Sony Xperia C bricked down after flashing CWM recovery through mobile uncle - Sony Xperia C

Hi .... :crying: :crying:
I rooted my xperia c device then i installed mobile uncle and started to flashing CWM recovery
I did it successfully then it said " boot into recovery mod " i pressed " ok "
the phone switched off and didn't switch on again
i tried to switch it on but phone doesn't respond
Just sensor next to front camera is lighted and when i connect the charger the screen doesn't light only the led give red color for some time then disappear ..... help please :crying: !!

Related

[Q] Softbricked Xperia J

Hi guys
I tried installing CWM on my rooted xperia j...ran the install.bat file from the unzipped file as mentioned..thing is, when i restarted my phone, it started bootlooping..showing a red led and the battery symbol after the sony logo..tried flashing the kernal again but no luck..any suggestions?
IrvinPinto said:
Hi guys
I tried installing CWM on my rooted xperia j...ran the install.bat file from the unzipped file as mentioned..thing is, when i restarted my phone, it started bootlooping..showing a red led and the battery symbol after the sony logo..tried flashing the kernal again but no luck..any suggestions?
Click to expand...
Click to collapse
More details, please What soft were you running, what kernel were you flashing.
Notice that CWM is only for ICS!
wnerw said:
More details, please What soft were you running, what kernel were you flashing.
Notice that CWM is only for ICS!
Click to expand...
Click to collapse
ok..so i got it now...damn..i cant seem to install a custom ROM now..cant get the device into recovery mode without flashing the kernal..
tried installing ParanoidAndroid custom ROM on my rooted ST26i firmware ver 11.2.A.0.21 but just goes into bootloops once i install the zip file and restart..
i rooted the phone like so....
http://forum.xda-developers.com/showthread.php?t=2183737
cant get the phone into recovery mode
IrvinPinto said:
Hi guys
I tried installing CWM on my rooted xperia j...ran the install.bat file from the unzipped file as mentioned..thing is, when i restarted my phone, it started bootlooping..showing a red led and the battery symbol after the sony logo..tried flashing the kernal again but no luck..any suggestions?
Click to expand...
Click to collapse
Try flashing the stock rom, it worked for me!!!!!!
the same thing hapenned to me too
Okay so I seem to have soft bricked my Xperia J too
Only this time I can't seem to get into Flash mode or Recovery mode!
Holding/Pressing Vol+ doesn't bring up the blue LED and the phone doesn't vibrate at all.
Likewise for Vol+. Nothing happens and the phone remains stuck on the Sony boot logo.
Any idea what I could do? (USB isn't recognised on PC either so I can't connect that way.)
Edit: Okay scratch that, randomly button mashing Volume DOWN seemed to work for me. Only took about 50 or so reboots
Sony`s PC Companion can repair Boot Up problems after CWM install faild
Just watch this video on youtube and follow exactly the description on your PC Companion. Just search for this video on youtube "How to fix a (soft) bricked Sony Xperia Play( any Xperia )EASY METHOD, when stuck on the Sony logo"
Wanted to post the Link but it`s not allowed before posted at last ten contributions - sorry for that (XDA rules!)
This will fix all Xperia Models - it works so easy and pretty fast (about 20 minutes) and after that you have a phone just like brand new from the dealer with the latest software rolled out for your device in your country - sweet
Pls help me S1 fastboot prblm
Jampony said:
Okay so I seem to have soft bricked my Xperia J too
Only this time I can't seem to get into Flash mode or Recovery mode!
Holding/Pressing Vol+ doesn't bring up the blue LED and the phone doesn't vibrate at all.
Likewise for Vol+. Nothing happens and the phone remains stuck on the Sony boot logo.
Any idea what I could do? (USB isn't recognised on PC either so I can't connect that way.)
Edit: Okay scratch that, randomly button mashing Volume DOWN seemed to work for me. Only took about 50 or so reboots
Click to expand...
Click to collapse
My phone is not detected due to the driver problem !
Cannot get into fastboot mode !
I use Windows 7 32bit ..... the s1fastboot driver is not getting installed correctly !!
Why bother with Fastboot mode, use flashmode or SEUS to Repair ur phone....

[Q] Sony Xperia J problem

Hi,
I have installed CMW in my mobile and when enter cmw recovery my phone is reset and now can not run.
When turn on my mobile, so I will turn logo charger and mobile turn of and whe mobile charging soo lights red led.
Pls help what happend??
Thank you
Flash stock rom thru odin ..search on google for stock rom of your device
Sent from my GT-S5830i using Tapatalk 2
fanatik15 said:
Hi,
I have installed CMW in my mobile and when enter cmw recovery my phone is reset and now can not run.
When turn on my mobile, so I will turn logo charger and mobile turn of and whe mobile charging soo lights red led.
Pls help what happend??
Thank you
Click to expand...
Click to collapse
flash stock rom using flashtool.....or u can flash stock kernel for ur phone....

Sony Xperia lt18i (ARC S) does not start, Help

Hi very good day, I have a Sony ARC S .. I installed the CWM to flash a rom .. and I gave her a wipe cache and partition .. and then I went to storage and gave it to reformat the system .. time to turn the phone stays in sony .. can not go to cwm .. try desbrickearlo with flashtool .. but the big problem is when I connect the mobile to the computer .. I press the back button the green light turns on .. I enter .. ok .. flashtool recognizes the phone .. but only after cell latches, and connection with the flashtool is deactivated and is no longer recognized ....
That's the problem, the mobile is turned on in 30 seconds and can not flash it with flashtool
Forgive me for the misspelling, I'm using the google translator ..
Hopefully you can help me friends

[Completed] My xperia c4 dual (e5363) hard bricked

Hey guys i regularly follow ur posts and those are really helpful but its the first time i am writing as i am ****ed up with my xperia c4 device. Recently i upgraded my xperia c4 to android 6.0.1 marshmallow using your flash tool flash method as i had unlocked my bootloader. after that i found that my device isn't booting into recovery mode. whenever i tried to boot into recovery it stucks at sony xperia logo and after some while it restarts automatically to the system. So i thought the recovery might be deleted when i was flashing the firmware. i was using twrp recovery made by u guys
PHP:
http://forum.xda-developers.com/xperia-c5-ultra/development/bootloader-unlocked-custom-recovery-t3285521
so I flashed that again using fastboot mode and it failed to flash and after that my phone gone totally black. Now none of the switches are working when pressing the power key its not even vibrating. when plugging it to pc via usb top notification led shows red and its not blinking. and the phone is automatically disconnecting after a while. i tried to flash the rom again through flash tool but it is showing "the device is connected usb debugging is off".
I am going crazy. please guys help me to fix this.:crying:
Thanks
Kirito69 said:
Hey guys i regularly follow ur posts and those are really helpful but its the first time i am writing as i am ****ed up with my xperia c4 device. Recently i upgraded my xperia c4 to android 6.0.1 marshmallow using your flash tool flash method as i had unlocked my bootloader. after that i found that my device isn't booting into recovery mode. whenever i tried to boot into recovery it stucks at sony xperia logo and after some while it restarts automatically to the system. So i thought the recovery might be deleted when i was flashing the firmware. i was using twrp recovery made by u guys
PHP:
http://forum.xda-developers.com/xperia-c5-ultra/development/bootloader-unlocked-custom-recovery-t3285521
so I flashed that again using fastboot mode and it failed to flash and after that my phone gone totally black. Now none of the switches are working when pressing the power key its not even vibrating. when plugging it to pc via usb top notification led shows red and its not blinking. and the phone is automatically disconnecting after a while. i tried to flash the rom again through flash tool but it is showing "the device is connected usb debugging is off".
I am going crazy. please guys help me to fix this.:crying:
Thanks
Click to expand...
Click to collapse
Greetings and welcome to assist. I can see you have already found the correct place to ask your question here
http://forum.xda-developers.com/showthread.php?t=3370395
so I'll close this one up
Good Luck
Sawdoctor

help,i got hard bricked my Micromax canvas Knight2(E471)

I think i flashed the wrong ROM by mistake in canvas knight2 by twrp and after completing the installation there was option to reboot the phone and after tapping on it the phone becomes dead completely, nothings happening while pressing the power button , not going in recovery mode and don't showing the charging logo when I put it on charge , plz somebody help me :crying:
nishkarsh3696 said:
I think i flashed the wrong ROM by mistake in canvas knight2 by twrp and after completing the installation there was option to reboot the phone and after tapping on it the phone becomes dead completely, nothings happening while pressing the power button , not going in recovery mode and don't showing the charging logo when I put it on charge , plz somebody help me :crying:
Click to expand...
Click to collapse
I think you hard bricked your android. First connect your android to PC via USB and check it detects Qualcomm 9008 port in device manager. If yes then use qfil tool to flash your stock os to your android.
my phone micromax canvas night 2 hardbrick. dont show the boot logo.only show the penkin photo phone switch on mode...flashing proceess is compleate but dont boot the device only vibrate and show the penkin photo...what is this problem my phone please help...only fast boot flashing available in net any other flashing process in this phone ...so please help..

Categories

Resources