Database Info

(HELP) LG GFlex 2 LS996 Bootloop in MINI OS after stock firmware flash

Hi it's the first time i post on XDA, i allways found what i need but this time...no solution.
i have an LG LS996 5.0.1 rooted after not possible to do an update.
i unroot the phone, factory reset, update....same resulte
i try to install the stock firmware. XDA Source tot file.....etc
the phone is stock on MINI OS screen for about 1 minute and reboot in the same screen.
i go to sprint, they don't want to replace the phone because the miniOS boot is not lg Bootloader and the unsurance wante me to pay 200$
to get a new one.
any help please.

lambo640 said:
Hi it's the first time i post on XDA, i allways found what i need but this time...no solution.
i have an LG LS996 5.0.1 rooted after not possible to do an update.
i unroot the phone, factory reset, update....same resulte
i try to install the stock firmware. XDA Source tot file.....etc
the phone is stock on MINI OS screen for about 1 minute and reboot in the same screen.
i go to sprint, they don't want to replace the phone because the miniOS boot is not lg Bootloader and the unsurance wante me to pay 200$
to get a new one.
any help please.
Click to expand...
Click to collapse
check this out http://forum.xda-developers.com/showpost.php?p=61530688&postcount=31

Google~Android said:
check this out http://forum.xda-developers.com/showpost.php?p=61530688&postcount=31
Click to expand...
Click to collapse
Big thank you.
worked very well.
my phone is alive again.

lambo640 said:
Big thank you.
worked very well.
my phone is alive again.
Click to expand...
Click to collapse
no issue... thats what xda is for....now its up to you to help someone else if its within ur knowledge and always hit thanks button... it makes ppl even more helpful cheers to you..ive been in ur shoes...it such a relief once its workin

yay my post was reffered too as well glad it worked, but also give stank0 credit too if it wasnt for him i wouldnt of had fixed it

MasterSe7en said:
yay my post was reffered too as well glad it worked, but also give stank0 credit too if it wasnt for him i wouldnt of had fixed it
Click to expand...
Click to collapse
i have a question for you...i have g3 and i can upgrade, dowgrade whenever i please with kdz witout a hitch or hint of bricking it or getting qhusb bulk 9008?? is it that much more complicated?? is this tougher to downgrade?? why do ppl brick? thanks.

Google~Android said:
i have a question for you...i have g3 and i can upgrade, dowgrade whenever i please with kdz witout a hitch or hint of bricking it or getting qhusb bulk 9008?? is it that much more complicated?? is this tougher to downgrade?? why do ppl brick? thanks.
Click to expand...
Click to collapse
ok ill explain the best i can for you.
Lets say for example that the bootloader was unlocked for the flex 2, if we downgraded with the current method that I did, then youll end up with a brick BECAUSE...after the 5.1.1 update, the bootloader was also updated, but if we had an unlocked bootloader, it would be no problem because then you can get right into fastboot since the bootloader is unlocked. however the reason my flex 2 bricked was because you cant downgrade bootloaders unless there is a specific way to do so, and if its unlocked...well since mine wasnt on the flex 2, when i flashed the TOT from ZV5 OVER a ZV6 bootloader, the rest of the partitions flashed, except for the bootloader end of it because it returned a "Version on phone is currently newer than the one being flashed" and declined the flash, since ZV5 wasnt build around the ZV6 bootloader, it doesnt know how or what to boot..
thats just a simple version, going into specifics is the Devs department, but in lamen terms, thats whats going on..if we had an unlocked bootloader it wouldnt be an issue because we could flash an older bootloader without the phone rejecting it. but once root is achieved on 5.1.1 then there will be a way to restore the FLex 2, the G3 you have although it may not have an unlocked bootloader, its been out for long enough to where exploits have been discovered, but if youre referring to upgrading and downgrading on Custom Roms, thats not the same thing, its only for official TOT's and KDZs or Official LG Firmware.
it would be like trying to flash a sprint variant with a tmobile rom....its just not built for it, its like having a Ford mustang with a V6 and trying to put a V8 motor in it without changing the computer/wire harness etc. it will fit...but it just wont work.
did that help for you to understand?

MasterSe7en said:
ok ill explain the best i can for you.
Lets say for example that the bootloader was unlocked for the flex 2, if we downgraded with the current method that I did, then youll end up with a brick BECAUSE...after the 5.1.1 update, the bootloader was also updated, but if we had an unlocked bootloader, it would be no problem because then you can get right into fastboot since the bootloader is unlocked. however the reason my flex 2 bricked was because you cant downgrade bootloaders unless there is a specific way to do so, and if its unlocked...well since mine wasnt on the flex 2, when i flashed the TOT from ZV5 OVER a ZV6 bootloader, the rest of the partitions flashed, except for the bootloader end of it because it returned a "Version on phone is currently newer than the one being flashed" and declined the flash, since ZV5 wasnt build around the ZV6 bootloader, it doesnt know how or what to boot..
thats just a simple version, going into specifics is the Devs department, but in lamen terms, thats whats going on..if we had an unlocked bootloader it wouldnt be an issue because we could flash an older bootloader without the phone rejecting it. but once root is achieved on 5.1.1 then there will be a way to restore the FLex 2, the G3 you have although it may not have an unlocked bootloader, its been out for long enough to where exploits have been discovered, but if youre referring to upgrading and downgrading on Custom Roms, thats not the same thing, its only for official TOT's and KDZs or Official LG Firmware.
it would be like trying to flash a sprint variant with a tmobile rom....its just not built for it, its like having a Ford mustang with a V6 and trying to put a V8 motor in it without changing the computer/wire harness etc. it will fit...but it just wont work.
did that help for you to understand?
Click to expand...
Click to collapse
Ya i understand that part... Ive dealt with bricked phones... Ive recovered all but one.... Why are some able to downgrade though... In another thread soomeones says hes gone back aand forth a couplw times... Thats why i was confused..

So there's no way to root the Sprint lg g flex 2 (ls996) once it's on 5.1.1? Because we can't downgrade right? Wish I knew this before I bought one off Swappa.
Sent from my 831C using Tapatalk

Toyeboy said:
So there's no way to root the Sprint lg g flex 2 (ls996) once it's on 5.1.1? Because we can't downgrade right? Wish I knew this before I bought one off Swappa.
Sent from my 831C using Tapatalk
Click to expand...
Click to collapse
Be patient it will come with time trust me
Google~Android said:
Ya i understand that part... Ive dealt with bricked phones... Ive recovered all but one.... Why are some able to downgrade though... In another thread soomeones says hes gone back aand forth a couplw times... Thats why i was confused..
Click to expand...
Click to collapse
Same here ga just takes time, someone will do it, maybe even me time will tell but I need to tape restore the laf partition somehow, so I need a dump from a zv6

MasterSe7en said:
Be patient it will come with time trust me
Click to expand...
Click to collapse
Yeah I don't regret buying the g flex 2 considering I got it for $260 on Swappa. Really happy I got top of the line hardware for this price. I'm sure root will come or maybe a way to unlock bootloader so we can downgrade.
Sent from my 831C using Tapatalk

MasterSe7en said:
Be patient it will come with time trust me
Same here ga just takes time, someone will do it, maybe even me time will tell but I need to tape restore the laf partition somehow, so I need a dump from a zv6
Click to expand...
Click to collapse
My flex 2 us995 was stuck at logo after alot of search i didnt find any thing but ls996 tot. So itried on it and after alot of tries i managed to get rid of this issue. Now i am using sprint ls996 5.0.1 over us995. I m gettting notification of 5.1 sprint update but after downloading the update i am unable to flash it. It fails in recovery. I manually downloaded update and tried to flash it but no success... Any solution to it.

muzammil457 said:
My flex 2 us995 was stuck at logo after alot of search i didnt find any thing but ls996 tot. So itried on it and after alot of tries i managed to get rid of this issue. Now i am using sprint ls996 5.0.1 over us995. I m gettting notification of 5.1 sprint update but after downloading the update i am unable to flash it. It fails in recovery. I manually downloaded update and tried to flash it but no success... Any solution to it.
Click to expand...
Click to collapse
are you rooted or completely stock?

MasterSe7en said:
are you rooted or completely stock?
Click to expand...
Click to collapse
I was rooted earliar via kingo root. Then i unroot it from supersu menu. I checked via root checker app it says no proper root found. May be this is the issue...do i need properly unrooted phone for 5.1 update??
How can i unroot it completly without flashing again...

join me on hangout +919999964499 because my g flex2 also got stuck in minios.
The process is a bit confusing so you need to contact me.
lambo640 said:
Hi it's the first time i post on XDA, i allways found what i need but this time...no solution.
i have an LG LS996 5.0.1 rooted after not possible to do an update.
i unroot the phone, factory reset, update....same resulte
i try to install the stock firmware. XDA Source tot file.....etc
the phone is stock on MINI OS screen for about 1 minute and reboot in the same screen.
i go to sprint, they don't want to replace the phone because the miniOS boot is not lg Bootloader and the unsurance wante me to pay 200$
to get a new one.
any help please.
Click to expand...
Click to collapse

shubhdixit2241 said:
The process is a bit confusing so you need to contact me.
Click to expand...
Click to collapse
could you give instructions? no button combo gets me out of it???
edit..i dnt have google hangouts...

How to unroot Sprint LG G Flex 2 on ZV6?

Ok so I purchased a brand new Sprint G Flex 2 on ebay http://www.ebay.com/itm/221950977883 and to my surprise it was already rooted with firmware ZV6 so now I can't take OTA updates since it stops updating halfway through the update and the green Android guy lies on his back with the "error" message. I already did the full unroot method using SuperSU but still a no go. Before I send this phone back to the seller I want to make sure if there is any hope in fixing this issue and allowing the updates. I also downloaded the root checker app to see if root was gone and it states root is not configured correctly. Not sure what that means as I used SuperSu to fully unroot. Any help would be appreciated as I only have 14 days to return this device to seller but I do not want it rooted as it prevents updates through Sprint. Thanks.

Update with lg windows app
Wysłane z mojego LG-H955 przy użyciu Tapatalka

skretch said:
Update with lg windows app
Wysłane z mojego LG-H955 przy użyciu Tapatalka
Click to expand...
Click to collapse
Thanks is there a forum here with instructions to use the LG Windows app. I just want to make sure I do not brick this device because then I can't return it in case things don't work out.

Download lg pc suite connect your flex 2 to usb instal drivers
Go to mobile devices-->mobile devices software upgrade
Wysłane z mojego LG-H955 przy użyciu Tapatalka

UCLA1 said:
Ok so I purchased a brand new Sprint G Flex 2 on ebay http://www.ebay.com/itm/221950977883 and to my surprise it was already rooted with firmware ZV6 so now I can't take OTA updates since it stops updating halfway through the update and the green Android guy lies on his back with the "error" message. I already did the full unroot method using SuperSU but still a no go. Before I send this phone back to the seller I want to make sure if there is any hope in fixing this issue and allowing the updates. I also downloaded the root checker app to see if root was gone and it states root is not configured correctly. Not sure what that means as I used SuperSu to fully unroot. Any help would be appreciated as I only have 14 days to return this device to seller but I do not want it rooted as it prevents updates through Sprint. Thanks.
Click to expand...
Click to collapse
Download the version you have, DO NOT I REPEAT DO NOT DOWNLOAD ANY VERSION THAT ISNT THE ONE YOU ARE USING YOU WILL BRICK. ZV6 for ZV6.
Here are the stock image files uploaded by me.
Follow this guide its the root guide but its the fastest method to unroot using stock images (same procedure). Good luck! :good:

UCLA1 said:
Ok so I purchased a brand new Sprint G Flex 2 on ebay http://www.ebay.com/itm/221950977883 and to my surprise it was already rooted with firmware ZV6 so now I can't take OTA updates since it stops updating halfway through the update and the green Android guy lies on his back with the "error" message. I already did the full unroot method using SuperSU but still a no go. Before I send this phone back to the seller I want to make sure if there is any hope in fixing this issue and allowing the updates. I also downloaded the root checker app to see if root was gone and it states root is not configured correctly. Not sure what that means as I used SuperSu to fully unroot. Any help would be appreciated as I only have 14 days to return this device to seller but I do not want it rooted as it prevents updates through Sprint. Thanks.
Click to expand...
Click to collapse
Those who want to unroot and go back to stock ZV6 (so they can get the OTA ZV9 update) should be able to use these "dd" flashing instructions:
http://forum.xda-developers.com/g-fl...5-1-1-t3169212
along with the stock ZV6 firmware image from here:
http://forum.xda-developers.com/g-fl...k-img-t3217089
However, you will not only lose root. You will also lose the SIM carrier unlock. After reverting your phone to stock, your phone will be carrier locked to Sprint. That's because carrier unlocking is done by altering some "node db" system files.
After applying the OTA update to ZV9, you will have to redo both the carrier unlocking and the rooting of your phone. It's doable, but it's just something to keep in mind.

wtang said:
Those who want to unroot and go back to stock ZV6 (so they can get the OTA ZV9 update) should be able to use these "dd" flashing instructions:
http://forum.xda-developers.com/g-fl...5-1-1-t3169212
along with the stock ZV6 firmware image from here:
http://forum.xda-developers.com/g-fl...k-img-t3217089
However, you will not only lose root. You will also lose the SIM carrier unlock. After reverting your phone to stock, your phone will be carrier locked to Sprint. That's because carrier unlocking is done by altering some "node db" system files.
After applying the OTA update to ZV9, you will have to redo both the carrier unlocking and the rooting of your phone. It's doable, but it's just something to keep in mind.
Click to expand...
Click to collapse
Thanks for the info. I have one question though. I did the unroot method using SuperSU and was wondering if that will not be enough to get OTA updates once I get my Sprint SIM card installed. From my knowledge if the system files were messed with OTA updates won't work correct and in this case you stated that carrier unlocking involves altering node db system files. So even if I did the full unroot method using SuperSU the altered files would remain correct?

UCLA1 said:
Thanks for the info. I have one question though. I did the unroot method using SuperSU and was wondering if that will not be enough to get OTA updates once I get my Sprint SIM card installed. From my knowledge if the system files were messed with OTA updates won't work correct and in this case you stated that carrier unlocking involves altering node db system files. So even if I did the full unroot method using SuperSU the altered files would remain correct?
Click to expand...
Click to collapse
I believe you are correct. Since the eBay seller altered some system files (that's probably why he rooted all these phones and installed SuperSU) to achieve the carrier unlocking, the OTA update for ZV9 is failing. Even if you unroot and delete all traces of SuperSU, I think the OTA will still fail. The update script probably does some sort of checksum verification of all the Android OS files before proceeding.
Also, I don't think you need a Sprint SIM in order to do the OTA update. I believe the OTA comes from LG's servers, not from Sprint. I've heard of people getting the OTA update even if they are using an AT&T or T-Mobile SIM. As long as your phone has data (cellular or Wifi) I think the OTA will download. But as you've found out, it won't install unless you go back to stock.

Alex_XV6700 said:
Download the version you have, DO NOT I REPEAT DO NOT DOWNLOAD ANY VERSION THAT ISNT THE ONE YOU ARE USING YOU WILL BRICK. ZV6 for ZV6.
Here are the stock image files uploaded by me.
Follow this guide its the root guide but its the fastest method to unroot using stock images (same procedure). Good luck! :good:
Click to expand...
Click to collapse
Thank you for the links I will give this a shot and hopefully I do not brick my device as the instructions are quite long lol. I will make sure I use the ZV6 as that is what I have on my device.

UCLA1 said:
Thank you for the links I will give this a shot and hopefully I do not brick my device as the instructions are quite long lol. I will make sure I use the ZV6 as that is what I have on my device.
Click to expand...
Click to collapse
From the guide you just have to follow
1. Download and extract the stock img.
2. Transfer it to the root of your internal sdcard (images are usually named ZV6system.img) avoid moving the complete zip.
3. Put your phone in download mode (you can figure this out)
4. Use the dd command for your variant in your case LS996, just change the name of the ¨rootedsystem.img¨ to the one you downloaded.
Aaaaaaaaaaaand you´re done :good:

Alex_XV6700 said:
From the guide you just have to follow
1. Download and extract the stock img.
2. Transfer it to the root of your internal sdcard (images are usually named ZV6system.img) avoid moving the complete zip.
3. Put your phone in download mode (you can figure this out)
4. Use the dd command for your variant in your case LS996, just change the name of the ¨rootedsystem.img¨ to the one you downloaded.
Aaaaaaaaaaaand you´re done :good:
Click to expand...
Click to collapse
I did everything in the guide and phone even rebooted when I typed LEAVE after the "#" prompt but I still can't take OTA and Android guy falls on back with "error" message. I have another question when I click in the status section in the About phone settings and I scroll down to Brand it lists Chameleon. Is this normal?

Did you download the stock image from the forum I made?
Cause if you flashed your current system.img then you flashed the rooted one.
Make sure you are using the Send_command on the diag port of your phone if you arent doing this then you wont flash correctly and phone will stay rooted.
And yes, when the phone hasnt been unlocked internationally Chameleon is the ¨Sprint stock way¨

Alex_XV6700 said:
Did you download the stock image from the forum I made?
Cause if you flashed your current system.img then you flashed the rooted one.
Make sure you are using the Send_command on the diag port of your phone if you arent doing this then you wont flash correctly and phone will stay rooted.
And yes, when the phone hasnt been unlocked internationally Chameleon is the ¨Sprint stock way¨
Click to expand...
Click to collapse
I did flash the ZV6 stock image from your forum http://forum.xda-developers.com/g-flex2/general/return-to-stock-ls996-stock-img-t3217089 and I used the send command to port 5 because that is where the Diag port is when I double click the ports.bat file. I actually tried this method twice and I still am not able to update without error. Maybe I do need a SIM card installed and will try it tomorrow when I get my SIM delivered from Sprint. Thanks a lot for the tips though.

UCLA1 said:
I did flash the ZV6 stock image from your forum http://forum.xda-developers.com/g-flex2/general/return-to-stock-ls996-stock-img-t3217089 and I used the send command to port 5 because that is where the Diag port is when I double click the ports.bat file. I actually tried this method twice and I still am not able to update without error. Maybe I do need a SIM card installed and will try it tomorrow when I get my SIM delivered from Sprint. Thanks a lot for the tips though.
Click to expand...
Click to collapse
Thats kind of weird you know, I OTA updated my phone even after international SIM unlocked.
How long does the flash process take? If it takes less than a minute then its not doing things as it should.
Did you enable USB Debugging before flashing?
Have you tried to Factory Reset after flashing the stock ZV6 system.img?

Alex_XV6700 said:
Thats kind of weird you know, I OTA updated my phone even after international SIM unlocked.
How long does the flash process take? If it takes less than a minute then its not doing things as it should.
Did you enable USB Debugging before flashing?
Have you tried to Factory Reset after flashing the stock ZV6 system.img?
Click to expand...
Click to collapse
I do have USB Debugging enabled. The flash process takes around 1 minute and then the # shows up indicating it finished and then I type LEAVE and phone reboots. I even tried the factory reset after flashing it with the stock ZV6 image. This is very interesting but I will wait until tomorrow to make a decision on whether to keep the phone when I insert the SIM and see if that helps any. Thanks Alex for all your help.
I forgot to ask this but do I have to type the commands or is copying and pasting ok.

UCLA1 said:
I do have USB Debugging enabled. The flash process takes around 1 minute and then the # shows up indicating it finished and then I type LEAVE and phone reboots. I even tried the factory reset after flashing it with the stock ZV6 image. This is very interesting but I will wait until tomorrow to make a decision on whether to keep the phone when I insert the SIM and see if that helps any. Thanks Alex for all your help.
I forgot to ask this but do I have to type the commands or is copying and pasting ok.
Click to expand...
Click to collapse
Well it depends on how did you copy/paste the command.
To flash the ZV6system.img it should be like this:
dd if=/data/media/0/ZV6system.img bs=8192 seek=58368 count=522240 of=/dev/block/mmcblk0

Alex_XV6700 said:
Well it depends on how did you copy/paste the command.
To flash the ZV6system.img it should be like this:
dd if=/data/media/0/ZV6system.img bs=8192 seek=58368 count=522240 of=/dev/block/mmcblk0
Click to expand...
Click to collapse
Thanks for your patience with me. Do I have to run both the dump and flash commands as I have only been doing the flash command and maybe that is the problem?
is this how the commands should be typed?
Dump command:
dd if=/dev/block/mmcblk0 bs=8192 skip=58368 count=522240 of=/data/media/0/system.img
Flash command:
dd if=/data/media/0/ZV6system.img bs=8192 seek=58368 count=522240 of=/dev/block/mmcblk0

I'm in a similar boat w/ a slightly different issue. I bought the same phone from the same guy and have not been able to get it to activate on Sprint at all. Well, it "activates" but then it errors on updating the PRL. I have LTE data, but no call ability. It is very strange.
So far I have:
Unrooted via SuperuserSU app that was installed
Taken it to Sprint store and had them do everything they could (while being condescending about buying a phone not from them)
Played with every setting I can find
Factory reset many times at many stages
Flashed to the stock ZV6
Installed 2 OTA updates (now a third is coming through)
And every time, I get a your phone has been activated message, followed by trying to update the PRL and failing, leaving me in the same place I was to begin with. I'll try it again after this latest OTA update I'm getting, but I'm running out of things to try and I'm extremely frustrated lol. Anybody had the same problem? Any ideas? Anything? I don't know if maybe it's just a defective phone... sigh. Thanks in advance for any help!

SteveRepsold said:
I'm in a similar boat w/ a slightly different issue. I bought the same phone from the same guy and have not been able to get it to activate on Sprint at all. Well, it "activates" but then it errors on updating the PRL. I have LTE data, but no call ability. It is very strange.
So far I have:
Unrooted via SuperuserSU app that was installed
Taken it to Sprint store and had them do everything they could (while being condescending about buying a phone not from them)
Played with every setting I can find
Factory reset many times at many stages
Flashed to the stock ZV6
Installed 2 OTA updates (now a third is coming through)
And every time, I get a your phone has been activated message, followed by trying to update the PRL and failing, leaving me in the same place I was to begin with. I'll try it again after this latest OTA update I'm getting, but I'm running out of things to try and I'm extremely frustrated lol. Anybody had the same problem? Any ideas? Anything? I don't know if maybe it's just a defective phone... sigh. Thanks in advance for any help!
Click to expand...
Click to collapse
Did you get a new SIM card from Sprint or did you use an old one because Sprint told me they need to send us one that has been programmed for the LG G Flex 2. On another note when flashed the stock ZV6 image did you send both the dump and flash commands and did you have problems getting the updates before you flashed to stock. Thanks.

UCLA1 said:
Did you get a new SIM card from Sprint or did you use an old one because Sprint told me they need to send us one that has been programmed for the LG G Flex 2. On another note when flashed the stock ZV6 image did you send both the dump and flash commands and did you have problems getting the updates before you flashed to stock. Thanks.
Click to expand...
Click to collapse
I picked up a new one at the Sprint store. I would hope they knew which one to give me haha. I only used the flash command. And yes, I had the same issue as you did with getting the updates before I flashed. No problem with that now, 3 updates later I'm on ZV9. Now if I could just get the phone activated...

Need some guidance

so i have a g flex 2 ls996 i am thinking of installing xposed and as we all know that for now there is no custom recovery for flex 2 but i just cant live without xposed. But i do not want to damage my phone either.
Hence i plan to create the backup plan first which is preparing a stock kdz tot first
this is the link i plan to depend on for backup http://romdienthoai.com/search?search-text=ls996
are these files the correct one?
which one should i install in case of bootloop etc?
I have an unlocked phone and i am using it in pakistan.
will installing these files lock my phone on sprint carrier or anything like that?

Personally I've never seen that site before but I know for a fact that almost all of us use or have used the ZV8 TOT file shared here:
http://storagecow.eu/index.php?dir=Xda/LG+G+Flex+2/Sprint/
No issues with that one for me personally. There are no KDZ files available for the LS996 (the Sprint Flex 2) that I'm aware of, and I hope that sometime we might finally get one. The latest firmware is of course the just released ZVB a few days ago but that's just available as an OTA but the system img file is available now as well (it does contain a new radio.img file that should be flashed as well - I can't get an update.zip to flash properly so I had to do everything manually on my own: flash the ZV8 TOT, then flashed the rooted ZVB system img file (which is also available now), then flashed the radio.img file and I'm good to go without any issues.
I can't speak for anything related to your location (Pakistan) so read up on the details but that ZV8 TOT file I provided a link to should work just fine. If you need or want the ZVB (that's ZV-B and in Bravo which has the security patches and other fixes through May 1st) it's available in one of the other threads, and of course the rooted ZVB is available from yet another thread.
Stuff is all over the place, really, could stand some consolidation I suppose.
Flashing any of these should not affect your /carrier folder on the device - firmware upgrades really don't do anything to that folder so as long as it's there and your phone works, upgrading the firmware should not have any effect on your current cellular service but there are never any absolute guarantees.

br0adband said:
Flashing any of these should not affect your /carrier folder on the device - firmware upgrades really don't do anything to that folder so as long as it's there and your phone works, upgrading the firmware should not have any effect on your current cellular service but there are never any absolute guarantees.
Click to expand...
Click to collapse
Thank you very much for your response.
i guess i'll install the xposed then.

LG V10 AT&T MM Root

This is a thread for the progress of MM root on the AT&T variant of the LG V10. I am working to find a way to root it, even if it is not through a TOT, but a exploit.
I know some of you were wondering about my donate info, and so I decided to go and set up a Paypal if you felt so obliged haha. (Its in my info in my profile)
Right now I am examining a TOT that someone sent me and I will determine if it is corrupted too, or if we have a shred of hope. Wish me luck! Will update later if it is found that it is bad, which I expect.

Ok, so I just compared this TOT to the one that iBowToAndroid sent me, the 2nd time. They are practically identical, regardless of them having different MD5s. Although if anyone feels like actually testing it before they go to better phone, feel free. ha

If it will be possible (and when you will find a way), please, make possible for H960a too.

Well, i am happy to see someone is making progress on the root development on MM, at least, make the community alive.
However, MM needs systemless root and the old way by injecting su binary to the TOT will not work at all.
I am not going to discourage you, unlocking bootloader should be the only way to root MM.

ivangundampc said:
Well, i am happy to see someone is making progress on the root development on MM, at least, make the community alive.
However, MM needs systemless root and the old way by injecting su binary to the TOT will not work at all.
I am not going to discourage you, unlocking bootloader should be the only way to root MM.
Click to expand...
Click to collapse
Unlocking bootloader is something else I currently working on, if the su binary inject does not. Right now I am planning to pull the entire systems contents by soldering off the storage chip and reading it using some hardware of mine. Once I copy all of the partitions over, then the fun begins

ZVNexus said:
Unlocking bootloader is something else I currently working on, if the su binary inject does not. Right now I am planning to pull the entire systems contents by soldering off the storage chip and reading it using some hardware of mine. Once I copy all of the partitions over, then the fun begins
Click to expand...
Click to collapse
The KDZ files used by LGUP include an image of most of the flash used by the system. A few portions are missing, but not very many, notably the "misc" portion is absent. I believe the missing portions are ones that would be unaffected by rooting, so you could get most of the data out of a KDZ file and then root to get the rest of the data.
Aside from the key for the bootloader potentially being in the "misc" area, I also noticed there is noticeable amount of space reserved by the GPT, but unused. There is also a noticeable amount of unallocated space between the GPT and first slice (the "modem" area; this could be for alignment purposes, but it could have other uses as well).
Hopefully LG will be persuaded to unlock the bootloader of all V10 models, but I'm a bit on the pessimistic side at this point. I also hope the unlock mechanism will be shared by all V10s, so we don't need to reproduce it for each device. I haven't done cracking before, but I hope to target the H962 and be able to install full mods in the future...

How goes the progress ZVNexus? Thanks so much for embarking on such a journey for the sake of us all. I loved the flexibility of my Nexus 6, but it was so much weaker than the V10 in so many areas...especially the camera functionality and the ridiculous amount of sluggishness during normal tasks. I went through around 10 of these phones due to QC issues. I'm happy with my V10 (at&t gave me a replacement since I warranty returned the nexus so many times). But, it's just not the same without root and unlocked bootloader. Thank you again!

I found this today..I am sure you have seen it but I figured I would put it here anyway. I downloaded it but figured someone smarter should look before I tried to flash it. I cannot post it. Someone posted it on the original mm tot download thread..it was posted by radical.

In Theory...
In theory...
Are stock MM KDZ files available for the AT&T V10? I haven't seen them in the KDZ thread, but they may be posted in the AT&T area. If so, it should be possible to use my KDZ tools to unpack the KDZ, then install Superuser in the image and then repack the KDZ and tell LGUP to install the modified KDZ.
At the moment I'm cautiously optimistic about the KDZ tools. I've got all of the fields inside the files identified, but there some hazardously big ones in the DZ header that are unknown. My tools simply copy those, but I worry. Also SEEK_DATA/SEEK_HOLE are available on Linux, but likely not on Windows. (hack: replacing SEEK_HOLE with io.SEEK_END at the top of image2chunks.py should work around errors)

any update on this project?

I follow the V20 threads and all the V20s have root now. From what I read they used a debug boot.img from a Developer V20 and extracted the boot.img and used an exploit from the DirtyCow Root method to flash it. You have to really be involved to root it.
Just seeing where this can take the V10.

Any Update?
Sir is there any update on the root for at&t LG v10? Waiting anxiously!!

SH4DOW ASSASSIN said:
Sir is there any update on the root for at&t LG v10? Waiting anxiously!!
Click to expand...
Click to collapse
Nope. The hope of root for this phone was crushed long ago. Almost time for everyone to get new ones.

I am going to upgrade my phone from lg v10 to v20. Can you confirm me that is every lg v20 mobile carrier version ROOTABLE or i should buy a specific version?

SH4DOW ASSASSIN said:
I am going to upgrade my phone from lg v10 to v20. Can you confirm me that is every lg v20 mobile carrier version ROOTABLE or i should buy a specific version?
Click to expand...
Click to collapse
Don't do it. I'm done with LG. But a pixel or something, they are much better.

OTA ATT Updates on ST? Needed for Root?

Hey guys, I just got myself an unlocked ATT G4 H81010b. My girl and I got matching phones, and after she bought the bring your own phone ST SIM pack and transferred her number she received an OTA update. Her phone is now H81010o. I'm not sure if hers was a 10b before the update i didnt think to check. I did not want to set up my phone until I was able to figure out how to root it, however - now that I have found I need an OTA in order to root it (i havent seen any confirmed 10b roots, i cant find any 10b specific commands - i was going to use the "root injection method"). The only difference here is, I am simply moving my SIM from my G2 to my G4, so I'm wondering if this would make any difference as to whether i recieve an OTA or not? Furthermore, I am confused because all the research I have done indicates that ST doesnt do OTAs. But i do know that her phone restarted, downloaded a software update and installed it. Is it possible for me to manually install the update? I really would just like to root, install TWRP, and CM13 (or maybe I'll try a different ROM this time). I know this is a loaded question, but any help is appreciated.

I finally found a confirmed working H81010b rooted image, no need to update now.
http://forum.xda-developers.com/att-g4/development/stock-rooted-img-files-h81010b-t3231408