Salam Everyone!
Today i'm going to post About Lg V10 model which says it is of T-mobile (from boot animation) but when you remove battery it show Model H901 (Made in korea) So it is huge confusion between users of this phone. Let me clear this one first, your phone consist of board same as LG v10 Model F600s so if your lg Bridge shows an update of something like "F600S30D 05.27.2017" dont worry it is saying this according to board requirement (Warning: Never update your phone using LG Bridge otherwise you are going to brick your phone). LGup is best for updating LG firmware’s.
Now let’s come to the point on how to update this model to Marshmallow and Nougat. And one thing Do this step by step as described in steps below (one thing i'm not a developer i just do little internet research and with help of some friends i was able to do it without bricking my device).
This you need is for update is Kdz for Marshmallow and Nougat and LG up Software.
Installing and fixing LGup ‘unkown model’ problem:
I've seen some people complaining about lgup not picking up this model so here is a fix you can do it to make it work:
Download LG up software using all the links given below:
Now do it as I say.
- Install LG UP LAB Ver. 1.10
- Install LG UP Store Ver. 1.14
- Install LG UP Ver. 1.14
- Now most important is this file LGUP_8994_DLL_Ver_0_0_3_23
(Now here is a Check whether your LGup is installed properly or not scroll through follow the following address and check is there “Common” folder have File “LGUP_Common.dll” If not please try this process again.
Address: C:\Program Files (x86)\LG Electronics\LGUP\model\Common
And after you are done with installing LGup now time to check if this is working remove back cover of your phone (unplug your phone from USB cable, remove the battery, insert battery while pressing the Volume up button and now plug the USB cable. Your phone will turn on automatically with Download Mode on and yes LGup will recognize your phone immediately without any further delay. Showing Model as “H901”
How to check Phone model using Lg info app:
There is one little check you have to do is… go on play store and download Lg info app install it and check your phone info.
Scroll down and See “Provider Name”: (Now here we will see the exact model number of your phone)
- If it shows SK Telecom This means your phone model is LG F600S aka LG V10.
- If LGT this means your phone model is LG F600L aka LG V10.
- If KTF this means your phone model is LG F600K aka LG V10.
Now after Confirming Model Number Now download the relevant firmware but keep one thing in mind do it step by step don’t try to flash direct Nougat on Lollipop okay this will brick your phone as well.
Updating Marshmallow from Lollipop (6.0 from 5.1.1Stock):
As assumed you have downloaded your concerned firmware (you can do a little search on Google and you will find relevant kdz if you need further just p.m me)
- As I have LG F600S aka LG V10 so I will tell you what steps I used.
- First download F600S20l_00_0503.kdz
Now same take your phone in download mode and let LGup recognize it now Select it under BIN File and (Check the Upgrade option) now press start and It will start upgrading. Leave it for a while and let it complete. Now your phone will turn on without any brick V10 will download some OTA software updates (as it happened in my case). Check your software Update it will surely say 6.0
Updating Nougat from Marshmallow (7.0 update):
Download the latest firmware from LG firmware website that says “ 7.x Nougat” in my case it was “F600L30e_00_0517.kdz” (Model F600s)
Do the same as you did while updating to Marshmallow. It will successfully update your phone to latest version. No further complications are there in this step it is so simple.
Some Warnings:
- If you are going to use my technique to update please do it carefully do not skip anything.
- I’m not responsible for any kind of brick phones SD cards. As I said I’m not a developer I’m just like you guys was looking for update my phone and done it will little research and help.
- Do not unplug your phone while LGup is updating your phone.
- I’m not developed any software or any update so it is all online stuff nothing personal: D
- And I’m here to help other please feel free to ask anything form me I’ll try to help as soon as possible
You can message me on Whatsap I’ll create a group for help on whatsap as well.
Download Links:
LGUP:
LGUP_Install_Ver_1_14_3.msi--> https://mega.nz/#!uxJzEYpD!aM_qkysRAs0xQU_uU3S2evrdtMcwnSIBOFSM-xZ49YM
LGUP_Lab_Frame_Ver_1_10.msi--> https://mega.nz/#!C1QzzSQD!LzJjQv0Vi5feizmqGkBN_kOgR-qZMphcHOJsxdxZVW0
LGUP_Store_Frame_Ver_1_14_3.msi---> https://mega.nz/#!KwYx0JTL!jg-sljtOmO4RwvOGU879Ip0kL_TxH_Rp7q1LDwHW5GQ
LGUP_8994_DLL_Ver_0_0_3_23.msi ---> https://mega.nz/#!Lxg0kZYY!pQnJZ7HtGT3L6o5i4Q23n4SoFcxLcDMOGig66zOlu6U
For Firmware do search online or p.m me
@hapyfaroq as you mentioned, you have flashed Marshmallow F600S20l_00_0503.kdz !!! and for Nougat you flashed F600L30e_00_0517.kdz !!! which are totally different models. could you please recheck if you typed F600L30e_00_0517.kdz istead of F600S30D_00_0510.kdz
SandyKick said:
@hapyfaroq as you mentioned, you have flashed Marshmallow F600S20l_00_0503.kdz !!! and for Nougat you flashed F600L30e_00_0517.kdz !!! which are totally different models. could you please recheck if you typed F600L30e_00_0517.kdz istead of F600S30D_00_0510.kdz
Click to expand...
Click to collapse
Everything is double checked and then posted so no mistake in the article
Mine is KTF but now running fine on F600L Nougat (and the pcb says it's F600L), not sure what's really happen here. It was H901 Tmo before got bricked.
Thanks @hapyfaroq @runningnak3d for your time & help
Failed several times and gave up with LG UP. So i took my phone to a mobile service center who is good at software flashing. i gave him nougat kdz F600S30D. He converted kdz to dz format and flashed with Octoplus box. my mobile was on 5.1.1 android and directly flashed Nougat. Booted flawlessly and no network problems as well Everything is working just awesome. attached my video of Nougat Overview
F600S Nougat Overview - https://www.youtube.com/watch?v=1imf_Utze44&t=18s
hapyfaroq said:
Salam Everyone!
Today i'm going to post About Lg V10 model which says it is of T-mobile (from boot animation) but when you remove battery it show Model H901 (Made in korea) So it is huge confusion between users of this phone. Let me clear this one first, your phone consist of board same as LG v10 Model F600s so if your lg Bridge shows an update of something like "F600S30D 05.27.2017" dont worry it is saying this according to board requirement (Warning: Never update your phone using LG Bridge otherwise you are going to brick your phone). LGup is best for updating LG firmware’s.
Now let’s come to the point on how to update this model to Marshmallow and Nougat. And one thing Do this step by step as described in steps below (one thing i'm not a developer i just do little internet research and with help of some friends i was able to do it without bricking my device).
This you need is for update is Kdz for Marshmallow and Nougat and LG up Software.
Installing and fixing LGup ‘unkown model’ problem:
I've seen some people complaining about lgup not picking up this model so here is a fix you can do it to make it work:
Download LG up software using all the links given below:
Now do it as I say.
- Install LG UP LAB Ver. 1.10
- Install LG UP Store Ver. 1.14
- Install LG UP Ver. 1.14
- Now most important is this file LGUP_8994_DLL_Ver_0_0_3_23
(Now here is a Check whether your LGup is installed properly or not scroll through follow the following address and check is there “Common” folder have File “LGUP_Common.dll” If not please try this process again.
Address: C:\Program Files (x86)\LG Electronics\LGUP\model\Common
And after you are done with installing LGup now time to check if this is working remove back cover of your phone (unplug your phone from USB cable, remove the battery, insert battery while pressing the Volume up button and now plug the USB cable. Your phone will turn on automatically with Download Mode on and yes LGup will recognize your phone immediately without any further delay. Showing Model as “H901”
How to check Phone model using Lg info app:
There is one little check you have to do is… go on play store and download Lg info app install it and check your phone info.
Scroll down and See “Provider Name”: (Now here we will see the exact model number of your phone)
- If it shows SK Telecom This means your phone model is LG F600S aka LG V10.
- If LGT this means your phone model is LG F600L aka LG V10.
- If KTF this means your phone model is LG F600K aka LG V10.
Now after Confirming Model Number Now download the relevant firmware but keep one thing in mind do it step by step don’t try to flash direct Nougat on Lollipop okay this will brick your phone as well.
Updating Marshmallow from Lollipop (6.0 from 5.1.1Stock):
As assumed you have downloaded your concerned firmware (you can do a little search on Google and you will find relevant kdz if you need further just p.m me)
- As I have LG F600S aka LG V10 so I will tell you what steps I used.
- First download F600S20l_00_0503.kdz
Now same take your phone in download mode and let LGup recognize it now Select it under BIN File and (Check the Upgrade option) now press start and It will start upgrading. Leave it for a while and let it complete. Now your phone will turn on without any brick V10 will download some OTA software updates (as it happened in my case). Check your software Update it will surely say 6.0
Updating Nougat from Marshmallow (7.0 update):
Download the latest firmware from LG firmware website that says “ 7.x Nougat” in my case it was “F600L30e_00_0517.kdz” (Model F600s)
Do the same as you did while updating to Marshmallow. It will successfully update your phone to latest version. No further complications are there in this step it is so simple.
Some Warnings:
- If you are going to use my technique to update please do it carefully do not skip anything.
- I’m not responsible for any kind of brick phones SD cards. As I said I’m not a developer I’m just like you guys was looking for update my phone and done it will little research and help.
- Do not unplug your phone while LGup is updating your phone.
- I’m not developed any software or any update so it is all online stuff nothing personal: D
- And I’m here to help other please feel free to ask anything form me I’ll try to help as soon as possible
You can message me on Whatsap I’ll create a group for help on whatsap as well.
Download Links:
LGUP:
LGUP_Install_Ver_1_14_3.msi--> https://mega.nz/#!uxJzEYpD!aM_qkysRAs0xQU_uU3S2evrdtMcwnSIBOFSM-xZ49YM
LGUP_Lab_Frame_Ver_1_10.msi--> https://mega.nz/#!C1QzzSQD!LzJjQv0Vi5feizmqGkBN_kOgR-qZMphcHOJsxdxZVW0
LGUP_Store_Frame_Ver_1_14_3.msi---> https://mega.nz/#!KwYx0JTL!jg-sljtOmO4RwvOGU879Ip0kL_TxH_Rp7q1LDwHW5GQ
LGUP_8994_DLL_Ver_0_0_3_23.msi ---> https://mega.nz/#!Lxg0kZYY!pQnJZ7HtGT3L6o5i4Q23n4SoFcxLcDMOGig66zOlu6U
For Firmware do search online or p.m me
Click to expand...
Click to collapse
Hello, I have also same model and same issues. My android version is 5.1.1 but i am not able to update it. LG UP is still showing unknow model after all i installed everything step by step.
In LG Electronics folder there is LGUP folder, there is model folder and there are 2 folders. 8974, 8994. in these folders has dll file.
Please help me what to do.
Thank you SOOOOO much for this post!! It helped me a lot to upgrade my refurbished V10 to android 7!!
of course, and after noticing a bit late and a brick later, I realized that for my phone, it's the F600S30d_00_0510 version that works fine!!
now I have an amazing phone with last firmware!!
thank you again!! :highfive: :victory: :victory: :good: :good: :good: :good:
efuzone said:
Hello, I have also same model and same issues. My android version is 5.1.1 but i am not able to update it. LG UP is still showing unknow model after all i installed everything step by step.
In LG Electronics folder there is LGUP folder, there is model folder and there are 2 folders. 8974, 8994. in these folders has dll file.
Please help me what to do.
Click to expand...
Click to collapse
All you need is to carefully install all the software and yes there is no need for DLL file after installing these softwares
hapyfaroq said:
All you need is to carefully install all the software and yes there is no need for DLL file after installing these softwares
Click to expand...
Click to collapse
Hey what if I have a T-Mobile H901 with VS990 motherboard in it? By the sound of things, I would need to flash vs990's kdz. However, wouldn't Tmobile's h901 kdz work as well? I don't understand how your modem and boot screen img(tmobile) wouldn't be affected by flashing f600 kdz to tmobile phone.
AlphaCSxx20 said:
Hey what if I have a T-Mobile H901 with VS990 motherboard in it? By the sound of things, I would need to flash vs990's kdz. However, wouldn't Tmobile's h901 kdz work as well? I don't understand how your modem and boot screen img(tmobile) wouldn't be affected by flashing f600 kdz to tmobile phone.
Click to expand...
Click to collapse
bro as i explained in detail that flashing H901 kdz on phone having different board in it cause it a brick so better to flash such kdz which is compatible with the board.... Be careful double check with your board model. (this is the most important part) Keep that in mind that if you are going to flash some other kdz it will not work and will brick your phone.
i have everything ready but lgup never found the phone as a MODEL.keep saying "unknown model".
i ve checked lg bridge it founds 2 updates (im on 5.1.1) , lgbridge founds both 6 and 7 updates.
i've downloaded the kdz file according to the bridge and and phone provider(tmobile)
but i don't know if i can flash it with LG flashtool besides LGUP.
Because i can not pass "unknown model" issue.
daraza said:
i have everything ready but lgup never found the phone as a MODEL.keep saying "unknown model".
i ve checked lg bridge it founds 2 updates (im on 5.1.1) , lgbridge founds both 6 and 7 updates.
i've downloaded the kdz file according to the bridge and and phone provider(tmobile)
but i don't know if i can flash it with LG flashtool besides LGUP.
Because i can not pass "unknown model" issue.
Click to expand...
Click to collapse
Read the Article carefully it says never update your phone using LG Bridge it will brick your phone, and for kdz please search lg firmware on google and download the relevant kdz as per the model of your Phone's board. Don't waste your time downloading wrong kdz and lg up is hard to setup... keep on searching you will sure find a fix soon. Do a deep google search (as i did) you will figure out what is the problem behind Lg UP
Wassalam Farooq
The issue is that my LG info says its : T-Mobile H901BK
It's on 5.1.1
I have the correct KDZ for Tmobile.
Using a win 10 64 bit OS.
Deep uninstalled all LG soft and drivers
then followed your advises step by step
but still "unknown model"
I need to make first LGup to let find the phone.
I m not sure if i have f600s motherboard.
do you have further advise ?
LG V10 T mobile getting too slow
Salam Bother,
I am new to this and I have joined because of my LG V10 as the mobile was working fine and suddenly it became very slow like if I click on any thing It will take about 2 to 3 seconds before opening and also some times mobile stopped responding and screen became black. I wanted to know if it is a software failure or any thing related to hardware? one thing more phone is turning on and there is no issue with network, wifi, camera even I can use any app on it but very slowly.
daraza said:
Wassalam Farooq
The issue is that my LG info says its : T-Mobile H901BK
It's on 5.1.1
I have the correct KDZ for Tmobile.
Using a win 10 64 bit OS.
Deep uninstalled all LG soft and drivers
then followed your advises step by step
but still "unknown model"
I need to make first LGup to let find the phone.
I m not sure if i have f600s motherboard.
do you have further advise ?
Click to expand...
Click to collapse
Bro first of all you need to confirm your phone board model using Lg info app ... you can find it on playstore for free and for lg up do all as i said above then turn off your phone remove the battery... plug in the usb cable... now install the battery while pressing volume up button it (make sure you lg up software is running) then your phone will directly go into download mode and Lg up will sure recognize your phone model but first of all confirm your phone's board model.
hariszaman said:
Salam Bother,
I am new to this and I have joined because of my LG V10 as the mobile was working fine and suddenly it became very slow like if I click on any thing It will take about 2 to 3 seconds before opening and also some times mobile stopped responding and screen became black. I wanted to know if it is a software failure or any thing related to hardware? one thing more phone is turning on and there is no issue with network, wifi, camera even I can use any app on it but very slowly.
Click to expand...
Click to collapse
Wslam.
Yar ap mjy whatsap py contact kro... will try to help you
i have F600s board
@hapyfaroq bhai i have h901 with f600s board. i updated via lg bridge but it is bricked in Qualcomm 9008 mode. maine kdz file download krli f600s ki. extract bhi karli kdz aur dz. QFIL se karne ki koshish kari thi lekin rawprogram0.xml aur patch.xml nahi mil rhi mujhe yar bhai help karo plzzz
whats your whatsapp num?
SandyKick said:
@hapyfaroq as you mentioned, you have flashed Marshmallow F600S20l_00_0503.kdz !!! and for Nougat you flashed F600L30e_00_0517.kdz !!! which are totally different models. could you please recheck if you typed F600L30e_00_0517.kdz istead of F600S30D_00_0510.kdz
Click to expand...
Click to collapse
did you get it done at any official service center or 3rd party service center?
kingvenkat07 said:
did you get it done at any official service center or 3rd party service center?
Click to expand...
Click to collapse
Done with normal software repair shop here in ameerpet Hyderabad charged 300 rupees
Related
I have been stuck for over a month now and now I am forced to make this thread with the full story:
I bought an LG G2 D802. A few months later I updated it through the LG software update tool. This thing killed my phone. It installed lollipop and I then had these issues:
[1]no imei.
[2]no baseband.(FIXED)
[3]touch is not working properly. It is haywire. It does not respond properly at all and the phone is unusable
[4]no sim usage as no IMEI.
[5] ONLY 16 gb showing as memory available. (FIXED)
I did this. Using OTG to use my phone, I flashed stock d802 ROM (kitkat). This got me to Stock ROM but phone was boot looping. I factory resetted and it started up okay. I then found a way to fix the 16 gb issue by using a droid view guide called : "Your 32GB LG G2 Shows only 16GB Storage Space? Here’s How to Fix the Issue! " This fixed my 16 gb issue. But everything else same... Then I followed a guide to fix ESN but it demanded that the phone be rooted. So I rooted and installed TWRP. But I was not able to fix IMEI. So I then gave up I searched my issue extensively and found a thread (ON XDA) which i cant post here... But its name is: "Strange touch problem after upgrading my lg g2". There I read of other people who had the same issues. This basically happens to refurbished handsets, apparently. There where no proper fixes there. None of the people where able to fix their phones.
Some guy said that check your motherboard and install the software according to the motherboard. I opened the board and found it to be a motherboard of LG D801. No problem. I downloaded D801 software and tried installing with kdz method but it failed. And now so has the tot method. I have downloaded over 20 gbs of different software and roms. ALl of these roms where completely downloaded!! Please help me here...
Its not me only: These threads are after the same issue!!:
1. Name is: (on XDA) "LG G2 No IMEI, Touch not Responding After Update" (One person)
2. Name is: (on XDA) "Strange touch problem after upgrading my lg g2" (MULTIPLE people withe SAME issue)
I am not an advanced android guy but I can follow directions and I have adb, root, twrp, qpst set up.
zhzhou said:
Can you be more specific on the error when using KDZ and TOT? Please post a screenshot.
Click to expand...
Click to collapse
The kdz method just fails at 2%. But the tot method works. I installed jellybean to see if that fixed the problem But no go. Still have no touch screen and no IMEI. The major problem right now is touch screen ONLY!
zhzhou said:
Which TOT did you install? D801 or D802? I think it should be D801 because it matches your motherboard.
Click to expand...
Click to collapse
I agree that I should install tot of d801 . But the install fails. I tried using the LG_UP 974 dll file but that does not work too! The error is alwasys wrong model number. The TOT method works for d802 roms.
I am wondering. Should I flash a kernel of d801?
hyelton said:
Well that can happen if you flashed the WRONG model for your phone, and youd need to flash the correct model to fix it.
or 2 its an hardware issue.
Click to expand...
Click to collapse
Hyelten some help would be dearly loved!
zhzhou said:
You should install the D801 TOT. Here's how to do it.
1) Download D801 TOT
2) Download HxD hex editor
3) Open D801 TOT in HxD
4) Find first instance of "D801" and change to "D802"
5) Save new TOT file
6) Open Flashtool and flash the modified D801 TOT that you just created (use the LG_UP974.dll)
This should work to get D801 firmware onto your device.
Click to expand...
Click to collapse
Any possibility of hard bricking my phone??
zhzhou said:
You should install the D801 TOT. Here's how to do it.
1) Download D801 TOT
2) Download HxD hex editor
3) Open D801 TOT in HxD
4) Find first instance of "D801" and change to "D802"
5) Save new TOT file
6) Open Flashtool and flash the modified D801 TOT that you just created (use the LG_UP974.dll)
This should work to get D801 firmware onto your device.
Click to expand...
Click to collapse
I did what you said and changed the first instance to d802. Now a new error dialog appears saying: "failed previousload()"
Hi, thank you for using XDA Assist. Your devices forum is the best place to ask for help, they are the experts on your device. Start with this, http://forum.xda-developers.com/lg-g2/general/lg-g2-sticky-roll-thread-t3123148 and follow the go back to stock. Also see this, http://forum.xda-developers.com/lg-g2
zhzhou said:
It's unlikely you'll hard brick the phone. You've already put the D802 firmware on a board that you've confirmed is D801.
I had wrong firmware and subsequently lost the IMEI. I flashed the right one firmware (after modifying TOT because of model mismatch error), and the IMEI came back.
Isn't your phone pretty much useless already? I think the steps I described above is pretty low risk. You can find the answer pretty quickly by just doing it
Click to expand...
Click to collapse
hyelton said:
Just follow that.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
This error!!! It just stops here...
Hi every one, in this guide i will share with you stock rom for lg v10 F600L and F600S. so lets do it
Notice ! : Befor we start do this at your own risk Do not take responsibility if you brick your devices :angel:
------------------------------------------- ------- ---------------------------------------------------------------
THIS THREAD IS JUST FOR COREAN VERSION LG V10 F600L & F600S ( F600K comming soon :fingers-crossed: )
Lets start : this guide will be through [ LGUP ] method :laugh:
1 - Download LGUP tool : https://www.fshare.vn/file/3GQ3Y94HUIRZ
2 - Download TOT firmware for LG V10 F600L https://www.fshare.vn/file/LEVWQMM1YG3S
3 - Download TOT firmware for LG V10 F600S : https://www.fshare.vn/file/9RQ579IHMG4V
4 - Unzip floader then install LGUP_8994_DLL first and then LGUP
5 - Start LGUP programme on your computer "make sure your phone is plugged in"
6 - If you have a problem that LGUP does not see your LG V10, leave your mobile connected via USB and leave LGUP running,
restart your mobile, hopefully this will solve the problem.
( if the programme does not start or somthing went wrong,just copy-past it on C:\Program Files (x86)\LG Electronics\LGUP\model and run it again ( inside the floder ),hopefully this will solve the problem.)
7 Click on FILE PATH and select your TOT firmware,Close LGUP and re-open it. Make sure you select REFURBISH this will do a full wipe, tick BIN file. Press Start. its make a lot of time please be patient
Et voilaa you're already running on LG V10 F600 L/S stock 5.1 lollipop
LGUP Video Guide - Thanks to @KiaTheKing https://www.youtube.com/watch?v=iPKcuYwDoxY
===> PLEASE HIT THANKS BUTTON :good:
What do we win or lose with this?
Will we be able to get an OTA after this?
partymola said:
What do we win or lose with this?
Will we be able to get an OTA after this?
Click to expand...
Click to collapse
return to stock 5.1 so i think you will be able to get OTA
deleco said:
Hi every one, in this guide i will share with you stock rom for lg v10 F600L and F600S. so lets do it
Notice ! : Befor we start do this at your own risk Do not take responsibility if you brick your devices :angel:
------------------------------------------- ------- ---------------------------------------------------------------
THIS THREAD IS JUST FOR COREAN VERSION LG V10 F600L & F600S ( F600K comming soon :fingers-crossed: )
Lets start : this guide will be through [ LGUP ] method :laugh:
1 - Download LGUP tool : https://www.fshare.vn/file/3GQ3Y94HUIRZ
2 - Download TOT firmware for LG V10 F600L https://www.fshare.vn/file/LEVWQMM1YG3S
3 - Download TOT firmware for LG V10 F600S : https://www.fshare.vn/file/9RQ579IHMG4V
4 - Unzip floader then install LGUP_8994_DLL first and then LGUP
5 - Start LGUP programme on your computer "make sure your phone is plugged in"
6 - If you have a problem that LGUP does not see your LG V10, leave your mobile connected via USB and leave LGUP running,
restart your mobile, hopefully this will solve the problem.
( if the programme does not start or somthing went wrong,just copy-past it on C:\Program Files (x86)\LG Electronics\LGUP\model and run it again ( inside the floder ),hopefully this will solve the problem.)
7 Click on FILE PATH and select your TOT firmware,Close LGUP and re-open it. Make sure you select REFURBISH this will do a full wipe, tick BIN file. Press Start. its make a lot of time please be patient
Et voilaa you're already running on LG V10 F600 L/S stock 5.1 lollipop
LGUP Video Guide - Thanks to @KiaTheKing https://www.youtube.com/watch?v=iPKcuYwDoxY
===> PLEASE HIT THANKS BUTTON :good:
Click to expand...
Click to collapse
Hello,
If i'm not mistaken, these files are used for the rooting method shared by LGviet.com forum.
These files are "F600l10irootedsystem.rar" and "LGF600SATV10msystemROOTED.rar"
So, what do you mean when you say this is the stock rom ?
ngocthach904 said:
Hello,
If i'm not mistaken, these files are used for the rooting method shared by LGviet.com forum.
These files are "F600l10irootedsystem.rar" and "LGF600SATV10msystemROOTED.rar"
So, what do you mean when you say this is the stock rom ?
Click to expand...
Click to collapse
stock rom roted
This is a rooted version for Korean F600L?
No is not root
sb erb said:
This is a rooted version for Korean F600L?
Click to expand...
Click to collapse
yes its rooted
Hello,
Sorry but I have followed the whole process and I can assure you that my V10 is not Root.
Tell me the complete procedure that you follow !!!
I started my V10 excatement as before
Images
I agree I followed and got no root also
no root
deleco said:
Hi every one, in this guide i will share with you stock rom for lg v10 F600L and F600S. so lets do it
Notice ! : Befor we start do this at your own risk Do not take responsibility if you brick your devices :angel:
------------------------------------------- ------- ---------------------------------------------------------------
THIS THREAD IS JUST FOR COREAN VERSION LG V10 F600L & F600S ( F600K comming soon :fingers-crossed: )
Lets start : this guide will be through [ LGUP ] method :laugh:
1 - Download LGUP tool : https://www.fshare.vn/file/3GQ3Y94HUIRZ
2 - Download TOT firmware for LG V10 F600L https://www.fshare.vn/file/LEVWQMM1YG3S
3 - Download TOT firmware for LG V10 F600S : https://www.fshare.vn/file/9RQ579IHMG4V
4 - Unzip floader then install LGUP_8994_DLL first and then LGUP
5 - Start LGUP programme on your computer "make sure your phone is plugged in"
6 - If you have a problem that LGUP does not see your LG V10, leave your mobile connected via USB and leave LGUP running,
restart your mobile, hopefully this will solve the problem.
( if the programme does not start or somthing went wrong,just copy-past it on C:\Program Files (x86)\LG Electronics\LGUP\model and run it again ( inside the floder ),hopefully this will solve the problem.)
7 Click on FILE PATH and select your TOT firmware,Close LGUP and re-open it. Make sure you select REFURBISH this will do a full wipe, tick BIN file. Press Start. its make a lot of time please be patient
Et voilaa you're already running on LG V10 F600 L/S stock 5.1 lollipop
LGUP Video Guide - Thanks to @KiaTheKing https://www.youtube.com/watch?v=iPKcuYwDoxY
===> PLEASE HIT THANKS BUTTON :good:
Click to expand...
Click to collapse
IS it already rooted stock rom?
hoi_lai said:
IS it already rooted stock rom?
Click to expand...
Click to collapse
it should be rooted,but there are some people here unable to gaint root acces :/ any way i will take a lock later
Hey guys, I'm trying to find a phablet with no smaller than 5.7 display, if I can't root it I don't want it. I'm on Verizon and am do for an upgrade. What would everyone recommend buying for rooting? Bootloader isn't a must have but it would be nice. Just need help picking out a good device. Thanks!!!
Sent from my Nexus 6 using Tapatalk
Only t-mobile version has unlocked bootloader and root.
There are the 2 dual sim versions that have recently achieved root without bootloader unlock.
Those are the only v10s so far to have any root access.
Sent from my pretty nifty brand new LG V10
deleco said:
Hi every one, in this guide i will share with you stock rom for lg v10 F600L and F600S. so lets do it
Notice ! : Befor we start do this at your own risk Do not take responsibility if you brick your devices :angel:
------------------------------------------- ------- ---------------------------------------------------------------
THIS THREAD IS JUST FOR COREAN VERSION LG V10 F600L & F600S ( F600K comming soon :fingers-crossed: )
Lets start : this guide will be through [ LGUP ] method :laugh:
1 - Download LGUP tool : https://www.fshare.vn/file/3GQ3Y94HUIRZ
2 - Download TOT firmware for LG V10 F600L https://www.fshare.vn/file/LEVWQMM1YG3S
3 - Download TOT firmware for LG V10 F600S : https://www.fshare.vn/file/9RQ579IHMG4V
4 - Unzip floader then install LGUP_8994_DLL first and then LGUP
5 - Start LGUP programme on your computer "make sure your phone is plugged in"
6 - If you have a problem that LGUP does not see your LG V10, leave your mobile connected via USB and leave LGUP running,
restart your mobile, hopefully this will solve the problem.
( if the programme does not start or somthing went wrong,just copy-past it on C:\Program Files (x86)\LG Electronics\LGUP\model and run it again ( inside the floder ),hopefully this will solve the problem.)
7 Click on FILE PATH and select your TOT firmware,Close LGUP and re-open it. Make sure you select REFURBISH this will do a full wipe, tick BIN file. Press Start. its make a lot of time please be patient
Et voilaa you're already running on LG V10 F600 L/S stock 5.1 lollipop
LGUP Video Guide - Thanks to @KiaTheKing https://www.youtube.com/watch?v=iPKcuYwDoxY
===> PLEASE HIT THANKS BUTTON :good:
Click to expand...
Click to collapse
I have opened my back to stock guide now with KDZ files http://forum.xda-developers.com/lg-v10/general/guide-lg-v10-stock-firmware-to-stock-t3224170
mwebb34 said:
Hey guys, I'm trying to find a phablet with no smaller than 5.7 display, if I can't root it I don't want it. I'm on Verizon and am do for an upgrade. What would everyone recommend buying for rooting? Bootloader isn't a must have but it would be nice. Just need help picking out a good device. Thanks!!!
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
rooting will be avlaible soon for differente version of divices,like lg v10 all version ,think to buy a nexus 6p it have already root acces
@deleco I uploaded some mirrors in my back to stock thread if you'd like to use them. It look about 3 hours to download from your OP links.
I bought the v10 Verizon varrient. Hopfully this thing will see root
Sent from my VS990 using Tapatalk
:crying:
My issues is quite complicated. Please be patient and read on.
Less than a week ago, I bought an LG G3 D855. It wasn't brand new and definitely out of warranty.
It was on the 4.4.2 Os version but I couldn't update it because I couldn't locate the UPDATE CENTER and after some research online, I found out it was because it was rooted. I couldn't find a Supersu application anywhere on the phone anyways but Root checker confirmed that it was rooted.
I downloaded the stock kitkat firmware in a .tot format and I tried flashing using LG Flash Tool for TOT but it failed because "Device version is different"
I checked the Imei online and it stated that the device is a Sprint LS990 but the details embedded in the phone all say it is D855
I checked online and found a couple of posts about this error and one user said he was able to fix it by flashing the actual Sprint .tot with the lg flash tool. I tried that but it didn't work. It still said "Device version is different. Check BIN or dll"
I checked online and found results pointing to a generic .dll file for G3s and I downloaded it but when I used it on the Flash tool, it resulted to an error "CrossDL blah blah"
So I found a Marshmallow kdz file. LGUP won't see my device model so I was able to flash it after editting the software in my build.prop to D85510n.
***I have always changed the port to COM41 in all the steps I used
The LG UP detected my model and it flashed to 100% but got stuck on a bootloop by loading the lg screen, freezing and restarting by it self. It never gets to the homescreen.
I downloaded lollipop kdz reflashed using LGUP in a form of downgrade and it got to 100% and got stuck at the lg screen while trying to reboot.
I redownloaded the stock kitkat rom and used the Lg flash tool but it failed. It said 'PID null IMEI Null"
I used LGUP to reflashed. It came to my understanding that the LGUP can flash both kdz and tot. So it flashed to 100% but got stuck at the lg screen and I have tried all I can but it is stuck. It can go into download tho. I don't know what to do about the IMEI. I don't know if the last flash retrieved it. I don't kniw what to do.
It no longer shows as LGE AndroidNet USB Serial
Please can anyone help me?
I just need my phone to work again. I was stubborn and now I regret it. I should have just stuck to kitkat. I'm so desperate to get my phone working that I wouldn't mind Android Froyo Os if it was ever possible.
PLEASE HELP!!!
I have bought the v10 2days ago and it was on android 5.1 lolipop and it was working very good till i updated the system to ofw marshmilo 6.0 the device started getting errors like LG vpn has stopped.and the menu of finger print scanner is not opening any more it shows unfortunately process ha stoppe"com.android.setting.".and i noticed that it doesn't allow me to uninstall apps. bte i did a hard reset but it didn't help. does anyone can help please? the device is un rotted btw
You can flash the latest kdz via LG UP available in other thread. Hopefully it will solve the problem.
omarehab636 said:
I have bought the v10 2days ago and it was on android 5.1 lolipop and it was working very good till i updated the system to ofw marshmilo 6.0 the device started getting errors like LG vpn has stopped.and the menu of finger print scanner is not opening any more it shows unfortunately process ha stoppe"com.android.setting.".and i noticed that it doesn't allow me to uninstall apps. bte i did a hard reset but it didn't help. does anyone can help please? the device is un rotted btw
Click to expand...
Click to collapse
Like what the other guy said, try flashing new kdz. And if that works, let us know please
Shadow Assassin said:
Like what the other guy said, try flashing new kdz. And if that works, let us know please
Click to expand...
Click to collapse
Exactly the same problem with my phone. Installed h90021w_00_0921 via LGUP, and now can't downgrade
Thats exact problem am goin through
count me in, thats exactly what happened to me
i also tried the REFURBISH option via LGUP with no luck can't downgrade,
tried flashing the rooted h900 TOT it fails stating this is a downgrade and its not possible :'(
me too the sam problem
I have the same problem, what to do ?
omarehab636 said:
I have bought the v10 2days ago and it was on android 5.1 lolipop and it was working very good till i updated the system to ofw marshmilo 6.0 the device started getting errors like LG vpn has stopped.and the menu of finger print scanner is not opening any more it shows unfortunately process ha stoppe"com.android.setting.".and i noticed that it doesn't allow me to uninstall apps. bte i did a hard reset but it didn't help. does anyone can help please? the device is un rotted btw
Click to expand...
Click to collapse
It seems that one of the users (another threath LG H900 5.1 > 6.0 problem) is right and I upload software h900 6.0 via KDZ via TOT even via octopus and nothing, even the same error is possible that the main card is not h900 but another variant?, He says he solved the problem by loading vs900 software because the main card was not h900 but refurbished vs900.
I opened the phone and I was right, now i am going to load the correct software and tell you.
JeseMazari said:
It seems that one of the users (another threath LG H900 5.1 > 6.0 problem) is right and I upload software h900 6.0 via KDZ via TOT even via octopus and nothing, even the same error is possible that the main card is not h900 but another variant?, He says he solved the problem by loading vs900 software because the main card was not h900 but refurbished vs900.
I opened the phone and I was right, now i am going to load the correct software and tell you.
Click to expand...
Click to collapse
Did it work?
https://youtu.be/vZ-hf763D20
Once you confirm the model of your phone and I find myself developing a tutorial to load the kdz but only if the version is equal to or higher than the one they currently have downgrading kills LG phones with antirollback
JeseMazari said:
It seems that one of the users (another threath LG H900 5.1 > 6.0 problem) is right and I upload software h900 6.0 via KDZ via TOT even via octopus and nothing, even the same error is possible that the main card is not h900 but another variant?, He says he solved the problem by loading vs900 software because the main card was not h900 but refurbished vs900.
I opened the phone and I was right, now i am going to load the correct software and tell you.
Click to expand...
Click to collapse
can you please put the link to which you updated your phone to and it solved the problem
This is a simple method to restore your v20 to stock, I have tried with my bricked H990DS with wrong bootloader flashed.
1. Download .kdz file for your v20 model from the following links. Currently v20 models available are:
F800K, F800L, F800S, H915, H918TN, H990, VS995, H990N and H990DS
H990DS https://lg-firmwares.com/lg-h990ds-firmwares/firmwares/
H990N https://lg-firmwares.com/lg-h990n-firmwares/firmwares/
https://lg-firmwares.com/
2. Search, download and install LGUP ( LGUP_Store_Frame_Ver_1_14_3.msi ) and a file called LGUP_common.dll
2a. Copy the LGUP_common.dll to C:\Program Files (x86)\LG Electronics\LGUP\model\common (May need to modify folder access right)
3. Search, download and install LG Driver ( LGMobileDriver_WHQL_Ver_4.1.1.exe )
4. Completely Power off the v20 ( or to remove and put the battery back )
5. Plug the USB end of sync cable to your PC
6. Press and hold "Volume Up"
7. Plug in the USB-C end of sync cable to the v20. The phone will enter download mode (or Firmware Update). Now you can release the "Volume Up".
8. Run LGUP. The program will regconise the v20.
9. At the file path, click "..." and chose the .kdz file
10.Choose "UPGRADE"
11.Click "Start" and wait until the process is complete.
Now we have a safe method of restoring bricked v20. Hope developers can start trying to root without worrying of bricking the phone.
This method is verified on my H990DS. If anybody successfully flash using this method please let us know. Thanks!
Great thread! Just want to add a quick PSA for this:
This may update your phone to the latest firmware which may patchs the current recowvery exploit. While this will unbrick your phone, you should make sure that you have the a firmware below 10i (w/o patch) to flash. If you still have access to TWRP and don't have a 10d firmware for your device, use this instead.
funkeywoookey said:
Great thread! Just want to add a quick PSA for this:
This will update your phone to the latest firmware, 10i (your phone came with 10d). The latest firmware patches the current recowvery exploit we use to root our V20s. While this will unbrick your phone, it should be used a last resort for those still using the 10d firmware and have access to TWRP (use this instead).
Click to expand...
Click to collapse
Thanks for the reminder. Actually it depends on what .kdz is available. For H990DS there is actually v10b firmware for download. So after I flash using this method the dirtycow exploit is still there. Take a look at the filename of the .kdz (e.g. 990ds10b_00_OPEN_TW_DS_OP_1125.kdz is v10b released at Nov 25) Seems that versions below v10i are still ok for dirtycow.
ahlok_hk said:
Thanks for the reminder. Actually it depends on what .kdz is available. For H990DS there is actually v10b firmware for download. So after I flash using this method the dirtycow exploit is still there. Take a look at the filename of the .kdz (e.g. 990ds10b_00_OPEN_TW_DS_OP_1125.kdz is v10b released at Nov 25) Seems that versions below v10i are still ok for dirtycow.
Click to expand...
Click to collapse
Ahh! Nice! Hadn't considered that. I'll update my OP
Darn. Got my hopes up. No VS995 in the list. No T-Mobile and no Sprint either. I don't need it....yet...but I would love to have a restore method for my VS995. Though I've had an LG G3 rooted and flashing custom roms, kernels, and mods for 30 months and never once restored it to stock so perhaps the V20 will be the same
ahlok_hk said:
This is a simple method to restore your v20 to stock, I have tried with my bricked H990DS with wrong bootloader flashed.
1. Download .kdz file for your v20 model from the following links. Currently v20 models available are:
F800K, F800L, F800S, H915, H918TN, H990, H990N and H990DS
http://lg-firmwares.com/category/lg-series/lg-v20-dual/
http://lg-firmwares.com/category/lg-series/lg-v20/
2. Search, download and install LGUP ( LGUP_Store_Frame_Ver_1_14_3.msi )
3. Search, download and install LG Driver ( LGMobileDriver_WHQL_Ver_4.1.1.exe )
4. Completely Power off the v20 ( or to remove and put the battery back )
5. Plug the USB end of sync cable to your PC
6. Press and hold "Volume Up"
7. Plug in the USB-C end of sync cable to the v20. The phone will enter download mode (or Firmware Update). Now you can release the "Volume Up".
8. Run LGUP. The program will regconise the v20.
9. At the file path, click "..." and chose the .kdz file
10.Choose "UPGRADE"
11.Click "Start" and wait until the process is complete.
Now we have a safe method of restoring bricked v20. Hope developers can start trying to root without worrying of bricking the phone.
This method is verified on my H990DS. If anybody successfully flash using this method please let us know. Thanks!
Click to expand...
Click to collapse
are you using uppercut for the model .dll in LGUP?
i have tried this method a few times over the last week, no luck. but i was pretty rough with my phone to be honest, no backup and tried all the other v20 variant roms.
right now LGUP detects my phone as a US99610D so will not flash the H990DS firmware, tried to edit the kdz in hex editor for name value but it detects the kdz as corrupt now. any experience with this?
881jz said:
are you using uppercut for the model .dll in LGUP?
i have tried this method a few times over the last week, no luck. but i was pretty rough with my phone to be honest, no backup and tried all the other v20 variant roms.
right now LGUP detects my phone as a US99610D so will not flash the H990DS firmware, tried to edit the kdz in hex editor for name value but it detects the kdz as corrupt now. any experience with this?
Click to expand...
Click to collapse
I did not use uppercut because anti-virus reported it detect trojan when I use the program.
ahlok_hk said:
I did not use uppercut because anti-virus reported it detect trojan when I use the program.
Click to expand...
Click to collapse
so you found a v20 dll file? do you mind posting a link? or how did you get past LGUP picking up v20 as unknown device? or was this not an issue for you?
881jz said:
so you found a v20 dll file? do you mind posting a link? or how did you get past LGUP picking up v20 as unknown device? or was this not an issue for you?
Click to expand...
Click to collapse
The LGUP first did not detect the device and asked for driver. So I installed the driver as mentioned in OP. After that i was able to flash the phone with the kdz file.
Pleaseeeee helllllpppppp !!!!!!!
IS THERE AN KDZ FILE FOR SPRINT V20 VERSION LS997 PLEASEEEE HELPPPPP I WILL SHARE AND SUB AND WHAT YOU WANT PLEASSSSEEEEE HELPPP !!!!!!!:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Spider Monkey said:
IS THERE AN KDZ FILE FOR SPRINT V20 VERSION LS997 PLEASEEEE HELPPPPP I WILL SHARE AND SUB AND WHAT YOU WANT PLEASSSSEEEEE HELPPP !!!!!!!:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
If you know your phone's IMEI number try here:
http://www.rootjunky.com/tag/kdz/
Since some user report this method may not work. Would moderator pls close this thread. Thanks.
There is no any link in the page
I HAVE DO SUCH AS THE EXAMPLE BUT THERE IS NOT ANY LINK IN THE PAGE PLEASEEEE HELPE IS THERE ANY METHOD ELSE
???????:crying::crying::crying:
ahlok_hk said:
Since some user report this method may not work. Would moderator pls close this thread. Thanks.
Click to expand...
Click to collapse
What do you mean?
If this method worked for you & a few other users, it should probably become a sticky rather than closing the thread...
Unbricking a device & restoring to 100% stock is an important feature to most, so if a few users are having issues we should probably help sort out those issues rather than abandoning the thread...
---------- Post added at 03:51 AM ---------- Previous post was at 03:46 AM ----------
Spider Monkey said:
I HAVE DO SUCH AS THE EXAMPLE BUT THERE IS NOT ANY LINK IN THE PAGE PLEASEEEE HELPE IS THERE ANY METHOD ELSE
???????:crying::crying::crying:
Click to expand...
Click to collapse
Just use google
http://www.google.com/search?q=LGUP_Store_Frame_Ver_1_14_3.msi&ie=utf-8&oe=utf-8&client=firefox-b&gfe_rd=cr&ei=ToNeWP79C8Xr8Afvwb6gAQ&gws_rd=cr
&
http://www.google.com/search?q=LGMobileDriver_WHQL_Ver_4.1.1.exe&ie=utf-8&oe=utf-8&client=firefox-b&gfe_rd=cr&ei=1yVfWJGROa_r8AfD9Y_wAg
Anybody confirm working on verizon
Verizon is not listed, so....no
Sent from my VS995 using Tapatalk
Hi I have a lg v20 h918tn and it was rooted with the TWRP ... but my friend messed it up with the recovery mode when he tried to factory reset and he didn't know what he was doing... I can't reboot into system now.. everytime I intall the stock rom when it finishes it always go back to twrp ... I kinda don't get all your info I'm an amateur in all this please help.
Spider Monkey said:
IS THERE AN KDZ FILE FOR SPRINT V20 VERSION LS997 PLEASEEEE HELPPPPP I WILL SHARE AND SUB AND WHAT YOU WANT PLEASSSSEEEEE HELPPP !!!!!!!:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Spider Monkey you are not alone.
ahlok_hk said:
Since some user report this method may not work. Would moderator pls close this thread. Thanks.
Click to expand...
Click to collapse
don't close it off, if it worked for you it should work for others that haven't broken the phone quite as much as me (boot, recovery, aboot and system changed).
the dll looks to be a requirement, perhaps uppercut worked for you prior to you AV killing it. i used it despite the AV alert.
so that part works fine, my phone is detected as version US99610d (files used during root attempt) which prevents me running the KDZ with "Error: KDZ file is invalid. US996 -> H990"
i tried to edit KDZ file to change version from H990 to US996 but this just corrupted the file.
i edited the model in build.prop of a rom and flashed it but it failed to make a difference to LGUP.
in a last ditch effort i restored aboot.img but phone is still detected as 996 instead of 990. but now no more twrp or unlocked bootloader.
any idea what LGUP reads the version info from or how to force it to run a KDZ from a different model?
abel_dlg said:
Hi I have a lg v20 h918tn and it was rooted with the TWRP ... but my friend messed it up with the recovery mode when he tried to factory reset and he didn't know what he was doing... I can't reboot into system now.. everytime I intall the stock rom when it finishes it always go back to twrp ... I kinda don't get all your info I'm an amateur in all this please help.
Click to expand...
Click to collapse
Perhaps this will help: http://forum.xda-developers.com/v20/how-to/restore-h918-to-100-stock-requires-twrp-t3504798