Hi guys,
as it has been almost a week I am trying to fix my phone, I am running out of ideas and asking you for help !
As I mentioned about a week ago without a reason my phone has shut down ( it was used as a gps on google maps and was a bit hot).
Since the it was stuck on on huawei logo and restart over and over(boot loop).
I started with factory data and reset, which went smothly i guess(it has changed language to Chinese) but didn't help to start the phone.
I have tried then to flash stock rom( tried 3 i have found ) from memory card in dload folder. Phone will only start updating when usb cable is in - without it wont, and keep flashing logo and restart.
Unfortunately none of the roms installed properly, all hang up on nearly end(98-99) %.
I tried to follow procedure then with Honor Multi Tool - after extracting images BOOT, CUST, RECOVERY, SYSTEM tried to upload them to my phone, but cannot write anything on the phone, which brought me to FASTBOOT& RESCUE MODE, which I am able to turn on, but it says my phone is LOCKED and until is unlocked I am stuck...
I went to HUAWEI website to apply for unlocking code, but among IMEI and SN there is also needed Product ID which you can obtain by sending a code in your phone. since I cannot turn my phone on, I cannot get my Product ID...
I have emailed huawei regarding this, but without luck.
The battery is fine and charging to 100%.
Android 4.4 with Emotion UI 2.3.
Can anyone please HELP..!!!
Follow this procedure to flash official Stock firmware package:
Download your phone firmware on which you were previously on.
Boot into bootloader mode by switching off the phone then pressing only the Vol DOWN button, and connecting it to PC simultaneously.
After doing this put the UPDATE.APP in dload folder of your external SDCARD.
Switch off your phone, and press Vol UP + Vol DOWN + Power button simultaneously.
Your device will now get to the full stock firmware.
Related
Hello everyone,
i have a problem with a Honor 6 from a friend. The phone has an Unlocked bootloader and was rooted.
Then my friend received an Update Notification on the phone and he has done that update. I have said before, that this won't work and it will brick your phone. But i don't know why, he made the Update.
Since then the Phone stucks on bootloader with the "Honor" Logo" AND the LED Notification is blinking first 1 x Red and then 3x in Green. This blinking is repeating 2 or 3 times then only the Honor Logo stays on the screen.
The Phone can access fastboot mode, but not the recovery mode (Volume Up + Power) or the 3-Finger-Mode, to install a stock rom from the sd-card. We have flashed a lot of Roms with the Multitool in the Unbrick Mode, but nothing works, still the same.
Our Problem is:
- We don't know on which version the Phone was before the Update. We know only that it was Kitkat with 4.4.2 and Emui 3.0 --> Maybe this is important for downgrade?
- After the update, he couldn't turn off the phone. So, the phone stayed on until it turned off by itself.
-> When we wanted to enter recovery mode one day later, the screen showed up an Icon with red flash, like the battery was empty.
--> the battery was completely empty because of not turning off -> We charged the battery by connecting the empty battery to another Honor 6 mainboard. After that the icon didn't show up but we still can't enter recovery mode or 3-Finger-Mode.
What can we do now? Every solution would be appreciated.
Thanks in advance
Same problem here. Any hint?
medusa_gorgona said:
Same problem here. Any hint?
Click to expand...
Click to collapse
Until now, i haven't found a solution
works only while charging
seems same is the case with me after updating , it only works when its being charged else only the honor screen and shutting down
me to have same problem
I forgot to say i have an L12.
The only thing that has worked for I have tried is to flashing TWR for emui4.0 from Multitool.
But ROMs and OTAs at this thread are not prepared to be installed via recovery.
I guess I could use an L12 backup to be restored at TWR, if someone can tell me where can I download it.
I want to try everything with stock roms before I try with custom ones.
P.D.: sorry for my bad english.
Finally, I managed to work again.
The steps I followed (keep in mind i have an L12):
Using Multitool -> Unbrick, I extracted the imgs from the B535 ROM
At Stock recovery, I made a factory and cache reset.
I flashed USERDATA from Fastboot
This worked for me.
I hope it helps
i am using l04 and i'm have same problem bro..
Hi to all. I was rooting my P8 Lite and something went wrong with the script i was using (i was connected to the phone via adb).
Firstly i got stuck into the huawei start logo, so i tried to flash update.app, boot.img, recovery,img and system.img (actually not, cause every system.img inside the UPDATE.APP file that i find on the web is corrupted, i don't know). I tried flashing various different boot.img etc... until i got stuck to the Rescue Mode (i kept flashing the files because nothing seemed happen: i was getting stuck on the logo over and over again, without any changes).
Now i'm stuck in Rescue Mode with the two errors:
1. Func NO: 10 (boot image);
2. Error NO: 2 (load failed!).
Two days ago i could still access to the FASTBOOT & RESCUE MODE pressing vol down + power button, i tried flashing some other images and also i tried to update via SD card, so adb and fastboot were able to do their work (but i didn't found where i can update via UPDATE.APP with the SD card).
After that i left the phone in a drawer for two days because i hadn't time to fix it, so it uncharged completely its battery (battery charge=0%).
Today i took it and i tried to charge it up but it didn't... i left it under charge for like 3 hours and it was still unloaded. In this screen i'm stuck now i tried all the possible combinations of buttons, but i even get stuck at this Rescue Mode (it restarts and i got stuck again in it, nothing really happens).
For making the situation even worse when i try to connect the phone to the pc (running w10) via usb cable it doesn't even recognize it, so i can't do anything with adb/fastboot.
Hi !
An user with a similar issue here
This is the Q&A section for your device
Good luck !
I have been given an S7 SM-930FD [Dual Sim] that was supposed to be bricked. It wouldn't boot into anything but I have successfully got it into download mode and been able to successfully flash a stock ROM downloaded from Sammobile [several times] with no errors. Each time I have used the full set of AP,CP,CSC files and the previous owner is not sure what ROM it was on or what he tried to install. I have tried different versions of the firmware for this model for various android versions and regions simply to try and get it to boot, but without success. I have tried HOME CSC and CSC files too.
But each time it starts to install the update / reboot it hangs. Either when it installing the update on the blue screen with the robot and its "erasing" - small rotating symbol just stops and nothing happens OR it loads to the GALAXY S7 normal boot screen then hangs.
When it hangs it will only respond to one key combination Power + Vol Down. It then "switched off" and will not reboot in any mode. When I say "switched off" I mean the screen goes black. However if I then connect the charger, it won't show the charging symbol UNLESS I leave it for a few hours and the battery goes flat. It will then charge and I can boot into download / recovery mode but normal boot starts installing the update and it will hang all over again. On one occasion it hung with and black screen and blue flashing light but again no key combinations worked and I had to wait for the battery to drain.
Also tried Smart Switch Emergency Recovery. Even with the drivers freshly installed it does not recognise the phone, it does accept the model number during initialisation, but once the S/N is entered it comes back and says it can't find the model, S/N or IMEI in the database!
I have researched the web for hours and watched every relevant youtube video and tried their suggested key combinations etc and they just don't work.
So I'm hoping someone can help me resolve this frustrating situation, not least because of the delays between attempts!
Presumably as I can consistently get it into download mode there is a solution out there somewhere???????
What am I doing wrong? Should I be looking at a custom ROM or trying something else?
All help appreciated.
Huawei P8 Max DAV703 Android 6.0 EMUI 4.0 64 GB chinese variant trying to convert to EU
Well I hope that it isn't completely FUBAR.. I know there has to be a way, but i forget how.
No fastboot, no adb support.. no recovery, no bootloader..
I have hard reset which has reset it to bootloop, and I have system upgrade that whatever I do, crashes at 5%
Basically, I bricked my Huawei.
I partially rooted it with kingroot without doing anything..
but other apps saw it as unrooted so i was going to do the proper way, unlock bootloader, etc..
Then I discovered the Huawei SRK tool for bootloader/kernel/recovery etc.
Checked if my bootloader was unlocked, it was.. restarted the phone, it was fine
Then I was going to flash the recovery, and that's when it went into a bootloop
Like always.. just the logo shows, and if i try to turn it off, it restarts.
Huawei P8 Max DAV703 Android 6.0 EMUI 4.0
hard reset works - pressiing vol up down and power pushes it into hard reset but it stays in bootloop.
usb in, vol down power - puts into update mode which stops at 5% with error.
My next idea would be to try and extract the necessary files and try to use the Huawei update extractor tool
but after trying many update files, I can't find the one that would work, unless it will just keep crashing at 5% always.
Would anyone know what I could do in this situation?
Hello,
Got a new Mate 9, and wanted to follow this guide to rebrand my phone from C34 to C636. I unlocked my phone and replaced oeminfo as per guide without major issues. However, after I copied the stock firmware to SD card and updated, the process completed normally to 100%, then the phone went completely black.
Currently, I can turn it on/off via buttons (hearing connect/disconnect sounds in windows), it shows up in fastboot devices, but I am unable to get it into any other state, or have anything display on the screen. I am still able to flash .img files with fastboot still. I have tried reflashing system.img and boot.img, but to no avail.
Am I finished or is there still hope? I'm not sure what I did wrong, and I'm unable to find this exact problem in the forums. Hope this isn't a hard brick yet...
Thanks!
Any fix?
I have the exact same issue rebranding from china to international!! Has anyone found the solution to this problem? My mate 9 wil perpetually be stuck in fast boot no matter what files I flash and what button combi I press
I got the same problem after an update. Black screen, no boot animation or anything, no LED. Stuck in fastboot mode. Can not restart it with any button combination. Has anyone come up with a solution?