and say that the twrp for j4lte works perfect fine for SM-J400m on latest version android 10. Just enable OEM lock and flash it through ODIN.

[QUOTE = "endmjwknj, postagem: 84400367, membro: 11390151"]
Vim aqui como uma forma de agradecer a todos por este tópico e dizer que o twrp para j4lte funciona perfeitamente bem para SM-J400m na versão mais recente do Android 10. Basta habilitar o bloqueio de OEM e atualizá-lo através do ODIN.
[/CITAR]
can you help me install twrp on android 10 on j400m?

can you help me install twrp on android 10 on j400m?

brunoyp said:
[QUOTE = "endmjwknj, postagem: 84400367, membro: 11390151"]
Vim aqui como uma forma de agradecer a todos por este tópico e dizer que o twrp para j4lte funciona perfeitamente bem para SM-J400m na versão mais recente do Android 10. Basta habilitar o bloqueio de OEM e atualizá-lo através do ODIN.
[/CITAR]
can you help me install twrp on android 10 on j400m?
Click to expand...
Click to collapse
i could but there are guys who are more experienced to help you through all the process. Join this telegram group https://t.me/SamsungGalaxyJ4 and they're certainly assist you without a doubt.

Exynos Galaxy J4 is kind of similar to J3 2017 in terms of chipset and resolution so TWRP and ROMs of J3 2017 may work on J4.
Samsung Galaxy J3 (2017) ROMs, Kernels, Recoveries
Improve your Samsung Galaxy J3 (2017)'s battery life, performance, and look by rooting it and installing a custom ROM, kernel, and more.
forum.xda-developers.com

Question I hope someone can make a tutorial to unlock BL and get root permission

I hope someone can make a tutorial to unlock BL and get root permission。So that people can better use the black shark mobile phone

ÿeah, me too

......

johnny886 said:
中国人已经成功测试了与《黑鲨3》系列相同的解锁方法，但他们不会免费共享信息！
----------
MOD EDIT: English Translation Below
The Chinese have successfully tested the same unlocking method as the "Black Shark 3" series, but they will not share information for free!
Click to expand...
Click to collapse
I feel sad.

johnny886 said:
中国人已经成功测试了与《黑鲨3》系列相同的解锁方法，但他们不会免费共享信息！
----------
MOD EDIT: English Translation Below
The Chinese have successfully tested the same unlocking method as the "Black Shark 3" series, but they will not share information for free!
Click to expand...
Click to collapse
Well is it the same way and files? If it works like the black shark 3. I think you would need a different twrp but it should work the same.

johnny886 said:
中国人已经成功测试了与《黑鲨3》系列相同的解锁方法，但他们不会免费共享信息！
Click to expand...
Click to collapse
It's actually free, but you didn't find it

求教程

http://www.viprom.cn/list/6706.html Here's the black shark 3 unlock tutorial

没有人一样，这手机只在国内发了吧？

ZaneCode6574 said:
没有人一样，这手机只在国内发了吧？好像是···
Click to expand...
Click to collapse

Dont waste your money, Think before you buy. They NEVER released BLACK SHARK 1,2,2PRO,3,3PRO,3S KERNELSOURCES. I think YouTube reviewers need to point that as well

Jbazt_katuforzs said:
Dont waste your money, Think before you buy. They NEVER released BLACK SHARK 1,2,2PRO,3,3PRO,3S KERNELSOURCES. I think YouTube reviewers need to point that as well
Click to expand...
Click to collapse
Personally I don't need sources, but just TWRP to debloat. I would be fine with the regular ROM
I just use this phone for gaming like if it was a videoconsole, for customizing I have my POCO F1 as my daily driver.

anyone who tried this?
How to Root Xiaomi Black Shark 4 – Two Working Methods!
In this guide, I will show you how to root Xiaomi Black Shark 4 using magisk. Because in this article we will share with you working method.
magiskupdate.com

migsymigs said:
anyone who tried this?
How to Root Xiaomi Black Shark 4 – Two Working Methods!
In this guide, I will show you how to root Xiaomi Black Shark 4 using magisk. Because in this article we will share with you working method.
magiskupdate.com
Click to expand...
Click to collapse
That is a useless placeholder site, that just uses each brand and model and sets the exact same page for the effect
They say "download the latest TWRP from twrp.me" but obviously, there is not TWRP for Black Shark 4 yet (and I have my doubts it will ever be since generally Black Shark phones have been mostly disregarded in terms of development since core kernels are never released)
Let's see how it goes.

aa2994576 said:
I hope someone can make a tutorial to unlock BL and get root permission。So that people can better use the black shark mobile phone
Click to expand...
Click to collapse
You need a modified firehose to flash in edl to unlock BL. Google helps on how to do this
The method isn't even "chinese" but from qualcomm (basically for oem's).

Jbazt_katuforzs said:
Dont waste your money, Think before you buy. They NEVER released BLACK SHARK 1,2,2PRO,3,3PRO,3S KERNELSOURCES. I think YouTube reviewers need to point that as well
Click to expand...
Click to collapse
Well most youtubers (especially those reviewing 100000$ phones) get those phones from oems and oem's dont like the custom rom development--> they will just cut the free phones for the reviewers (kinda like Nvidia tried with hardware unboxed). Also those reviewers probably cant even install a custom rom....

MiSSigNNo said:
Personally I don't need sources, but just TWRP to debloat. I would be fine with the regular ROM
I just use this phone for gaming like if it was a videoconsole, for customizing I have my POCO F1 as my daily driver.
Click to expand...
Click to collapse
Don't debloat a phone without any possibilities of getting back a working stock rom from oem with TWRP (also debloating in TWRP on a phone with super partition will break everything, leaving u with a 700 bucks paper weight) use magisk and system app debloater (if sth goes wrong disable module/root and you are back to stock)
Do you feel save with a recovery (which can easily be modified to always have access to everything u do on the phone) without any sources and from some shady chinese guy who wants to make money with it? He could just remotely lock your phone and make you pay to get the unlock token... and then do it again xD
With kernel sources you will also get a working and propper TWRP recovery, without you will always be bound to stock kernel (which you cant update bcs blackshark doesn't supply stock roms/doesn't update rooted phones) at least...

wertus33333 said:
You need a modified firehose to flash in edl to unlock BL. Google helps on how to do this
Click to expand...
Click to collapse
Can you elaborate on this? I have not found anything relevant regarding this topic

MiSSigNNo said:
Can you elaborate on this? I have not found anything relevant regarding this topic
Click to expand...
Click to collapse
https://github.com/Naveen3Singh/BLUnlocker but bs does not have official stock firmware downloads... so wait for a mayor (android) update until you update your phone to get the update download link using adb

Compré la versión china de Black Shark 4 y no la versión global, el problema que lo hace va fatal, el GPS no funciona bien, los servicios de google tampoco, ¿hay alguna forma de pasar la rom china a la rom global? No he encontrado una forma en ninguna página todavía, si alguien pudiera ayudarme con esto lo agradecería, o al menos alguien que me enseñe cómo erradicar los servicios de Google o cuál es la mejor manera para que funcionen No es necesario root o instalar twrp porque hasta ahora es imposible
Español
Compré la versión china de Black Shark 4 y no la versión global, el problema que lo hace va fatal, el GPS no funciona bien, los servicios de google tampoco, ¿hay alguna forma de pasar la rom china a la rom global? No he encontrado una forma en ninguna página todavía, si alguien pudiera ayudarme con esto lo agradecería, o al menos alguien que me enseñe erradicar los servicios de Google o cuál es la mejor manera para que funcionen sin necesidad de ser root o instalar twrp porque hasta ahora es imposible