Database Info

[Q] My N8000 facing a problem about charging.

Hello, I'm a N8000 user. I'm facing a problem with my charging issue where my tab take a long time to charge and it takes 10 hours to get from 0-60 %. FYI, I'm using a custom rom CM 10.2. What is the main cause with the charging issue? Does it related with charging port, battery or charger itself? please help me. I'm stuck now.

[QUOTE8=syafix21;50085752]Hello, I'm a N8000 user. I'm facing a problem with my charging issue where my tab take a long time to charge and it takes 10 hours to get from 0-60 %. FYI, I'm using a custom rom CM 10.2. What is the main cause with the charging issue? Does it related with charging port, battery or charger itself? please help me. I'm stuck now.[/QUOTE]
Charger maybe, but most on here get a new factory cabel and that takes care of it.

syafix21 said:
Hello, I'm a N8000 user. I'm facing a problem with my charging issue where my tab take a long time to charge and it takes 10 hours to get from 0-60 %. FYI, I'm using a custom rom CM 10.2. What is the main cause with the charging issue? Does it related with charging port, battery or charger itself? please help me. I'm stuck now.
Click to expand...
Click to collapse
Many similar thread already here & also the solutions.
But let me answer anyway.
Charging problem occurs because of one or more things:
Broken Cable
Broken Charger
Incompatible Cable
Incompatible Charger
Broken Outlet
Broken Charging Port
Broken Battery
To properly charging a N80XX we need a charger & cable that can deliver 2.1A, 5V of electrical current & voltage.
The factory default/initial charger & cable designed to deliver these requirements.
Using custom/cheap cable or cable extension can cause charging problem as it wasn't designed to deliver the required current & voltage.
Most custom cables & chargers on the market designed only to deliver 500mA(0.5A) - 1A, 5V.
Broken cable/charger can also cause it to fail in delivering 2.1A, 5V to the device.
Try another original cable/charger combination to test if one of them or both are broken.
Also try another electrical wall outlet to see if the outlet is the culprit.
For Broken Charging Port, you can change it yourself by buying the spare part & replace the broken one, but it requires high technical skills.
One mistake can cause you to ditch your device.
It's safer if you send it to a qualified/authorized service center or if it's still under warranty you can send it back to samsung.
The last possibility is extremely rare.
Broken Battery symptoms are usually different than your problem symptoms.
If the battery is broken, usually the battery life is shorter than usual and may be won't charge at all or charging time is very short.
But if this is your problem, you can't sent it back to samsung - unless the battery is factory damaged -, as you need to change the internal battery.
Try to find out which one is your real problem & fix it
REMINDER:
2.1A is producing heat so much that hurt your skin if you touch the metal part of the cable heads directly right after a long period of charging.
The heat it produce is much more intense than if you are using 500mA or 1A charger.
Poorly designed custom cable/charger can be melted by the heat & may cause explosion!!
...and.....ALWAYS SEARCH BEFORE ASKING!!
I hope this will help

I'd like to add that I was facing similar problem.
In my case, the problem was a stock charger cable.
It was not "broken" (in the meaning of totally cracked or cut cable) but it seemed that it isn't providing a stable voltage. In result, I was able to load the battery only when not using the device (plus the process was as slow as hell), coz when using it, the consumed power was higher than provided by the charger.
Meanwhile, before the problem occured, I was testing other solutions to be able to make charging cord longer than provided stock, which is only 1m. Those tests included using of the additional 2m USB-USB expansion cable which I was plugging to the plastic charger element from the one side and to the regular charging cable at the second side. Such a combination resulted in similiar results as above - then, it became obvious for me that the tablet consumes or wants to consume so high power that low-quality USB cable can't handle, and - especially if it is 2m long - it's degrading onto his way to the tablet.
Then, I am not sure if n8000, by demanding so much power, is not degrading the cable (even stock one) itself. I must say, that after that, I was using another charger cables (n8000 dedicated, one 2m second one 1.5m, both not original) which started to work significantly worse in even shorter time such as two weeks after first use. I am not a electrician or hardware specialist, I dunno if it is possible to degenerate the usb cable with the voltage such as one needed for charging the tablet, but during my over 10 years of passion within mobile devices, I have killed no more than 2 chargers IN TOTAL. N8000 killed 3 charging cables within 8 months.
For some time, I use another combination - I use a 1,5 long A/C extension cord, with a handy "8" plug at the second end. This fits into the charger "central box" after you dissolve it into two parts. Now, the voltage will not degenerate onto this 1.5m distance, as the cable of that type was designed particularly for 230V transfers, but it will still be perfectly mobile. At the second side of the box, I do not plug back the 1m stock cable (or longer not-official ones), but a cable that the Samsung provided along with an external battery, which is possible to buy here and there... It is about... 20 cm long The purpose of this was to avoid the energy lossess that occured when using longer cables and preserve the maximum possible charging rate. Since then (and about 5 months has passed) I have no further problems with charging, and the battery life seems to be much more better than I supposed it to be after over a year of really extensive usage (the only issue of above solution is that the plastic box in the middle is making really really hot, but it is not a critical problem i suppose, as since 5 months it HASN'T melted, exploded or something )

hay....i have the same problem but this tablet doesnt get charging
i think its not about charger because it gives 5v and 2A after the usb flat but in battery connector i got no current and there is just less than 1V voltage

Galaxy 10.1 n8010 won't charge. Tried all solutions.

So I bought a cheap cable from eBay that converts microusb to the proprietary Galaxy connector on this device. Tried to charge the device but it entered a bootloop. Unplugged the cable and tried charging with the stock cable and left it overnight. Woke up and the device was completely dead.
Wouldn't boot at all.
Tore it open, unplugged the battery and plugged it back in. It booted! BUT the battery was critical and it shut off immediately. Tried charging again, no dice.
So I unplugged the battery and applied 4v to get some charge into it. Got the battery up to about 3.6V, booted again and it showed 3%. So in the time I had with the device turned on I tried both cables again but neither would charge the device. I used a multimeter to test the stock cable and it was all good, I even did a beep test between the 4 USB pins in the stock cable and the places they're wired up to inside the note and everything was fine so it's most likely not the cable.
Anyway the 3% is long gone now and I can't boot or charge. The device and battery are fine and definitely working, it just won't charge through USB no matter what. I've tried different power points, different adapters including stock and normal usb ports.
I've also cleaned both the plug and the jack with a toothbrush.
Could it be that the internal charging circuitry got fried when I tried the dodgy cable? If so, is there any way to fix/bypass this?
I'm at a complete loss so any help would be greatly appreciated.
Regards,
Nas.

I would not recommend to charge battery directly outside the device or even remove the battery at all.
First you gotta make sure your cables are capable of charge other galaxy devices if a friend has Tab 7 or Tab 10.1 or other note 10.1 or another try your cables to see if they really work.
Because it may just be your cable, remember batteries have their own circuits boards of sort and batteries are sometimes picky on how they are charge especially OEM batteries that are not suppose to ever be out of the device unless are change for a new one in a repair.
So first of all cable check it a must, again is not as simple as check if all the pins works as this is not a simple USB (Universal Serial Bus) port is a proprietary port and cable, check the port in the tablet too.
As well it may be just a defective battery or worst case even a board problem.

Unfortunately I have no other device to test it with. I might just buy another cable and see how I go.
I know about the circuits on the battery, but I always thought they were just there as a safety measure due to the potentially volatile nature of Li-Ion when it drops below a certain voltage. I'll probably take your advice and stay away from charging it externally, I only did it once to see if the tab died or it was just a dead battery. The voltage never dropped low enough to trigger the circuit to 'kill' it, evidenced by the fact that I could get it back up to 3% just applying a constant voltage.
I'm guessing you've hit it on the head with the last sentence, might be a board problem which would be quite sad. Silly reason for a great device to die.
Thanks a lot for the reply, I'll update this thread once I try an alternative cable for future reference.

Ok, So to update:
I've bought and tested 3 separate cables, all provide 4.99V inside the device, but none of this makes it to the battery so I'm fairly certain it's the charging IC that's dead.
I bought a new battery that was charged to 40% so I was able to flash the device to see if it was maybe the custom kernel messing something up. Flashed to stock via Odin, still not charging.
From what I've read, I need a cell balancing circuit (since the battery is 2-cell Li-Ion) and a charging IC. I've found a suitable IC for fairly cheap, but I'm not sure if the balancing circuit is necessary. The battery already has one of these inside, but I'm not sure if this is just for Voltage/Current protection or if it also balances.
MP24AG: http://eng.it-m.co.kr/cnt/prod/tep_5l/MP24AG.pdf
If anyone knows I'd be very grateful.

[Q] OPO Charging Cable not working with OPO

Hello so i have been using OPO since a month now and suddenly it won't charge so i tried to charge it with a different chargers and they were working..
but here is the thing i don't understand..
the original charger with original cable which came with it is not charging my phone but the same charger is working with other phones so it means the charger is fine.. more over when i plug my samsung usb cable in my OPO charger then it starts to work again but i'm not receiving 2A charge from that cable..
please suggest me something guys..
btw i'm running latest cm update XNPH33R

anyone ? the charger seems to be working with every mobile.. please somebody suggest me something..

It's possible the charger is damaged and only capable of producing a certain percentage of it's original Amperage.
So if you plug in a phone that, say, takes only 1Amp it may work fine but it will break down when your OPO tries to actually use up 100% of the charging capacity.
Smartphones detect unstable/unsafe power sources and can reduce charging current or refuse to charge at all, which may be happening here. I had a defective charger too - in idle it was still providing 5.01V but it did not manage to handle any significant load.
Open a support ticket with OnePlus and have them replace it. In the mean time, I can recommend Anker's wall chargers but any charger will do.

[Q] Charging Too Slow Now

I have had my Verizon Galaxy S4 since February of this year. I've been using the stock Samsung AC charger that came with it. It's always charged the phone pretty fast if I wasn't using the phone. It would charge about 15% in 20 minutes. Now it's only charging about 3 or 4% in 20 or 30 minutes. Now I didn't do anything different to my phone. I've been on this same ROM for over a month and this is just now a problem in the last week. My wife has the exact phone and charger that I have and when I use her charger it charges just as rapidly as mine used to, so I know it's not the usb port on my phone itself. I haven't dropped or damaged my charger at all in any way either.
Does anyone have any ideas about why this is happening?

If it charges fast on you wife's charger you've pretty much answered your own question.
Try using her cable with your charger, if it still charges slow then get a new charger.

gadget! said:
If it charges fast on you wife's charger you've pretty much answered your own question.
Try using her cable with your charger, if it still charges slow then get a new charger.
Click to expand...
Click to collapse
Ok, I'll give that a shot. Thanks.

I had the same problem too ! Did a full battery reset and everything is going good now !
You have to charge it for 12 hours and drain your battery until your phone don't boot. Charge it and here you are !

Yeah these devices act funky every blue moon. My wifes didn't even recognize ANY oem charger for a week. Only detected others as USB devices causing slow charge rate. Removing dust, component cleaner, fresh install, all did no good. Eventually it just resolved the issue itself. All chargers work normally again.

change the usb cables
I also had the same problem before. I'd been using the original charger and usb cable and noticed that charging takes a lot of time than normal.
I found that it's on the usb cable. I accidentally found it when I used gsam battery monitor. It displays the current being received by your phone when charging. Using the original usb cable, it only gets around 600mah. I tried another usb cable (from a previous Samsung device) and now my phone gets 1,900mah (closed to the charger output of 2,000 mah).
Every since I changed the usb cable, my charging is fast now. Hope this helps.

I would try a new cable and Charger that is rated 2.1 amps or better if will be charged real quick

elchingon said:
I would try a new cable and Charger that is rated 2.1 amps or better if will be charged real quick
Click to expand...
Click to collapse
I noticed that using the Pure Nexus rom my charging time became significantly faster. In fact I can get a full charge from nearly dead in just over an hour. This is using the charger and cable that came with the phone.

I had the same problem too ! Did a full battery reset and everything is going good now !
MT tenso

How do you make full battery reset?

The charging rate is based on the output rating of the charger, which is determined by the resistance value between the Data+ and Data- USB pins. If you use a cheap cable with high(er) internal cabling resistance, that will throw off the detected charger output capacity rating, and knock you down to a lower charging current and longer charging time.
Also, one time, even with the original charger and original cable, I couldn't charge at anything more than the default USB 500mA. I ended up having to power off the phone, and power it on again, which fixed the charging current and speed problem.

Install this app & check if it is getting charged at max current; anything less than 1200 mA when screen on & 1900 mA when screen off, you need to change your cable or charger
https://play.google.com/store/apps/details?id=com.abmantis.galaxychargingcurrent.free
Sent from my GT-I9500 using Tapatalk

I read somewhere that if you activate airplane mode the battery is charging faster.

[Q] Anyone know of an app or method to trigger Fast Charging?

I know Adaptive Fast Charging doesn't kick in unless the battery is very low - less than 20%, I believe. And, yes, I have the 15 watt charger(s) that supports AFC/QC2.0
Does anyone know of a way, or if it's even possible, to trigger the phone to kick in fast charging at low, but not painfully low, rates?

Hi
My S6 always charges at the quickest speed possible because when I connect my Samsung Charger the phone tells me I have connected the fast charger and I know it is charging quickly because if I use another charger the time for a full charge will increase significantly. Are you using the official fast charger?

Yes, I've always experimented with the high-power charger that came with the phone.

Fast charging will speed up or slow down automatically based on how charged the battery is. The emptier the battery, the faster it will charge. This charge will slow down gradually as the battery fills up. I don't think there's a way to facilitate this, and even if there was, it probably would not be recommended to do as it might damage the battery.

Fast Charging is a concept, that comes into play when you are connected to the USB port of your PC. Typically when connected in MTP mode (or PTP FWIW), Phone charges slowly in order to prevent damage to the usb port. Certain kernels can permit fast charge provided your laptop has fastcharge usb.
For Wall charging, Rapidcharge technology does exist but requires original samsung charger. With any other OEM charger, it'd be a matter of luck since it'd need to have that 11th pin on the microusb.
Everything else that @Japultra is correct.

I'm almost too embarrassed to admit this, but it was the micro USB cord that wasn't letting my phone avail itself of the high-power adapters. I came across a thicker USB cable and, thinking/hoping that thicker cable also translated to higher gauge conducts, decided to try it out with my phone that was at 65%. Yup. The phone now indicated "fast charging".
I appreciate your forbearance, folks!

bwb8771 said:
I'm almost too embarrassed to admit this, but it was the micro USB cord that wasn't letting my phone avail itself of the high-power adapters. I came across a thicker USB cable and, thinking/hoping that thicker cable also translated to higher gauge conducts, decided to try it out with my phone that was at 65%. Yup. The phone now indicated "fast charging".
I appreciate your forbearance, folks!
Click to expand...
Click to collapse
So the original cable that came with the s6 wasn't working for you?