Database Info

[GUIDE] Install Stock Firmware 5.1 on LG V10 F600L F600S with LGUP

Hi every one, in this guide i will share with you stock rom for lg v10 F600L and F600S. so lets do it
Notice ! : Befor we start do this at your own risk Do not take responsibility if you brick your devices :angel:
------------------------------------------- ------- ---------------------------------------------------------------
THIS THREAD IS JUST FOR COREAN VERSION LG V10 F600L & F600S ( F600K comming soon :fingers-crossed: )
Lets start : this guide will be through [ LGUP ] method :laugh:
1 - Download LGUP tool : https://www.fshare.vn/file/3GQ3Y94HUIRZ
2 - Download TOT firmware for LG V10 F600L https://www.fshare.vn/file/LEVWQMM1YG3S
3 - Download TOT firmware for LG V10 F600S : https://www.fshare.vn/file/9RQ579IHMG4V
4 - Unzip floader then install LGUP_8994_DLL first and then LGUP
5 - Start LGUP programme on your computer "make sure your phone is plugged in"
6 - If you have a problem that LGUP does not see your LG V10, leave your mobile connected via USB and leave LGUP running,
restart your mobile, hopefully this will solve the problem.
( if the programme does not start or somthing went wrong,just copy-past it on C:\Program Files (x86)\LG Electronics\LGUP\model and run it again ( inside the floder ),hopefully this will solve the problem.)
7 Click on FILE PATH and select your TOT firmware,Close LGUP and re-open it. Make sure you select REFURBISH this will do a full wipe, tick BIN file. Press Start. its make a lot of time please be patient
Et voilaa you're already running on LG V10 F600 L/S stock 5.1 lollipop
LGUP Video Guide - Thanks to @KiaTheKing https://www.youtube.com/watch?v=iPKcuYwDoxY
===> PLEASE HIT THANKS BUTTON :good:

What do we win or lose with this?
Will we be able to get an OTA after this?

partymola said:
What do we win or lose with this?
Will we be able to get an OTA after this?
Click to expand...
Click to collapse
return to stock 5.1 so i think you will be able to get OTA

deleco said:
Hi every one, in this guide i will share with you stock rom for lg v10 F600L and F600S. so lets do it
Notice ! : Befor we start do this at your own risk Do not take responsibility if you brick your devices :angel:
------------------------------------------- ------- ---------------------------------------------------------------
THIS THREAD IS JUST FOR COREAN VERSION LG V10 F600L & F600S ( F600K comming soon :fingers-crossed: )
Lets start : this guide will be through [ LGUP ] method :laugh:
1 - Download LGUP tool : https://www.fshare.vn/file/3GQ3Y94HUIRZ
2 - Download TOT firmware for LG V10 F600L https://www.fshare.vn/file/LEVWQMM1YG3S
3 - Download TOT firmware for LG V10 F600S : https://www.fshare.vn/file/9RQ579IHMG4V
4 - Unzip floader then install LGUP_8994_DLL first and then LGUP
5 - Start LGUP programme on your computer "make sure your phone is plugged in"
6 - If you have a problem that LGUP does not see your LG V10, leave your mobile connected via USB and leave LGUP running,
restart your mobile, hopefully this will solve the problem.
( if the programme does not start or somthing went wrong,just copy-past it on C:\Program Files (x86)\LG Electronics\LGUP\model and run it again ( inside the floder ),hopefully this will solve the problem.)
7 Click on FILE PATH and select your TOT firmware,Close LGUP and re-open it. Make sure you select REFURBISH this will do a full wipe, tick BIN file. Press Start. its make a lot of time please be patient
Et voilaa you're already running on LG V10 F600 L/S stock 5.1 lollipop
LGUP Video Guide - Thanks to @KiaTheKing https://www.youtube.com/watch?v=iPKcuYwDoxY
===> PLEASE HIT THANKS BUTTON :good:
Click to expand...
Click to collapse
Hello,
If i'm not mistaken, these files are used for the rooting method shared by LGviet.com forum.
These files are "F600l10irootedsystem.rar" and "LGF600SATV10msystemROOTED.rar"
So, what do you mean when you say this is the stock rom ?

ngocthach904 said:
Hello,
If i'm not mistaken, these files are used for the rooting method shared by LGviet.com forum.
These files are "F600l10irootedsystem.rar" and "LGF600SATV10msystemROOTED.rar"
So, what do you mean when you say this is the stock rom ?
Click to expand...
Click to collapse
stock rom roted

This is a rooted version for Korean F600L?

No is not root

sb erb said:
This is a rooted version for Korean F600L?
Click to expand...
Click to collapse
yes its rooted

Hello,
Sorry but I have followed the whole process and I can assure you that my V10 is not Root.
Tell me the complete procedure that you follow !!!
I started my V10 excatement as before

Images

I agree I followed and got no root also

no root

deleco said:
Hi every one, in this guide i will share with you stock rom for lg v10 F600L and F600S. so lets do it
Notice ! : Befor we start do this at your own risk Do not take responsibility if you brick your devices :angel:
------------------------------------------- ------- ---------------------------------------------------------------
THIS THREAD IS JUST FOR COREAN VERSION LG V10 F600L & F600S ( F600K comming soon :fingers-crossed: )
Lets start : this guide will be through [ LGUP ] method :laugh:
1 - Download LGUP tool : https://www.fshare.vn/file/3GQ3Y94HUIRZ
2 - Download TOT firmware for LG V10 F600L https://www.fshare.vn/file/LEVWQMM1YG3S
3 - Download TOT firmware for LG V10 F600S : https://www.fshare.vn/file/9RQ579IHMG4V
4 - Unzip floader then install LGUP_8994_DLL first and then LGUP
5 - Start LGUP programme on your computer "make sure your phone is plugged in"
6 - If you have a problem that LGUP does not see your LG V10, leave your mobile connected via USB and leave LGUP running,
restart your mobile, hopefully this will solve the problem.
( if the programme does not start or somthing went wrong,just copy-past it on C:\Program Files (x86)\LG Electronics\LGUP\model and run it again ( inside the floder ),hopefully this will solve the problem.)
7 Click on FILE PATH and select your TOT firmware,Close LGUP and re-open it. Make sure you select REFURBISH this will do a full wipe, tick BIN file. Press Start. its make a lot of time please be patient
Et voilaa you're already running on LG V10 F600 L/S stock 5.1 lollipop
LGUP Video Guide - Thanks to @KiaTheKing https://www.youtube.com/watch?v=iPKcuYwDoxY
===> PLEASE HIT THANKS BUTTON :good:
Click to expand...
Click to collapse
IS it already rooted stock rom?

hoi_lai said:
IS it already rooted stock rom?
Click to expand...
Click to collapse
it should be rooted,but there are some people here unable to gaint root acces :/ any way i will take a lock later

Hey guys, I'm trying to find a phablet with no smaller than 5.7 display, if I can't root it I don't want it. I'm on Verizon and am do for an upgrade. What would everyone recommend buying for rooting? Bootloader isn't a must have but it would be nice. Just need help picking out a good device. Thanks!!!
Sent from my Nexus 6 using Tapatalk

Only t-mobile version has unlocked bootloader and root.
There are the 2 dual sim versions that have recently achieved root without bootloader unlock.
Those are the only v10s so far to have any root access.
Sent from my pretty nifty brand new LG V10

deleco said:
Hi every one, in this guide i will share with you stock rom for lg v10 F600L and F600S. so lets do it
Notice ! : Befor we start do this at your own risk Do not take responsibility if you brick your devices :angel:
------------------------------------------- ------- ---------------------------------------------------------------
THIS THREAD IS JUST FOR COREAN VERSION LG V10 F600L & F600S ( F600K comming soon :fingers-crossed: )
Lets start : this guide will be through [ LGUP ] method :laugh:
1 - Download LGUP tool : https://www.fshare.vn/file/3GQ3Y94HUIRZ
2 - Download TOT firmware for LG V10 F600L https://www.fshare.vn/file/LEVWQMM1YG3S
3 - Download TOT firmware for LG V10 F600S : https://www.fshare.vn/file/9RQ579IHMG4V
4 - Unzip floader then install LGUP_8994_DLL first and then LGUP
5 - Start LGUP programme on your computer "make sure your phone is plugged in"
6 - If you have a problem that LGUP does not see your LG V10, leave your mobile connected via USB and leave LGUP running,
restart your mobile, hopefully this will solve the problem.
( if the programme does not start or somthing went wrong,just copy-past it on C:\Program Files (x86)\LG Electronics\LGUP\model and run it again ( inside the floder ),hopefully this will solve the problem.)
7 Click on FILE PATH and select your TOT firmware,Close LGUP and re-open it. Make sure you select REFURBISH this will do a full wipe, tick BIN file. Press Start. its make a lot of time please be patient
Et voilaa you're already running on LG V10 F600 L/S stock 5.1 lollipop
LGUP Video Guide - Thanks to @KiaTheKing https://www.youtube.com/watch?v=iPKcuYwDoxY
===> PLEASE HIT THANKS BUTTON :good:
Click to expand...
Click to collapse
I have opened my back to stock guide now with KDZ files http://forum.xda-developers.com/lg-v10/general/guide-lg-v10-stock-firmware-to-stock-t3224170

mwebb34 said:
Hey guys, I'm trying to find a phablet with no smaller than 5.7 display, if I can't root it I don't want it. I'm on Verizon and am do for an upgrade. What would everyone recommend buying for rooting? Bootloader isn't a must have but it would be nice. Just need help picking out a good device. Thanks!!!
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
rooting will be avlaible soon for differente version of divices,like lg v10 all version ,think to buy a nexus 6p it have already root acces

@deleco I uploaded some mirrors in my back to stock thread if you'd like to use them. It look about 3 hours to download from your OP links.

I bought the v10 Verizon varrient. Hopfully this thing will see root
Sent from my VS990 using Tapatalk

Stock LG H631 firmware H63120k kdz available for download

T-mobile LG H631TN firmware v20k:
Model: LG H631TN
Version: H63120o
H63120o
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FWDDLW2B72E5AOY4FD833JC/H63120o_00_0502.kdz
MetroPCS LG G Stylo MS631 firmware v20p
Software version: MS63120p
Download: http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FWDD9NDB72VMAWE69D83RCZ/MS63120p_00_0502.kdz
You need to use XDM download manager or other download tools to download the firmware from above link. Using a browser to download the file from LG cause a blank page issue.
Code:
wget --user-agent="LGE-ActiveDP/0.9" [Firmware_url] -O [kdzfile_name]
wget --user-agent="LGE-ActiveDP/0.9" http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW04E36D7217AYEB927DG9K/V300S20e_00_1218.kdz -O V300S20e_00_1218.kdz
LG G Stylo H631: How to unrick / restore back to stock - using LG UP
via: https://www.mylgphones.com/t-mobile-lg-g-stylo-h631-stock-kdz-firmware-h63120k.html

Can I flash this on metro pcs?

noobiedev83 said:
Can I flash this on metro pcs?
Click to expand...
Click to collapse
Yes you can. The LGH631 and the LGMS631 are both the same devices essentially, same exact hardware on the same exact network. I personally used the 5.1.1 T-Mobile bootstack and the returntostock zips which I flashed via TWRP after rooting. Stay stock unrooted 5.1.1 and then jump on your wireless network and wait for the update. I was able to keep my Metro apps this way.

asialove2013 said:
Now the Stock kdz firmware for T-mobile H631 is available for download from LG server.
H63120b kdz
H63120b_00_0216.kdz
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FWFBU74552ZQAOS84E13LS4/H63120b_00_0216.kdz
via: http://www.mylgphones.com/t-mobile-...roid-6-0-update-software-version-h63120b.html
Click to expand...
Click to collapse
noobiedev83 said:
Can I flash this on metro pcs?
Click to expand...
Click to collapse
Mattix724 said:
Yes you can. The LGH631 and the LGMS631 are both the same devices essentially, same exact hardware on the same exact network. I personally used the 5.1.1 T-Mobile bootstack and the returntostock zips which I flashed via TWRP after rooting. Stay stock unrooted 5.1.1 and then jump on your wireless network and wait for the update. I was able to keep my Metro apps this way.
Click to expand...
Click to collapse
Nice.... I'll be downloading the KDZ and created a Flashable zip out of it just squeeze the hassle of flashing KDZ and this way anyone (Tmo-Metro) can update via TWRP.
Posting flashable file later tonight or tomorrow

2 Thumbs up Sir!!!
DrakenFX said:
Nice.... I'll be downloading the KDZ and created a Flashable zip out of it just squeeze the hassle of flashing KDZ and this way anyone (Tmo-Metro) can update via TWRP.
Posting flashable file later tonight or tomorrow
Click to expand...
Click to collapse
Thanks for your contributions to the Xda Community and also helping us Stylo Owners even though you jumped ship to the G4 but i dont blame you for advancing to better technology im the same way, I was a Boost Stylo owner but switched to the Metro variant because it has better specs. Anyways Thanks again Draken

here is as promise Flashable Zips,
Stock Restore and Update to 20b - Marshmallow - via Custom Recovery (TWRP)

Current tool to flash kdz
Hey guys. Just wanting to verify. Is this still the current tool you guys are using to flash kdz's?
http://forum.xda-developers.com/showthread.php?t=2797190
And does anyone have a link to the current drivers I should use when flashing with this tool? Thanks guys

wrenchman76 said:
Hey guys. Just wanting to verify. Is this still the current tool you guys are using to flash kdz's?
http://forum.xda-developers.com/showthread.php?t=2797190
And does anyone have a link to the current drivers I should use when flashing with this tool? Thanks guys
Click to expand...
Click to collapse
I don't believe LG Flash tool works anymore, at least not for our phones. I was lucky enough to get Marshmallow through the OTA after reverting back to stock, but when I first got the phone back in October last year the first thing I did was try to root it and bricked it. If you download LG Bridge there's an option for "Update error recovery" on the bottom right of the software update tab and you can sideload a kdz file there.
Here is where you can get USB drivers for the Stylo.

Thank you. Just trying to get this figured out in case Draken is unable to get his zip fixed. I'm currently rooted on 5.1.1 and trying to go to marshmallow

Not a problem. Happy sideloading, but keep in mind that a kdz is a full return to stock and you'll lose everything on internal storage and you'll be setting it up like a brand new phone. Then again if you're going to root it using the guide on here you'll lose all internal storage data anyway so...
Regardless, good luck!

wrenchman76 said:
Thank you. Just trying to get this figured out in case Draken is unable to get his zip fixed. I'm currently rooted on 5.1.1 and trying to go to marshmallow
Click to expand...
Click to collapse
There is a method to flash the T-Mobile kdz file 10j and then OTA update to 10L and then to MM.
I was rooted on Lollipop/Katana ROM and did this method and am on MM/T-Mobile variant, then rooted after MM update.
LG Flash tool was used to flash the Tmo kdz 10J file (lollipop).
http://androidforums.com/threads/metro-pcs-lg-g-stylo-users-update-to-marshmallow.1011917
I have the metro stylo

I haven't been able to flash the MM kdz with flash tool only able to recover using earlier kdzs. Has anyone been able to use the 6.0 kdz in flash tool?
Sent from my LGMS631 using XDA-Developers mobile app

Use Official LG UP
wrenchman76 said:
Hey guys. Just wanting to verify. Is this still the current tool you guys are using to flash kdz's?
http://forum.xda-developers.com/showthread.php?t=2797190
And does anyone have a link to the current drivers I should use when flashing with this tool? Thanks guys
Click to expand...
Click to collapse
Hi, You can use latest LG UP software to flash kdz/tot/bin firmware
LG UP Ver. 1.14: LGUP_Install_Ver_1_14_3.msi
LG UP LAB Ver. 1.10: LGUP_Lab_Frame_Ver_1_10.msi
LG UP Store Ver. 1.14: LGUP_Store_Frame_Ver_1_14_3.msi
http://www.mylgphones.com/download-lg-up-software

Hey guys so ive successfully managed to get MM. I miss TWRP... anyone know how to get it on 6.0??

asialove2013 said:
Hi, You can use latest LG UP software to flash kdz/tot/bin firmware
LG UP Ver. 1.14: LGUP_Install_Ver_1_14_3.msi
LG UP LAB Ver. 1.10: LGUP_Lab_Frame_Ver_1_10.msi
LG UP Store Ver. 1.14: LGUP_Store_Frame_Ver_1_14_3.msi
http://www.mylgphones.com/download-lg-up-software
Click to expand...
Click to collapse
Does this actually work for the Stylo ?????
I get device unknown
it also shows on the site that H631 stylo needs LGUP_CY.dll
but is nowhere to be found

it is tricky
removed

Something must be wrong in reg entry above
I get this error after I add values to registry
edit:
can this be the error C:\Program Files (x86)\LG Electronics\LGUP\model
edit: 2
Program Files (x86) fixed the error program is running
Thanks

lionedas said:
Something must be wrong in reg entry above
I get this error after I add values to registry
edit:
can this be the error C:\Program Files (x86)\LG Electronics\LGUP\model
edit: 2
Program Files (x86) fixed the error program is running
Thanks
Click to expand...
Click to collapse
Your Program Files folder is "C:\Program Files (x86)".

@DrakenFX are you still around? you dont have this phone anymore right? does that mean you wont be able to make a flashable zip of the metro mm kdz that is finally out? heres the link just in case http://www.mylgphones.com/metropcs-...receiving-android-6-0-marshmallow-update.html
just another question to anybody that might know regarding that lg up tool...i just used the lg flash tool to flash back to stock so that i would hopefully get the metro mm ota...well it worked perfectly and i was able to get back to stock just fine, but now i still havent received the ota...so im wondering, if the flash tool worked for me, can i use it to install the metro mm kdz instead of using lg up?

LG Flash tool
AP2FTW said:
@DrakenFX are you still around? you dont have this phone anymore right? does that mean you wont be able to make a flashable zip of the metro mm kdz that is finally out? heres the link just in case http://www.mylgphones.com/metropcs-...receiving-android-6-0-marshmallow-update.html
just another question to anybody that might know regarding that lg up tool...i just used the lg flash tool to flash back to stock so that i would hopefully get the metro mm ota...well it worked perfectly and i was able to get back to stock just fine, but now i still havent received the ota...so im wondering, if the flash tool worked for me, can i use it to install the metro mm kdz instead of using lg up?
Click to expand...
Click to collapse
Hey,
LG UP is a new and easy tool from LG Official. It can flash kdz/tot/dz files.
You can use "LG flash tool 2.0.1.5 or above" to flash kdz/tot/dz files.
The LG flash tool 2014 is a tool modified by some one from Vietnam, I did not test it.

Restore v20 to 100% Stock (!!even for bricked devices!!)

This is a simple method to restore your v20 to stock, I have tried with my bricked H990DS with wrong bootloader flashed.
1. Download .kdz file for your v20 model from the following links. Currently v20 models available are:
F800K, F800L, F800S, H915, H918TN, H990, VS995, H990N and H990DS
H990DS https://lg-firmwares.com/lg-h990ds-firmwares/firmwares/
H990N https://lg-firmwares.com/lg-h990n-firmwares/firmwares/
https://lg-firmwares.com/
2. Search, download and install LGUP ( LGUP_Store_Frame_Ver_1_14_3.msi ) and a file called LGUP_common.dll
2a. Copy the LGUP_common.dll to C:\Program Files (x86)\LG Electronics\LGUP\model\common (May need to modify folder access right)
3. Search, download and install LG Driver ( LGMobileDriver_WHQL_Ver_4.1.1.exe )
4. Completely Power off the v20 ( or to remove and put the battery back )
5. Plug the USB end of sync cable to your PC
6. Press and hold "Volume Up"
7. Plug in the USB-C end of sync cable to the v20. The phone will enter download mode (or Firmware Update). Now you can release the "Volume Up".
8. Run LGUP. The program will regconise the v20.
9. At the file path, click "..." and chose the .kdz file
10.Choose "UPGRADE"
11.Click "Start" and wait until the process is complete.
Now we have a safe method of restoring bricked v20. Hope developers can start trying to root without worrying of bricking the phone.
This method is verified on my H990DS. If anybody successfully flash using this method please let us know. Thanks!

Great thread! Just want to add a quick PSA for this:
This may update your phone to the latest firmware which may patchs the current recowvery exploit. While this will unbrick your phone, you should make sure that you have the a firmware below 10i (w/o patch) to flash. If you still have access to TWRP and don't have a 10d firmware for your device, use this instead.

funkeywoookey said:
Great thread! Just want to add a quick PSA for this:
This will update your phone to the latest firmware, 10i (your phone came with 10d). The latest firmware patches the current recowvery exploit we use to root our V20s. While this will unbrick your phone, it should be used a last resort for those still using the 10d firmware and have access to TWRP (use this instead).
Click to expand...
Click to collapse
Thanks for the reminder. Actually it depends on what .kdz is available. For H990DS there is actually v10b firmware for download. So after I flash using this method the dirtycow exploit is still there. Take a look at the filename of the .kdz (e.g. 990ds10b_00_OPEN_TW_DS_OP_1125.kdz is v10b released at Nov 25) Seems that versions below v10i are still ok for dirtycow.

ahlok_hk said:
Thanks for the reminder. Actually it depends on what .kdz is available. For H990DS there is actually v10b firmware for download. So after I flash using this method the dirtycow exploit is still there. Take a look at the filename of the .kdz (e.g. 990ds10b_00_OPEN_TW_DS_OP_1125.kdz is v10b released at Nov 25) Seems that versions below v10i are still ok for dirtycow.
Click to expand...
Click to collapse
Ahh! Nice! Hadn't considered that. I'll update my OP

Darn. Got my hopes up. No VS995 in the list. No T-Mobile and no Sprint either. I don't need it....yet...but I would love to have a restore method for my VS995. Though I've had an LG G3 rooted and flashing custom roms, kernels, and mods for 30 months and never once restored it to stock so perhaps the V20 will be the same

ahlok_hk said:
This is a simple method to restore your v20 to stock, I have tried with my bricked H990DS with wrong bootloader flashed.
1. Download .kdz file for your v20 model from the following links. Currently v20 models available are:
F800K, F800L, F800S, H915, H918TN, H990, H990N and H990DS
http://lg-firmwares.com/category/lg-series/lg-v20-dual/
http://lg-firmwares.com/category/lg-series/lg-v20/
2. Search, download and install LGUP ( LGUP_Store_Frame_Ver_1_14_3.msi )
3. Search, download and install LG Driver ( LGMobileDriver_WHQL_Ver_4.1.1.exe )
4. Completely Power off the v20 ( or to remove and put the battery back )
5. Plug the USB end of sync cable to your PC
6. Press and hold "Volume Up"
7. Plug in the USB-C end of sync cable to the v20. The phone will enter download mode (or Firmware Update). Now you can release the "Volume Up".
8. Run LGUP. The program will regconise the v20.
9. At the file path, click "..." and chose the .kdz file
10.Choose "UPGRADE"
11.Click "Start" and wait until the process is complete.
Now we have a safe method of restoring bricked v20. Hope developers can start trying to root without worrying of bricking the phone.
This method is verified on my H990DS. If anybody successfully flash using this method please let us know. Thanks!
Click to expand...
Click to collapse
are you using uppercut for the model .dll in LGUP?
i have tried this method a few times over the last week, no luck. but i was pretty rough with my phone to be honest, no backup and tried all the other v20 variant roms.
right now LGUP detects my phone as a US99610D so will not flash the H990DS firmware, tried to edit the kdz in hex editor for name value but it detects the kdz as corrupt now. any experience with this?

881jz said:
are you using uppercut for the model .dll in LGUP?
i have tried this method a few times over the last week, no luck. but i was pretty rough with my phone to be honest, no backup and tried all the other v20 variant roms.
right now LGUP detects my phone as a US99610D so will not flash the H990DS firmware, tried to edit the kdz in hex editor for name value but it detects the kdz as corrupt now. any experience with this?
Click to expand...
Click to collapse
I did not use uppercut because anti-virus reported it detect trojan when I use the program.

ahlok_hk said:
I did not use uppercut because anti-virus reported it detect trojan when I use the program.
Click to expand...
Click to collapse
so you found a v20 dll file? do you mind posting a link? or how did you get past LGUP picking up v20 as unknown device? or was this not an issue for you?

881jz said:
so you found a v20 dll file? do you mind posting a link? or how did you get past LGUP picking up v20 as unknown device? or was this not an issue for you?
Click to expand...
Click to collapse
The LGUP first did not detect the device and asked for driver. So I installed the driver as mentioned in OP. After that i was able to flash the phone with the kdz file.

Pleaseeeee helllllpppppp !!!!!!!
IS THERE AN KDZ FILE FOR SPRINT V20 VERSION LS997 PLEASEEEE HELPPPPP I WILL SHARE AND SUB AND WHAT YOU WANT PLEASSSSEEEEE HELPPP !!!!!!!:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:

Spider Monkey said:
IS THERE AN KDZ FILE FOR SPRINT V20 VERSION LS997 PLEASEEEE HELPPPPP I WILL SHARE AND SUB AND WHAT YOU WANT PLEASSSSEEEEE HELPPP !!!!!!!:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
If you know your phone's IMEI number try here:
http://www.rootjunky.com/tag/kdz/

Since some user report this method may not work. Would moderator pls close this thread. Thanks.

There is no any link in the page
I HAVE DO SUCH AS THE EXAMPLE BUT THERE IS NOT ANY LINK IN THE PAGE PLEASEEEE HELPE IS THERE ANY METHOD ELSE
???????:crying::crying::crying:

ahlok_hk said:
Since some user report this method may not work. Would moderator pls close this thread. Thanks.
Click to expand...
Click to collapse
What do you mean?
If this method worked for you & a few other users, it should probably become a sticky rather than closing the thread...
Unbricking a device & restoring to 100% stock is an important feature to most, so if a few users are having issues we should probably help sort out those issues rather than abandoning the thread...
---------- Post added at 03:51 AM ---------- Previous post was at 03:46 AM ----------
Spider Monkey said:
I HAVE DO SUCH AS THE EXAMPLE BUT THERE IS NOT ANY LINK IN THE PAGE PLEASEEEE HELPE IS THERE ANY METHOD ELSE
???????:crying::crying::crying:
Click to expand...
Click to collapse
Just use google
http://www.google.com/search?q=LGUP_Store_Frame_Ver_1_14_3.msi&ie=utf-8&oe=utf-8&client=firefox-b&gfe_rd=cr&ei=ToNeWP79C8Xr8Afvwb6gAQ&gws_rd=cr
&
http://www.google.com/search?q=LGMobileDriver_WHQL_Ver_4.1.1.exe&ie=utf-8&oe=utf-8&client=firefox-b&gfe_rd=cr&ei=1yVfWJGROa_r8AfD9Y_wAg

Anybody confirm working on verizon

Verizon is not listed, so....no
Sent from my VS995 using Tapatalk

Hi I have a lg v20 h918tn and it was rooted with the TWRP ... but my friend messed it up with the recovery mode when he tried to factory reset and he didn't know what he was doing... I can't reboot into system now.. everytime I intall the stock rom when it finishes it always go back to twrp ... I kinda don't get all your info I'm an amateur in all this please help.

Spider Monkey said:
IS THERE AN KDZ FILE FOR SPRINT V20 VERSION LS997 PLEASEEEE HELPPPPP I WILL SHARE AND SUB AND WHAT YOU WANT PLEASSSSEEEEE HELPPP !!!!!!!:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Spider Monkey you are not alone.

ahlok_hk said:
Since some user report this method may not work. Would moderator pls close this thread. Thanks.
Click to expand...
Click to collapse
don't close it off, if it worked for you it should work for others that haven't broken the phone quite as much as me (boot, recovery, aboot and system changed).
the dll looks to be a requirement, perhaps uppercut worked for you prior to you AV killing it. i used it despite the AV alert.
so that part works fine, my phone is detected as version US99610d (files used during root attempt) which prevents me running the KDZ with "Error: KDZ file is invalid. US996 -> H990"
i tried to edit KDZ file to change version from H990 to US996 but this just corrupted the file.
i edited the model in build.prop of a rom and flashed it but it failed to make a difference to LGUP.
in a last ditch effort i restored aboot.img but phone is still detected as 996 instead of 990. but now no more twrp or unlocked bootloader.
any idea what LGUP reads the version info from or how to force it to run a KDZ from a different model?

abel_dlg said:
Hi I have a lg v20 h918tn and it was rooted with the TWRP ... but my friend messed it up with the recovery mode when he tried to factory reset and he didn't know what he was doing... I can't reboot into system now.. everytime I intall the stock rom when it finishes it always go back to twrp ... I kinda don't get all your info I'm an amateur in all this please help.
Click to expand...
Click to collapse
Perhaps this will help: http://forum.xda-developers.com/v20/how-to/restore-h918-to-100-stock-requires-twrp-t3504798

LG v10 H901 (with Korean board F600s) Update to 6.0/7.0 without Brick

Salam Everyone!
Today i'm going to post About Lg V10 model which says it is of T-mobile (from boot animation) but when you remove battery it show Model H901 (Made in korea) So it is huge confusion between users of this phone. Let me clear this one first, your phone consist of board same as LG v10 Model F600s so if your lg Bridge shows an update of something like "F600S30D 05.27.2017" dont worry it is saying this according to board requirement (Warning: Never update your phone using LG Bridge otherwise you are going to brick your phone). LGup is best for updating LG firmware’s.
Now let’s come to the point on how to update this model to Marshmallow and Nougat. And one thing Do this step by step as described in steps below (one thing i'm not a developer i just do little internet research and with help of some friends i was able to do it without bricking my device).
This you need is for update is Kdz for Marshmallow and Nougat and LG up Software.
Installing and fixing LGup ‘unkown model’ problem:
I've seen some people complaining about lgup not picking up this model so here is a fix you can do it to make it work:
Download LG up software using all the links given below:
Now do it as I say.
- Install LG UP LAB Ver. 1.10
- Install LG UP Store Ver. 1.14
- Install LG UP Ver. 1.14
- Now most important is this file LGUP_8994_DLL_Ver_0_0_3_23
(Now here is a Check whether your LGup is installed properly or not scroll through follow the following address and check is there “Common” folder have File “LGUP_Common.dll” If not please try this process again.
Address: C:\Program Files (x86)\LG Electronics\LGUP\model\Common
And after you are done with installing LGup now time to check if this is working remove back cover of your phone (unplug your phone from USB cable, remove the battery, insert battery while pressing the Volume up button and now plug the USB cable. Your phone will turn on automatically with Download Mode on and yes LGup will recognize your phone immediately without any further delay. Showing Model as “H901”
How to check Phone model using Lg info app:
There is one little check you have to do is… go on play store and download Lg info app install it and check your phone info.
Scroll down and See “Provider Name”: (Now here we will see the exact model number of your phone)
- If it shows SK Telecom This means your phone model is LG F600S aka LG V10.
- If LGT this means your phone model is LG F600L aka LG V10.
- If KTF this means your phone model is LG F600K aka LG V10.
Now after Confirming Model Number Now download the relevant firmware but keep one thing in mind do it step by step don’t try to flash direct Nougat on Lollipop okay this will brick your phone as well.
Updating Marshmallow from Lollipop (6.0 from 5.1.1Stock):
As assumed you have downloaded your concerned firmware (you can do a little search on Google and you will find relevant kdz if you need further just p.m me)
- As I have LG F600S aka LG V10 so I will tell you what steps I used.
- First download F600S20l_00_0503.kdz
Now same take your phone in download mode and let LGup recognize it now Select it under BIN File and (Check the Upgrade option) now press start and It will start upgrading. Leave it for a while and let it complete. Now your phone will turn on without any brick  V10 will download some OTA software updates (as it happened in my case). Check your software Update it will surely say 6.0 
Updating Nougat from Marshmallow (7.0 update):
Download the latest firmware from LG firmware website that says “ 7.x Nougat” in my case it was “F600L30e_00_0517.kdz” (Model F600s)
Do the same as you did while updating to Marshmallow. It will successfully update your phone to latest version. No further complications are there in this step it is so simple.
Some Warnings:
- If you are going to use my technique to update please do it carefully do not skip anything.
- I’m not responsible for any kind of brick phones SD cards. As I said I’m not a developer I’m just like you guys was looking for update my phone and done it will little research and help.
- Do not unplug your phone while LGup is updating your phone.
- I’m not developed any software or any update so it is all online stuff nothing personal: D
- And I’m here to help other please feel free to ask anything form me  I’ll try to help as soon as possible 
You can message me on Whatsap I’ll create a group for help on whatsap as well.
Download Links:
LGUP:
LGUP_Install_Ver_1_14_3.msi--> https://mega.nz/#!uxJzEYpD!aM_qkysRAs0xQU_uU3S2evrdtMcwnSIBOFSM-xZ49YM
LGUP_Lab_Frame_Ver_1_10.msi--> https://mega.nz/#!C1QzzSQD!LzJjQv0Vi5feizmqGkBN_kOgR-qZMphcHOJsxdxZVW0
LGUP_Store_Frame_Ver_1_14_3.msi---> https://mega.nz/#!KwYx0JTL!jg-sljtOmO4RwvOGU879Ip0kL_TxH_Rp7q1LDwHW5GQ
LGUP_8994_DLL_Ver_0_0_3_23.msi ---> https://mega.nz/#!Lxg0kZYY!pQnJZ7HtGT3L6o5i4Q23n4SoFcxLcDMOGig66zOlu6U
For Firmware do search online or p.m me

@hapyfaroq as you mentioned, you have flashed Marshmallow F600S20l_00_0503.kdz !!! and for Nougat you flashed F600L30e_00_0517.kdz !!! which are totally different models. could you please recheck if you typed F600L30e_00_0517.kdz istead of F600S30D_00_0510.kdz

SandyKick said:
@hapyfaroq as you mentioned, you have flashed Marshmallow F600S20l_00_0503.kdz !!! and for Nougat you flashed F600L30e_00_0517.kdz !!! which are totally different models. could you please recheck if you typed F600L30e_00_0517.kdz istead of F600S30D_00_0510.kdz
Click to expand...
Click to collapse
Everything is double checked and then posted so no mistake in the article

Mine is KTF but now running fine on F600L Nougat (and the pcb says it's F600L), not sure what's really happen here. It was H901 Tmo before got bricked.

Thanks @hapyfaroq @runningnak3d for your time & help
Failed several times and gave up with LG UP. So i took my phone to a mobile service center who is good at software flashing. i gave him nougat kdz F600S30D. He converted kdz to dz format and flashed with Octoplus box. my mobile was on 5.1.1 android and directly flashed Nougat. Booted flawlessly and no network problems as well Everything is working just awesome. attached my video of Nougat Overview
F600S Nougat Overview - https://www.youtube.com/watch?v=1imf_Utze44&t=18s

hapyfaroq said:
Salam Everyone!
Today i'm going to post About Lg V10 model which says it is of T-mobile (from boot animation) but when you remove battery it show Model H901 (Made in korea) So it is huge confusion between users of this phone. Let me clear this one first, your phone consist of board same as LG v10 Model F600s so if your lg Bridge shows an update of something like "F600S30D 05.27.2017" dont worry it is saying this according to board requirement (Warning: Never update your phone using LG Bridge otherwise you are going to brick your phone). LGup is best for updating LG firmware’s.
Now let’s come to the point on how to update this model to Marshmallow and Nougat. And one thing Do this step by step as described in steps below (one thing i'm not a developer i just do little internet research and with help of some friends i was able to do it without bricking my device).
This you need is for update is Kdz for Marshmallow and Nougat and LG up Software.
Installing and fixing LGup ‘unkown model’ problem:
I've seen some people complaining about lgup not picking up this model so here is a fix you can do it to make it work:
Download LG up software using all the links given below:
Now do it as I say.
- Install LG UP LAB Ver. 1.10
- Install LG UP Store Ver. 1.14
- Install LG UP Ver. 1.14
- Now most important is this file LGUP_8994_DLL_Ver_0_0_3_23
(Now here is a Check whether your LGup is installed properly or not scroll through follow the following address and check is there “Common” folder have File “LGUP_Common.dll” If not please try this process again.
Address: C:\Program Files (x86)\LG Electronics\LGUP\model\Common
And after you are done with installing LGup now time to check if this is working remove back cover of your phone (unplug your phone from USB cable, remove the battery, insert battery while pressing the Volume up button and now plug the USB cable. Your phone will turn on automatically with Download Mode on and yes LGup will recognize your phone immediately without any further delay. Showing Model as “H901”
How to check Phone model using Lg info app:
There is one little check you have to do is… go on play store and download Lg info app install it and check your phone info.
Scroll down and See “Provider Name”: (Now here we will see the exact model number of your phone)
- If it shows SK Telecom This means your phone model is LG F600S aka LG V10.
- If LGT this means your phone model is LG F600L aka LG V10.
- If KTF this means your phone model is LG F600K aka LG V10.
Now after Confirming Model Number Now download the relevant firmware but keep one thing in mind do it step by step don’t try to flash direct Nougat on Lollipop okay this will brick your phone as well.
Updating Marshmallow from Lollipop (6.0 from 5.1.1Stock):
As assumed you have downloaded your concerned firmware (you can do a little search on Google and you will find relevant kdz if you need further just p.m me)
- As I have LG F600S aka LG V10 so I will tell you what steps I used.
- First download F600S20l_00_0503.kdz
Now same take your phone in download mode and let LGup recognize it now Select it under BIN File and (Check the Upgrade option) now press start and It will start upgrading. Leave it for a while and let it complete. Now your phone will turn on without any brick  V10 will download some OTA software updates (as it happened in my case). Check your software Update it will surely say 6.0 
Updating Nougat from Marshmallow (7.0 update):
Download the latest firmware from LG firmware website that says “ 7.x Nougat” in my case it was “F600L30e_00_0517.kdz” (Model F600s)
Do the same as you did while updating to Marshmallow. It will successfully update your phone to latest version. No further complications are there in this step it is so simple.
Some Warnings:
- If you are going to use my technique to update please do it carefully do not skip anything.
- I’m not responsible for any kind of brick phones SD cards. As I said I’m not a developer I’m just like you guys was looking for update my phone and done it will little research and help.
- Do not unplug your phone while LGup is updating your phone.
- I’m not developed any software or any update so it is all online stuff nothing personal: D
- And I’m here to help other please feel free to ask anything form me  I’ll try to help as soon as possible 
You can message me on Whatsap I’ll create a group for help on whatsap as well.
Download Links:
LGUP:
LGUP_Install_Ver_1_14_3.msi--> https://mega.nz/#!uxJzEYpD!aM_qkysRAs0xQU_uU3S2evrdtMcwnSIBOFSM-xZ49YM
LGUP_Lab_Frame_Ver_1_10.msi--> https://mega.nz/#!C1QzzSQD!LzJjQv0Vi5feizmqGkBN_kOgR-qZMphcHOJsxdxZVW0
LGUP_Store_Frame_Ver_1_14_3.msi---> https://mega.nz/#!KwYx0JTL!jg-sljtOmO4RwvOGU879Ip0kL_TxH_Rp7q1LDwHW5GQ
LGUP_8994_DLL_Ver_0_0_3_23.msi ---> https://mega.nz/#!Lxg0kZYY!pQnJZ7HtGT3L6o5i4Q23n4SoFcxLcDMOGig66zOlu6U
For Firmware do search online or p.m me
Click to expand...
Click to collapse
Hello, I have also same model and same issues. My android version is 5.1.1 but i am not able to update it. LG UP is still showing unknow model after all i installed everything step by step.
In LG Electronics folder there is LGUP folder, there is model folder and there are 2 folders. 8974, 8994. in these folders has dll file.
Please help me what to do.

Thank you SOOOOO much for this post!! It helped me a lot to upgrade my refurbished V10 to android 7!!
of course, and after noticing a bit late and a brick later, I realized that for my phone, it's the F600S30d_00_0510 version that works fine!!
now I have an amazing phone with last firmware!!
thank you again!! :highfive: :victory: :victory: :good: :good: :good: :good:

efuzone said:
Hello, I have also same model and same issues. My android version is 5.1.1 but i am not able to update it. LG UP is still showing unknow model after all i installed everything step by step.
In LG Electronics folder there is LGUP folder, there is model folder and there are 2 folders. 8974, 8994. in these folders has dll file.
Please help me what to do.
Click to expand...
Click to collapse
All you need is to carefully install all the software and yes there is no need for DLL file after installing these softwares

hapyfaroq said:
All you need is to carefully install all the software and yes there is no need for DLL file after installing these softwares
Click to expand...
Click to collapse
Hey what if I have a T-Mobile H901 with VS990 motherboard in it? By the sound of things, I would need to flash vs990's kdz. However, wouldn't Tmobile's h901 kdz work as well? I don't understand how your modem and boot screen img(tmobile) wouldn't be affected by flashing f600 kdz to tmobile phone.

AlphaCSxx20 said:
Hey what if I have a T-Mobile H901 with VS990 motherboard in it? By the sound of things, I would need to flash vs990's kdz. However, wouldn't Tmobile's h901 kdz work as well? I don't understand how your modem and boot screen img(tmobile) wouldn't be affected by flashing f600 kdz to tmobile phone.
Click to expand...
Click to collapse
bro as i explained in detail that flashing H901 kdz on phone having different board in it cause it a brick so better to flash such kdz which is compatible with the board.... Be careful double check with your board model. (this is the most important part) Keep that in mind that if you are going to flash some other kdz it will not work and will brick your phone.

i have everything ready but lgup never found the phone as a MODEL.keep saying "unknown model".
i ve checked lg bridge it founds 2 updates (im on 5.1.1) , lgbridge founds both 6 and 7 updates.
i've downloaded the kdz file according to the bridge and and phone provider(tmobile)
but i don't know if i can flash it with LG flashtool besides LGUP.
Because i can not pass "unknown model" issue.

daraza said:
i have everything ready but lgup never found the phone as a MODEL.keep saying "unknown model".
i ve checked lg bridge it founds 2 updates (im on 5.1.1) , lgbridge founds both 6 and 7 updates.
i've downloaded the kdz file according to the bridge and and phone provider(tmobile)
but i don't know if i can flash it with LG flashtool besides LGUP.
Because i can not pass "unknown model" issue.
Click to expand...
Click to collapse
Read the Article carefully it says never update your phone using LG Bridge it will brick your phone, and for kdz please search lg firmware on google and download the relevant kdz as per the model of your Phone's board. Don't waste your time downloading wrong kdz and lg up is hard to setup... keep on searching you will sure find a fix soon. Do a deep google search (as i did) you will figure out what is the problem behind Lg UP

Wassalam Farooq
The issue is that my LG info says its : T-Mobile H901BK
It's on 5.1.1
I have the correct KDZ for Tmobile.
Using a win 10 64 bit OS.
Deep uninstalled all LG soft and drivers
then followed your advises step by step
but still "unknown model"
I need to make first LGup to let find the phone.
I m not sure if i have f600s motherboard.
do you have further advise ?

LG V10 T mobile getting too slow
Salam Bother,
I am new to this and I have joined because of my LG V10 as the mobile was working fine and suddenly it became very slow like if I click on any thing It will take about 2 to 3 seconds before opening and also some times mobile stopped responding and screen became black. I wanted to know if it is a software failure or any thing related to hardware? one thing more phone is turning on and there is no issue with network, wifi, camera even I can use any app on it but very slowly.

daraza said:
Wassalam Farooq
The issue is that my LG info says its : T-Mobile H901BK
It's on 5.1.1
I have the correct KDZ for Tmobile.
Using a win 10 64 bit OS.
Deep uninstalled all LG soft and drivers
then followed your advises step by step
but still "unknown model"
I need to make first LGup to let find the phone.
I m not sure if i have f600s motherboard.
do you have further advise ?
Click to expand...
Click to collapse
Bro first of all you need to confirm your phone board model using Lg info app ... you can find it on playstore for free and for lg up do all as i said above then turn off your phone remove the battery... plug in the usb cable... now install the battery while pressing volume up button it (make sure you lg up software is running) then your phone will directly go into download mode and Lg up will sure recognize your phone model but first of all confirm your phone's board model.

hariszaman said:
Salam Bother,
I am new to this and I have joined because of my LG V10 as the mobile was working fine and suddenly it became very slow like if I click on any thing It will take about 2 to 3 seconds before opening and also some times mobile stopped responding and screen became black. I wanted to know if it is a software failure or any thing related to hardware? one thing more phone is turning on and there is no issue with network, wifi, camera even I can use any app on it but very slowly.
Click to expand...
Click to collapse
Wslam.
Yar ap mjy whatsap py contact kro... will try to help you

i have F600s board
@hapyfaroq bhai i have h901 with f600s board. i updated via lg bridge but it is bricked in Qualcomm 9008 mode. maine kdz file download krli f600s ki. extract bhi karli kdz aur dz. QFIL se karne ki koshish kari thi lekin rawprogram0.xml aur patch.xml nahi mil rhi mujhe yar bhai help karo plzzz

whats your whatsapp num?

SandyKick said:
@hapyfaroq as you mentioned, you have flashed Marshmallow F600S20l_00_0503.kdz !!! and for Nougat you flashed F600L30e_00_0517.kdz !!! which are totally different models. could you please recheck if you typed F600L30e_00_0517.kdz istead of F600S30D_00_0510.kdz
Click to expand...
Click to collapse
did you get it done at any official service center or 3rd party service center?

kingvenkat07 said:
did you get it done at any official service center or 3rd party service center?
Click to expand...
Click to collapse
Done with normal software repair shop here in ameerpet Hyderabad charged 300 rupees

Kdz 8.0 vs98820a oreo

KDZ 8.0 VS98820A OREO
8.0: https://pan.baidu.com/s/1-NCBmsPIJTRz6LnM1v7TvA Pass: 67j7

Download Verizon LG G6 VS988 Stock Android Oreo 8.0 firmware vs98820a
From LG official server: http://pkg02.cdn.gdms.lge.com/dn/do...AP0A20IA3Z6B312F3O/VS98820a_01_0423_ARB00.kdz
Google driver mirror:
https://drive.google.com/open?id=1RdKEVwrfimtq0temZ73ZWxMZuhz8u1J- vs98820a_01_0423_arb00.kdz

Is this a complete kdz or just the upgrade kdz.. I'm looking for the kdz that works with refurbish mode . Ever since this update my phone has been trash . I've tried the first kdz but only worked in upgrade mode..

Full
bigfdaddy2 said:
Is this a complete kdz or just the upgrade kdz.. I'm looking for the kdz that works with refurbish mode . Ever since this update my phone has been trash . I've tried the first kdz but only worked in upgrade mode..
Click to expand...
Click to collapse
This file is 2.8 gigs the OTA update was about 700-800 megs. The update messed my phone up too, lag, BT issues, and less bars my radio is crap now. Going to try to run the full file hopefully fixes it if not maybe i can at least roll back to 7.0

How to enter download mode?
Hi, thanks for the sharing.
But i can not find a way to enter download mode of my VS988.
I have followed this instruction: hard*reset.info/devices/lg/lg-g6-vs988/download-mode (remove the asterisk)
But still no luck.
Did i miss something important here?
Please advise..
Thanks anyway
UPDATE:
Somehow doing the "enter download mode procedure" while the data cable is connected, solve the problem...
Thanks anyway

Is there a flashable link I have no pc????

musicman5844 said:
Is there a flashable link I have no pc????
Click to expand...
Click to collapse
Appears this thread is dead I want to know the same answer

Could you tell me which oreo version is the smoothest and fastest? Thanks.