Hi everyone. Here is the problem. See, right now, I have teamwin recovery 3......sonething. 3.something. Anyways, I use darthstalker rom version 6. I want to upgrade to version 7 but....... Whoever I try to update or to even install any OS, all I get is boot loops or a galaxy logo with a red kernel message on top. It won't flash a new OS of any kind. For now my note 5 works fine on darthstalker 6 with sky kernel but I am dieing to see darthstalker 7. Any ideas luvs? When in recovery, am I supposed to mount something or unmount that's causing the trouble? I'm lost
darthstalker 6 is Lollipop, darthstalker 7 is marshmallow. you have to use a marshmallow kernel. use SkyHigh v3.4 http://forum.xda-developers.com/tmo...pment/kernel-skyhigh-mm-6-0-1-kernel-t3358982
Where's the download link luv?
I must be an idiot but I can't find the download load link to the kernel anywhere.
[email protected] said:
I must be an idiot but I can't find the download load link to the kernel anywhere.
Click to expand...
Click to collapse
You need to update to MM official first. Backup everything you need on your device. Follow the instructions in the MM Update/root thread in the general section.
Sent from my LG-D800 using Tapatalk
How do I update to mm official?
My phone isn't hooked to tmobile. I just use it as an Internet phone. It was my moms and she gave it to me. I use it on WiFi. She rooted it for me and I out on darthstalker 6 myself. I also don't have a computer anymore so whatever I dodo, I only have my recovery and whatever I can achieve in the note 5 without a PC.
[email protected] said:
My phone isn't hooked to tmobile. I just use it as an Internet phone. It was my moms and she gave it to me. I use it on WiFi. She rooted it for me and I out on darthstalker 6 myself. I also don't have a computer anymore so whatever I dodo, I only have my recovery and whatever I can achieve in the note 5 without a PC.
Click to expand...
Click to collapse
Is it an N920T? If it is, you have to update to MM first.
Sent from my LG-D800 using Tapatalk
Jammol said:
Is it an N920T? If it is, you have to update to MM first.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
Yes it's the tmobile-galaxy-note5
[email protected] said:
Yes it's the tmobile-galaxy-note5
Click to expand...
Click to collapse
Follow this guide and you'll be rooted stock with TWRP. Once done, made a backup of it just in case you need something to fall back on. You can then flash whatever MM rom you want for the T variant.
http://forum.xda-developers.com/showthread.php?t=3361990
Sent from my LG-D800 using Tapatalk
Jammol said:
Follow this guide and you'll be rooted stock with TWRP. Once done, made a backup of it just in case you need something to fall back on. You can then flash whatever MM rom you want for the T variant.
http://forum.xda-developers.com/showthread.php?t=3361990
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
I read it. I don't have a computer anymore. Any idea?
[email protected] said:
I read it. I don't have a computer anymore. Any idea?
Click to expand...
Click to collapse
That is literally your only way of getting onto MM.
Sent from my LG-D800 using Tapatalk
Related
This is a thread for I337Z users that want to go back to stock. This here is the full jumbo mumble packages.
Model: SGH-I337Z (AIO prepaid)
Firmware: TUUAMH1
Whats in included: Platform, bootloaders, modem, CSC. Each one can be flashed individually via Odin I assume.
Warning do not mess with the bootloader files or anything else if you don't know what you're doing!
Requirements!!!:
° an AIO Samsung Galaxy S4 (SGH-I337Z).
°Odin 3.07
°Samsung drivers.
Steps to go back to stock on an I337Z
1. Open Odin 3.07
2. Click on PDA slot to select the file platform I337ZTUUAMH1.
3. Put phone in download mode and connect it via USB.
4. Once you see your com port light up via Odin program click "Start".
5. Wait for Odin to successfully restore your AIO I337z back to stock!
Download link:
www.rwilco12.com/downloads.php?dir=...laxy S4 (AIO Wireless) (AIO-I337Z)/Stock ROMs
Mirror:
https://mega.co.nz/#!TAEWgLSZ!APeJ5CwrS1uhYtgCVczrezBhPBJgxCqilJlEOCvbx9k
Thanks to @DeANgelo130 for letting me use his device information to get this firmware out here on Xda.
************* Interesting facts ************
° This modem doesn't work on the ATT I337Z.
° I couldn't get ROM to boot on a I337 even with Loki or custom kernels. I will try re building zip.
Sent from my GT-I9505G using Tapatalk 2
What kinda device is an i337z . Lol. I have never heard that .
Sent from my GT-I9505 using Tapatalk 4
sky_fox said:
What kinda device is an i337z . Lol. I have never heard that .
Sent from my GT-I9505 using Tapatalk 4
Click to expand...
Click to collapse
Its a new S4 variant like the i337, i337M. Its for an att owned company named AIO wireless. Sgh-I337Z.
Sent from my GT-I9505G using Tapatalk 2
Febby said:
Its a new S4 variant like the i337, i337M. Its for an att owned company named AIO wireless. Sgh-I337Z.
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
Is there anything different about it compared to the i337?
EvanWeiler said:
Is there anything different about it compared to the i337?
Click to expand...
Click to collapse
I'm not sure. Haven't used. It's for i337z users to revert to stock or hopefully for am advanced Dev to provide a root method for them.
Sent from my GT-I9505G using Tapatalk 2
Link updated to direct fast mirror courtesy of @rwilco12!
Sent from my GT-I9505G using Tapatalk 2
EvanWeiler said:
Is there anything different about it compared to the i337?
Click to expand...
Click to collapse
Febby said:
Link updated to direct fast mirror courtesy of @rwilco12!
Sent from my GT-I9505G using Tapatalk 2
Click to expand...
Click to collapse
well, I am rooted and running a custom rom right now.thanks to @intika for the awesome Locky ROM dedicated to S4s with a locked bootloader. I did have to flash an AT&T modem to the device because wifi quit working, wouldn't even turn on, but a quick flash and BOOYA I'm rockin a totally tricked out custom ROM!
Check out the thread here...http://forum.xda-developers.com/showthread.php?t=2478691
I know this post was old, but i have an aio i337z. Its rooted and unlocked. I want to upgrade to the new kitkat. Is that possible yet, and if so is it rootable yet? thanks for any help.
jrigga said:
I know this post was old, but i have an aio i337z. Its rooted and unlocked. I want to upgrade to the new kitkat. Is that possible yet, and if so is it rootable yet? thanks for any help.
Click to expand...
Click to collapse
There is not root for 4.4 yet. I don't doubt it will be out in the next 1 or 2 months
So, has anyone upgraded this to Kit-Kat yet? I don't think we'll ever see it from AIO.
So the aio variant for sure has a locked bootloader?
Asadullah said:
So the aio variant for sure has a locked bootloader?
Click to expand...
Click to collapse
Don't know for sure. It came with MH1. Is there any way to tell that won't cause a brick?
off hand I don't know but I'm gonna look around. I'm on aio but have the at&t version I've been wanting to sell mine and get a different version.
Wow, just got a software update notice for 4.4.2. Of course I'm afraid to even try to install it. I don't want to lose root. I'm just shocked to even see it.
trillog said:
there is not root for 4.4 yet. I don't doubt it will be out in the next 1 or 2 months
Click to expand...
Click to collapse
pleaase make the modem work i need it !
---------- Post added at 12:46 AM ---------- Previous post was at 12:17 AM ----------
i really need the modem file because my phone doesnt have wifi or anything its so frustrating
OTA update
I also have an Aio Wireless I337Z , thanks to this thread i was able to restore it to stock, I was messing around with the phone with no success flashing a rom, now im back to stock and i see an OTA update, is it possible to grab the URL like people do with nexus devices usin adb logcat??
PD: i dont want to update for now, just want to get the update.zip
lnxpro91 said:
I also have an Aio Wireless I337Z , thanks to this thread i was able to restore it to stock, I was messing around with the phone with no success flashing a rom, now im back to stock and i see an OTA update, is it possible to grab the URL like people do with nexus devices usin adb logcat??
PD: i dont want to update for now, just want to get the update.zip
Click to expand...
Click to collapse
Do you have root? I know there's a way to download and grab the zip from the phone if you have root. Otherwise the other method you suggested may work.
EDIT: Root method is easier as you just download, use file manager to get it from /cache, and then you can upload it for others. I don't know which root methods do and don't work for your device however. Logcat can be done, you'll just be looking through a lot of lines of logs possibly.
Sent from my SGH-I337 running GPE
true
its true what you say, i have been trying logcat but it shows a ton of lines, and im searching for the hotword .zip or zip or update and no results give me a URL, maybe samsung is cloaking the update from logcat or they found a way to hide it, in my phone the root i know it works is kingo root, but when im rooted the phone does not let me download the update, it says "your phone has been modified, updates are not available"
lnxpro91 said:
its true what you say, i have been trying logcat but it shows a ton of lines, and im searching for the hotword .zip or zip or update and no results give me a URL, maybe samsung is cloaking the update from logcat or they found a way to hide it, in my phone the root i know it works is kingo root, but when im rooted the phone does not let me download the update, it says "your phone has been modified, updates are not available"
Click to expand...
Click to collapse
Try installing Xposed Framework and Wanam Xposed, and use the fake Official system status option. I think that might fix it but I don't remember all it checks.
I'm currently running Hyperdrive RLS 16 and want to know if it is possible to go to [Rom][d2vzw][Official][Kitkat - 4.4.2] - Gummy - Nightly's?
Do I just need to follow the instructions or is there more files I need to change within the phone? Basically, I want to know if it will be a simple transition.
Thank You!
:crying:
You should be just fine. Just install like any other ROMs. Don't forget to wipe Data. Make sure you update your recovery to the latest version first BEFORE FLASHING since gummy is Kitkat. This is very important.
Sent from my SCH-I535 using Tapatalk
Cool thanks a ton!
GlitchMob said:
Cool thanks a ton!
Click to expand...
Click to collapse
There are so many people saying different things. Im on 2.4.4.0 is that okay?
GlitchMob said:
There are so many people saying different things. Im on 2.4.4.0 is that okay?
Click to expand...
Click to collapse
2.4..3.1 is the latest for Verizon S3, where did you get TWRP 2.4.4.0 from? That said, KitKat works on TWRP 2.4.3.1 definitely, I'm using it now for SlimKat.
Sent from my SCH-I535 using Tapatalk 4
SlimSnoopOS said:
2.4..3.1 is the latest for Verizon S3, where did you get TWRP 2.4.4.0 from? That said, KitKat works on TWRP 2.4.3.1 definitely, I'm using it now for SlimKat.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
lol no idea. I dont remember its been a while. When I load twrp that is what I see at the top.
GlitchMob said:
lol no idea. I dont remember its been a while. When I load twrp that is what I see at the top.
Click to expand...
Click to collapse
I'm mistaken...badly. You need to be on TWRP 2.6.3.1 in order to flash any KitKat rom. That's what I'm on. KitKat roms will not flash on anything before TWRP 2.6.3.1.
Sent from my SCH-I535 using Tapatalk 4
Yes TWRP 2.6.3.1 is required to flash any KitKat ROM. If you use anything prior you could actually screw up your partituons
Sent from my SCH-I535 using Tapatalk
Sandman-007 said:
Yes TWRP 2.6.3.1 is required to flash any KitKat ROM. If you use anything prior you could actually screw up your partituons
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Ya I found the latest twrp and installed Gummy. What I want to know is if I want to update to a different nightly do I have to wipe everything and start over?
Sandman-007 said:
Yes TWRP 2.6.3.1 is required to flash any KitKat ROM. If you use anything prior you could actually screw up your partituons
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
What about CWM can i use that and if so which ver.?
razorr69 said:
What about CWM can i use that and if so which ver.?
Click to expand...
Click to collapse
Yes, the latest is up on the Rom Manager website.
Sent from my SCH-I535 using Tapatalk 4
Funny I had the same question..
I was going to pose the same question.. Ironically I'm on Hyperdrive RLS 16 also and am either going to the last carbon nightly or maybe something 4.4 ?
My question was do I need to flash the MF1 firmware, but I guess not ?
I loved carbon when I used it before ( last was v 1.7 stable ) but had to flash to stock/TW base to flash my phone to PagePlus and TW is waaaay to clunky for me I can't stand it anymore !!
Edit: Would the new PhilZ work for a KitKat rom ? the new official one ?
cjmcsw87 said:
I was going to pose the same question.. Ironically I'm on Hyperdrive RLS 16 also and am either going to the last carbon nightly or maybe something 4.4 ?
My question was do I need to flash the MF1 firmware, but I guess not ?
I loved carbon when I used it before ( last was v 1.7 stable ) but had to flash to stock/TW base to flash my phone to PagePlus and TW is waaaay to clunky for me I can't stand it anymore !!
Edit: Would the new PhilZ work for a KitKat rom ? the new official one ?
Click to expand...
Click to collapse
You do need the VRBMF1 firmware installed. You do not need the VRUCML1 firmware installed. PhilZ recovery should work, idk firsthand cuz I use TWRP.
Sent from my SCH-I535 using Tapatalk 4
SlimSnoopOS said:
You do need the VRBMF1 firmware installed. You do not need the VRUCML1 firmware installed. PhilZ recovery should work, idk firsthand cuz I use TWRP.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
Ok cool thanks snoop, as always you da man ! I'm still on MB1 so I kind of thought so. I Guess I'll give it a whirl after a few and post my results (from philZ)
GlitchMob said:
Ya I found the latest twrp and installed Gummy. What I want to know is if I want to update to a different nightly do I have to wipe everything and start over?
Click to expand...
Click to collapse
Clean flashing is recommended if you don't want to have any issues.
But you're free to dirty flash over an existing nightly if you don't want to clean flash. However, any issues you get are your own issues and should not be reported in the Gummy thread.
david_hume said:
Clean flashing is recommended if you don't want to have any issues.
But you're free to dirty flash over an existing nightly if you don't want to clean flash. However, any issues you get are your own issues and should not be reported in the Gummy thread.
Click to expand...
Click to collapse
That kind of sucks. I'll probably just stick with the most current nightly till they come out with an official one.
Thanks for the response.
SlimSnoopOS said:
You do need the VRBMF1 firmware installed. You do not need the VRUCML1 firmware installed. PhilZ recovery should work, idk firsthand cuz I use TWRP.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
Sorry for the newb ? but where do i look to see what firmware i'm running i havent flashed since synergy which im still running?
Thanks
razorr69 said:
Sorry for the newb ? but where do i look to see what firmware i'm running i havent flashed since synergy which im still running?
Thanks
Click to expand...
Click to collapse
Don't apologize, we all start somewhere. Look in Settings/About Phone/Baseband.
Sent from my SCH-I535 using Tapatalk 4
SlimSnoopOS said:
Don't apologize, we all start somewhere. Look in Settings/About Phone/Baseband.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
Thats what i thought but wasn't %100 sure because mine is VRLHE. Should i flash it anyway to M1 modem only will i get better speeds and is the radio better. Eventually im going to flash 4.3 or 4.4 just waiting for a daily driver.
i need to go back
yes you can. simply flash any custom rom u like..
Did you find any issues in MM?
Don't do it. First of all check if the bootloader got updated. Newer bootloader won't accept 5.1.1. If you updated via OTA you can't go back. Only option is CM13.
Sent from my MotoG3 using Tapatalk
I did the samething what I had to do is intall twrp download the lasted 5.1.1 lollipop I got mine from PAC ROM the surnia oh yeah dont for get gapps I get the mini but its what you want and that's the fastest way and safest way. Hope that helps
isawyouseeme said:
i need to go back
Click to expand...
Click to collapse
Why?
Sent from my MotoG3 using Tapatalk
Biggdaddy S6/S6Edge 7.0 Aroma Rom
All Information and instructions follow this thread. Download is live and Ready.....
https://forum.xda-developers.com/showthread.php?t=3603181
Sent from my SM-G925P using XDA-Developers Legacy app
Thanks for this. I'm still on renegade. So glad to have a 7.0 rom for my edge. I guess I've got some studying to do as it's been almost 2 years since I originally rooted my phone. Now to re-learn how to Odin to 7, re-root, and get twrp going again.
Sent from my SM-G925P using Tapatalk
baknblack said:
Thanks for this. I'm still on renegade. So glad to have a 7.0 rom for my edge. I guess I've got some studying to do as it's been almost 2 years since I originally rooted my phone. Now to re-learn how to Odin to 7, re-root, and get twrp going again.
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
If you go to S6 forum we will give you all the support you need. @koop1955 will shed the light for you to get you. Started.
Sent from my SM-G925P using XDA-Developers Legacy app
Thanks, @amieldl143, for the shout out. @baknblack, this should have all that you need: https://forum.xda-developers.com/sp...uide-links-files-update-root-restore-t3366862
Flash the TAR file with Odin (there is a how-to video), then root and TWRP and flash this great ROM. Enjoy!
baknblack said:
Thanks for this. I'm still on renegade. So glad to have a 7.0 rom for my edge. I guess I've got some studying to do as it's been almost 2 years since I originally rooted my phone. Now to re-learn how to Odin to 7, re-root, and get twrp going again.
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
You just need to download qc7 tar file for edge.
Sent from my SM-G925P using XDA-Developers Legacy app
I got it guys. Thanks so much. I'm still playing around and trying to figure it out. The only hiccup I had was it didn't flash the first go round. Second time did the trick. Now to figure out this magisk stuff! Lol.
Sent from my SM-G925P using Tapatalk
baknblack said:
I got it guys. Thanks so much. I'm still playing around and trying to figure it out. The only hiccup I had was it didn't flash the first go round. Second time did the trick. Now to figure out this magisk stuff! Lol.
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
Let me know once you update to my rom if you have issues with fingerprint lock or pin lovk. Thamks...
Sent from my SM-G925P using XDA-Developers Legacy app
amieldl143 said:
Let me know once you update to my rom if you have issues with fingerprint lock or pin lovk. Thamks...
Sent from my SM-G925P using XDA-Developers Legacy app
Click to expand...
Click to collapse
Pattern and pin both work ok. Never use password. The only thing I I've found so far is trying to click on Samsung cloud in settings causes it to report that it's closed. It seems to be working though since I logged into shealth. It just force closes from the settings menu.
Sent from my SM-G925P using Tapatalk
baknblack said:
Pattern and pin both work ok. Never use password. The only thing I I've found so far is trying to click on Samsung cloud in settings causes it to report that it's closed. It seems to be working though since I logged into shealth. It just force closes from the settings menu.
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
You have to update samsung cloud in samsung app store and should be success.[emoji1]
Sent from my SM-G925P using XDA-Developers Legacy app
FINALLY!! Someone came back to us Sprint S6/Edge owners!! I will go and try this soon ^^
NovaViper said:
FINALLY!! Someone came back to us Sprint S6/Edge owners!! I will go and try this soon ^^
Click to expand...
Click to collapse
It's pretty awesome! I'm sure more people will find out. I was still checking the forum once every 2 or 3 weeks and hoping. I always run without a contract so I have to wait on phones till the price gets resonable.
Sent from my SM-G925P using Tapatalk
baknblack said:
It's pretty awesome! I'm sure more people will find out. I was still checking the forum once every 2 or 3 weeks and hoping. I always run without a contract so I have to wait on phones till the price gets resonable.
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
The only sad thing now is that I may end up switching carriers and phones so I won't be able to try out the rom :crying:
baknblack said:
I got it guys. Thanks so much. I'm still playing around and trying to figure it out. The only hiccup I had was it didn't flash the first go round. Second time did the trick. Now to figure out this magisk stuff! Lol.
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
Did you have any trouble other than having to retry? I keep just getting "SECURE CHECK FAIL : (BOOTLOADER)"
phantomv48 said:
Did you have any trouble other than having to retry? I keep just getting "SECURE CHECK FAIL : (BOOTLOADER)"
Click to expand...
Click to collapse
You got developer mode enabled and oem unlock on?
Sent from my SM-G925P using Tapatalk
baknblack said:
You got developer mode enabled and oem unlock on?
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
Sure do. Tried the QE2 and QC7 files in @koop1955 's big post, but both get the same error. I imagine because I'm on S6 Edge, not just S6?
Although, now it looks like he's working on a new rooting method, so maybe I should hang back a bit for now anyway.
phantomv48 said:
Sure do. Tried the QE2 and QC7 files in @koop1955 's big post, but both get the same error. I imagine because I'm on S6 Edge, not just S6?
Although, now it looks like he's working on a new rooting method, so maybe I should hang back a bit for now anyway.
Click to expand...
Click to collapse
I'm running an edge and it runs fine on mine.
Sent from my SM-G925P using Tapatalk
First of all, thanks for keeping this fone alive. Quick question: I'm currently on QH1, will this work? Just trying to cover my bases before I try anything...
koop1955 said:
Thanks, @amieldl143, for the shout out. @baknblack, this should have all that you need: https://forum.xda-developers.com/sp...uide-links-files-update-root-restore-t3366862
Flash the TAR file with Odin (there is a how-to video), then root and TWRP and flash this great ROM. Enjoy!
Click to expand...
Click to collapse
Thanks for this, very helpful. I'm in a similar state from the guy above, currently running Renegade OJ7 v1, my kernel is 3.10.61-S6_UniKernel_v9-0000_beta, baseband version G925PVPU3BOJ7 and TWRP 2.8.7.0 with the most recent version of SuperSU.
My question is: should I bother with updating the kernel as well as flashing the TAR you linked to, or is just the TAR good enough? After that, should I mess with TWRP or leave it alone? Once I get that done, if I'm looking for a clean slate, should I just wipe all partitions and flash the ROM? If you can answer any/all of these it would be hugely helpful for a guy who doesn't do that much flashing and can't swing $800 on the new S8 right now.
Thank you!
Oculi said:
Thanks for this, very helpful. I'm in a similar state from the guy above, currently running Renegade OJ7 v1, my kernel is 3.10.61-S6_UniKernel_v9-0000_beta, baseband version G925PVPU3BOJ7 and TWRP 2.8.7.0 with the most recent version of SuperSU.
My question is: should I bother with updating the kernel as well as flashing the TAR you linked to, or is just the TAR good enough? After that, should I mess with TWRP or leave it alone? Once I get that done, if I'm looking for a clean slate, should I just wipe all partitions and flash the ROM? If you can answer any/all of these it would be hugely helpful for a guy who doesn't do that much flashing and can't swing $800 on the new S8 right now.
Thank you!
Click to expand...
Click to collapse
I still have my edge and am running this. All I can tell you is you have to update to nougat first (flash the tar I think). It's been a long time since I did it. Once my phone was updated to the new firmware I then installed twrp and flashed the rom. That's about all I can remember. In my case it got hung in a boot loop and I had to flash a second time. Sorry I couldn't be of more help.
Sent from my SM-G925P using Tapatalk
baknblack said:
I still have my edge and am running this. All I can tell you is you have to update to nougat first (flash the tar I think). It's been a long time since I did it. Once my phone was updated to the new firmware I then installed twrp and flashed the rom. That's about all I can remember. In my case it got hung in a boot loop and I had to flash a second time. Sorry I couldn't be of more help.
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
Any chance you can let me know which kernel you're running? I get a lot of lockscreen crashing on my existing one and wondering if there isn't a better one available.
edit: looked and realized there's a kernel included in the zip, my bad! thanks again!
Alright so I'm gonna get straight to it. I bricked my phone. Took it to the tmobile store to try and get them to fix it (probably a mistake). A guy there flashed a galaxy s7 edge rom for my phone and now the camera doesn't work. I've been dealing with it for a while now but it's seriously annoying. Is there any way for me to restore my camera? The device restarts when I open the camera.
Sorry to ask the obvious - is your fon an S7e?
I would start with flashing the latest stock rom using Odin.
Sent from my SM-J700M using Tapatalk
dodo2244 said:
Sorry to ask the obvious - is your fon an S7e?
I would start with flashing the latest stock rom using Odin.
Click to expand...
Click to collapse
Nope, it's a galaxy j7 actually. SM-J700T to be specific
Another one - what is stopping you from flashing a stock rom?
Sent from my SM-J700M using Tapatalk
dodo2244 said:
Another one - what is stopping you from flashing a stock rom?
Click to expand...
Click to collapse
My ignorance pretty much. The first time I bricked my phone I THOUGHT I knew what I was doing. If someone could possibly link me to some very specific directions that would be cool. I just don't wanna deal with that again.
Go here https://forum.xda-developers.com/showthread.php?t=3696306
Follow steps 1 to 7.
At step 7 flash the stock rom NOT Twrp
Get the stock rom fon here www.updato.com
Sent from my SM-J700M using Tapatalk
dodo2244 said:
Go here https://forum.xda-developers.com/showthread.php?t=3696306
Follow steps 1 to 7.
At step 7 flash the stock rom NOT Twrp
Get the stock rom fon here www.updato.com
Click to expand...
Click to collapse
Alright, I'm gonna try this. I appreciate the help!