Related
I accidentally used 5.0.2 root on my 5.1.1 t-mobile s6 and it got the "RECOVERY IS NOT SEANDROID ENFORCING"
So I tried to re-root by using the 5.1.1 version and it still got the same error. Stupid, I know
I did some google search and I found out that I need to flash to stock firmware, so I tried.
And it have new problem: SW REV CHECK FAIL DEVICE 3 BINARY 2
Please help. I just got this phone for a month.
This is the log of ODIN (3.10)
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1005)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
You should flash twrp recovery in order to get out of the bootloop. Google "Download TWRP for zeroflte", click on the first result, then download with the extension .tar so you can flash it in odin. Once downloaded, put your phone into download mode, connect it on computer, run odin and put the downloaded twrp recovery on AP. Flash it and the phone should finish booting up
CloseCoder said:
You should flash twrp recovery in order to get out of the bootloop. Google "Download TWRP for zeroflte", click on the first result, then download with the extension .tar so you can flash it in odin. Once downloaded, put your phone into download mode, connect it on computer, run odin and put the downloaded twrp recovery on AP. Flash it and the phone should finish booting up
Click to expand...
Click to collapse
It does not show the "RECOVERY IS NOT SEANDROID ENFORCING" anymore but it still stuck at the samsung logo
I tried to flash it back to stock android but still get the "Sw rev check fail device 3 binary 2"
sboot fail mean BOOTLOADER FAIL ....download latest firmware build for you device from sammobile and flash ...
PM me and I can send you the latest bootloader only, it will be updated to OI1 though
Sent from my SM-G920T
CloseCoder said:
You should flash twrp recovery in order to get out of the bootloop. Google "Download TWRP for zeroflte", click on the first result, then download with the extension .tar so you can flash it in odin. Once downloaded, put your phone into download mode, connect it on computer, run odin and put the downloaded twrp recovery on AP. Flash it and the phone should finish booting up
Click to expand...
Click to collapse
CloseCoder said:
PM me and I can send you the latest bootloader only, it will be updated to OI1 though
Sent from my SM-G920T
Click to expand...
Click to collapse
lummujaj said:
sboot fail mean BOOTLOADER FAIL ....download latest firmware build for you device from sammobile and flash ...
Click to expand...
Click to collapse
Thanks very much, I fix my phone by flashing TWRP and used ADB to transfer a custom rom over from my pc to the 6. I flashed the rom and it is working fine now.
help pls got the same problem
nguye205 said:
Thanks very much, I fix my phone by flashing TWRP and used ADB to transfer a custom rom over from my pc to the 6. I flashed the rom and it is working fine now.
Click to expand...
Click to collapse
I don't know how to to transfer a custom rom over from my pc using ADB.
I can go only into download mode and not recovery.
I tried flashing with odin TWRP and wasn't able to remove "RECOVERY IS NOT SEANDROID ENFORCING"" but after using a recovery "frecovery.tar.md5" it got removed , and now stuck at the loop can't turn it on and it will not go into recovery mode . PLSS help
BL
CloseCoder said:
PM me and I can send you the latest bootloader only, it will be updated to OI1 though
Sent from my SM-G920T
Click to expand...
Click to collapse
Could you plz email me the BL file? [email protected] . And im not sure if its firmware specific, can i flash the oi1 BL on oi6? and just to make sure are we talking the G920T model?
NotTheDroidsUrLooking4 said:
Could you plz email me the BL file? [email protected] . And im not sure if its firmware specific, can i flash the oi1 BL on oi6? and just to make sure are we talking the G920T model?
Click to expand...
Click to collapse
hi i have a s6 sm-g925i and not flash always same error sw rev check fail device 3 binary 2
sunnyce said:
I don't know how to to transfer a custom rom over from my pc using ADB.
I can go only into download mode and not recovery.
I tried flashing with odin TWRP and wasn't able to remove "RECOVERY IS NOT SEANDROID ENFORCING"" but after using a recovery "frecovery.tar.md5" it got removed , and now stuck at the loop can't turn it on and it will not go into recovery mode . PLSS help
Click to expand...
Click to collapse
Did you find a solution?! I have the exact same problem
nguye205 said:
And it have new problem: SW REV CHECK FAIL DEVICE 3 BINARY 2
Please help. I just got this phone for a month.
Click to expand...
Click to collapse
Did you fix it?
I guess I'm fixing it now. I tried to flash 4-file firmware separately.
First: I downloaded and installed this TWRP zeroflte
BUT you can begin with -
Second: I flashed ONLY BOOTLOADER of this 4-file service firmware I9500XXUFNB3 (Unfortunatelly I cannot write down outside links of this file, because of I'm new user and system didn't allow me, but you can Google it and download from 4pda).
Third: I flashed ONLY AP
Fourth: I flashed CP (Modem)
Fifth: Last one CSC
FIRST START!...
CloseCoder said:
PM me and I can send you the latest bootloader only, it will be updated to OI1 though
Sent from my SM-G920T
Click to expand...
Click to collapse
hope you can help but i have verixon s6 and its stuck also on bootloop w that binary device message ive wiped cache factory reset and everything ive tried flash stock firmware thur odin everything i try Failed odin mode on top of download mode and not sure what i can do to get it to boot up. i dont care about wiping it all since its new anyway.
any help greatly appreciated/
ToY9CiTo said:
hope you can help but i have verixon s6 and its stuck also on bootloop w that binary device message ive wiped cache factory reset and everything ive tried flash stock firmware thur odin everything i try Failed odin mode on top of download mode and not sure what i can do to get it to boot up. i dont care about wiping it all since its new anyway.
any help greatly appreciated/
Click to expand...
Click to collapse
Hello did u get this fixed ?
i am facing the same issue
i d really appreciate if u update ur solution here
thanks
After installing twrp my phone is not showing IMEI and baseband. So sim card also not working. Using custom rom but still the same.
faurionutz said:
Flash back stock rom, if still no imei or baseband you must repair imei and baseband, contact me if you need this
Click to expand...
Click to collapse
Now stock rom also not working. I have tried to install many roms which used to work fine before installing twrp now they are giving error. I managed to install just 1 rom but Network and baseband is empty. I have no clue.
Can u sant me the bootloader pls? [email protected]
Help
CloseCoder said:
PM me and I can send you the latest bootloader only, it will be updated to OI1 though
Sent from my SM-G920T
Click to expand...
Click to collapse
Can u plz send me the bootloader [email protected]
im getting the same problem i try to use twrp and flash and i get:
<ID:0/013> Odin engine v(ID:3.1101)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> SingleDownload.
<ID:0/013> recovery.img
<ID:0/013> NAND Write Start!!
<ID:0/013> RQT_CLOSE !!
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help phone is still very new
stonytony666 said:
im getting the same problem i try to use twrp and flash and i get:
<ID:0/013> Odin engine v(ID:3.1101)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> SingleDownload.
<ID:0/013> recovery.img
<ID:0/013> NAND Write Start!!
<ID:0/013> RQT_CLOSE !!
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help phone is still very new
Click to expand...
Click to collapse
Try this recovery mate
xfury94 said:
Try this recovery mate
Click to expand...
Click to collapse
this is what i get after trying your recovery:
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin engine v(ID:3.1101)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> SingleDownload.
<ID:0/013> recovery.img
<ID:0/013> NAND Write Start!!
<ID:0/013> RQT_CLOSE !!
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Hi All,
I was using the SM-N915A as normal...then i left it idle for a while and came back saw it kept resetting itself. I tried clear cache partition already didnt' work. It keeps looping on startup after the samsung logo. It got worst as time went on, it wont even load into recovery anymore, it just loads with the android icon saying it's updating then freezes and restarts....I read that I can manual recover using Odin. I used odin and a stock rom to fix it, but the rom failed now i am bricked. Please help.
Odin3 v3.10.7
Stock Rom: AP_N915AUCU1BOC6_CL4376893_QB4361884_REV00_user_low_ship_MULTI_CERT.tar
Log
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
At this point i am bricked..."the phone just says firmware upgrade encountered an issue please recover mode in Kies and try again" Kies/SS doesn't work, when i plug in this phone, it doesn't recognize it.
What can I do now?
pubtemp said:
Hi All,
I was using the SM-N915A as normal...then i left it idle for a while and came back saw it kept resetting itself. I tried clear cache partition already didnt' work. It keeps looping on startup after the samsung logo. It got worst as time went on, it wont even load into recovery anymore, it just loads with the android icon saying it's updating then freezes and restarts....I read that I can manual recover using Odin. I used odin and a stock rom to fix it, but the rom failed now i am bricked. Please help.
Odin3 v3.10.7
Stock Rom: AP_N915AUCU1BOC6_CL4376893_QB4361884_REV00_user_low_ship_MULTI_CERT.tar
Log
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
At this point i am bricked..."the phone just says firmware upgrade encountered an issue please recover mode in Kies and try again" Kies/SS doesn't work, when i plug in this phone, it doesn't recognize it.
What can I do now?
Click to expand...
Click to collapse
Get md5 tar file & make sure your in download mode connect phone to Odin and try again
pit file with Odin 3.07 0 3.09 single and tell me how it went
pubtemp said:
Hi All,
I was using the SM-N915A as normal...then i left it idle for a while and came back saw it kept resetting itself. I tried clear cache partition already didnt' work. It keeps looping on startup after the samsung logo. It got worst as time went on, it wont even load into recovery anymore, it just loads with the android icon saying it's updating then freezes and restarts....I read that I can manual recover using Odin. I used odin and a stock rom to fix it, but the rom failed now i am bricked. Please help.
Odin3 v3.10.7
Stock Rom: AP_N915AUCU1BOC6_CL4376893_QB4361884_REV00_user_low_ship_MULTI_CERT.tar
Log
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
At this point i am bricked..."the phone just says firmware upgrade encountered an issue please recover mode in Kies and try again" Kies/SS doesn't work, when i plug in this phone, it doesn't recognize it.
What can I do now?
Click to expand...
Click to collapse
ltindi32 said:
pit file with Odin 3.07 0 3.09 single and tell me how it went
Click to expand...
Click to collapse
Thanks, I managed to use the pit file and it got pass the brick page.
However, now the system goes into the Samsung Galaxy Note Edge loading screen and just stays there for a very long time and then restarts itself again....I pulled the battery out to manual shutdown (power button will not shut it down) and tried to go into recovery mode, it says loading recovery, but ends up restarting back to the Samsung loading screen indefinitely again. I would assume that's because the rom is dead at this point, and I would need to go to dl mode and flash a new stock rom back in ? What is my next step ?
pubtemp said:
Thanks, I managed to use the pit file and it got pass the brick page.
However, now the system goes into the Samsung Galaxy Note Edge loading screen and just stays there for a very long time and then restarts itself again....I pulled the battery out to manual shutdown (power button will not shut it down) and tried to go into recovery mode, it says loading recovery, but ends up restarting back to the Samsung loading screen indefinitely again. I would assume that's because the rom is dead at this point, and I would need to go to dl mode and flash a new stock rom back in ? What is my next step ?
Click to expand...
Click to collapse
I will upload the stock n915a cu2co2 5.1.1 for mega t pass the link to try with that
ltindi32 said:
I will upload the stock n915a cu2co2 5.1.1 for mega t pass the link to try with that
Click to expand...
Click to collapse
is this filmware with Odin3_v3.10.7. chek mark nand flash erase ALL_ATT_N915AUCU2COI2_N915AATT2COI2_CL5613658_QB6196305_REV00_user_low_ship_MULTI_CERT.tar.md5 enter the recovery mode and give him a factory resset and clear cache and comment. I improved my with this procedure. download it from herehttps://mega.nz/#!Ax5zEShb
ltindi32 said:
is this filmware with Odin3_v3.10.7. chek mark nand flash erase ALL_ATT_N915AUCU2COI2_N915AATT2COI2_CL5613658_QB6196305_REV00_user_low_ship_MULTI_CERT.tar.md5 enter the recovery mode and give him a factory resset and clear cache and comment. I improved my with this procedure. download it from herehttps://mega.nz/#!Ax5zEShb
Click to expand...
Click to collapse
It says I need the decryption key in order to dl the file.
pubtemp said:
It says I need the decryption key in order to dl the file.
Click to expand...
Click to collapse
!bawMPPRshf_1tFt1xeqtXh1a9zP1ow5KkRYaJlhXWf8
Hey guys, i have 1:1 the same problem with my n915fy. It dont boot and when i try to get in recovery it just stuck on booting recovery.
Have anyone the files for me too? I bought the phone Bricked.
Edit: Things I already tried:
Installed stock 5.1.1 per odin
Installed 5.1.1 per odin while checked the mark Nand earse all
Installed 4.4.4 per odin
Installed CWM per odin
Still stuck on Samsung Galaxy booting logo, when i try to go in Recovery menu its calls: " Recover booting" but just restart after one minute.
Hope someone can help me...
Btw where can i get pitfiles and would it help when i patch one?
pubtemp said:
Thanks, I managed to use the pit file and it got pass the brick page.
However, now the system goes into the Samsung Galaxy Note Edge loading screen and just stays there for a very long time and then restarts itself again....I pulled the battery out to manual shutdown (power button will not shut it down) and tried to go into recovery mode, it says loading recovery, but ends up restarting back to the Samsung loading screen indefinitely again. I would assume that's because the rom is dead at this point, and I would need to go to dl mode and flash a new stock rom back in ? What is my next step ?
Click to expand...
Click to collapse
You know what, try to clean power button. It may sticks. Pull battery and put small drop of rubbing alcohol. Then press couple times ( with out battery). Let dry for 10 min( you may use hair dryer on low power) . Put battery back and let us know.
Sent from my SAMSUNG-SM-N920A using XDA Premium HD app
Hey, i having the same problem, i was wondering if someone could make a step by step guide on how to fix it. also mine says mmc: mmc_write fail.
When i did Nand erase it says
mmc: mmc_read fail
ERASING USERDATA PARTITION
My SM-N915A went full dead on incomplete upgrade. Tried everything possible no lights, no vibration, no nothing: fill dear brick.
Was told its emmc corrupt.
Kindly help
can't you use samsung kies?
Hi to all. I was trying to recover some files with DrFone when it tried to root my phone. The rooting process failed and the phone bricked. If I try to power it on, it appears the writing "firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
Obviously kies can't connect to the phone.
If I press pwr+vol_dn+home and then select "volume up" the phone goes in download mode but doesn't accept the reset of drfone, the download process freeze at half...
What can I do?
Thanks in advance!
try flashing only pitt file
is there anyone that does this upload , reload repair for others. are is there instructions to follow somewhere?
ltindi32 said:
pit file with Odin 3.07 0 3.09 single and tell me how it went
Click to expand...
Click to collapse
thanks for the pit file,saved my n915a after encountering "DRK error" after the 6.0.1 update. Cheers
I used CF Auto root to root my device with Odin 3.10.6. Afterwards my device would just boot to the logo and stop their. I have tried everything I could find online. I tried stock firmware with all versions of Odin I could get my hands on, I tried flashing a custom ROM with Odin, I tried Keis and Smart but no luck there either. I also went in store to AT&T and they could do nothing either except offer me a new phone for 800 bucks lol. I have followed many online tutorials also from various websites.
My phone is SM G925A. I need answers badly. Any help is much appreciated.
Odin spits this out at me every try or else it gets stuck on a segment and never continues the flash:
<ID:0/011> File analysis ..
<ID:0/011> SetupConnection ..
<ID:0/011> Initialzation ..
<ID:0/011> Get PIT for mapping ..
<ID:0/011> Firmware update start ..
<ID:0/011> SingleDownload.
<ID:0/011> sboot.bin
<ID:0/011> NAND Write Start!
<ID:0/011> FAIL!
<ID:0/011>
<ID:0/011> Complete (Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Hello,
I tried to update my wife's Samsung S7 firmware using Odin and managed to brick/boot loop it.
I need some help getting it working again.
Its an unlocked T-Mobile Samsung S7 (SM-G30T) from Ebay using a Virgin Mobile SIM and it originally had the G930TUVU4APK1 (Android 6.0.1) firmware on it.
It would not update OTA, so I downloaded the G930TUVS8CRJ1 (Android 8.0) from Sammmobile.com.
I opened Odin, selected the BL, AP, CP and CSC files and hit Start. The Odin log said "failed (auth)".
I exited Download Mode and tried to restart the phone, it would try to boot but it gave me the message "security error: this phone has been flashed with unauthorized software and is locked".
I downloaded and tried to flash the older G930TUVU4APK1 (Android 6.0.1) firmware, but it did not work.
I am able to get back into Download Mode and Odin still recognizes the phone. I think its possible to save it?
I should have never tried to do this, I feel terrible and I need some help. How can I fix this? Where can I find firmware that I can flash to fix this?
I would really appreciate your help! Thank you very much!!
I just tried to flash the older Android 6.0.1 firmware again. This time selecting only AP, CP and CSC.
This is what the Odin log says.
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 4661 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Something I noticed. Before I tried to update it, on the Download Mode screen, it said "Current Binary: Official".
Now it says "Current Binary: Custom". I think I need to get that to say "Official" again.
I would suggest that you download the firmware again and then try flashing it.....
As far as that custom binary thing is concerned.... That's not going to change as far as i know cause that tripped the knox.... And the warranty is lost... If it was there ..... So i hope u recover it again.... Also try getting into the recovery mode and format before flashing the firmware.... That might help.....
Let me know what happens....
All the best
Thanks for the help soyuz4u!
After spending a long night trying various things,
I was finally able to fix it by flashing the G930TUVS8CRJ1 (Android 8.0) firmware again using Odin. Except this time I used the "CSC..." file, instead of the "HOME_CSC..." file.
Originally I was trying to preserve the data on the phone, so thats why I used the Home file. However, after struggling for a while I eventually gave up hope and decided try it again, this time wiping everything out with the CSC file... and to my delight, it worked! Thank goodness! Its working perfectly on an official firmware!
Just as an FYI, USA model S7's can't be downgraded via Odin, so once you're on Oreo your only option to resolve issues would be to flash Oreo.
i doubt there is working stock firmware for android 6.0.X. I have tried several stock firmwares they all fail.
EDIT: POST SOLVED I don't know why but samsung recovery appear to me for the first time and after a wipe factory reset the phone boot!
Hi all, my mother's phone where stuck in bootloop during a system update, and now I'm trying to fix it. First thing I've tried was to flash a new firmware via Odin but problem still remains and after flash a system update give an error and bootloop again and again. I've tried to flash a custom recovery for wipe all data partitions following this post's instruction but Odin give me this error
Code:
<ID:0/006> Firmware update start..
<ID:0/006> NAND Write Start!!
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> RQT_CLOSE !!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
And on Odin mode in the phone screen is write this: Custom Binary(RECOVERY) Blocked by FAP Lock
Whats can I do?
Thanks so much in advance