I accidentally removed Bootloader on OnePlus One and softbricked it...... - ONE Q&A, Help & Troubleshooting

I ****ed up badly and I have no idea what to do. Someone.. help me? I used TWRP, I updated to CM13 and yet didn't come with GApps so I flashed the GApps with another Zip file but it kept giving me, "Set up Wizard has stopped working". How do I get bootloader back on my OnePlus one??? My boyfriend got it from hardbrick to softbrick but I need my phone to work by the 9th. Please help me.........

Wtf?! Why do you think the bootloader is gone?
Reboot back to TWRP, wipe system + data and reflash cm13 + gapps.
DO NOT REBOOT between flashing cm13 and gapps.

AcmE85 said:
Wtf?! Why do you think the bootloader is gone?
Reboot back to TWRP, wipe system + data and reflash cm13 + gapps.
DO NOT REBOOT between flashing cm13 and gapps.
Click to expand...
Click to collapse
We already tried that. Now stuck in bootloop.

w0lfy117 said:
We already tried that. Now stuck in bootloop.
Click to expand...
Click to collapse
Did you flash supersu too? If yes, repeat the above steps and don't do it.

AcmE85 said:
Did you flash supersu too? If yes, repeat the above steps and don't do it.
Click to expand...
Click to collapse
I don't have supersu installed. I had wiped and unrooted it after it was stuck on bootloop.

w0lfy117 said:
I ****ed up badly and I have no idea what to do. Someone.. help me? I used TWRP, I updated to CM13 and yet didn't come with GApps so I flashed the GApps with another Zip file but it kept giving me, "Set up Wizard has stopped working". How do I get bootloader back on my OnePlus one??? My boyfriend got it from hardbrick to softbrick but I need my phone to work by the 9th. Please help me.........
Click to expand...
Click to collapse
You never mentioned what gapps you flashed? Flash opengapps (full) and CM13 and do a full wipe (system, data and cache) and you should be fine. Don't flash Supersu if you're flashing CM13
Sent from my A0001 using Tapatalk

AcmE85 said:
Did you flash supersu too? If yes, repeat the above steps and don't do it.
Click to expand...
Click to collapse
I plugged it into my laptop and then wiped everything. I installed CM12 and flashed it. Was still on bootloop. I could only go into fastboot mode.

Renosh said:
You never mentioned what gapps you flashed? Flash opengapps (full) and CM13 and do a full wipe (system, data and cache) and you should be fine. Don't flash Supersu if you're flashing CM13
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
The GApps for CM13.

w0lfy117 said:
I plugged it into my laptop and then wiped everything. I installed CM12 and flashed it. Was still on bootloop. I could only go into fastboot mode.
Click to expand...
Click to collapse
I would strongly recommend going back to stock rom. This way you can ensure the device itself is not broken or damaged.
Since only fastboot can be entered you should download the CyanogenOS fastboot package from https://cyngn.com/support and flash it with the install script. Please note that cm-13.0-ZNH0EAS2JK-bacon-signed-fastboot-2d1a3b8dca.zip is the right pack to flash since no root comes with it.

You should download this file from https://cyngn.com/support cm-13.0-ZNH0EAS2JK-bacon-signed-fastboot-2d1a3b8dca.zip
and have Drivers installed, ADB,Fastboot (Android SDK)too.
Chromium said:
[*] Driver Installation - Download and install the Universal ADB Driver. Alternatively, use this method.
Click to expand...
Click to collapse
Or Just let your Windows handle this.
Android SDK - you can download SDK manager(141MB) here and let him download platformtools only or download my attached rar file (2 MB), where is platform tools that u need.
Extract CM fastboot zip to your adb,fastboot folder (mine is: .....\sdk\platform-tools ), run your phone in download (fastboot mode), ofcourse connect it to pc .
Open CMD in that folder (Shift+Right click and open new cmd window here)
Check if its connected by running this command:
Code:
fastboot devices
if it show some device connected, then run these commands one by one:
Code:
fastboot flash aboot emmc_appsboot.mbn
fastboot flash LOGO logo.bin
fastboot flash modem NON-HLOS.bin
fastboot flash rpm rpm.mbn
fastboot flash sbl1 sbl1.mbn
fastboot flash dbi sdi.mbn
fastboot flash oppostanvbk static_nvbk.bin
fastboot flash tz tz.mbn
fastboot flash boot boot.img
fastboot flash recovery recovery.img
U can download TWRP or some else recovery and flash it too.
After that u wont loose any internal data, so i would recommend you full wipe except internal storage and flash some new rom + gapps.

gs-crash-24-7 said:
I would strongly recommend going back to stock rom. This way you can ensure the device itself is not broken or damaged.
Since only fastboot can be entered you should download the CyanogenOS fastboot package from https://cyngn.com/support and flash it with the install script. Please note that cm-13.0-ZNH0EAS2JK-bacon-signed-fastboot-2d1a3b8dca.zip is the right pack to flash since no root comes with it.
Click to expand...
Click to collapse
My boyfriend has tried every method possible. Even hard bricking it and then soft bricking it and then trying to recover everything. And it's just stuck on bootloop. Also.. I have tried to boot into bootloader and it only goes into fastboot mode and recovery. Nothing else. As if bootloader didn't exist at all. I'm very concerned and I'm freaking out...

Whatever he did, he did not hard brick it and then soft-bricked it afterwards.
If its hardbricked, you successfully turned it into a brick and there is no easy way to get it back.
I am 98% sure that the solution posted in post #10 works for you.
Instead of posting the same thing over and over, tell us what you tried so far and why it did not work.
Basic IT-Support 101.

w0lfy117 said:
My boyfriend has tried every method possible. Even hard bricking it and then soft bricking it and then trying to recover everything. And it's just stuck on bootloop. Also.. I have tried to boot into bootloader and it only goes into fastboot mode and recovery. Nothing else. As if bootloader didn't exist at all. I'm very concerned and I'm freaking out...
Click to expand...
Click to collapse
There is no bootloader mode on the Oneplus One, just fastboot and recovery. You can do everything you need from those two modes. Try the instructions on post 10
Sent from my A0001 using Tapatalk

keks411 said:
Whatever he did, he did not hard brick it and then soft-bricked it afterwards.
If its hardbricked, you successfully turned it into a brick and there is no easy way to get it back.
I am 98% sure that the solution posted in post #10 works for you.
Instead of posting the same thing over and over, tell us what you tried so far and why it did not work.
Basic IT-Support 101.
Click to expand...
Click to collapse
What I did was flash CM13. It didn't come with CM13 GApps. I flashed that after I noticed it. I still had CM12.1 on my SD card. Or so I thought. I wiped it and found out that I didn't have CM12.1 on my SD card anymore.
I downloaded bacon toolkit because my OnePlus One was then stuck on bootloop. I hadn't done a thing to it. Didn't set up adb or anything. I couldn't. Kept getting a pop up (right after I closed it, it would pop up again. Over and over) "set up wizard has stopped working". I couldn't even open the settings without it harassing me. I restarted my phone and the pop up kept coming back up. Once I wiped the CM13, I went to look for CM12.1. When I didn't have it, I realized that I wasn't going to be able to use my phone die to bootloop for an hour.
I used the Bacom Toolkit. Downloaded ADB.exe and worked my way up. I imputed the information. 64 GB, 12.1 CM and then it went on to loading the information for the toolkit.
When it didn't recongize it, I had to keep launching the ADB.exe to get the Toolkit to read the phone. Finally about 12 minutes or so into it, I clicked on bootloop/softbrick option and it lead me to some other options. When I read carefully through them, I had clicked on these (in order)
"Wipe"
"Install from zip"
"Installed 12.1Yoga(something numbers ;-; I forgot the exact name, I'll see if I find it tomorrow)"
"Unzipped"
"Pushed"
"Full unroot"
"Lock eom"
I was stuck on CyanogenMod.

Then now follow the instructions from post #10 and everything will be fine.

Related

Bricked my phone trying to update to 4.2! Help!

Hello, all. I've spent the last four hours trying update my AT&T HTC One X running Android 4.1.1 to 4.2.2 and I failed hard!
First, I used the all-in-one toolkit to unlock my bootloader, flash clockwork recovery, and root the phone. The first guide I was following gave me error status 7 when I tried to flash the ROM so I wen to this guide:
update-htc-one-x-cm101-android-422-jelly-bean-custom-firmware/2/ (from team android website)
I got to the step below using the SDK I downloaded from dev.android.com and now my phone is dead! The HTC logo appears and then it goes to a black screen. Luckily, I can still reach my fastboot and clockwork recovery menu but nothing I try makes the phone boot.
Step 8 - Type the following command and press Enter.
fastboot flash boot boot.img
Step 9 - Then, type the following command and press Enter.
fastboot reboot
I just want my phone back to normal please! I don't care about rooting anymore. Thank you.
zenkix said:
Hello, all. I've spent the last four hours trying update my AT&T HTC One X running Android 4.1.1 to 4.2.2 and I failed hard!
First, I used the all-in-one toolkit to unlock my bootloader, flash clockwork recovery, and root the phone. The first guide I was following gave me error status 7 when I tried to flash the ROM so I wen to this guide:
update-htc-one-x-cm101-android-422-jelly-bean-custom-firmware/2/ (from team android website)
I got to the step below using the SDK I downloaded from dev.android.com and now my phone is dead! The HTC logo appears and then it goes to a black screen. Luckily, I can still reach my fastboot and clockwork recovery menu but nothing I try makes the phone boot.
Step 8 - Type the following command and press Enter.
fastboot flash boot boot.img
Step 9 - Then, type the following command and press Enter.
fastboot reboot
I just want my phone back to normal please! I don't care about rooting anymore. Thank you.
Click to expand...
Click to collapse
Alright, the ROMs you've been trying to flash are for the quad core One X... please stay in this forum and you should be good to go!
Any ROMs and kernels from here http://forum.xda-developers.com/forumdisplay.php?f=1541 and here http://forum.xda-developers.com/forumdisplay.php?f=1726. Try to flash something from there and report back (you'll still need to flash boot.img
RollTribe said:
Alright, the ROMs you've been trying to flash are for the quad core One X... please stay in this forum and you should be good to go!
Any ROMs and kernels from here http://forum.xda-developers.com/forumdisplay.php?f=1541 and here http://forum.xda-developers.com/forumdisplay.php?f=1726. Try to flash something from there and report back (you'll still need to flash boot.img
Click to expand...
Click to collapse
Thank you very much for your help? Could you please point me to a ROM to flash? I looked through those links and have no idea which to pick/what to do. It doesn't even have to be 4.2...I just want a working phone again. Thanks again!
zenkix said:
Thank you very much for your help? Could you please point me to a ROM to flash? I looked through those links and have no idea which to pick/what to do. It doesn't even have to be 4.2...I just want a working phone again. Thanks again!
Click to expand...
Click to collapse
Well... What would you like? Completely stock? Sense with tweaks? 4.2 with minor tweaks? 4.2 with a ton of tweaks?
RollTribe said:
Well... What would you like? Completely stock? Sense with tweaks? 4.2 with minor tweaks? 4.2 with a ton of tweaks?
Click to expand...
Click to collapse
4.2 with minor tweaks sounds great! Although right now I kinda just want to the stock "boot.img" to verify that my phone is still usable and not totally bricked.
zenkix said:
4.2 with minor tweaks sounds great! Although right now I kinda just want to the stock "boot.img" to verify that my phone is still usable and not totally bricked.
Click to expand...
Click to collapse
Alright then CM10.1 http://forum.xda-developers.com/showthread.php?t=2064621 and AOKP http://forum.xda-developers.com/showthread.php?t=2064724 will both suit you. These have the different boot.img than stock, but just extract and fastboot flash boot boot.img and you should be good to go!
RollTribe said:
Alright then CM10.1 http://forum.xda-developers.com/showthread.php?t=2064621 and AOKP http://forum.xda-developers.com/showthread.php?t=2064724 will both suit you. These have the different boot.img than stock, but just extract and fastboot flash boot boot.img and you should be good to go!
Click to expand...
Click to collapse
Quick update...I flashed boot.img of the first link (CynogenMod) and my phone got passed the "HTC Quietly Brilliant" screen! But now it seems stuck on HTC One (Beats Audio at the bottom) screen. I'll give it a few minutes...
I'm really worried that I did major damage to my phone in the bootloader and clockwork recovery menus. I literally tried every single option there trying to get my phone to boot earlier.
Oh man...it seems stuck. Maybe I should just flash the completely stock boot.img file. If that works, I will factory reset my phone just to make sure everything is back to how it was before.
Dude it sounds like you're trying to flash a cm boot.img with a Sense ROM, that ain't gonna work. You can't just extract a boot.img and flash it with a different ROM.
You need to extract the boot.img from the ROM you're about to flash, then flash that ROM, then flash the boot.img you just extracted.
Sent from my Evita
timmaaa said:
Dude it sounds like you're trying to flash a cm boot.img with a Sense ROM, that ain't gonna work. You can't just extract a boot.img and flash it with a different ROM.
You need to extract the boot.img from the ROM you're about to flash, then flash that ROM, then flash the boot.img you just extracted.
Sent from my Evita
Click to expand...
Click to collapse
Thanks for your help man. If what you're saying is correct, does that mean my phone is hopeless? I deleted/wiped everything using the ClocworkMod Recovery menu. When I choose "install zip from sdcard" I get "E: Can't mount /sdcard/" and when I try to mount an sdcard I get "Error mounting /sdcard". I don't think I can flash any ROMs right now unless install zip from sideload is an option (I don't know how sideloading works).
Try using TWRP recovery instead, you'll find it here:
http://goo.im/devs/OpenRecovery/evita
Download it, check md5 is correct, then:
fastboot flash recovery filename.img
(Filename = exact TWRP recovery filename)
Then issue this command:
fastboot erase cache
Then:
fastboot reboot-bootloader
Now you should be able to select recovery on your phone screen and it should boot into TWRP. Next go to mount and mount usb storage. See if it comes up in Windows, it might need to be formatted from the sounds of it. If it doesn't show up as a usable drive, format it to fat32.
Once that's done you should be able to copy a ROM to your phone to flash. So copy it over, then extract the boot.img from the copy on your pc, then put the boot.img in your fastboot folder.
Do a full wipe in recovery (cache/dalvik/factory reset/system), then install the ROM, then reboot to bootloader, make sure phone is connected by usb, make sure fastboot usb comes up on your phone screen then issue the following command:
fastboot flash boot boot.img
Make sure it's the boot.img from the ROM you just flashed. Now once that's done you should be able to reboot into the ROM.
Sent from my Evita
timmaaa said:
Try using TWRP recovery instead, you'll find it here:
http://goo.im/devs/OpenRecovery/evita
Download it, check md5 is correct, then:
fastboot flash recovery filename.img
(Filename = exact TWRP recovery filename)
Then issue this command:
fastboot erase cache
Then:
fastboot reboot-bootloader
Now you should be able to select recovery on your phone screen and it should boot into TWRP. Next go to mount and mount usb storage. See if it comes up in Windows, it might need to be formatted from the sounds of it. If it doesn't show up as a usable drive, format it to fat32.
Once that's done you should be able to copy a ROM to your phone to flash. So copy it over, then extract the boot.img from the copy on your pc, then put the boot.img in your fastboot folder.
Do a full wipe in recovery (cache/dalvik/factory reset/system), then install the ROM, then reboot to bootloader, make sure phone is connected by usb, make sure fastboot usb comes up on your phone screen then issue the following command:
fastboot flash boot boot.img
Make sure it's the boot.img from the ROM you just flashed. Now once that's done you should be able to reboot into the ROM.
Sent from my Evita
Click to expand...
Click to collapse
This sounds like a good plan. I will give it a try tomorrow after work. Thank you guys for your help!
I couldn't sleep...so I followed your steps and my phone is now alive! Thank you!
I think now I need to flash GApps, right? I have this ---> gapps-jb-20130301-signed.zip
Any chance that's the wrong zip file? Do I need a special one for CM10.1?
That's the right gapps zip, it's the most recent one so yeah you're good to flash it.
And no problems, you're welcome
Sent from my Evita

Can't flash twrp need help!

Okay so I received my opo today and wanted to unlock and root etc.. I managed to install drivers and download a toolkit which managed to unlock my bootloader but wouldn't flash the recovery so I attempted it manually via fastboot and after flashing it would reboot to a back screen then vibrate and reboot to system.. Been doing that all night? Any ideas? many thanks in advance new to this phone
Exactly what recovery version are you trying to flash? What OS is on the phone? Get rid of the toolkit, they're nothing but trouble.
Twrp 2.8.1. And its running android 4.4.4 cyanogen mod.. I have mate haha. I take it fastboot and adb are installed correctly as it shows my opo after typing fastboot devices and it unlocked my boot loader soo I'm confused
daviss101 said:
Twrp 2.8.1. And its running android 4.4.4 cyanogen mod.. I have mate haha. I take it fastboot and adb are installed correctly as it shows my opo after typing fastboot devices and it unlocked my boot loader soo I'm confused
Click to expand...
Click to collapse
Try flashing the recovery again, followed by this command
Code:
fastboot erase cache
Then:
Code:
fastboot reboot
Then try booting into recovery.
PS. You've unchecked the "update CM recovery" option in Developer Options, right?
same problem for me. tried manually installing any custom recovery, tried two different toolkits. it flashes and reboots, but then you can never enter the recovery app. even attempting to put stock back fails. i attempted the format the cache and that didn't do a thing for me. basically had to enable cm recovery updates and reset to factory in the os. after that i was back to scratch at least.
I was able to figure it out. Appears the version of TWRP is quite particular for some reason. Once I tried the latest build from here dl dot twrp dot me/bacon/ the problem was solved. Thanks for the tip @snickler
GrizzlyD said:
I was able to figure it out. Appears the version of TWRP is quite particular for some reason. Once I tried the latest build from here dl dot twrp dot me/bacon/ the problem was solved. Thanks for the tip @snickler
Click to expand...
Click to collapse
No problemo. ^_^

[Q] cm11 -> cm12 flashing issues

so, i recently updated my oneplus one from cm11 to cm12.1 and when cm12 loaded in, i got a repeated message that com.android.phone has stopped and the quick settings bar displayed that i had no sim card in. so i tried reflashing, and the same problem. i redownloaded and reflashed... same problem.
so, i went into twrp and performed a full wipe, thinking that i'd push a new zip using twrp's mount function. the problem is, when i went to mount, no drive appeared on my computer. and when i went to fastboot to flash it manually, fastboot said that 'Image is not a boot image' . the same thing happens whenever i try to re-flash recovery as well. so how can i get an os back on the system if fastboot won't cooperate and twrp is essentially useless?
tldr; no os on oneplus one, fastboot wont flash boot image, twrp mount and twrp adb wont do anything. What do?
ItsDeadEnd said:
so, i recently updated my oneplus one from cm11 to cm12.1 and when cm12 loaded in, i got a repeated message that com.android.phone has stopped and the quick settings bar displayed that i had no sim card in. so i tried reflashing, and the same problem. i redownloaded and reflashed... same problem.
so, i went into twrp and performed a full wipe, thinking that i'd push a new zip using twrp's mount function. the problem is, when i went to mount, no drive appeared on my computer. and when i went to fastboot to flash it manually, fastboot said that 'Image is not a boot image' . the same thing happens whenever i try to re-flash recovery as well. so how can i get an os back on the system if fastboot won't cooperate and twrp is essentially useless?
tldr; no os on oneplus one, fastboot wont flash boot image, twrp mount and twrp adb wont do anything. What do?
Click to expand...
Click to collapse
What's the exact command you're using with fastboot? Are you only attempting to flash the boot.img? If so, why only that?
Heisenberg said:
What's the exact command you're using with fastboot? Are you only attempting to flash the boot.img? If so, why only that?
Click to expand...
Click to collapse
I am using "fastboot flash boot [zip]" i also tried "fastboot update [zip]", neither of which worked
ItsDeadEnd said:
I am using "fastboot flash boot [zip]" i also tried "fastboot update [zip]", neither of which worked
Click to expand...
Click to collapse
You didn't answer my question, why are you giving that command? There are a dozen or so commands that you're meant to give when flashing with fastboot. The only time you use that command is when you're just trying to flash a kernel.
Heisenberg said:
You didn't answer my question, why are you giving that command? There are a dozen or so commands that you're meant to give when flashing with fastboot. The only time you use that command is when you're just trying to flash a kernel.
Click to expand...
Click to collapse
what commands would you suggest i do then? because those are the only things i used other than the wipe command
ItsDeadEnd said:
what commands would you suggest i do then? because those are the only things i used other than the wipe command
Click to expand...
Click to collapse
Well it depends on what you're trying to do. As I said, the "fastboot flash boot boot.img" command will only flash a kernel. You really shouldn't be messing around with fastboot if you don't actually know what you're doing, that's how phones get bricked. Go to my guide and follow the instructions in section 8:
http://forum.xda-developers.com/showthread.php?t=2839471
[SOLVED]
apparently sometime between me instlling cm11 and installing cm12, my oem got re-locked. which prevented me from flashing anything new.
i ran:
fastboot oem unlock
and fastboot flash boot boot.img
and voila
help thread for those with the same problem
http://forum.xda-developers.com/show....php?t=2839471
thank you for the help!

[ROM][STOCK][TWRP][27/06/18]TA-1060 Stock Oreo 8.1

Code:
Warning! any damage done to your device is not my fault, use at your own risk!
This zip should be used mainly if you wiped system for some reason and didn't back up, its TA-1060 May patch system image + kernel + vendor files
Unlocked bootloader required!
TWRP
1. Boot into TWRP
2. Format /data partition in TWRP
3. Use 'adb push ta_1060_oreo_may_18.zip /sdcard/' in windows/linux/mac
4. Go to sdcard in TWRP and flash ta_1060_oreo_may_18.zip
5. Reboot to bootloader
6. use 'fastboot flash recovery recovery.bin' (Link bellow)
7. Optional: fastboot oem lock
8. reboot
9. on boot you will get encryption, click on the reset button when android loads
10. You will reboot into recovery then back into system, done
Fastboot
1. Extract zip file
2. flash system.img, boot.img, vendor.img in fastboot
3. fastboot reboot
Links:
Stock ROM zip May
Recovery image
Good luck
XDA:DevDB Information
[ROM][STOCK][TWRP][27/06/18]TA-1060 Stock Oreo 8.1, ROM for the Nokia 1
Contributors
sooti
ROM OS Version: 8.x Oreo
Version Information
Status: Stable
Created 2018-06-27
Last Updated 2018-06-27
So we can flash either through TWRP or Fastboot right?
Zeenat11 said:
So we can flash either through TWRP or Fastboot right?
Click to expand...
Click to collapse
I haven't tested fastboot but it should work. TWRP works 100%
Thank you very much, you are a life saver!!
I was stuck in a TWRP loop.
I tried flashing through TWRP but it didn't work but the fastboot method worked like a charm!
My phone is running again.
Thank you very much.
Is there any userdata.img available?
alexstarc said:
Thank you very much.
Is there any userdata.img available?
Click to expand...
Click to collapse
Nope but do you really need it? just format in fastboot or TWRP.
sooti said:
Nope but do you really need it? just format in fastboot or TWRP.
Click to expand...
Click to collapse
For some reason on my unlocked nokia 1 it started to ask password after flash and boot and gkeyboard always crashes on boot. So, I thought flashing fresh userdata might help.
alexstarc said:
For some reason on my unlocked nokia 1 it started to ask password after flash and boot and gkeyboard always crashes on boot. So, I thought flashing fresh userdata might help.
Click to expand...
Click to collapse
I wrote in the instructions...
If you get a password just enter a random one, then it will ask you to wipe the device, click ok and it will reboot to recovery and then wipe userdata and boot fine.
just make sure you flash the recovery.bin and not twrp before you wipe
alexstarc said:
For some reason on my unlocked nokia 1 it started to ask password after flash and boot and gkeyboard always crashes on boot. So, I thought flashing fresh userdata might help.
Click to expand...
Click to collapse
Same happened to me. I solved it by a hard reset via the stock recovery.
Make sure you flash the recovery.bin like Sooti said.
Wiping through twrp doesn't work.
Nice, working twrp for Nokia 1.
I buyed this phone today. Waiting for customs
A little warning.
It looks like the recovery.bin I took from another nokia 1 device doesn't match the checksum check which causes a failed during ota updates, please only flash this rom if you soft bricked your device.
If anyone can get me TA-1060 stock recovery image that should solve it. for now you can't update the phone until a fix is found
I have Nokia Ta 1066. Will this rom work on mine? Also I read somewhere Ta 1060 is single sim variant. What about the second sim?
Has anyone with TA 1066 tried it?
Thanks. Both methods work fine. Don't ask how I found out.....
Can you share how you managed to backup stock recovery file. Maybe after all the steps above we can flash our own device recovery to make ota work again...
coolboyforeva said:
Can you share how you managed to backup stock recovery file. Maybe after all the steps above we can flash our own device recovery to make ota work again...
Click to expand...
Click to collapse
I don't have stock recovery from our device i have from another variant of Nokia 1
Hey guys i have a TA-1056 and after unlocking bootloader and flashing TWRP it booted to recovery and came up encrypted, after looking around the only solution was to format data, afterwards when rebooting it always boots to recovery, i tried flashing this zip and i get the same issue and i can't find the stock ROM for the 1056 anywhere online, can anyone help me out? i really appreciate it
Kurajmo said:
Nice, working twrp for Nokia 1.
I buyed this phone today. Waiting for customs
Click to expand...
Click to collapse
got any custom roms?
Does Nokia 1 support DT2W?
Sir, is that possible to get a stock rom of TA 1056 ?
I have searched everywhere but whole thing available over net just left my phone bricked. All i need is a working rom source. Even if that’s a custom rom too to flash via sp flash tool. Thanks in advance
Can any please repost the firmware , the link isn't working

[SOLVED] Asking Experts for Solving Bootloop Nokia 8

So, I want to say that my Nokia 8 TA-1004 is having Bootloop. This happens very occasionally and randomly. It just attacks unexpected. I can't see what is the problem or what's the source of it. Thankfully, I have the logcat file. However, I do not understand what was the main cause. So please, I am asking the experts in here to help me identify the source of this error.
The Bootloop just boot like 4-5 times and then stopped Bootloop or sometimes just go straight to DOWNLOAD MODE and I had to restart manually. After that, i was able to gointo system like exploring like usual, and then it happens again. Sometimes not opening the app also happens. Repeat until you gets the nerve.
The phones status is rooted with magisk and unlocked bootloader but no twrp yet. Also, I am at 4.88B SP01 June,01 patch. If you are telling me that the root is the cause, then it is unlikely since it has been weeks since I had it rooted but the problem just came these recently.
Once again, I ask for the help of forumers here. I want to at least enjoy my phone that I love. I dont really want to sell the phone anymore.
Here's the link of logcat:
https://www16.zippyshare.com/v/2W0SVK8t/file.html
I promise. No viruses. Thank you
Hey, I suspect that this problem could be fixed by flashing original bootloader image.
I assume you have flashed an unsuitable image and I think you are using an unlocked bootloader, that's why you are facing this problem.
error748 said:
Hey, I suspect that this problem could be fixed by flashing original bootloader image.
I assume you have flashed an unsuitable image and I think you are using an unlocked bootloader, that's why you are facing this problem.
Click to expand...
Click to collapse
Do you mean flashing original Boot.img? As we know, to gain root, we need to flash patched boot.img with magisk. Do you mean this kind of issue? I notice the problem is in Android System. It says failed to load as data may corrupt. Google is also not responding and Google play services.
Unlocked Bootloader isnt the issue. But, I do think image is unsuitable. However, I have patched boot.img as the same as the version of Nokia. Is such thing still happen?
godofknife said:
Do you mean flashing original Boot.img? As we know, to gain root, we need to flash patched boot.img with magisk. Do you mean this kind of issue? I notice the problem is in Android System. It says failed to load as data may corrupt. Google is also not responding and Google play services.
Unlocked Bootloader isnt the issue. But, I do think image is unsuitable. However, I have patched boot.img as the same as the version of Nokia. Is such thing still happen?
Click to expand...
Click to collapse
now do one thing. flash stock boot img (will break wifi), after that download official twrp and boot into it. then from twrp flash twrp zip file provided with official boot img. reboot to twrp and flash latest magisk beta. (you will have wifi working after this)
This way you will get root and stable system.. no need to flash patched boot img anymore..
Make sure to revert back to stock boot first before flashing twrp..
sumitinhome said:
now do one thing. flash stock boot img (will break wifi), after that download official twrp and boot into it. then from twrp flash twrp zip file provided with official boot img. reboot to twrp and flash latest magisk beta. (you will have wifi working after this)
This way you will get root and stable system.. no need to flash patched boot img anymore..
Make sure to revert back to stock boot first before flashing twrp..
Click to expand...
Click to collapse
sumitinhome, I just did factory reset. The problem STILL HAPPENS. It means it wasn't any of the app but from the system or the boot.img itself perhaps.
With no way to enter the system, how do i get into the fastboot now? By pressing volume down + Power (That shows DOWNLOAD MODE)? Is that the fastboot? Then yet again, the only issue that I have is the exactly driver for Nokia 8. I found lots of drivers in the internet but I am quite confused which one is the real driver of Nokia 8 to be able to detect in fastboot and ADB. Do you have a driver installer?
Assuming if you will have given Nokia driver and I managed to get into fastboot mode by using hard key, do I type this command?
fastboot flash boot.img? Or is it wrong command?
Thank you and sorry if i ask too many questions.
godofknife said:
sumitinhome, I just did factory reset. The problem STILL HAPPENS. It means it wasn't any of the app but from the system or the boot.img itself perhaps.
With no way to enter the system, how do i get into the fastboot now? By pressing volume down + Power (That shows DOWNLOAD MODE)? Is that the fastboot? Then yet again, the only issue that I have is the exactly driver for Nokia 8. I found lots of drivers in the internet but I am quite confused which one is the real driver of Nokia 8 to be able to detect in fastboot and ADB. Do you have a driver installer?
Assuming if you will have given Nokia driver and I managed to get into fastboot mode by using hard key, do I type this command?
fastboot flash boot.img? Or is it wrong command?
Thank you and sorry if i ask too many questions.
Click to expand...
Click to collapse
1. download mode is fastboot mode.. no difference there.
2. unfortunately i dont have installer for drivers but you can find it if you browse nokia section in this forum.
3. you will need command 'fastboot flash boot_a boot.img' and 'fastboot flash boot_b boot.img' to flash stock boot img to your phone..
4. if you wish to install twrp then you will need to follow instructions from following thread
https://forum.xda-developers.com/nokia-8/development/official-twrp-nb1-t3832232
Make sure to read the thread and comments carefully before doing anything.
Hope it helped.
sumitinhome said:
1. download mode is fastboot mode.. no difference there.
2. unfortunately i dont have installer for drivers but you can find it if you browse nokia section in this forum.
3. you will need command 'fastboot flash boot_a boot.img' and 'fastboot flash boot_b boot.img' to flash stock boot img to your phone..
4. if you wish to install twrp then you will need to follow instructions from following thread
https://forum.xda-developers.com/nokia-8/development/official-twrp-nb1-t3832232
Make sure to read the thread and comments carefully before doing anything.
Hope it helped.
Click to expand...
Click to collapse
Hey there, thanks for the fast respond. It greatly helps.
Alright, I am waiting for the driver. Also, I checked anywhere in the forum section of Nokia 8 but none of them have 00WW_4.88bSP01 version of stock boot.img which is 1st June 2018 patch.
Do you happen to have had it? Is it okay if i ask for it? Thank you.
godofknife said:
Hey there, thanks for the fast respond. It greatly helps.
Alright, I am waiting for the driver. Also, I checked anywhere in the forum section of Nokia 8 but none of them have 00WW_4.88bSP01 version of stock boot.img which is 1st June 2018 patch.
Do you happen to have had it? Is it okay if i ask for it? Thank you.
Click to expand...
Click to collapse
I have it. Wait sometime.. i will upload it on gdrive and share you link
sumitinhome said:
I have it. Wait sometime.. i will upload it on gdrive and share you link
Click to expand...
Click to collapse
Yes sumitinhome, thank you so much. Try make it one upload with the driver. All that and I will do the fastboot command asap..
Oh yeah, one verify question. When the bootloader is unlocked, updating the newest ROM after august will lock the bootloader again or not? Some say yes, some say no. A member name hikari stated no, we are unaffected. But, some say relock again. Which is true?
godofknife said:
Yes sumitinhome, thank you so much. Try make it one upload with the driver. All that and I will do the fastboot command asap..
Oh yeah, one verify question. When the bootloader is unlocked, updating the newest ROM after august will lock the bootloader again or not? Some say yes, some say no. A member name hikari stated no, we are unaffected. But, some say relock again. Which is true?
Click to expand...
Click to collapse
we are unaffected.. and i have only boot img unfortunately.. i dont have drivers..
and dont update to august yet.. let pie come and update to pie directly then..
---------- Post added at 02:10 PM ---------- Previous post was at 02:04 PM ----------
godofknife said:
Hey there, thanks for the fast respond. It greatly helps.
Alright, I am waiting for the driver. Also, I checked anywhere in the forum section of Nokia 8 but none of them have 00WW_4.88bSP01 version of stock boot.img which is 1st June 2018 patch.
Do you happen to have had it? Is it okay if i ask for it? Thank you.
Click to expand...
Click to collapse
here is boot img
https://drive.google.com/file/d/1XtxIWQdn9dbtt1tJydM_6fFhslRZfozr/view?usp=drivesdk
sumitinhome said:
we are unaffected.. and i have only boot img unfortunately.. i dont have drivers..
and dont update to august yet.. let pie come and update to pie directly then..
---------- Post added at 02:10 PM ---------- Previous post was at 02:04 PM ----------
here is boot img
https://drive.google.com/file/d/1XtxIWQdn9dbtt1tJydM_6fFhslRZfozr/view?usp=drivesdk
Click to expand...
Click to collapse
Ah ha, thank you very much. I just need one more requirement. The driver. Honestly, there are so many drivers for Nokia 8 and none of them seems to work with my device detection. There's also type F, M driver..... Seriously confusing.
@sumitinhome, you are awesome. I must say thank you for helping me. Phone is no longer in bootloop state. However, I may require just little more help. I have also installed TWRP and succeeded. The problem is that the WIFI breaks. I went ahead and installed Magisk using zip one like you mentioned the steps in installing TWRP. It still doesn't solve the WIFI problem. How could this be? (Do note that I did not use fastboot flash twrp.img. I use fastboot boot twrp.img instead)
I also have other questions. During MTP in TWRP, I saw the partition drive; The internal storage and USB-OTG as given in picture below. What is the second drive meaning?
Second question is why is Magisk manager only showing Installed version v17.1? And the button is just uninstalled. I recall there are other buttons and feature like Safety Net and advance settings.
Finally, I want to know how do we get into recovery mode without using ADB command everytime? I tried pressing Volume UP + Power. But, it didn't go into TWRP. It just goes normal reboot.
Thank you so much once again.
Pic: https://ibb.co/jFtHPp
godofknife said:
@sumitinhome, you are awesome. I must say thank you for helping me. Phone is no longer in bootloop state. However, I may require just little more help. I have also installed TWRP and succeeded. The problem is that the WIFI breaks. I went ahead and installed Magisk using zip one like you mentioned the steps in installing TWRP. It still doesn't solve the WIFI problem. How could this be? (Do note that I did not use fastboot flash twrp.img. I use fastboot boot twrp.img instead)
I also have other questions. During MTP in TWRP, I saw the partition drive; The internal storage and USB-OTG as given in picture below. What is the second drive meaning?
Second question is why is Magisk manager only showing Installed version v17.1? And the button is just uninstalled. I recall there are other buttons and feature like Safety Net and advance settings.
Finally, I want to know how do we get into recovery mode without using ADB command everytime? I tried pressing Volume UP + Power. But, it didn't go into TWRP. It just goes normal reboot.
Thank you so much once again.
Pic: https://ibb.co/jFtHPp
Click to expand...
Click to collapse
Do one thing.
Flash stock boot img again. and after that do the following
1) Full charge your phone.
2) Get a MicroSD card ( 8 or 16 GB )
3) Download this - https://mega.nz/#!mRZHDaJI!3KrT2F0ZE...KQux5EvPWVGI_4
4) Copy it to SDCARD from your PC.
5) Put the SD card in ur mobile.
6) Go to recovery
7) Select update, from SDCARD - start flashing by pressing power button.
This will get back wifi. after that you can update to latest august patch too if you want and then flash twrp.
And about that OTG thing, don't worry twrp is being updated it will be fixed very soon. People are working on it.
sumitinhome said:
Do one thing.
Flash stock boot img again. and after that do the following
1) Full charge your phone.
2) Get a MicroSD card ( 8 or 16 GB )
3) Download this - https://mega.nz/#!mRZHDaJI!3KrT2F0ZE...KQux5EvPWVGI_4
4) Copy it to SDCARD from your PC.
5) Put the SD card in ur mobile.
6) Go to recovery
7) Select update, from SDCARD - start flashing by pressing power button.
This will get back wifi. after that you can update to latest august patch too if you want and then flash twrp.
And about that OTG thing, don't worry twrp is being updated it will be fixed very soon. People are working on it.
Click to expand...
Click to collapse
I see. Number 3 has Encryption. Also, before i can do this, i have a new problem. I was so stupid. I accidentally format everything including the system which leaves me NO OS. I should have just wipe data (factory reset). Not advanced wipe. Can I still install Stock rom (any version) with twrp? What do i do?
@sumitinhome, also I forgot to mention. SD Card and Internal storage is not detected in TWRP Mode. I checked in my PC. ADB Sideload is also fail. Is this the end of my phone fate?
EDITED: Never mind. I was using the obsolete TWRP Version. I updated to the latest one and SD Card and internal is detected in TWRP once again.
godofknife said:
@sumitinhome, also I forgot to mention. SD Card and Internal storage is not detected in TWRP Mode. I checked in my PC. ADB Sideload is also fail. Is this the end of my phone fate?
EDITED: Never mind. I was using the obsolete TWRP Version. I updated to the latest one and SD Card and internal is detected in TWRP once again.
Click to expand...
Click to collapse
well done
sumitinhome said:
well done
Click to expand...
Click to collapse
Thank you.
godofknife said:
I see. Number 3 has Encryption. Also, before i can do this, i have a new problem. I was so stupid. I accidentally format everything including the system which leaves me NO OS. I should have just wipe data (factory reset). Not advanced wipe. Can I still install Stock rom (any version) with twrp? What do i do?
Click to expand...
Click to collapse
@sumitinhome, how about this? I still have the issue. NO OS is running.
godofknife said:
Thank you.
@sumitinhome, how about this? I still have the issue. NO OS is running.
Click to expand...
Click to collapse
told you flash stock boot img again.. and use the above method i mention to flash firmware..
Do one thing.
Flash stock boot img again. and after that do the following
1) Full charge your phone.
2) Get a MicroSD card ( 8 or 16 GB )
3) Download this - https://mega.nz/#!mRZHDaJI!3KrT2F0ZE...KQux5EvPWVGI_4
4) Copy it to SDCARD from your PC.
5) Put the SD card in ur mobile.
6) Go to recovery
7) Select update, from SDCARD - start flashing by pressing power button
sumitinhome said:
told you flash stock boot img again.. and use the above method i mention to flash firmware..
Do one thing.
Flash stock boot img again. and after that do the following
1) Full charge your phone.
2) Get a MicroSD card ( 8 or 16 GB )
3) Download this - https://mega.nz/#!mRZHDaJI!3KrT2F0ZE...KQux5EvPWVGI_4
4) Copy it to SDCARD from your PC.
5) Put the SD card in ur mobile.
6) Go to recovery
7) Select update, from SDCARD - start flashing by pressing power button
Click to expand...
Click to collapse
That was also the solution for NO OS? Wow. Thanks. Um, the download link need Decryption key. Do you happen to have it?
godofknife said:
That was also the solution for NO OS? Wow. Thanks. Um, the download link need Decryption key. Do you happen to have it?
Click to expand...
Click to collapse
no it doesn't need any key

Categories

Resources