[Q] Sony Xperia J problem - General Questions and Answers

Hi,
I have installed CMW in my mobile and when enter cmw recovery my phone is reset and now can not run.
When turn on my mobile, so I will turn logo charger and mobile turn of and whe mobile charging soo lights red led.
Pls help what happend??
Thank you

Flash stock rom thru odin ..search on google for stock rom of your device
Sent from my GT-S5830i using Tapatalk 2

fanatik15 said:
Hi,
I have installed CMW in my mobile and when enter cmw recovery my phone is reset and now can not run.
When turn on my mobile, so I will turn logo charger and mobile turn of and whe mobile charging soo lights red led.
Pls help what happend??
Thank you
Click to expand...
Click to collapse
flash stock rom using flashtool.....or u can flash stock kernel for ur phone....

Related

[Q] needed help urgently

i rooete my tipo succesfully and as per instructions inandroidgadjematic website i flashed my mobile by instruction fastboot flash boot boot.img and then i restart my tipo from that time to now it not on at first it vibrates i got tensed and i remov my battery and retstart again and try to bring it in recovery mode (by holding volume + button and connect usb) a red led is blinking at top of my tipo pls help me if ihold power button then also the red led blinks pls tell me suggestions may i correct me tipo myself or i have to visit sony service pls pls rely me fast
U can use sony update service . For flashing .
Sent from my ST21i2 using xda app-developers app
Did you unlock bootloader?
Flash ftf file with flashtool in flashmode. Then unlock bootloader, then fastboot kernel again. It will work.
Also first cahrge your battery, led red blinking could mean low battery.
Although someone said you just need to unlock bootloader, that will do, but I suggest try flashing ftf first , then doing it.
Sent from my ST27i

[Q] micromax a110 is not working

hey there..i need some serious help!!! my micromax a110 is not working:crying::crying: it so happened that my cell suddenly got switched off..n den when i tried to switch it on it didnt start. just the starting screen appears and then it goes dead..then again the starting screen appears and it goes dead:crying::crying::crying:..please help me!!!! someone??? anyone???
try getting into recovery (vol + or - and pwr) and make a full wipe. if it will not power on, try flashing a new firmware. make sure you got the right one!
if u have cwm added then try to go to recovery n flash any custom rom of C2
if not then
Flash Stock rom using Sp tool it will Solve ur problem
dewdrops said:
hey there..i need some serious help!!! my micromax a110 is not working:crying::crying: it so happened that my cell suddenly got switched off..n den when i tried to switch it on it didnt start. just the starting screen appears and then it goes dead..then again the starting screen appears and it goes dead:crying::crying::crying:..please help me!!!! someone??? anyone???
Click to expand...
Click to collapse
I think it's out of charge, just plug in the charger and see what happens..
yog12 said:
if u have cwm added then try to go to recovery n flash any custom rom of C2
if not then
Flash Stock rom using Sp tool it will Solve ur problem
Click to expand...
Click to collapse
i tried doing that but thats not working...can you please tell me the procedure?
Lets Start
dewdrops said:
i tried doing that but thats not working...can you please tell me the procedure?
Click to expand...
Click to collapse
1)Install Drivers.
2)Open SP tool
3)Select 'Android Scatter file' inside ROM folder.
4)Click Firmware->Upgrade Button.
5)Connect Phone{Switched off} to PC via USB Cable.
6If everythings right,Flashing will proceed..
7)Wait till It finishes..A green ring is displayed on completion..
8))Now Close SP tool..Remove Phone from PC..
9)Switch ON the phone...It is successfully Flashed...:laugh:
I also face same problem some time when I make Factory or DRM reset
Green Android Robo with rotating frame
Start again and again. No switch off .. No effect after remove battery..
Only 1 solution "Do flash with SP Tool"
dewdrops said:
i tried doing that but thats not working...can you please tell me the procedure?
Click to expand...
Click to collapse
Hey no worries.. just follow my dis thread 'unbrick bricked canvas 2' :thumbup:
Link: http://forum.xda-developers.com/showthread.php?t=2376667
hit thx if i helped...

[Q] [Plz Help] Bricked xperia c while flashing boot logo zip

Dear devs.
I hope i'll not be disappointed on xda.
My issue is that i've flashed a zip which claims to be a boot logo changer using pure cwm. Soon after that everything stops working. Only red led notification is showing after connecting charger or to pc. I've posted this thread after researching every possible fix but no one z working. My pc also recgnize my xperia c as unidentified device. Plz help and reply asap if you've a fix. Once again i'd like to tell that i've tried every possible fix without any sucess. Thanks in advance.
Omg...i dont understand why do u guys need to change the boot logo? To see something else when powering it on once a week? Im sorry, but its not clever.
Flash stock rom with pc
Sent from my NOTE III SM-N9005 using XDA Premium 4 mobile app
lostangeles said:
Omg...i dont understand why do u guys need to change the boot logo? To see something else when powering it on once a week? Im sorry, but its not clever.
Click to expand...
Click to collapse
I was just looking for some modification, i didn't realized that i'll end up having na dead android
zishu said:
Flash stock rom with pc
Sent from my NOTE III SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I've tried flashing stock tft from Wmshua toll however it only detects my xperia c in odin mode, not in flash mode.
Sony SUS not regognizing my handset. I've tried every possible hardware key combination without any sucess.
I think it's time to get going to a Xperia service centre
Btw thanks for your reply.
abhaykush said:
Dear devs.
I hope i'll not be disappointed on xda.
My issue is that i've flashed a zip which claims to be a boot logo changer using pure cwm. Soon after that everything stops working. Only red led notification is showing after connecting charger or to pc. I've posted this thread after researching every possible fix but no one z working. My pc also recgnize my xperia c as unidentified device. Plz help and reply asap if you've a fix. Once again i'd like to tell that i've tried every possible fix without any sucess. Thanks in advance.
Click to expand...
Click to collapse
According to me you lost your phone and it will not run without a new motherboard, If there is a fix for this issue then let me know.
Since is not a removeable battery try this. When the Sony service asks for pressing the down volume button do this. Keep pressing power+up volume button and when the screen goes totally black press the down button before vibrates. Check your pc if is installing smth new. Do it this a few times untill the drivers installs.
Sent from my C2305 using XDA Free mobile app

My xperia c2305 bricked while flashing recovery from mobile uncle

I rooted my Sony xperia by kingoroot and it was root successfully and then I tried to flashing cwm from mobile uncle. The recovery.IMG was of around 6mb.
It was ask me to reboot and when I clicked to reboot my mobile is no getting ON.
Please help me I used SUS for solving bt it says tht it has stopped contact and I even used Sony companion
Please help me.please give me suitable solution
Sent from my Sony Xperia C2305 using XDA Free mobile app
need same help
same problem any help this day.
Problem solved
casfoxz said:
same problem any help this day.
Click to expand...
Click to collapse
PROBLEM SOLVED with Sony PC Companion
casfoxz said:
PROBLEM SOLVED with Sony PC Companion
Click to expand...
Click to collapse
how please
@casfoxz Can you please tell me how did you do that? My phone is not turning on after flashing recovery. The red light glows when usb plugged in.
My xperia c2305 bricked while flashing recovery from mobile uncle
went through whole process of Sony companion but it is not detecting the device and red light glows when device is connected to pc
plz help
can not switch on my mobile xperia c2305 after recovery update with mobileuncle tool
I rooted my Sony xperia C2305 by kingoroot and it was root successfully and then I tried to flashing cwm from mobile uncle. The recovery.IMG was of around 6mb.
It was ask me to reboot and when I clicked to reboot my mobile is no getting ON.
Please help me.please give me suitable solution
beingrkm said:
I rooted my Sony xperia C2305 by kingoroot and it was root successfully and then I tried to flashing cwm from mobile uncle. The recovery.IMG was of around 6mb.
It was ask me to reboot and when I clicked to reboot my mobile is no getting ON.
Please help me.please give me suitable solution
Click to expand...
Click to collapse
just hold volume down and plug usb in and when green light comes wmshua will detect your device and then flash the stock rom and thats it
You can even use xperia flash tool

wifi icon turns on with a dim ligth but does not work

hello i have a j700h/ds suddenly the wifi was not responding i have since rebooted and wiped my phone it its is still doing the same thing.. can u help me plz ?
kerissa said:
hello i have a j700h/ds suddenly the wifi was not responding i have since rebooted and wiped my phone it its is still doing the same thing.. can u help me plz ?
Click to expand...
Click to collapse
Flash stock firmware via Odin
Sent from my SM-J700H using XDA-Developers mobile app

Categories

Resources