I searched the forums but couldn't find any answers. This is the first time I'm trying to root an android phone. Things are not going well..
I found a page in Indonesian with instruction on how to root my sister's Lenovo S890. My dad bought her one in China, we live in Europe.
We need to get all the Chinese stuff off and install a "regular" Android version with a normal marketplace (read: whatsapp and google and nothing blocked).
The page with instructions is at http://www.duniaku.net/2013/03/30/u...rtisi-internal-storage-lenovo-ideaphone-s890/ I used Google Translate.
What are the steps? First you need to set up some files such as drivers are required to carry out the process of flashing, SP Flash Tool version 3.1222 or higher, because Lenny chipset MTK6577 S890, S890 and file TWRP to also file a Super User and Busybox will be pushed into the system through TWRP. All the files you can download from the following link:
1 Download Driver Lenovo : Extract file. rar it and then click Install_Driver.exe to install drivers into the system. Rather long process, just wait.
2 Download SP Flash Tool : The author gave the newer version, which v3.1224.01. .
3 Download Team Win Recovery Project : TWRP file is specific to the Lenovo S890, so do not try for another Android, although it also MediaTek chipset.
4 Download Super User and Busybox : Will we push into the system through TWRP custom recovery. Download and copy directly to SD Storage / Memory Cards-mu. Place it outside the / root folder or USB Storage Storage SD / USB storage from your Lenovo S890.
5 Download Data Repartition : This file is optional, just download and place it in the root folder Storage SD / USB Storage. Can later be used to repartition the internal memory is too small Lenovo S890. Author will explain at the bottom.
Click to expand...
Click to collapse
I first installed the Lenovo S890 drivers. Clicked "Install anyway" for everything and rebooted. No problems.
But when I connect the phone it's still complaining that it can't find drivers (and I can't find any official drivers on the Lenovo website either)?
I also installed the MT6577 USB VCOM drivers that I found here http://forum.xda-developers.com/showthread.php?t=2206421 (before I did this the SP Flash Tool did nothing).
I enabled USB Debugging mode on the phone, and took out the SIM, the SD card and the battery when I connect it to USB to the PC. I am running Win7x64.
Every time I try to run (step 2) SP Flash tool, it starts downloading fine, but then Win7 'spits out' the phone (I can hear the 'usb device disconnected' sound) and SP Flash Tool obviously stops working then and gives some error.
I think this is because the MediaTek MT6577 USB VCOM drivers somehow refuse to install correctly? It looks like rooting might go well once this driver thing is fixed?
When I force installation of the drivers I get a Code 10 error and a yellow triangle next to the Preloader and the MediaTEL Vcom something USB driver in Windows Device Manager. ( I searched the forums and didn't find a solution for this).
I forced installation by opening Device Manager, click Add, click Add Legacy Hardware - manual - choose the usb2ser_Win764.info file out of the MT6577 USB VCOM drivers folder
This is what's in the .inf file : Is there anything I can change here to force it to work?
[Version]
Signature="$Windows NT$"
Class=Ports
ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
Provider=%MTK%
DriverVer=05/30/2011,1.1123.0
[Manufacturer]
%MTK%=MTK,NTamd64
[MTK.NTamd64]
%MTK6218%=Reader,USB\Vid_0e8d&Pid_0003,USB\Vid_0e8d&Pid_1003
%MTK_COM%=Reader,USB\Vid_0e8d&Pid_0023&MI_00
%MTK_CAT%=Reader,USB\Vid_0e8d&Pid_0023&MI_02
%MTK_PRELOADER%=Reader, USB\Vid_0e8d&Pid_2000
%MTK_SP_DA%=Reader, USB\Vid_0e8d&Pid_2001
[DestinationDirs]
DefaultDestDir=12
[Reader.NTamd64]
Include=mdmcpq.inf
AddReg=Reader.NTamd64.AddReg
CopyFiles=FakeModemCopyFileSection
[Reader.NTamd64.AddReg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,usbser.sys
HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
[Reader.NTamd64.Services]
AddService = usbser, 0x00000002, Service_Inst
[SourceDisksNames]
[SourceDisksFiles]
[Service_Inst]
DisplayName = %Serial.SvcDesc%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 3 ; SERVICE_DEMAND_START
ErrorControl = 1 ; SERVICE_ERROR_NORMAL
ServiceBinary = %12%\usbser.sys
LoadOrderGroup = Base
[Strings]
MTK = "MediaTek Inc."
MTK6218 = "MTK USB Port"
MTK_COM = "MTK USB Modem Port"
MTK_CAT = "MTK USB Debug Port"
MTK_PRELOADER = "MediaTek PreLoader USB VCOM Port"
MTK_SP_DA = "MediaTek DA USB VCOM Port"
Serial.SvcDesc = "USB Serial emulation modem driver"
Click to expand...
Click to collapse
How do I stop Windows from ejecting the phone (force it to keep it connected as the MediaTek thingie that seems to work with SP Flash Tool?).
Or is there a better way to get an English Android version on this phone?
When I now try to boot the phone it says
tool dl image fail
uboot is blocking by dl info
Did I (soft)brick it??
Thanks in advance for all the help!!
Giving up
Since this seems to be a less popular phone with very little support available - I'm giving up.
Spent 3 full days on this thing with no results, and I just read the GPS also won't work outside of China either.
Now all I need to do is figure out how to get it out of META mode or Factory mode, and get it to boot back into it's normal Chinese Android system.
katejones said:
Since this seems to be a less popular phone with very little support available - I'm giving up.
Spent 3 full days on this thing with no results, and I just read the GPS also won't work outside of China either.
Now all I need to do is figure out how to get it out of META mode or Factory mode, and get it to boot back into it's normal Chinese Android system.
Click to expand...
Click to collapse
Hi, I'm having a much similar problem, since I couldn't flash recovery with SP flash tool, the process was terminated unexpectedly showing error message s_ft_need_download_all_fail (4050), after a couple of days looking for a solution I decided to format the phone with SP Flash Tool, and it worked, right after I tried to flas recovery again...and it worked. I thought I had found the way but when I tried to boot the phone in recovery mode nothing happened, no matter what keys combination I use, how long I press them, the phone just won't react, it doesn't show anything on the screen.
I don't know if this was the logic step to follow, but if you want to try and discover what to do next, up to you, 4 hands are better than 2,maybe yuo find the solution.
Good luck.
There is no button combination to boot recovery, try droidgram-reboot on play store.
Sent from my Lenovo S880
Hope you guys manage to root it soon as I am one of those who waiting for it as I need to root my S890 also.
Sent from my Lenovo S890 using xda app-developers app
katejones said:
I searched the forums but couldn't find any answers. This is the first time I'm trying to root an android phone. Things are not going well..
I found a page in Indonesian with instruction on how to root my sister's Lenovo S890. My dad bought her one in China, we live in Europe.
We need to get all the Chinese stuff off and install a "regular" Android version with a normal marketplace (read: whatsapp and google and nothing blocked).
The page with instructions is at http://www.duniaku.net/2013/03/30/u...rtisi-internal-storage-lenovo-ideaphone-s890/ I used Google Translate.
I first installed the Lenovo S890 drivers. Clicked "Install anyway" for everything and rebooted. No problems.
But when I connect the phone it's still complaining that it can't find drivers (and I can't find any official drivers on the Lenovo website either)?
I also installed the MT6577 USB VCOM drivers that I found here http://forum.xda-developers.com/showthread.php?t=2206421 (before I did this the SP Flash Tool did nothing).
I enabled USB Debugging mode on the phone, and took out the SIM, the SD card and the battery when I connect it to USB to the PC. I am running Win7x64.
Every time I try to run (step 2) SP Flash tool, it starts downloading fine, but then Win7 'spits out' the phone (I can hear the 'usb device disconnected' sound) and SP Flash Tool obviously stops working then and gives some error.
I think this is because the MediaTek MT6577 USB VCOM drivers somehow refuse to install correctly? It looks like rooting might go well once this driver thing is fixed?
When I force installation of the drivers I get a Code 10 error and a yellow triangle next to the Preloader and the MediaTEL Vcom something USB driver in Windows Device Manager. ( I searched the forums and didn't find a solution for this).
I forced installation by opening Device Manager, click Add, click Add Legacy Hardware - manual - choose the usb2ser_Win764.info file out of the MT6577 USB VCOM drivers folder
This is what's in the .inf file : Is there anything I can change here to force it to work?
How do I stop Windows from ejecting the phone (force it to keep it connected as the MediaTek thingie that seems to work with SP Flash Tool?).
Or is there a better way to get an English Android version on this phone?
When I now try to boot the phone it says
tool dl image fail
uboot is blocking by dl info
Did I (soft)brick it??
Thanks in advance for all the help!!
Click to expand...
Click to collapse
please use S890_Customized_SP_Flashtool_20121119(v3.1238.5)
flash again ok
i am solve same your problem
https://www.dropbox.com/s/pwvg553v5z1vtju/S890_Customized_SP_Flashtool_20130109(v3.1238.5).rar
kyaw8719 said:
please use S890_Customized_SP_Flashtool_20121119(v3.1238.5)
flash again ok
i am solve same your problem
https://www.dropbox.com/s/pwvg553v5z1vtju/S890_Customized_SP_Flashtool_20130109(v3.1238.5).rar
Click to expand...
Click to collapse
Thanks for sharing. Is it 100% working or still in testing phase?
Sent from my Lenovo S890 using xda app-developers app
nakTT said:
Thanks for sharing. Is it 100% working or still in testing phase?
Sent from my Lenovo S890 using xda app-developers app
Click to expand...
Click to collapse
i fix 2pcs
kyaw8719 said:
i fix 2pcs
Click to expand...
Click to collapse
Meaning?
Sent from my ST26i
doesn't solve the problem
nakTT said:
Meaning?
Sent from my ST26i
Click to expand...
Click to collapse
It doesn't work same problem downloaded the latest SP Flash from the post doesn't work either.. Is there any of you solved the problem? If so then please go detailed about it.
Hello , after alot of research online I've managed to come up with a way to unbrick my hard bricked device Sky IM-A770K in qhsusb_dload mode with dead boot ,without having to send it to those jtag/medusa services with the help of some methods i found on some vietnames websites . Ok so before we begin I hold no responsibility for the damage that you're device gets so follow the steps exactly as I say .
So this is the ultimate guide to unbrick your IM-A770K or IM-A760S device from qhs_usbdload. :fingers-crossed:
Note : This guide works only for devices stuck in QHS_usbdload mode.(No boot)
(Note: in the links remove blank spaces.)
Note windows 7 is recommended OS to have on this guide :
1. Download the attached files in the link at the end of thread.
1.5.Open cmd in administrator mode and type
Code:
bcdedit /set {globalsettings} advancedoptions true
1.6.Restart Pc and disable driver signature enforcement.
2. Connect sky im a770k to pc with usb.
3. Open device manager. Device should should show as qhsusb_dload.
4.Click on device and click update driver browse for the files qhs_usbdload and chose the driver accordingly to 32bit or 64bit system.
5.Once drivers installed the device should show as Qualcomm Usb Diagnostic 9006 (COMx)(Note: x stands for the number of the port of your device that your pc shows).
6.Install qpst.
7.Open Qpst Configuration , Select Ports->Add New Port -> Select (COMx) of your phone you can check it at device manager.
8.Close. Open emmc Software download.
9. Check the image 'emmc Software download' in the files i've provided for configuration click download.
10. Now your device should show as Qualcom cdma technologies msm in device manager.
10.5 Click on it Update Drivers browse for file select the drivers from the files that i've provided you with . Its qualcom cdma technologies.
10.6.Now you'r device should show in device manager as qualcom diagnostic mode 9025 or 9008.
11. If asked do not format. If device boots up do not attempt the following.You've fixed it . If not continue with below steps.
12.This is the hard part you should be careful with this could damage your internal emmc partitions permanently.
13. Install winHex from winhex folder.
14.Open winhex as administrator.
14.5.Warning this step is for sky im a770k or 760s only if you have another device please do not attempt it as you may damage emmc(sdcard) permanently. Thank You.
15. Select File->Restore Image->Browse to the downloaded files of my guide(Change File type to .01,.img,etc)->Select unbrick770k760s.img. Open.
16. Select Kind of image: Disk.
17.Select Target Disk At Logical Volumes /Partitions Your device should show as qualcom msm 14.9gb (something like that) chose it. WARNING do not chose other drives as they could be damaged.
18. Click ok . And wait till it's finished.
19. Your device should boot up If you followed the steps correctly.
20.Hope this fixes it.
Next all you have to do is flash firmware offline check out this guy do as he does.Or you can google other ways:
htt ps://ww w.you tube.com/watch?v=uDsOm orfp0I
Again I do not hold responsibility for all the above steps . It worked for me maybe it'll work for you or your device could be damaged more who knows so do this on your own risk. If you chose to do this be sure to install the drivers properly. Research on how to install them if you're having trouble doing it .If this methods doesn't work for you keep researching online maybe you'll find a way.It took me a week of research before i could come up with this. For any questions you have you can ask me.
Thank you And Good Luck! :good:
Download Files:
htt ps://drive.go ogle.com/file/d/0B4r0yxK Mlkspa FQ5 cE1QUzR ObDA/view ?usp=sharing
Hello Sir,
Congratulations on unbricking phone. I am having similar problem with my IM-A860L and I am not able to find appropriate files for my device. Can you please help? I have also opened a help thread here: https://forum.xda-developers.com/general/help/help-bricked-im-a860l-pantech-vega-6-t3639621
Please help!
help needed
Aster95 said:
Hello , after alot of research online I've managed to come up with a way to unbrick my hard bricked device Sky IM-A770K in qhsusb_dload mode with dead boot ,without having to send it to those jtag/medusa services with the help of some methods i found on some vietnames websites . Ok so before we begin I hold no responsibility for the damage that you're device gets so follow the steps exactly as I say .
So this is the ultimate guide to unbrick your IM-A770K or IM-A760S device from qhs_usbdload. :fingers-crossed:
Note : This guide works only for devices stuck in QHS_usbdload mode.(No boot)
(Note: in the links remove blank spaces.)
Note windows 7 is recommended OS to have on this guide :
1. Download the attached files in the link at the end of thread.
1.5.Open cmd in administrator mode and type
Code:
bcdedit /set {globalsettings} advancedoptions true
1.6.Restart Pc and disable driver signature enforcement.
2. Connect sky im a770k to pc with usb.
3. Open device manager. Device should should show as qhsusb_dload.
4.Click on device and click update driver browse for the files qhs_usbdload and chose the driver accordingly to 32bit or 64bit system.
5.Once drivers installed the device should show as Qualcomm Usb Diagnostic 9006 (COMx)(Note: x stands for the number of the port of your device that your pc shows).
6.Install qpst.
7.Open Qpst Configuration , Select Ports->Add New Port -> Select (COMx) of your phone you can check it at device manager.
8.Close. Open emmc Software download.
9. Check the image 'emmc Software download' in the files i've provided for configuration click download.
10. Now your device should show as Qualcom cdma technologies msm in device manager.
10.5 Click on it Update Drivers browse for file select the drivers from the files that i've provided you with . Its qualcom cdma technologies.
10.6.Now you'r device should show in device manager as qualcom diagnostic mode 9025 or 9008.
11. If asked do not format. If device boots up do not attempt the following.You've fixed it . If not continue with below steps.
12.This is the hard part you should be careful with this could damage your internal emmc partitions permanently.
13. Install winHex from winhex folder.
14.Open winhex as administrator.
14.5.Warning this step is for sky im a770k or 760s only if you have another device please do not attempt it as you may damage emmc(sdcard) permanently. Thank You.
15. Select File->Restore Image->Browse to the downloaded files of my guide(Change File type to .01,.img,etc)->Select unbrick770k760s.img. Open.
16. Select Kind of image: Disk.
17.Select Target Disk At Logical Volumes /Partitions Your device should show as qualcom msm 14.9gb (something like that) chose it. WARNING do not chose other drives as they could be damaged.
18. Click ok . And wait till it's finished.
19. Your device should boot up If you followed the steps correctly.
20.Hope this fixes it.
Next all you have to do is flash firmware offline check out this guy do as he does.Or you can google other ways:
htt ps://ww w.you tube.com/watch?v=uDsOm orfp0I
Again I do not hold responsibility for all the above steps . It worked for me maybe it'll work for you or your device could be damaged more who knows so do this on your own risk. If you chose to do this be sure to install the drivers properly. Research on how to install them if you're having trouble doing it .If this methods doesn't work for you keep researching online maybe you'll find a way.It took me a week of research before i could come up with this. For any questions you have you can ask me.
Thank you And Good Luck! :good:
Download Files:
htt ps://drive.go ogle.com/file/d/0B4r0yxK Mlkspa FQ5 cE1QUzR ObDA/view ?usp=sharing
Click to expand...
Click to collapse
please can you give me the Korean site addresses i want A870L Qpts files in .hex and mnf files.
if you can provide please help me in this matter
Everyone finds how to unbrick snapdragon androids. If your Android detects in HS-USB QDLoader 9008 mode then you can unbrick you Android.
There is tool to unbrick snapdragon Android. You found on Google Android dbrick tool. But the actual name of the tool is Tool Studio.
Right click Toolstudio.exe and run as administrator, put the password. Click the green refresh icon and Tool Studio will see the Qualcomm 9008 port, if not unplug the usb cable and plug in again, click refresh.
Click “Browse” and select your rom’s folder. Now click on “Advanced” and see all files are selected or not. Then click on start. It will flashed ROM under 2 minutes.
I am giving the link of the tool. These is zip file. Password given in the zip.
Mod Edit: Malicious file removed
Thread closed for containing malicious file
Pay attention: contains Trojan infection!
Pay attention: contains Trojan infection!
Antivirus software detects it trojan just ignore it. Disable antivirus before run these tool. Tool is not harmful.
This Thread is dedicated to LG V10 H900 variant only, I may add another threads for other variants soon.
If you tried to downgrade your H900 to lower version or flashed with wrong firmware, Chances you are stuck on Qualcomm Mode 9008.
in this guide I will show you how to Unbrick Your H900 LG V10.
1- Install Qualcomm Drivers: Download from here
2- Install QPST: Download QPST 2.7.460 from here
3- Download Qfil Unbrick Files from here: H90021w
4- Extract the Qfil zip file you downloaded.
5- After installing the drivers & QPST, Open Qfil from this location C:\Program Files (x86)\QUALCOMM\QPST\bin
- Plug your Phone via USB, If Everything works correctly the phone should appear as Qualcomm HS -USB QDLoader 9008 on top.
- From Select Build Type select Flat Build.
- Tap On Browse and select the file prog_emmc_firehose_8992_lite_lge1.mbn from the Qfil unbrick files Folder.
- Tap on Load XML Button and select rawprogram0.xml then patch0.xml.
- Click on Download, The unbrick process should begin,
6- If everything works correctly, You should see success in the log area, After that disconnect the phone, unplug & plug the battery, Hold Volume UP and connect the USB cable, Your phone should go into Download Mode.
7- Flash your phone with the latest version H90021w (recommended), You can download it from here.
Note: If you have a problem with Qualcomm drivers, You should disable driver signature verification from your windows. Just google it & you will find how.
I'm sorry for my bad english.
Donate if I helped.
If you have any issues you can post it here, I will try to help.
H900
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Just tried this method got this error
FireHose Loader fail:FHL Loader failrocessFail
I have just created XDA Account and i cannot post the link of screenshot.
cranknet said:
This Thread is dedicated to LG V10 H900 variant only, I may add another threads for other variants soon.
If you tried to downgrade your H900 to lower version or flashed with wrong firmware, Chances you are stuck on Qualcomm Mode 9008.
in this guide I will show you how to Unbrick Your H900 LG V10.
1- Install Qualcomm Drivers: Download from here
2- Install QPST: Download QPST 2.7.460 from here
3- Download Qfil Unbrick Files from here: H90021w
4- Extract the Qfil zip file you downloaded.
5- After installing the drivers & QPST, Open Qfil from this location C:\Program Files (x86)\QUALCOMM\QPST\bin
- Plug your Phone via USB, If Everything works correctly the phone should appear as Qualcomm HS -USB QDLoader 9008 on top.
- From Select Build Type select Flat Build.
- Tap On Browse and select the file prog_emmc_firehose_8992_lite_lge1.mbn from the Qfil unbrick files Folder.
- Tap on Load XML Button and select rawprogram0.xml then patch0.xml.
- Click on Download, The unbrick process should begin,
6- If everything works correctly, You should see success in the log area, After that disconnect the phone, unplug & plug the battery, Hold Volume UP and connect the USB cable, Your phone should go into Download Mode.
7- Flash your phone with the latest version H90021w (recommended), You can download it from here.
Note: If you have a problem with Qualcomm drivers, You should disable driver signature verification from your windows. Just google it & you will find how.
I'm sorry for my bad english.
Donate if I helped.
If you have any issues you can post it here, I will try to help.
Click to expand...
Click to collapse
Thanks you Bro your solution worked for me for my H900.
Do you have a similar solution for the VS990W LG V10 i have one thats stuck in Qualcomm mode
Not working with my v10 h900
cranknet said:
This Thread is dedicated to LG V10 H900 variant only, I may add another threads for other variants soon.
If you tried to downgrade your H900 to lower version or flashed with wrong firmware, Chances you are stuck on Qualcomm Mode 9008.
in this guide I will show you how to Unbrick Your H900 LG V10.
1- Install Qualcomm Drivers: Download from here
2- Install QPST: Download QPST 2.7.460 from here
3- Download Qfil Unbrick Files from here: H90021w
4- Extract the Qfil zip file you downloaded.
5- After installing the drivers & QPST, Open Qfil from this location C:\Program Files (x86)\QUALCOMM\QPST\bin
- Plug your Phone via USB, If Everything works correctly the phone should appear as Qualcomm HS -USB QDLoader 9008 on top.
- From Select Build Type select Flat Build.
- Tap On Browse and select the file prog_emmc_firehose_8992_lite_lge1.mbn from the Qfil unbrick files Folder.
- Tap on Load XML Button and select rawprogram0.xml then patch0.xml.
- Click on Download, The unbrick process should begin,
6- If everything works correctly, You should see success in the log area, After that disconnect the phone, unplug & plug the battery, Hold Volume UP and connect the USB cable, Your phone should go into Download Mode.
7- Flash your phone with the latest version H90021w (recommended), You can download it from here.
Note: If you have a problem with Qualcomm drivers, You should disable driver signature verification from your windows. Just google it & you will find how.
I'm sorry for my bad english.
Donate if I helped.
If you have any issues you can post it here, I will try to help.
Click to expand...
Click to collapse
Download everything, try anyway but always the same error, or firehose error or Sahara error. Download different versions of Qfil, remove the driver signature, probe in windows 7 and windows 10, and I could never make it work.
With the lg firmware extract remove the DZ from the firmware h900021w. Once I had the DZ, I extracted it in another folder. That same folder I copied into the BIN folder of the QFIL, but I did not achieve anything either. The unbrick files must be in the firmware folder (copy and paste). Or they should be in a separate folder) Also try the 2 ways and nothing, maybe this is doing something wrong
Does it work on LG v10 h901 ?
cranknet said:
This Thread is dedicated to LG V10 H900 variant only, I may add another threads for other variants soon.
If you tried to downgrade your H900 to lower version or flashed with wrong firmware, Chances you are stuck on Qualcomm Mode 9008.
in this guide I will show you how to Unbrick Your H900 LG V10.
1- Install Qualcomm Drivers: Download from here
2- Install QPST: Download QPST 2.7.460 from here
3- Download Qfil Unbrick Files from here: H90021w
4- Extract the Qfil zip file you downloaded.
5- After installing the drivers & QPST, Open Qfil from this location C:\Program Files (x86)\QUALCOMM\QPST\bin
- Plug your Phone via USB, If Everything works correctly the phone should appear as Qualcomm HS -USB QDLoader 9008 on top.
- From Select Build Type select Flat Build.
- Tap On Browse and select the file prog_emmc_firehose_8992_lite_lge1.mbn from the Qfil unbrick files Folder.
- Tap on Load XML Button and select rawprogram0.xml then patch0.xml.
- Click on Download, The unbrick process should begin,
6- If everything works correctly, You should see success in the log area, After that disconnect the phone, unplug & plug the battery, Hold Volume UP and connect the USB cable, Your phone should go into Download Mode.
7- Flash your phone with the latest version H90021w (recommended), You can download it from here.
Note: If you have a problem with Qualcomm drivers, You should disable driver signature verification from your windows. Just google it & you will find how.
I'm sorry for my bad english.
Donate if I helped.
If you have any issues you can post it here, I will try to help.
Click to expand...
Click to collapse
Hello Cranknet
Do you have the Unlock files Raw and MDB for H901 Variant ?
can you please post a fix for lg v10 t-mobile version
thanku
After flash it still same
guys i have vs990 board after flashed success with that qfil it still on qualcome mode 9008
if have any new unbrick files pls i need them
Thanks very much! Worked for me.
plz plz plz
can u give me the qfil for lg h901bk plz plz plz
thanks very much it worked for me
I bought a V10 H901 in Aliexpress and the IMEI sayd that was a H901BK. It was with the T-Mobile software and Android 6 MM. In PC it said the H90121j and I wanted to upgrade to 7 Nougat and I put the phone in the PC and after the update with LG Bridge it just bricked. Died and do not back to life. I unbreacked my phone with this tutorial.
The Unbrick H901 SD card didn't work, but this worked.
After that, I tried to install all H901 firmwares and didn't work. So I decided to install the H900 firmware and the phone finelly worked. It's working everything fine with no malfunction. Just the Android back to 6 MM, but with the AT&T apps.
I didn't understand nothing. My phone was a fake H901, because is a Refurbished phone. I'd like to install the Nougat update. Is it possible?
My Lg V10 was t mobile version phone on lollipop and F600L motherboard ,
i tried to flash it with lg bridge.
But it bricked, finally your method worked but , still the thing is now my network is disabled. Cellular Radio is off.
Please help to turn the cellular radio on.
Is there any way of forcing it to Qualcomm mode 9008? I have a H900 that wouldn't let me flash 20j via LGUP, and had to try 21w, which caused the device to be stuck at the LG logo and freezes at the factory reset screen after pressing the power button to initiate the factory reset.
Travisholt92 said:
Is there any way of forcing it to Qualcomm mode 9008? I have a H900 that wouldn't let me flash 20j via LGUP, and had to try 21w, which caused the device to be stuck at the LG logo and freezes at the factory reset screen after pressing the power button to initiate the factory reset.
Click to expand...
Click to collapse
If you already flash 21w and let it run, I'm afraid you can't go back to 20j. But you can go to 9008 mode by using deep flash cable (easy to make, just google it) or open the board and short the 2 points (once again, google it).
ardian1899 said:
If you already flash 21w and let it run, I'm afraid you can't go back to 20j. But you can go to 9008 mode by using deep flash cable (easy to make, just google it) or open the board and short the 2 points (once again, google it).
Click to expand...
Click to collapse
Thank you for this information. I think I still have the device laying around somewhere to try this
Can this process work for h961n hongkong variant also
cranknet said:
This Thread is dedicated to LG V10 H900 variant only, I may add another threads for other variants soon.
If you tried to downgrade your H900 to lower version or flashed with wrong firmware, Chances you are stuck on Qualcomm Mode 9008.
in this guide I will show you how to Unbrick Your H900 LG V10.
1- Install Qualcomm Drivers: Download from here
2- Install QPST: Download QPST 2.7.460 from here
3- Download Qfil Unbrick Files from here: H90021w
4- Extract the Qfil zip file you downloaded.
5- After installing the drivers & QPST, Open Qfil from this location C:\Program Files (x86)\QUALCOMM\QPST\bin
- Plug your Phone via USB, If Everything works correctly the phone should appear as Qualcomm HS -USB QDLoader 9008 on top.
- From Select Build Type select Flat Build.
- Tap On Browse and select the file prog_emmc_firehose_8992_lite_lge1.mbn from the Qfil unbrick files Folder.
- Tap on Load XML Button and select rawprogram0.xml then patch0.xml.
- Click on Download, The unbrick process should begin,
6- If everything works correctly, You should see success in the log area, After that disconnect the phone, unplug & plug the battery, Hold Volume UP and connect the USB cable, Your phone should go into Download Mode.
7- Flash your phone with the latest version H90021w (recommended), You can download it from here.
Note: If you have a problem with Qualcomm drivers, You should disable driver signature verification from your windows. Just google it & you will find how.
I'm sorry for my bad english.
Donate if I helped.
If you have any issues you can post it here, I will try to help.
Click to expand...
Click to collapse
Can you please make Qfil unbrick file for h961n10c please as i need it very urgently..