Hi,
I really need some help. My phone is gem-702l model, on B112 stock rom of 703l.
Now that Huawei has released a stock Android 6.0 (B201) for gem-702l, I am thinking about switching back.
Here are the thing I did and problem that stopped me.
1. I updated to B209 following the instruction in XDA without any problem.
2. When successfully on B209, I downloaded my stock B201 rom in Huawei website and extracted the 5 required img files: recovery, system, boot, cust, userdata
3. I fastboot flash the 5 img files and reboot. So far so good. The About Pone is correct except internal storage volume.
4. I factory reset and format the internal SD. Now everything in About Phone is correct.
5, I put the dload of b201 in my MicroSD. Strangely there's no "update from SD Card" option, So I use the three key(power, vol+/-)to hard flash the whole dload directory. It failed.
THe problem is : it seems that I can only fastboot flash 5 img files of 702l, there's no way of doing the whole dload update.
Now my phone is not fully converted to Gem-702l. it's kind of half 703l and half 702l in android 6.0.
Is there anything I missed or anything I can do to make it fully converted to 702l?
Please help! thank you so much.
iamhcg said:
Hi,
I really need some help. My phone is gem-702l model, on B112 stock rom of 703l.
Now that Huawei has released a stock Android 6.0 (B201) for gem-702l, I am thinking about switching back.
Here are the thing I did and problem that stopped me.
1. I updated to B209 following the instruction in XDA without any problem.
2. When successfully on B209, I downloaded my stock B201 rom in Huawei website and extracted the 5 required img files: recovery, system, boot, cust, userdata
3. I fastboot flash the 5 img files and reboot. So far so good. The About Pone is correct except internal storage volume.
4. I factory reset and format the internal SD. Now everything in About Phone is correct.
5, I put the dload of b201 in my MicroSD. Strangely there's no "update from SD Card" option, So I use the three key(power, vol+/-)to hard flash the whole dload directory. It failed.
THe problem is : it seems that I can only fastboot flash 5 img files of 702l, there's no way of doing the whole dload update.
Now my phone is not fully converted to Gem-702l. it's kind of half 703l and half 702l in android 6.0.
Is there anything I missed or anything I can do to make it fully converted to 702l?
Please help! thank you so much.
Click to expand...
Click to collapse
First you need to go back to the last 703L 5.1 system (B112) then flash the universal cust mod, then try the dload to B201. You also may have to go back to the last 702L 5.0 rom before you try to update to B201 but i'm not totally sure.
ajsmsg78 said:
First you need to go back to the last 703L 5.1 system (B112) then flash the universal cust mod, then try the dload to B201. You also may have to go back to the last 702L 5.0 rom before you try to update to B201 but i'm not totally sure.
Click to expand...
Click to collapse
thanks.
I downgraded to B112 successfully and then tried the dload update. It didn't even go through the first 5 seconds and failed. I guess it's because my phone's on 703L cust so the 702l stock rom didn't apply to it.
As for downgrading to 5.0, there's still no way of doing that for 702l, so I am still stuck here.
******edited***
I just "fake flashed" back to5.0, which means fastboot flash the required img files, and tried to dload update to B201 of 702l.
It's still not working. Now I am at my wit's end.
iamhcg said:
thanks.
I downgraded to B112 successfully and then tried the dload update. It didn't even go through the first 5 seconds and failed. I guess it's because my phone's on 703L cust so the 702l stock rom didn't apply to it.
As for downgrading to 5.0, there's still no way of doing that for 702l, so I am still stuck here.
******edited***
I just "fake flashed" back to5.0, which means fastboot flash the required img files, and tried to dload update to B201 of 702l.
It's still not working. Now I am at my wit's end.
Click to expand...
Click to collapse
Flash the B112 universal cust in TWRP then fastboot flash back the stock recovery, then try the dload again. If that doesn't work, flash twrp, then the cust mod, then the stock recovery then so a factory reset from settings. If the reset completes successfully then flash twrp again then the cust mod then stock recovery then try the dload method again.
ajsmsg78 said:
Flash the B112 universal cust in TWRP then fastboot flash back the stock recovery, then try the dload again. If that doesn't work, flash twrp, then the cust mod, then the stock recovery then so a factory reset from settings. If the reset completes successfully then flash twrp again then the cust mod then stock recovery then try the dload method again.
Click to expand...
Click to collapse
That's exactly what I did. The dload just wouldn't go beyond 5 seconds.
The problem, I think, is that the universal cust marked the phone as 703l(that's the point of universal cust), but the stock rom B201 is for 702l. Therefore, the first 5 seconds of dloading when it verified the model, the stock rom and the model just didn't match. So the dload failed.
There's no flashable cust for 702l to make the phone match the requirement of stock B201 rom. I think this might be where the problem is.
The cust mod includes the cust from the 701L and 702L as well so it should work as long as you go back to B112. What is the reason you want to go back to the 702L firmware?
ajsmsg78 said:
The cust mod includes the cust from the 701L and 702L as well so it should work as long as you go back to B112. What is the reason you want to go back to the 702L firmware?
Click to expand...
Click to collapse
There are certain functions that only exist in my region, such as the nationwide SMS warning regarding natural disasters. It's a system that being developing in my country. All phone brands will integrate the thing in their roms and push out for OTA. I would like to be on the receiving end. Also, If I need to RMA my phone someday, it will be nice to be able to switch back to stock rom for warranty.
I thought it was easier to switch between models when they were both on the same version of Android. I was wrong.
Hello,
Where can I find the Android 6.0 (B201) for gem-702l ?
Thanks
maskman1 said:
Hello,
Where can I find the Android 6.0 (B201) for gem-702l ?
Thanks
Click to expand...
Click to collapse
http://consumer.huawei.com/tw/tablets/support/downloads/mediapad-x2-tw.htm
Here. But it's for Taiwan gem-702l and it's still a test version, I am not sure if it's applied to other region.
I'll advise you to wait a bit longer for the official version to be out.
Ok, thanks for the input!
Related
please help me i have 701l and updat it to 703 and lose network
i do
• Unlock Bootloader
• Flash X2_TWRP_CN_kangvip.rar
• Flash kangVIP b015 by TWRP
• Extract stock rom b015 and flash 4 img via fastboot
and lose network phone say no service what can i do if i Flash stock rom b106 via dload folder it will come up ?
or how can i return to GEM-701LV100R001C199B001
gaafar13 said:
please help me i have 701l and updat it to 703 and lose network
i do
• Unlock Bootloader
• Flash X2_TWRP_CN_kangvip.rar
• Flash kangVIP b015 by TWRP
• Extract stock rom b015 and flash 4 img via fastboot
and lose network phone say no service what can i do if i Flash stock rom b106 via dload folder it will come up ?
or how can i return to GEM-701LV100R001C199B001
Click to expand...
Click to collapse
You can go back to GEM-701LV100R001C199B001 via dload method.
Download GEM-701LV100R001C199B001 from http://4pda.ru/forum/lofiversion/index.php?t692755-100.html
eennap said:
You can go back to GEM-701LV100R001C199B001 via dload method.
Download GEM-701LV100R001C199B001 from
so can i contain and network will be come or no ?
and my baseband version is unknown is that normally
Click to expand...
Click to collapse
eennap said:
You can go back to GEM-701LV100R001C199B001 via dload method.
Download GEM-701LV100R001C199B001 from
Click to expand...
Click to collapse
so can i contain and network will be come or no ?
and my baseband version is unknown is that normally
now all thing is okay but emui information error like ram my ram is 2 now he write 1 resolution 540*960 android version 4.3 ???
now my phone on X2-B111_Kangvip
but my emui version 2
android version 4.3
ram 1
resolution 540*960
cpu quad core 1.2 ghz
can go back to GEM-701LV100R001C199B001 via dload method.
Just flash the universal Cust, and this will fix the false info "about the phone".
Did you go all the steps which I have described here? http://forum.xda-developers.com/showpost.php?p=64623653&postcount=378
I had tried to jump directly vom B106 to B111KangVIP, but it was not working properly.
If you try to install back the B001 you will perhaps loose the function to charge the battery. So be warned.
And by the way: my 701L had version B003. Are you sure your phone had B001? If yes ok. But if you have fully upgraded to Android 5.1.1 the flash of a lower version could produce unwanted effects.
After some experiments I restarted by flashing the B106 did a factory reset and then installed B109 and B111 stock via dload and then B111KangVIP. Then you will have back the full working machine and you will be happy.
audioralf said:
Just flash the universal Cust, and this will fix the false info "about the phone".
Did you go all the steps which I have described here? http://forum.xda-developers.com/showpost.php?p=64623653&postcount=378
I had tried to jump directly vom B106 to B111KangVIP, but it was not working properly.
If you try to install back the B001 you will perhaps loose the function to charge the battery. So be warned.
And by the way: my 701L had version B003. Are you sure your phone had B001? If yes ok. But if you have fully upgraded to Android 5.1.1 the flash of a lower version could produce unwanted effects.
After some experiments I restarted by flashing the B106 did a factory reset and then installed B109 and B111 stock via dload and then B111KangVIP. Then you will have back the full working machine and you will be happy.
Click to expand...
Click to collapse
where is the universal Cust ??? my phone had B001 my ask can i back the B001 or cant
You find univeral cust here: https://drive.google.com/file/d/0B5I_q70mNuR4VFhMc21DNGYtMHc/view?usp=sharing
You must flash it via 5.1.1 TWRP https://drive.google.com/file/d/0B5I_q70mNuR4Uy1XdXVoSG1SMXc/view?usp=sharing
If you already are on B111 the way back may lead you in disability to charge the battery. So most people here will say NO. That was also my experience. But you can try that and report, if you see the light and lightning icon for charging. This would be interesting.
audioralf said:
You find univeral cust here: https://drive.google.com/file/d/0B5I_q70mNuR4VFhMc21DNGYtMHc/view?usp=sharing
You must flash it via 5.1.1 TWRP https://drive.google.com/file/d/0B5I_q70mNuR4Uy1XdXVoSG1SMXc/view?usp=sharing
If you already are on B111 the way back may lead you in disability to charge the battery. So most people here will say NO. That was also my experience. But you can try that and report, if you see the light and lightning icon for charging. This would be interesting.
Click to expand...
Click to collapse
i will tray but if it cant charging can i return it ???
and which room hasn't Chinese language
Do a Backup in TWRP before you start the dload from the GUI.
If you have flashed the universalt cust you will see that the Andriod verson and storage Info will be correct.
But if did not go thru B106,B109,B111stock you will not have a full working Android 5.1.1. If this would be possible Huawiei would offer the dload for B111 if you are ond B106. No they don't. They inform you to upgrade to 109 via OTA or dload. When on B109 you will get the message tha there is a update for B111. So I guess we have to go that way, even if it seems that you have installed a B111. You have the wrong infos in the "about phone" and the universal cust is inside the B111KangVip.zip file. So this is curious. Start with flashing universal Cust, then flash 4 images for B106 and then go all steps via dload.
flashed the universalt cust and information still error
Do a Backup within TWRP (NANDROD) . Then do the dload after you have started the rom.
All ROMs for the 703 start in chinese, but you will be able to set the language. B111KANGVip has removed the most chinese.
---------- Post added at 10:45 PM ---------- Previous post was at 10:36 PM ----------
Ok if you still have the information error this is an indeed, that you must do all steps going thru all the fw versions.
Do that NANDROID of incomplete B111. If you have the "not charging problem" turn the device complete off to charge for a while. If it does not charge do a recover of the B111 to charge, then continue.
Start to install B106 and follow my instruction list http://forum.xda-developers.com/showpost.php?p=64623653&postcount=378
4. b This flashes GEM-703L official stock ROM b106 via dload folder. [This flash maybe abort on about (90-95%), but this does not effect the next steps] Wait to press ok until you have exchanged the dload folder for the next steps.
i wont do that setup restart and do nothing
gaafar13 said:
flashed the universalt cust and information still error
Click to expand...
Click to collapse
Do you have your original cust folder or your original rom? You may have a different cust folder based on your region and I can add your cust folder to the cust mod so when you flash it your information will be correct.
i reinstall all and still stuck in fouls information
ajsmsg78 said:
Do you have your original cust folder or your original rom? You may have a different cust folder based on your region and I can add your cust folder to the cust mod so when you flash it your information will be correct.
Click to expand...
Click to collapse
no i haven't what can i do
but i have all old info like Model IMEI Serial NR it can help
gaafar13 said:
no i haven't what can i do
Click to expand...
Click to collapse
If I had a link to download your original rom I could extract the cust from it and make it flashable.
i research for that room but cant find its call GEM-701LV100R001C199B001 please help me
Updated Nov. 23, 2016:
For 701l users, if you need to downgrade, check out dimitarnc's post of how a 701L downgrading to B005 here
http://forum.xda-developers.com/showpost.php?p=69747367&postcount=6
===========
Gem 702L user's downgrade guide:
For people who want to convert their devices back to 702L and downgrade, there's a way. After Huawei Taiwan releases a downgrade pack, it's actually easy.
Result:
Battery charging is normal.
Debugging mode can be turned on.
Basically everything just working!
You have a functioning stock gem-702L.
Cautions:
1, My device was purchased in Taiwan. All files I used in this process are for TW gem-702l. Please download all the necessary files in TW version, just in case.
2, I am not a dev. I have no ability to help you if you brick your device. You need to consider this before you decide to go ahead.
Alright, here we go.
Preparations:
1. Download 702L downgrade pack (it's only 2 kb): http://download-c.huawei.com/download/downloadCenter?downloadId=81363&version=323452&siteCode=tw
2. Download 702L TW B005 stock firmware(1.25gb): http://download-c.huawei.com/download/downloadCenter?downloadId=59524&version=193667&siteCode=tw
3. Download 702L TW B005 flashable cust zip (Thank ajsmsg78 for making it a while back):https://dl.dropboxusercontent.com/u/19718077/CUST-GEM-702L-D001.zip
4. Download TWRP-ENG-5.0.img (please find it somewhere in the forum).
Process:
1. My device was on 703L Android 5.1.1. I am not sure if you can do it directly from android 6.0, feel free to try or downgrade to B112 stock first.
2. extract boot.img, cust.img, system.img, userdata.img, recovery.img from gem-702l B005 stock rom, and fastboot flash all of them.
Boot up your phone, do minimal setup. Now everything in "About phone" is correct except the internal storage volume.
Do a factory reset and format internal storage. Now everything in "About phone" is correct.
3, optional:
if your "About phone" is all messed up, you need to do this. Otherwise, not necessary for legit 702L devices.
Flash twrp 5.0, then flash gem-702l b005 cust zip. Then flash stock recovery to format your internal storage.
4. Extract files from the downgrade pack. Put the dload directory in your SDcard. Manual update it. It should go through 100%.
(If it fails, that means your system's still on Android 5.1.1, and this method doesn't apply to your device. No need to go any further, just flash back to gem-703L ROMs and stay there.)
6, After the phone boot up, copy the full gem-702l B005 stock firmware to your SDcard, manual update it. It should go through 100%.
Voila! You are back.
Now you are on gem-702L TW B005, You can upgrade to B201 if you want, or flash back to your regional stock rom.
Here's my phone back to gem-702L and upgrade to B201.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What if I am on Kangvip B211?
Do i have to go back the whole way or can I just put the Rom and the Cust from 702L on my converted 702?
Thx, Ray
RayfG said:
What if I am on Kangvip B211?
Do i have to go back the whole way or can I just put the Rom and the Cust from 702L on my converted 702?
Thx, Ray
Click to expand...
Click to collapse
I'll say it's safer to get back to stock B112 (Android 5.1.1).
you need to do a fastboot flash of B005(android 5.0) imgs during the process. I am not sure if you flash an android 5.0 img in Android 6.0, it won't go into bootloop or something.
It takes certain procedure even for a 703L to go back from 6.0 to 5.1.1, so I wouldn't recommend you to do the fastboot flash directly in Android 6.0.
This is a big effort and i d'ont know, if this fits for the Rom..........
I think i ll stay at Kangvip.
Thy for ur reply.
Greetz, Ray
RayfG said:
This is a big effort and i d'ont know, if this fits for the Rom..........
I think i ll stay at Kangvip.
Thy for ur reply.
Greetz, Ray
Click to expand...
Click to collapse
No problem. This is a backup plan.
Now that there is a safe way to get back, we can switch between 702l and 703l roms anyway we like it.
Getting fastboot error on system.img flashing
load_file : could not allocate -1808753180 bytes
rakesh_4utoo said:
Getting fastboot error on system.img flashing
load_file : could not allocate -1808753180 bytes
Click to expand...
Click to collapse
Change Version ADB.
---------- Post added at 08:28 AM ---------- Previous post was at 08:22 AM ----------
RayfG said:
What if I am on Kangvip B211?
Do i have to go back the whole way or can I just put the Rom and the Cust from 702L on my converted 702?
Thx, Ray
Click to expand...
Click to collapse
You must extract boot.img, cust.img, system.img, userdata.img, recovery.img from gem-702l B112 stock rom, and fastboot flash all of them First.
Great guide. I can see this being useful for anyone wanting to sell their phone and bring it back to stock after they already converted. I'll probably keep mine converted as the same thing with updates will probably happen in the future.
---------- Post added at 01:55 PM ---------- Previous post was at 01:54 PM ----------
rakesh_4utoo said:
Getting fastboot error on system.img flashing
load_file : could not allocate -1808753180 bytes
Click to expand...
Click to collapse
Install TWRP and try wiping system first.
What about the 701?
Would it be converted to 702 that way?
Could we change it to 701 after running downgrade script via fastboot flash b003 files from 701 and dload B003?
My device: 701->703 Kang VIP B209
audioralf said:
What about the 701?
Would it be converted to 702 that way?
Could we change it to 701 after running downgrade script via fastboot flash b003 files from 701 and dload B003?
My device: 701->703 Kang VIP B209
Click to expand...
Click to collapse
I think the trick is how to cheat the System that your device is in certain region for local firmware dload to work.
And that is where editing oeminfo sets in.
For 701L, since there's only downgrade pack for 702L or 703L, you need to downgrade as a 702L or 703L.(I recommand 702L because it's easier)
Now when your are on 702L B005, next step is to edit oeminfo to switch back to 701L.
You need to edit your oeminfo to eu. Then you can flash any Eu firmware, in this case, B003 701L. Then you are back to 701L.
I don't have a 701L so I can't try. but here's an instruction for Huawei devices to switching regions.. You edit your oeminfo to hw/eu(europe), then you can cheat the system that you are now an Europe device. It will let you go through the dloading of B003 for 701L.
Maybe someone wants to give it a try.
If it works, we might not even need that much work to switch between 703L and 702L/701L, we can simply edit our oeminfo and Voila!
(The link is not the original post but a translation. You can go to the OP to check out the necessary files. )
http://forum.xda-developers.com/showpost.php?p=66295992&postcount=8
iamhcg said:
For people who want to convert their devices back to 702L and downgrade, there's a way. After Huawei Taiwan releases a downgrade pack, it's actually easy.
Result:
Battery charging is normal.
Debugging mode can be turned on.
Basically everything just working!
You have a functioning stock gem-702L.
Cautions:
1, My device was purchased in Taiwan. Therefor, all files I used in this process are for TW gem-702l. Please download all the necessary files in TW version, just in case.
I think it works on all 702l devices of other regions (I can't see why not).
2, I am not a dev. I have no ability to help you if you brick your device. You need to consider this before you decide to go ahead.
Alright, here we go.
Preparations:
1. Download 702L TW downgrade pack (it's only 2 kb): http://download-c.huawei.com/download/downloadCenter?downloadId=81363&version=323452&siteCode=tw
2. Download 702L TW B005 stock firmware(1.25gb): http://download-c.huawei.com/download/downloadCenter?downloadId=59524&version=193667&siteCode=tw
3. Download 702L TW B005 flashable cust zip (Thank ajsmsg78 for making it a while back):https://dl.dropboxusercontent.com/u/19718077/CUST-GEM-702L-D001.zip
4. Download TWRP-ENG-5.0.img (please find it somewhere in the forum).
Process:
1. My device was on 703L B112 stock. I am not sure if you can do it directly from android 6.0, feel free to try or downgrade to B112 stock first.
2. extract boot.img, cust.img, system.img, userdata.img, recovery.img from gem-702l B005 stock rom, and fastboot flash all of them.
Let the phone boot into system, do minimal setup. Now everything in "About phone" is correct except the internal storage volume.
3. (I am not sure if this step is necessary but I did it anyway) Flash twrp 5.0, then flash gem-702l b005 cust zip.
4. Flash stock recovery, then do a factory reset and format internal storage. Now everything in "About phone" is correct.
5. Extract dload from the downgrade pack. Put the it in your sdcard. Dload it. It should go through 100%.
(If it fails, that means your system's still on Android 5.1.1, and this method doesn't apply to your device. No need to go any further, just flash back to gem-703L B112 and stay there.)
6, Aftet the phone boot up, copy the full gem-702l B005 stock firmware to your sdcard, then update it by dloading. It should go through 100%.
Voila! You are back.
Now you are on gem-702L TW B005, You can upgrade to B201 if you want, or flash back to your regional stock rom.
Here's my phone back to gem-702L and upgrade to B201.
Click to expand...
Click to collapse
Thanks for outlining the steps - I managed to bring my 702L on 703L-B109 ROM downgrade back to 702L-Taiwan-B005 and then upgrade to 702L-Taiwan-B201 Android 6.0 !!
Guyzz. For those who upgraded their phones to B201 .. do you have any bugs ?
I installed the rooted version on my 701L and it works fine but i have some issues with some web apps .. and i have strange error in the system log ..
Am not sure if that bug exits becuase it's a beta build or just because i converted my phone ..
Does anyone know what's happening
Sent from my GEM-702L using XDA-Developers mobile app
h.jubail said:
Guyzz. For those who upgraded their phones to B201 .. do you have any bugs ?
I installed the rooted version on my 701L and it works fine but i have some issues with some web apps .. and i have strange error in the system log ..
Am not sure if that bug exits becuase it's a beta build or just because i converted my phone ..
Does anyone know what's happening
Sent from my GEM-702L using XDA-Developers mobile app
Click to expand...
Click to collapse
I don't have any problem on my 702L B201
I am on stock rom, rooted it by myself.
Can you just see the system log .. please ??
Sent from my GEM-702L using XDA-Developers mobile app
h.jubail said:
Can you just see the system log .. please ??
Sent from my GEM-702L using XDA-Developers mobile app
Click to expand...
Click to collapse
Sorry I've been playing around different roms so I just switched to 703L B111 near stock. I am not currently on 702L.
But when I was on it, there was one thing. One of my game apps counldn't connect to my Facebook account due to some "Hash key invalid" in B005 firmware, But the problem was solved when I upgraded to B201. Other than that, everything worked fine.
Hello,
now I'm on kangvip 211, can i go back to stock 702L flashing cust, system, boot, userdata... from b202 or I have to do more steps?????
Thanks
up20 said:
Hello,
now I'm on kangvip 211, can i go back to stock 702L flashing cust, system, boot, userdata... from b202 or I have to do more steps?????
Thanks
Click to expand...
Click to collapse
If you want to switch back to stock 702L from 703L roms, you need to do the full downgrade and conversion.
HI all,
i'm stuck at trying to dload the downgrade package. Somehow dload method doesn't startup, no matter which way i try: Updater=> Local Update or Vol Up+Down+Power.
Local updates does nothing and ends up normal boot up after another restart.
Vol up down pwr goes to TRWP.
Any help is appreciated.
Thanks and Regards,
Kevin Chan
I had similar situation and could solve it. I can not exactly remember, but it depends also on which version you were before.
In TWRP do factory reset.
In bootloader mode flash recovery boot and system.img from b112.
After system start do factory reset on EMUI. If system does not start try same with b106 files.
If you are on B112, dload update.app for B211 and then dload update.zip to B211.
In this state the downgrade script may run.
To continue normal install KangVIP or b203 international.
My device: 701->703 B211 xposed 86
iamhcg said:
Updated Nov. 23, 2016:
For 701l users, if you need to downgrade, check out dimitarnc's post of how a 701L downgrading to B005 here
http://forum.xda-developers.com/showpost.php?p=69747367&postcount=6
===========
Gem 702L user's downgrade guide:
For people who want to convert their devices back to 702L and downgrade, there's a way. After Huawei Taiwan releases a downgrade pack, it's actually easy.
Result:
Battery charging is normal.
Debugging mode can be turned on.
Basically everything just working!
You have a functioning stock gem-702L.
Cautions:
1, My device was purchased in Taiwan. All files I used in this process are for TW gem-702l. Please download all the necessary files in TW version, just in case.
2, I am not a dev. I have no ability to help you if you brick your device. You need to consider this before you decide to go ahead.
Alright, here we go.
Preparations:
1. Download 702L downgrade pack (it's only 2 kb): http://download-c.huawei.com/download/downloadCenter?downloadId=81363&version=323452&siteCode=tw
2. Download 702L TW B005 stock firmware(1.25gb): http://download-c.huawei.com/download/downloadCenter?downloadId=59524&version=193667&siteCode=tw
3. Download 702L TW B005 flashable cust zip (Thank ajsmsg78 for making it a while back):https://dl.dropboxusercontent.com/u/19718077/CUST-GEM-702L-D001.zip
4. Download TWRP-ENG-5.0.img (please find it somewhere in the forum).
Process:
1. My device was on 703L Android 5.1.1. I am not sure if you can do it directly from android 6.0, feel free to try or downgrade to B112 stock first.
2. extract boot.img, cust.img, system.img, userdata.img, recovery.img from gem-702l B005 stock rom, and fastboot flash all of them.
Boot up your phone, do minimal setup. Now everything in "About phone" is correct except the internal storage volume.
Do a factory reset and format internal storage. Now everything in "About phone" is correct.
3, optional:
if your "About phone" is all messed up, you need to do this. Otherwise, not necessary for legit 702L devices.
Flash twrp 5.0, then flash gem-702l b005 cust zip. Then flash stock recovery to format your internal storage.
4. Extract files from the downgrade pack. Put the dload directory in your SDcard. Manual update it. It should go through 100%.
(If it fails, that means your system's still on Android 5.1.1, and this method doesn't apply to your device. No need to go any further, just flash back to gem-703L ROMs and stay there.)
6, After the phone boot up, copy the full gem-702l B005 stock firmware to your SDcard, manual update it. It should go through 100%.
Voila! You are back.
Now you are on gem-702L TW B005, You can upgrade to B201 if you want, or flash back to your regional stock rom.
Here's my phone back to gem-702L and upgrade to B201.
Click to expand...
Click to collapse
Hi - I need this stock ROM and can't find a download link anywhere. can you drop it to me? GEM-702L / V100R001C209B005CUS
Hello!
I own a FRD-L19C432 device loaded with B120 FW, TWRP flashed to erecovery, the recovery partition is stock (?) since I haven't flashed anything on it and it is also rooted.
A few days ago, I got the notification of the availability of B131 update. According to some info I've read over the web, the erecovery isn't/wasn't used for anything, so I tried my luck and proceeded with updating operation from UI. It booted to recovery, failed to install, showed some error and booted to OS, that stills on B120.
Introduction made, the question is:
I already downloaded the FRD-L19C432B131 full update zip, can I simply flash it through the dload method, or, must I first unroot and flash stock B120 recovery in order to perform the dload flash?
If so, where can I get the B120 stock recovery and erecovery? I'm not finding it while using the Firmware Finder app by Team MT.
Hope you can give some help.
Tks,
RM
you can extract the recovery.img using huawei update extractor and then flash via adb or the multitool
jkccl9 said:
you can extract the recovery.img using huawei update extractor and then flash via adb or the multitool
Click to expand...
Click to collapse
Thank you for trying to help, but that's not what I'm asking in first place:
I already downloaded the FRD-L19C432B131 full update zip, can I simply flash it through the dload method, or, must I first unroot and flash stock B120 recovery in order to perform the dload flash?
Click to expand...
Click to collapse
Thank you.
RM
omartins said:
Thank you for trying to help, but that's not what I'm asking in first place:
Thank you.
RM
Click to expand...
Click to collapse
well you have to unroot and install stock recovery before being able to update
jkccl9 said:
well you have to unroot and install stock recovery before being able to update
Click to expand...
Click to collapse
Stock recovery from B120, right? If so, where can I find this recovery since I'm not finding the full B120 FW zip?
omartins said:
Stock recovery from B120, right? If so, where can I find this recovery since I'm not finding the full B120 FW zip?
Click to expand...
Click to collapse
Try huawei firmware Updater by team mt (can't remember full name) to search for the last update and extract using tool from post 1 ^^
omartins said:
Hello!
I own a FRD-L19C432 device loaded with B120 FW, TWRP flashed to erecovery, the recovery partition is stock (?) since I haven't flashed anything on it and it is also rooted.
A few days ago, I got the notification of the availability of B131 update. According to some info I've read over the web, the erecovery isn't/wasn't used for anything, so I tried my luck and proceeded with updating operation from UI. It booted to recovery, failed to install, showed some error and booted to OS, that stills on B120.
Introduction made, the question is:
I already downloaded the FRD-L19C432B131 full update zip, can I simply flash it through the dload method, or, must I first unroot and flash stock B120 recovery in order to perform the dload flash?
If so, where can I get the B120 stock recovery and erecovery? I'm not finding it while using the Firmware Finder app by Team MT.
Hope you can give some help.
Tks,
RM
Click to expand...
Click to collapse
It's weird and sad to hear that you flashed twrp to erecovery.
Let me explain u briefly what erecovery does . when u use dload method (while flashing an update.app) , erecovery extracts all .img and .bin files and later it flashes the each file (image files) to its respective partition .
In ur case. The normal stock recovery flashed the update.zip which was included in the script . but it failed to extract update.app in the update.zip and finally output u got is error.
Solution:
The only solution for this problem is ..
Download a full update package of stock ROM...
Extract Update.app (use huawei update extractor) and then find erecovery.IMG
Install adb and fastboot drivers ..
Put your phone in fastboot mode .
Connect to PC ..
In the terminal (command prompt) , type this command and hit enter .
fastboot flash erecovery erecovery.img
(From here u can reinstall the update.zip ) if it fails .
And then try to shutdown the phone , later put full update.app in dload folder ..
Use the 3 button combination to install full package of update.app and thats it .
It reboots to stock again .besure to take a backup of your data before attempting above step . after everything done check for update from settings and install it normally
hello!
Thanks for a proper answer
At the moment I'm stuck (paused) at the TWRP backup operation, since I don't seem to be able to perform a full back to internal storage (with the previous NEXUS phones I owned it was possible...) I need first to get an USB-C adapter in order to use USB OTG to perform the safety backup.
After That I'll flash B120 stock recovery and erecovery, unroot and dload the new FW version.
Meanwhile, another question: Using the FW Finder APP from Team MT on Windows it gets a FRD-L19C432B131 result, while on the Android version of the same AP it only finds B130, not B131 (?). On the other hand, I can only find the B120 full FW over Android APP, and don't seem to find it while using Windows... Any idea why this occurs?
RM
Hello!
Task accomplished! TWRP full backup made, flashed stock recoveries from B120 and after that flashed B131 update.app though dload method.
Everything went OK except for the fact I got bootloader relocked after the second flash. I miss the simplicity of the Nexus devices...
With the TWRP backup made before I was able to restore most of the definitions though. It would be nice to digg a workaround to flash update.app without getting bootloader relocked...
I wonder if extracting boot, system and recoveries IMGs and flash all this through fastboot wouldn't work!? Did anyone tried?
RM
**edit 4/2/17: Marked as solved, successfully de-bricked and upgraded to B203, but still do not have working SIM card / 4G data. **
WIll post an update with complete de-bricking procedure summary from my experience to original post soon, for others enountering similar problem from beginners perspective.
Continued on thread for [ROM] B203 for GEM-702L to find solution for SIM card issue
======================= Original post: ===============================
Hi guys!
I completely soft-bricked my Huawei Mediapad X2 702L. I tried flashing with the "B112 Rooted with GAPPS" ROM, , but it's booting into a boot loop. I also (somehow) wiped my stock backup in the process!
How can you reflash with completely stock ROM?
All the "reflash from stock" instructions I've seen say I need a 'boot.img', 'cache.img', 'recovery.img' and 'cust.img'. I have a stock ROM, but it doesn't include anything but an 'UPDATE.APP' file. Where do I get any of those?
- I have TWRP 5.1 installed
- I have downloadedthe stock ROM GEM-703L -B112 (contains /dload/UPDATE.APP)
So factory reset in TWRP.
Flash the recovery.img for 112
Start the external sd dload Downgrade script via 3 button press without USB connection. (Search forum for link). If successful then exchange content on external sd dload with the files for b203.
Start dload via 3 buttons.
Install TWRP
Install KangVIP 212
My device: Mate 9 superroot, Mediapad X2 GEM 701->703 B212 KangVIP (AJ mod)
First of all indeed, try "factory reset in TWRP" as audio ralf suggest, that could be enough ?
Then to get all .img files from any update .app, use on your PC the Huawei update extractor software: Here are the steps:
1) download the desired rom
2) download & install huawei update extractor: http://forum.xda-developers.com/showthread.php?t=2433454
3) extract .img files from the downloaded rom.
4) install ADB on your computer
5) Fastboot flash the .img files on your phone
Details:
http://forum.xda-developers.com/showpost.php?p=56447461&postcount=17
http://forum.xda-developers.com/showpost.php?p=55657932&postcount=18
http://forum.xda-developers.com/showpost.php?p=55640429&postcount=15?
Other sources for ADB if the link is dead:
https://androidmtk.com/download-minimal-adb-and-fastboot-tool
http://lifehacker.com/the-easiest-way-to-install-androids-adb-and-fastboot-to-1586992378?
Source to roms that audioralf suggest, in addition of the B112 you have:
http://consumer.huawei.com/tw/support/downloads/detail/index.htm?id=92804&key4=GEM-702LC158B203
https://www.androidfilehost.com/?fid=457095661767132437 (the TWRP you have to install before installing this B212 Kangvip slim, is the android 6 TWRP: https://drive.google.com/file/d/0B5I_q70mNuR4YWZOV29remJmZFU/view?usp=sharing )
then use the android dev sub-forum here to find custom roms.
===============
Note that the more advanced roms usable with your device are:
official Huawei's B203 for 702L
custom ajsmsg78's B212 Kangvip slim
custom ajsmsg78's B202 Simply international
you'll find all of them on this forum (general or android dev.)
Thanks Djiban and audio_ralf!
Progress:
I've got a successfully booting version of a not so great 703L, but that's progress. (I can boot to an OS now, so it's technically unbricked, thanks to you guys.)
Steps unbrick from scratch, based on my current understanding
To reflash from a stock image, I have to:
1. Wipe using TWRP (download + install adb, flashboot, and flash TWRP if I haven't already)
2. Download a base stock ROM (which will be an UPDATE.APP file)
3. Download extractor tool
4. Extract the IMG files from the Stock ROM
5.. Using flashboot tool, flash images (boot.img, cache.img, recovery.img, and cust.img)
About upgrades:
I also understand that there seems to be a specific upgrade route, from version to version, so I can't just install a higher level ROM from scratch, but need to install a specific "base" version first.
Like, I can't jump from an android 5.0 stock to an android 6.0-based ROM. Is that correct?
I'm currently using an almost unusable version of 703L, which says that it's on android 4.x! I don't know if that's correct.
If I wanted, for example install the KangVIP212, what base version ROM do I need to start from?
audioralf said:
So factory reset in TWRP.
Flash the recovery.img for 112
Start the external sd dload Downgrade script via 3 button press without USB connection. (Search forum for link). If successful then exchange content on external sd dload with the files for b203.
Start dload via 3 buttons.
Install TWRP
Install KangVIP 212
Click to expand...
Click to collapse
audioralf are you aware whether this path will work on a 702L model?
(*I'm able to install the 703L B009 stock ROM, but I can't get it to upgrade to 112. Probably doing something wrong.)
Is your battery still charging?
My device: Mate 9 superroot, Mediapad X2 GEM 701->703 B212 KangVIP (AJ mod)
Truly bricked ..
audioralf said:
Is your battery still charging?
Click to expand...
Click to collapse
The battery is still charging.
Unfortunately, the situation has taken a turn for the worse, I believe I have true-bricked it now. I tried loading a different stock ROM via the flashboot method, and now I can't get it to boot to a bootloader screen nor a recovery screen, normal boot hangs at the logo. It's stuck in a bootloop of death, can't power off.
1. Recovery mode takes me to the EMUI recovery screen with options:
- Reboot system
- Wipe data/factory reset
- Wipe cache partition
2. ADB is unreachable (It never boots to a reachable state)
3. Fastboot / bootloader screen is unreachable (I can't reboot to fastboot screen)
4. Three finger reboot takes me to the EMUI "install update" screen, which fails at 5%, allowing me to only reboot system.
Can't get to fastboot.
Can't flash recovery.
Can't get into adb.
I tried putting a stock 702L B005 image in the sd card dload folder, no dice.
I think it's a paperweight.
:crying:
Why did you flash 'a different stock rom', instead of that what I suggested?
Do factory reset and run that downgrade script.
My device: Mate 9 superroot, Mediapad X2 GEM 701->703 B212 KangVIP (AJ mod)
audioralf said:
Why did you flash 'a different stock rom', instead of that what I suggested?
Click to expand...
Click to collapse
Because it was not clear to me what you meant in your first response, and it didn't answer my question about how to get IMG files.
What you suggested was:
factory reset in TWRP.
Flash the recovery.img for 112
Start the external sd dload Downgrade script via 3 button press without USB connection. (Search forum for link). If successful then exchange content on external sd dload with the files for b203.
Start dload via 3 buttons.
Install TWRP
Install KangVIP 212
Click to expand...
Click to collapse
Note that in my first question I asked "I've read I'm supposed to use some IMG files (boot.img, cuts.img, etc) - where/how do I get them?"
At the time of that post, I had no idea how to extract IMG files, (hence the original question). Also did not understand what the "recovery img for 112" means, nor how to get it. Much less understand what "Start external sd dload downgrade script via 3 button press without usb" means.
Some of us are new here.
Due to Djiban's response explaining with clear steps how to extract those files, etc., I was able to get as far as extracting and flashing images. A thread on this forum (among many threads of conflicting and confusing advice, none of which are clear if they are correct or wrong) said to flash imgs for 703L, which seemed to work but looked to be incorrect for my device. However wasn't able to figure out how to get back to stock ROM, nor which one I need..
I followed up by asking a question to you about whether this path you suggested would work for my 702L device, but didn't get any response, so I more or less flashed what seemed to be (based on other posts) the correct stock ROM. Didn't work.
Currently,
I've managed to finally un-brick it again, escaped Boot loop of death, and was able to get back to stock B005. I've seen conflicting answers on the correct path to get to an android 6 ROM, and I'm not sure what correct "upgrade path" is now.
Thanks sincerely to all for the help, and will post updates here as I get there.
Sorry, but all tke guides and answers are here in our x2 forum. It does not help to repeat it. I have less time currently, so I asked you if you have still charging battery. If not, we must quickly return to 5.11, because when your battery is empty you will not be able to repair the device. This can happen if you return to b005 without downgrade script.
3 buttons press means: start the device with power and keep holding vol up and down keys.
My device: Mate 9 superroot, Mediapad X2 GEM 701->703 B212 KangVIP (AJ mod)
audioralf said:
Sorry, but all tke guides and answers are here in our x2 forum. It does not help to repeat it. I have less time currently, so I asked you if you have still charging battery. If not, we must quickly return to 5.11, because when your battery is empty you will not be able to repair the device. This can happen if you return to b005 without downgrade script.
Click to expand...
Click to collapse
Thanks, sincerely appreciate your time taken to help!
Thanks also for patience, I'm slowly figuring out terms and how to do different upgrade/downgrade methods.
Charging:
I am able to charge (I have a working copy of B005 now with downgrade script run)
Currently:
I have a working installation of B005
I have run the downgrade script, and it is charging
I can access flashboot menu and adb to flash images
I have downloaded copies of Taiwan versions of 702L stock images B003, B005, B201-202-203
I have downloaded 703L stock images B009 and B112 and Kangvip Slim B212
Question:
I now understand how to flashboot / upgrade from dload.
Which forums guide or upgrade path should I follow from here (B005 Stock) to get to an Android 6.0 ROM (stock or MOD is okay) with native Google apps (i.e. Not Chinese version which has no Google app store)?
Thanks!
Simply put B203 DEMO to dload Folder and select manual update from emui.
My device: Mate 9 superroot, Mediapad X2 GEM 701->703 B212 KangVIP (AJ mod)
audioralf said:
Simply put B203 DEMO to dload Folder and select manual update from emui.
Click to expand...
Click to collapse
The rom suggested is the very new CUST158B203_DEMO Version from Taiwan (December 12th 2016, labelled "demo") for 702 L:
http://consumer.huawei.com/tw/support/downloads/detail/index.htm?id=92804&key4=GEM-702LC158B203
Simply install it with official dload method, directly on your B005! You'll have the Huawei Taiwan's B203 Android 6 rom for 702L!
More infos:
https://forum.xda-developers.com/mediapad-x2/general/rom-b203-gem-702l-t3524889
and specifically the post #93 and the following ones
Upgraded, with a hitch
Djiban said:
Simply install it with official dload method, directly on your B005! You'll have the Huawei Taiwan's B203 Android 6 rom for 702L!
Click to expand...
Click to collapse
Thanks audiorolf and djiban:
B005 successfully upgraded to Taiwan B203 rom via sdcard dload method.
Current status:
I'm marking the thread as solved, since the device is succesfully unbricked and has a working OS.
However, the B203 upgrade still has a hitch: the phone SIM card / data seems to not be working. Did you guys hear anything about this from others who upgraded to B203?
I will continue this question on the [ROM] B203 thread
I will also post an edit to the original post with summary of de-bricking from my experience.
Thanks!
I'm looking for someone who might be able to unbrick my hard-bricked Nexus 5X. It died after a Google OS was sent through a couple days ago.
kimiwei said:
I'm looking for someone who might be able to unbrick my hard-bricked Nexus 5X. It died after a Google OS was sent through a couple days ago.
Click to expand...
Click to collapse
Can you get into download (bootloader) mode?
I was able to get into it a couple of times but since the battery did not take a charge, the phone died – and now no, I can't get into it.
kimiwei said:
I was able to get into it a couple of times but since the battery did not take a charge, the phone died – and now no, I can't get into it.
Click to expand...
Click to collapse
Maybe buy one of those cheap battery cases off ebay to get the phone working then try and enter the bootloader and do a stock rom flash. I have a friend who had the same thing happen to his 5X and it ended up being the flash memory went bad and the phone was done.
ajsmsg78 said:
Maybe buy one of those cheap battery cases off ebay to get the phone working then try and enter the bootloader and do a stock rom flash. I have a friend who had the same thing happen to his 5X and it ended up being the flash memory went bad and the phone was done.
Click to expand...
Click to collapse
What is a battery case and why will it work better than plugging the phone in to a wall charger? How do I do a stock rom flash?"
You mean the phone couldn't be resuscitated?
I have been trying to revert to stock with no luck. What I want to do is install the latest update, but I can't because I had twrp installed. I flashed the original recovery. The problem is when I try to use eRecovery I get "Getting package info failed" error. when I try to download the b385 full update for the FRD-L04 I get a dead link. I was able to download the rollback package, but will I be able to get back to the latest version after I install the rollback package? when I try to use other update packages for my phone I get "Incompatibility with current version" error. Do I need to lock my bootloader in order to update? The good news is that my phone works fine, bad news is that I can't up date.
build number: FRD-L04C567B385
Thanks
this link will help you
https://forum.xda-developers.com/honor-8/how-to/to-emui5-custom-roms-tested-openkirin-t3638445
alimir98 said:
this link will help you
https://forum.xda-developers.com/honor-8/how-to/to-emui5-custom-roms-tested-openkirin-t3638445
Click to expand...
Click to collapse
Thanks for the link, I just been to heck and back with this phone. first I uninstalled Magisk. After that my phone wouldn't boot, it would just hang on the blue screen after the initial boot screen. I tried to find a stock boot Image for my version. Once I installed that my phone would boot loop so I managed to get into fastboot and flash TWRP. Once in TWRP I restored my B360 backup and got my phone working again. Then I flashed the stock recovery. Tried to boot into the stock recovery but that wouldn't load. Some how I got it to install the rollback package and now i'm at version B300. Good news is I'm back to stock and can boot int the stock recovery. Time to see if I can update to the latest version.
Edit I think I might have a problem. It won't let me update also it shows my phone as "FRD-L04C900" not "FRD-L04C567" is there any way I can fix this?
srgrusso said:
Thanks for the link, I just been to heck and back with this phone. first I uninstalled Magisk. After that my phone wouldn't boot, it would just hang on the blue screen after the initial boot screen. I tried to find a stock boot Image for my version. Once I installed that my phone would boot loop so I managed to get into fastboot and flash TWRP. Once in TWRP I restored my B360 backup and got my phone working again. Then I flashed the stock recovery. Tried to boot into the stock recovery but that wouldn't load. Some how I got it to install the rollback package and now i'm at version B300. Good news is I'm back to stock and can boot int the stock recovery. Time to see if I can update to the latest version.
Edit I think I might have a problem. It won't let me update also it shows my phone as "FRD-L04C900" not "FRD-L04C567" is there any way I can fix this?
Click to expand...
Click to collapse
I think you will have to restore you oeminfo partition backup through twrp.
On mr FRD-L09, I had to relock my bootloader, then get the rollback package and put the .app on my SD card and hard flash it, then do the same with the rom .app file. Thet got me back to stock marshamllow, and I just let all the updates run through until I'm now on the latest.
Stock is missing some bits, and has some irritations, but the camera is sooo much better than custom roms, and GPS works, as does Android Pay etc. I've not bothered rooting, AdGuard does the ad-blocking and the rest is liveable.
Well I think I'm my phone is screwed. I can't boot into recovery and when it boots it bootloops once and then it is stuck on the "your device is unlocked and can't be trusted. Fastboot still works fine I can lock and unlock the bootloader. I can flash Recovery and TWRP in Fastboot but neither one will boot. I think I might have flashed the wrong update or it happened when I flashed the rollback package. I want to try DC Phoenix but they won't let me buy credits because my PayPal account is unverified. I have downloaded the "Honor 8_Firmware_FRD-L04_Android 6.0_EMUI 4.1_C567B122_United States_Nonspecific" from the hihonor.com site. I extracted it and flashed the recovery, boot, and system image through fastboot. The phone still won't boot into recovery or boot into the OS. Is there a way to fix this or is it time for a new phone.
Thank you everybody for your help.
Ok my phone is fixed. What I did was buy 15 credits for DC Phoenix and flashed the "Honor 8_Firmware_FRD-L04_Android 6.0_EMUI 4.1_C567B122_United States_Nonspecific" package. When I rebooted my phone it automatically went into ERecovery and downloaded and installed the B162 update. I was able to fully boot after that It updated to B360 and then B388.
Thank you everybody for your help.
srgrusso said:
Ok my phone is fixed. What I did was buy 15 credits for DC Phoenix and flashed the "Honor 8_Firmware_FRD-L04_Android 6.0_EMUI 4.1_C567B122_United States_Nonspecific" package. When I rebooted my phone it automatically went into ERecovery and downloaded and installed the B162 update. I was able to fully boot after that It updated to B360 and then B388.
Thank you everybody for your help.
Click to expand...
Click to collapse
How did you flash the file you mentioned above? Did you put it on the SD card and used TWRP?
Also, what is so special about that file?
I have the L14 (64gb US version) and just about the same exact problem you describe.
If you have any extra steps that would help me recover mine that would be great.
anosis said:
How did you flash the file you mentioned above? Did you put it on the SD card and used TWRP?
Also, what is so special about that file?
I have the L14 (64gb US version) and just about the same exact problem you describe.
If you have any extra steps that would help me recover mine that would be great.
Click to expand...
Click to collapse
Sorry for replying so late, hopefully you fixed your phone if not here is a link with some more information.
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
I followed the instuctions for the honor 7. I would recommend finding the full update firmware for your phone. It took me a lot of googling to find it. Make sure it is the correct firmware, you need to match the numbers before the B-- for me it was (FRD-L04C567) and for you it would be (FRD-L14????) I hope this helps.
hi sir
srgrusso said:
Ok my phone is fixed. What I did was buy 15 credits for DC Phoenix and flashed the "Honor 8_Firmware_FRD-L04_Android 6.0_EMUI 4.1_C567B122_United States_Nonspecific" package. When I rebooted my phone it automatically went into ERecovery and downloaded and installed the B162 update. I was able to fully boot after that It updated to B360 and then B388.
Thank you everybody for your help.
Click to expand...
Click to collapse
hi sir
I try to install "Honor 8_Firmware_FRD-L04_Android 6.0_EMUI 4.1_C567B122_United States_Nonspecific" this package in my honor 8 with dc phoenix but its not working, its flashing but its not booting, please help me.
my mobile model number is honor 8 frd-l04
sunneellkumar said:
hi sir
I try to install "Honor 8_Firmware_FRD-L04_Android 6.0_EMUI 4.1_C567B122_United States_Nonspecific" this package in my honor 8 with dc phoenix but its not working, its flashing but its not booting, please help me.
my mobile model number is honor 8 frd-l04
Click to expand...
Click to collapse
After you flash the firmware, you must format data with emui recovery, and it will boot up
After trying different methods, this one works
Download
1 .Honor 8_FRD-L04_Rollback_Package_from_Android7.0 to Android 6.0_C900B300
2. Honor_8_Firmware_FRD-L04_Android_6.0_EMUI-4.1_C567B122_United_States_Nonspecific
Put on dload (sd card) #1 after shutdown the phone and put on the folder dload (Sd card) #2. after reboot your phone starts with android 6.0
Try this
sunneellkumar said:
hi sir
I try to install "Honor 8_Firmware_FRD-L04_Android 6.0_EMUI 4.1_C567B122_United States_Nonspecific" this package in my honor 8 with dc phoenix but its not working, its flashing but its not booting, please help me.
my mobile model number is honor 8 frd-l04
Click to expand...
Click to collapse
Ok so i had the exact problem, im not sure if this will help but what I did was flash my cust recovery system and boot through bootloader, I then put the dload folder on my sdcard with the update.app in it, from there I put my phone into download mode so hold all 3 buttons until it goes into download mode. Once there it will automatically install the update.app, and you should be good to go. If not than go to recovery mode do a factory reset and wipe the cache and see if that works.