I've decided to make this guide for those of you that have somehow done something to your phone to make it unbootable/unusable.
This is written from my own experience of unbricking my own Pure XL, after I've been screwing around too much (and consequently softbricking it many times in the process).
Hopefully this reduces the amount of posts/threads about you bricking your phone and asking for help, as well as the (not too encouraging) replies that tell you to search other threads.
Sorry if it's a very long/wordy guide to follow. I just want to be as detailed as I can.
Disclaimer:
I cannot take any responsibility for you bricking your phone in the first place or whatever you do during/after following this guide.
The stock images are not mine; They are from other helpful members on this forum that have kindly uploaded the files, and I trust that they are genuine articles. I have not tried anything myself other than the stock recovery for BLU Pure XL. I have credited all of the users and linked their posts instead of just the file download links.
Files Needed:
USBDeview
SP Flash Tool (+ Gionee E8 ROM)
BLU Pure XL boot.img, recovery.img, system.img
Allview Soul X2 Xtreme boot.img, recovery.img, system.img
Instructions:
1. Make a working directory where you will extract and put all of the downloaded files in (e.g. C:\Users\[Your Name]\Phone Unbricking).
2. Download the SP Flash Tool with the Gionee E8 ROM (and extract the contents of the downloaded .zip file).
3. Download the images corresponding to your phone model (if you don't have your own backups).
4. Download USBDeview [CTRL+F for Feedback and click the download link for your respective Windows platform (x64 is for 64-bit systems only)] and extract the contents of the downloaded .zip file.
5. Unplug your phone from your computer.
6. Open USBDeview and uninstall any devices with "MediaTek" or "MT65xx" in their name.
7. Plug in your bootlooping phone into your computer and let it bootloop at least once before unplugging it again (it will be slower than bootlooping while unplugged because it installs/loads the serial VCOM drivers on the computer while plugged in).
8. (Windows 7) Restart your computer and hit F8 a few times before you get to the "Starting Windows" animation. Use the down arrow key to navigate to Disable Driver Signature Enforcement and press ENTER.
9. (Windows 8/8.1/10) Restart your computer while holding down the Left SHIFT Key to invoke the Advanced Restart menu (It takes a while for non-SSD installations). Go to Troubleshoot > Advanced options > Startup Settings > Restart. After it presents you the list of possible startup options, press 7 or F7 to boot Windows with driver signature enforcement disabled.
10. After Windows boots up without driver signature enforcement, navigate to your working directory and open up SP Flash Tool.
11. Make sure the Download-Agent is pointing to the MTK_AllInOne_DA.bin in the same directory as SP Flash Tool's .exe and the Scatter-loading File is pointing to the MT6795_Android_scatter.txt in the "Firmware" folder that is outside of the SP Flash Tool folder (where the stock Gionee E8 files are located).
12. Make sure that it is set to "Download Only" in the drop-down menu, and uncheck all of the checkboxes. [IMPORTANT]
13. Click under the Location column for "boot" and navigate to the stock boot.img that you've downloaded.
14. Repeat Step 13 for stock system.img and either stock or TWRP recovery.img.
15. After loading up your image files, make sure that those (boot, recovery, system) are the only ones with a check in their checkbox.
16. Go back to Step 11 and check through each proceeding step again to double-check that everything is correct.
17. Press Download. If it is successful, you'll be greeted with a pop-up window with a green circle checkmark.
18. You can close that window and SP Flash Tool, unplug your phone and reboot it, if it doesn't automatically reboot itself.
Now your phone should be in working order again!
Credits:
@dexterxx for Allview X2 stock image uploads
@acheron1502 for BLU Pure XL stock image uploads
Maybe it would be better if you request to moderator to move it into General and pin it as everyone could see it? Anyway nice guide!
Hi, i tried this and i couldn't get past the SP flash tool part, i changed the boot and recovery and system but SP tool doesn't do anything to my phone. The only way i can make it do something is when i press the vol + and vol - and power button all at the same time. Then it only shows a red bar and says Download DAB 100% and then doesn't go past that. Can you please help me?
---------- Post added at 08:06 PM ---------- Previous post was at 07:46 PM ----------
@bemolx can you help me with my phone please?
My knowlege about SPFlashTool isn't that good.. I would like to help you but I don't know how to do it at all.
Sent from Nexus 5
bemolx said:
My knowlege about SPFlashTool isn't that good.. I would like to help you but I don't know how to do it at all.
Sent from Nexus 5
Click to expand...
Click to collapse
x.x alright thanks
I try using this SP Tool but I keep getting erorr: TIMEOUT (1042)
What should I do?
I send a picture
To all concerned; I am going to flash my phone using SP Flash ****EDIT TONIGHT EDIT**** and take screen shots and as many notes as I can to flash ROMS via SP FLASH...
keep in mind, I'm no expert either - I learned ALL of what I know about SP Flash from these BLU threads and trial and error, when I bricked my phone, and as such, I may not exactly have the patience required to help with out getting snarky... (If I did it that way so can you)
(sorry bemolx, I kinda threw you under the bus regarding brownfox, you helped me with SP flash months ago, so I figured you knew more, so I recommended he contact you)
But I will edit this post with concrete facts and hopefully everyone bricked will be back up and running soon... (flawed or not LOL)
Ive been trying to "give back" and help especially since I figure when CM goes into beta/release soon, these threads will probably get more crowded with people who may not have any experience dealing with problems (Im hoping to pay it forward, the more people with knowledge, the more help to be had overall)
Peas (and carrots)
Tbird
P.S. GREAT write up short circuit; this will help A LOT of people (including me, sending people here vs explaining to everyone is a lot easier LOL)
brownfox96 said:
Hi, i tried this and i couldn't get past the SP flash tool part, i changed the boot and recovery and system but SP tool doesn't do anything to my phone. The only way i can make it do something is when i press the vol + and vol - and power button all at the same time. Then it only shows a red bar and says Download DAB 100% and then doesn't go past that. Can you please help me?
---------- Post added at 08:06 PM ---------- Previous post was at 07:46 PM ----------
@bemolx can you help me with my phone please?
Click to expand...
Click to collapse
Are you letting your phone boot (loop) after pressing the Download button?
Thank you Short Circuit for this guide!
Quick question to anyone who can answer... I was finally able to get sp flash tool to start the download process without errors. However, I still have the red bar with Download DA 100% and the timer underneath that is at 35 minutes and still going. Does it normally take this long?
Edit: my phone was not in a boot loop but I did remove all MTK usb devices and rebooted my pc with the suggested restart option (windows 10)
Alexis96312 said:
I try using this SP Tool but I keep getting erorr: TIMEOUT (1042)
What should I do?
I send a picture
Click to expand...
Click to collapse
How long does it take for that error to show up? Does/is your phone continuing to boot(loop) during the entire process?
Can you try to flash only one of the images at a time and see how that goes?
moses4969 said:
Thank you Short Circuit for this guide!
Quick question to anyone who can answer... I was finally able to get sp flash tool to start the download process without errors. However, I still have the red bar with Download DA 100% and the timer underneath that is at 35 minutes and still going. Does it normally take this long?
Click to expand...
Click to collapse
Options->connection->USB High speed
change it from full speed
moses4969 said:
Thank you Short Circuit for this guide!
Quick question to anyone who can answer... I was finally able to get sp flash tool to start the download process without errors. However, I still have the red bar with Download DA 100% and the timer underneath that is at 35 minutes and still going. Does it normally take this long?
Edit: my phone was not in a boot loop but I did remove all MTK usb devices and rebooted my pc with the suggested restart option (windows 10)
Click to expand...
Click to collapse
It should take less than 30 seconds for the download to finish.
Can you retry again, but reboot your phone and immediately click "Download" after that, but before you hear the windows sound when a device is plugged into the computer?
tbirdguy said:
Options->connection->USB High speed
change it from full speed
Click to expand...
Click to collapse
That was it! Thank you! Currently flashing.
Sent from my LG-H900 using XDA-Developers mobile app
Short Circuit said:
Are you letting your phone boot (loop) after pressing the Download button?
Click to expand...
Click to collapse
It doesn't loop, I have this weird problem where I turn my phone on and it goes to the first white Blu boot up screen and then it turns black from there. I can't access fastboot or anything like that. Also when I try to use SP tool I get to the Red download bar 100% and then it stops, I've let it sit there for over an hour and then I got timeout error.
Do you think there's hope for me?
brownfox96 said:
It doesn't loop, I have this weird problem where I turn my phone on and it goes to the first white Blu boot up screen and then it turns black from there. I can't access fastboot or anything like that. Also when I try to use SP tool I get to the Red download bar 100% and then it stops, I've let it sit there for over an hour and then I got timeout error.
Do you think there's hope for me?
Click to expand...
Click to collapse
Following @tbirdguy's suggestion. try checking if your download speed is set to Full Speed instead of High Speed. If it is set to Full Speed, go to Options > Option... > Connection and set it to High Speed and try again.
If that doesn't work, try flashing each image separately instead of all at once, to determine if maybe one (or more) images are causing the hang.
Short Circuit said:
Following @tbirdguy's suggestion. try checking if your download speed is set to Full Speed instead of High Speed. If it is set to Full Speed, go to Options > Option... > Connection and set it to High Speed and try again.
If that doesn't work, try flashing each image separately instead of all at once, to determine if maybe one (or more) images are causing the hang.
Click to expand...
Click to collapse
Alright will post here if something changes.
---------- Post added at 02:05 AM ---------- Previous post was at 01:55 AM ----------
Short Circuit said:
Following @tbirdguy's suggestion. try checking if your download speed is set to Full Speed instead of High Speed. If it is set to Full Speed, go to Options > Option... > Connection and set it to High Speed and try again.
If that doesn't work, try flashing each image separately instead of all at once, to determine if maybe one (or more) images are causing the hang.
Click to expand...
Click to collapse
So i finally got it to go to the yellow bar after the red bar but then i got another error. I had to change it to full speed in SP tool.
http://i1381.photobucket.com/albums/ah205/brownfox96/2016_05_04_19_55_39_1024x676_zpsrig1183f.png
brownfox96 said:
Alright will post here if something changes.
---------- Post added at 02:05 AM ---------- Previous post was at 01:55 AM ----------
So i finally got it to go to the yellow bar after the red bar but then i got another error. I had to change it to full speed in SP tool.
http://i1381.photobucket.com/albums/ah205/brownfox96/2016_05_04_19_55_39_1024x676_zpsrig1183f.png
Click to expand...
Click to collapse
Are you flashing the correct system image? I can't tell what system image you're trying to flash because of the really long path that gets cut off.
I believe that error comes up if you're flashing an image that is larger than what the scatter file specifies (larger than the specified partition size), you'll get that error.
Short Circuit said:
Are you flashing the correct system image? I can't tell what system image you're trying to flash because of the really long path that gets cut off.
I believe that error comes up if you're flashing an image that is larger than what the scatter file specifies (larger than the specified partition size), you'll get that error.
Click to expand...
Click to collapse
I got all the images to flash i just had to hold the power button for the whole time, but my phone is still bricked, and it won't get past the white Blu Screen D;
GREATTTT NEWS, after i flashed the Blu recovery,system, and boot i tried flashing the whole allview scatter file, and it worked, my phone isnt bricked anymore, but i was wondering is there a way for me to completly reset my phone now, like back to Blu factory?
brownfox96 said:
I got all the images to flash i just had to hold the power button for the whole time, but my phone is still bricked, and it won't get past the white Blu Screen D;
Click to expand...
Click to collapse
Is it just hanging there or is it bootlooping? Can you flash TWRP, use it to clear the cache/dalvik cache and try booting again?
Related
Yesterday afternoon I attempted the Bionic Path Saver update with 901 and Liberty 2.0. Due to issues with flashing the Webtop image and some flaws in the script I wound up with a dead phone. After hacking up a charger and over 12 hours of experimentation I was able to get the phone and and was able to update it. I do not want anyone to have to go through what I went through so I am posting this. I do not take credit for the files, I only came up with the combination. All download links lead to the creators. Let me know how this works out and of course always create backups before performing this.
**Things you will need**
A FULLY charged battery
My SafeBionicPathSaver_v2.rar - http://www.filesharesite.com/files/201201/1327968223SafeBionicPathSaver_v2.rar.html
RSDLite 5.5 - In this package
Motorola Drivers - In this package
flashme.zip - In this package
Liberty 2.0 (.901 OTA Compatible) - http://rootzwiki.com/topic/13096-901-radio-working-with-custom-rom/
bionicbootstrap.apk - http://droidmodderx.com/bionic/bootstrap-recovery-for-the-bionic/
**Instructions**
1.) Install RSDLite 5.5 and Motorola Drivers (32-bit or 64-bit accordingly).
2.) Extract flashme.zip to any location on your computer.
3.) Extract SafeBionicPathSaver_v2.rar (ME) files to any location on your computer.
4.) Copy bionicbootstrap.apk and copy the Liberty 2.0 (.901 OTA Compatible) ZIP to the root directory of your SD card.
5.) Connect phone to computer, set phone to USB Debugging Mode, and set it to Charge Only. You will also need to allow "Unknown sources" in your application settings.
6.) Go to the directory from Step 3 and run SBPSscript.bat. Let it run and wait for Phase 1 to complete.
7.) Phone should now be at the bootloader. Open up RSDLite and browse to the XML in the directory from Step 2. Flash this and the phone should reboot, it will take a while.
8.) The phone should now be at the Android setup screen. *The phone has been reflashed and reset, you now need to follow STEP 5 again to continue*. You may now contune following the prompts in the SBPSscript.bat script. Watch for any errors as directed. The phone should end up booted into stock recovery.
9.) At the recovery menu you are going to install updates manually. First do update893.zip, then do update901.zip. Make sure there were no errors then reboot the phone.
10.) You are now at version .901 and should still be rooted. To test root you can try and update Superuser by going to Superuser's menu and updating the binary. If it fails with a permission issue, you do not have root and have to start over.
***IF YOU WOULD LIKE TO REMAIN ON THE STOCK ROOTED .901 ROM YOU CAN STOP HERE. THE REST OF THE STEPS ARE FOR GETTING LIBERTY3 2.0 INSTALLED.***
11.) Now install bionicbootstrap.apk, open the application, and press the "Bootstrap Recovery" button (grant any SU access). This will install the Clockwork Recovery ROM and would fail if you were not still rooted.
12.) Now click the "Reboot Recovery" button. You will now be in the Clockwork Recovery Mod.
13.) At this menu you will need to wipe data, cache, dalvik cache, and format /system.
14.) Now you will select "install zip from sdcard" using the volume and power buttons and choose the Liberty ZIP you uploaded in Step 6.
15.) After this is done you can reboot the phone and you will have a Liberty3 2.0 / .901 Radio Bionic!
-Mark DePalma | MNetwork
I will be trying this later tonight. I'm hoping it goes well and I'll be sure to let you know. Thanks for taking the time to make the write-up. If it works properly, it's exactly what I've been looking for.
utcu said:
I will be trying this later tonight. I'm hoping it goes well and I'll be sure to let you know. Thanks for taking the time to make the write-up. If it works properly, it's exactly what I've been looking for.
Click to expand...
Click to collapse
You're welcome, a user just notified me of a typo "fixme = flashme" and I have updated that in my ZIP and in the post. The same user also told me that the flashme.zip file isn't available for download at the moment. I would host it myself, but I know that within 30 minutes my pipe would be saturated. Hopefully this link comes back up soon, if not I will find a way to host it somewhere.
utcu said:
I will be trying this later tonight. I'm hoping it goes well and I'll be sure to let you know. Thanks for taking the time to make the write-up. If it works properly, it's exactly what I've been looking for.
Click to expand...
Click to collapse
Worked like a charm. Greatly appreciated. Nothing like being on Liberty with 901.
utcu said:
Worked like a charm. Greatly appreciated. Nothing like being on Liberty with 901.
Click to expand...
Click to collapse
Great! Good to hear. I have updated the post with a 2nd link to download the flashme.zip file since that went down last night. Very happy XDA is finally back online.
can this be used to go back to 5.5.839 from .901?
waffleb051 said:
can this be used to go back to 5.5.839 from .901?
Click to expand...
Click to collapse
I believe you can, but you MAY have to flash a .901 CDT image after you flash back to .839. I came back from a failed root attempt on .901, but I was also playing with different CDTs. If you try it out you can definately get it working, may or may not have to flash that .901 CDT.
I haven't able to have any success with this. I tried it twice but it keeps hanging on the Motorola screen. This is after I flash flashme (step 9) and when it goes to reboot. I've waited both time for 15-20 minutes but nothing. Is there something I'm missing? I have RSDLite 5.5 and Drivers 5.4
Stealth36 said:
I haven't able to have any success with this. I tried it twice but it keeps hanging on the Motorola screen. This is after I flash flashme (step 9) and when it goes to reboot. I've waited both time for 15-20 minutes but nothing. Is there something I'm missing? I have RSDLite 5.5 and Drivers 5.4
Click to expand...
Click to collapse
Well since you have rebooted you now have to manually get it into the fastboot mode. Turn the phone off, hold both volume buttons down, then hold the power button down for a second or two and the phone should enter fast loader mode. At this point you can connect it to the computer and RSDLite will see the phone and you can resume. Let me know if this works for you...
so I'm taking this doesn't work... files aren't even there
all i need is the last one... BPS_Safe_Scripts
plus there is a safe strap now... whats' going on.
Slie said:
all i need is the last one... BPS_Safe_Scripts
plus there is a safe strap now... whats' going on.
Click to expand...
Click to collapse
My web server runs on an old P2V'd box in my ESXi cluster and I've been meaning to port all my web sites over to a new web server VM, but haven't had the chance. I have to restart this VM every once in a while... I just rebooted it and the web site is back up. You can download this file now.
mnetwork said:
Well since you have rebooted you now have to manually get it into the fastboot mode. Turn the phone off, hold both volume buttons down, then hold the power button down for a second or two and the phone should enter fast loader mode. At this point you can connect it to the computer and RSDLite will see the phone and you can resume. Let me know if this works for you...
Click to expand...
Click to collapse
I went to try it again and it worked this time. It ended up on the Android welcome screen. Thanks for the script!
Stealth36 said:
I went to try it again and it worked this time. It ended up on the Android welcome screen. Thanks for the script!
Click to expand...
Click to collapse
Good to hear!
I have one more question. Right before I installed the Liberty(.901).zip my system version said 901 but after installing Liberty it now says 886. So is that telling the truth?
Stealth36 said:
I have one more question. Right before I installed the Liberty(.901).zip my system version said 901 but after installing Liberty it now says 886. So is that telling the truth?
Click to expand...
Click to collapse
I am in the same boat. I believe since the ROM is built on .886 that is what it is going to report. The radio, however, has already been updated and Liberty doesn't contain a radio and therefor would not roll it back. The version of Liberty used in here is only patched with libraries to handle the .901 radio. Since the upgrade I have not had the contant data drops and 3g/4g switching that I had before. The only time the data really drops now is when I'm going through a tunnel or something like that.
Unfortunately it seems that all of the servers for these files have been stopped or are now unavailable. Anyone got the files or a new location for the files? This situation has gotten out of control with the sites.
treefrog20012003 said:
Unfortunately it seems that all of the servers for these files have been stopped or are now unavailable. Anyone got the files or a new location for the files? This situation has gotten out of control with the sites.
Click to expand...
Click to collapse
The governement is getting out of control with the piracy protection... I can make one complete package that would be much smaller than all of them combined, but if I host it I know I will be out of bandwidth in 30 min (it would still be fairly large).
treefrog20012003 said:
Unfortunately it seems that all of the servers for these files have been stopped or are now unavailable. Anyone got the files or a new location for the files? This situation has gotten out of control with the sites.
Click to expand...
Click to collapse
Which files did you find were missing? I was able to download two of the larger ones with no problem.
The flash me zip was not available and one other file was blocked on two of the sites and on a third it called for four hours to download. I want to get off the 901 system and downgrade so I can run the ics ROM. I tried once and was bricked for 24 hours until I found the bin swap method to get back to 893 from the motorola files using rsdlite.
Sent from my DROID BIONIC using XDA App
Same Problem -- Need Help
mnetwork said:
Well since you have rebooted you now have to manually get it into the fastboot mode. Turn the phone off, hold both volume buttons down, then hold the power button down for a second or two and the phone should enter fast loader mode. At this point you can connect it to the computer and RSDLite will see the phone and you can resume. Let me know if this works for you...
Click to expand...
Click to collapse
I am running into the same problem. I have re-ran the RSDLite script, it finishes but the phone never goes to the Android Welcome Screen. It stays on the Motorola Dual Core start-up screen
Ok I finally got this tablet rooted using some chinese oneclick root tool worked great do to it was the only kit that was able to root it and i installed supersu apk to replace to chinese version worked and i went to update supersu and hit the twrp (not knowing what it was at the tim stupid right i know lol) and now it is stuck in the twrp/cwm bootloop and i cant get into recovery mode when i try it says updating img blah blah and restarts back into the bootloop. It is running 4.1.1 JB and has a micro sd card slot.There is a pic in the atachment because i dont know how to upload it to this post but it is just a pic no "extras" are included no viruses maleware ect just a pic
parkourgamer said:
Ok I finally got this tablet rooted using some chinese oneclick root tool worked great do to it was the only kit that was able to root it and i installed supersu apk to replace to chinese version worked and i went to update supersu and hit the twrp (not knowing what it was at the tim stupid right i know lol) and now it is stuck in the twrp/cwm bootloop and i cant get into recovery mode when i try it says updating img blah blah and restarts back into the bootloop. It is running 4.1.1 JB and has a micro sd card slot.There is a pic in the atachment because i dont know how to upload it to this post but it is just a pic no "extras" are included no viruses maleware ect just a pic
Click to expand...
Click to collapse
Super old I know but my kids tablet is doing this now. Did you ever find a fix?
KilluminatiStyle said:
Super old I know but my kids tablet is doing this now. Did you ever find a fix?
Click to expand...
Click to collapse
Pro tip: Don't bumb old threads like this. You might not even have similar problems. Instead create a new thread regdaring your issue.
Now, post your tablet info HERE:
Root staus?
Can you boot in recovery? If yes what recovery do you have?
Tablet model
Android version
What happened
What have tried to fix it
janekmuric said:
Pro tip: Don't bumb old threads like this. You might not even have similar problems. Instead create a new thread regdaring your issue.
Now, post your tablet info HERE:
Root staus?
Can you boot in recovery? If yes what recovery do you have?
Tablet model
Android version
What happened
What have tried to fix it
Click to expand...
Click to collapse
Root Status = ROOTED
I cannot boot into recovery mode (but when i try i get this, look in pic 2&3)
Tablet Type = HKC (NOT HTC) p776a
ANDROID Version I think (98% shure) is 4.1.1 beta JB
What happened = A few years ago 2013 i think a got this tablet then i learned about rooting, roms, and such so i spent the next year or two trying to root the tablet. I finally got it rooted with a chinese root program and all was well (i don't remember the name of the program) then there was a update for su and i pressed the twrp/cwm mode on accident (I think I was talking to someone at the time) and now it does what is shown in the image 1 it is on some boot loop. When I try to access the hboot menu it does what is shown in these images 2&3. Also my tablet has a MicroSD card slot and the battery can not be taken out. the regular bootloop picture is image file 1 that is what it looks like when it does its continuous bootloop and P.S. the tablet turns off and on automatically during the bootloop. To try and fix it i have let it do its bootloop for hours on end turn it on and off tried looking for a compatible rom (to no avail) and let the battery completely die that is about it.
parkourgamer said:
Root Status = ROOTED
I cannot boot into recovery mode (but when i try i get this, look in pic 2&3)
Tablet Type = HKC (NOT HTC) p776a
ANDROID Version I think (98% shure) is 4.1.1 beta JB
What happened = A few years ago 2013 i think a got this tablet then i learned about rooting, roms, and such so i spent the next year or two trying to root the tablet. I finally got it rooted with a chinese root program and all was well (i don't remember the name of the program) then there was a update for su and i pressed the twrp/cwm mode on accident (I think I was talking to someone at the time) and now it does what is shown in the image 1 it is on some boot loop. When I try to access the hboot menu it does what is shown in these images 2&3. Also my tablet has a MicroSD card slot and the battery can not be taken out. the regular bootloop picture is image file 1 that is what it looks like when it does its continuous bootloop and P.S. the tablet turns off and on automatically during the bootloop. To try and fix it i have let it do its bootloop for hours on end turn it on and off tried looking for a compatible rom (to no avail) and let the battery completely die that is about it.
Click to expand...
Click to collapse
Okay. Just a few more questions.
Does your tablet boot into recovery (picture 1) even if you try to boot normally? (fastboot maybe)
Can you boot into anything else other than recovery? (try different button combinations)
Does ADB recognise your tablet when it's in recovery mode? (if you don't know about this, just post your computer OS and if you have ADB/Fastboot drivers installed on your PC)
If the anwser the the first question is no:
Does ADB recognise the device while it's in the bootloop.
janekmuric said:
Okay. Just a few more questions.
Does your tablet boot into recovery (picture 1) even if you try to boot normally? (fastboot maybe)
Can you boot into anything else other than recovery? (try different button combinations)
Does ADB recognise your tablet when it's in recovery mode? (if you don't know about this, just post your computer OS and if you have ADB/Fastboot drivers installed on your PC)
If the anwser the the first question is no:
Does ADB recognise the device while it's in the bootloop.
Click to expand...
Click to collapse
sorry, i forgot to clarify the hboot. it pops up the "words" or whatever then automatically reboots there is no way to select options or keep the device on so i cant use fastboot unless there is a way i dont know of. P.S. the tablet restarts automatically so it is on for like 25 maybe 30 seconds then shuts off then turns back on and repeats till the battery is dead. My thought originally to fix it was to get a rom put it on the sdcard and see if that works but the manufacture does not supply the rom for my model only the p771a. and the only physical buttons are the home, power, the pinhole reset button, the volume and such buttons are virtual on the screen when it is fully on. And picture 1 i dont fully know what that screen symbol is the hboot one is similar but not that but yes it does but to picture 1 nomadder what i do even if i try to get to hboot menu. Sorry if this is a "little" scattered having explaining it. If it would help i can make a video and rar it and upload it here.
parkourgamer said:
sorry, i forgot to clarify the hboot. it pops up the "words" or whatever then automatically reboots there is no way to select options or keep the device on so i cant use fastboot unless there is a way i dont know of. P.S. the tablet restarts automatically so it is on for like 25 maybe 30 seconds then shuts off then turns back on and repeats till the battery is dead. My thought originally to fix it was to get a rom put it on the sdcard and see if that works but the manufacture does not supply the rom for my model only the p771a. and the only physical buttons are the home, power, the pinhole reset button, the volume and such buttons are virtual on the screen when it is fully on. And picture 1 i dont fully know what that screen symbol is the hboot one is similar but not that but yes it does but to picture 1 nomadder what i do even if i try to get to hboot menu. Sorry if this is a "little" scattered having explaining it. If it would help i can make a video and rar it and upload it here.
Click to expand...
Click to collapse
here is the video
parkourgamer said:
sorry, i forgot to clarify the hboot. it pops up the "words" or whatever then automatically reboots there is no way to select options or keep the device on so i cant use fastboot unless there is a way i dont know of. P.S. the tablet restarts automatically so it is on for like 25 maybe 30 seconds then shuts off then turns back on and repeats till the battery is dead. My thought originally to fix it was to get a rom put it on the sdcard and see if that works but the manufacture does not supply the rom for my model only the p771a. and the only physical buttons are the home, power, the pinhole reset button, the volume and such buttons are virtual on the screen when it is fully on. And picture 1 i dont fully know what that screen symbol is the hboot one is similar but not that but yes it does but to picture 1 nomadder what i do even if i try to get to hboot menu. Sorry if this is a "little" scattered having explaining it. If it would help i can make a video and rar it and upload it here.
Click to expand...
Click to collapse
1. Download fixcache.bat.zip on your computer. Extract cachefix.bat from the file.
2. Run it. It should say just "Waiting for device..."
3. Now reset your tablet with the reset button and QUICKLY plug it into the computer and wait a few minutes.
Now try to get to that text in picture 1 and tell me what happends.
Also post the text you see on the computer from the file I sent you.
Tell me if
janekmuric said:
1. Download fixcache.bat.zip on your computer. Extract cachefix.bat from the file.
2. Run it. It should say just "Waiting for device..."
3. Now reset your tablet with the reset button and QUICKLY plug it into the computer and wait a few minutes.
Now try to get to that text in picture 1 and tell me what happends.
Also post the text you see on the computer from the file I sent you.
Tell me if
Click to expand...
Click to collapse
this is what happens to the .bat fikle when i open it
parkourgamer said:
this is what happens to the .bat fikle when i open it
Click to expand...
Click to collapse
also would there be any way to pop the hood and flip a switch to reset it like on a pc tower?
parkourgamer said:
also would there be any way to pop the hood and flip a switch to reset it like on a pc tower?
Click to expand...
Click to collapse
Umm, you said there is a reset button on the tablet so pressing that would probably reset it.
The error you are getting is because adb is not installed on your PC. Use this simple adb installer to instal adb. When installing just press yes to everything. MAKE SURE THE PHONE IS PLUGGED IN THE COMPUTER WHILE INSTALLING AND THAT IT'S ON!
Now run the file again.
If you want you can add me on Skype: janekmuric
---------- Post added at 13:51 ---------- Previous post was at 13:26 ----------
If you want to know what is happening:
You are in what's called a recovery bootloop. It's when you can't get out of the recovery. What is happening in this case is that Superuser app tried to install it's binaries via recovery. Because some people don't know how to install binaries manually, the app puts a file on the cache partition so the recovery automaticly installs the zip upon booting. Now, this would be good so you don't mess up your device, but the zip file it's trying to install is faulty so it just breaks the device.
My attept at fixing this is to delete the /cache/recovery folder so it doesn't just install the file, and instead boots into a working recovery.
janekmuric said:
Umm, you said there is a reset button on the tablet so pressing that would probably reset it.
The error you are getting is because adb is not installed on your PC. Use this simple adb installer to instal adb. When installing just press yes to everything. MAKE SURE THE PHONE IS PLUGGED IN THE COMPUTER WHILE INSTALLING AND THAT IT'S ON!
Now run the file again.
If you want you can add me on Skype: janekmuric
---------- Post added at 13:51 ---------- Previous post was at 13:26 ----------
If you want to know what is happening:
You are in what's called a recovery bootloop. It's when you can't get out of the recovery. What is happening in this case is that Superuser app tried to install it's binaries via recovery. Because some people don't know how to install binaries manually, the app puts a file on the cache partition so the recovery automaticly installs the zip upon booting. Now, this would be good so you don't mess up your device, but the zip file it's trying to install is faulty so it just breaks the device.
My attept at fixing this is to delete the /cache/recovery folder so it doesn't just install the file, and instead boots into a working recovery.
Click to expand...
Click to collapse
That would be great but i cant keep my tablet on for more than like 30 seconds before it auto shuts off and it automatically tries to go into recovery when i add power to the device it wont just boot to the OS
parkourgamer said:
That would be great but i cant keep my tablet on for more than like 30 seconds before it auto shuts off and it automatically tries to go into recovery when i add power to the device it wont just boot to the OS
Click to expand...
Click to collapse
30 seconds is more than enough. Especally with an automated script like the one I sent you.
The first thing we have to do to fix your tablet is to establish a working ADB connection. Use the ADB installer i sent you. And look up on how to install Google USB driver for ADB.
janekmuric said:
30 seconds is more than enough. Especally with an automated script like the one I sent you.
The first thing we have to do to fix your tablet is to establish a working ADB connection. Use the ADB installer i sent you. And look up on how to install Google USB driver for ADB.
Click to expand...
Click to collapse
ok will try
Here is the rundown. I have the d 850 LG g3. Was planning on unrooting phone from towel root and rerooting it using towelroot once I found the mod I wanted. I have the latest version of twrp loaded as well. On my way home from work yesterday I was riding my motorcycle and listening to music, all the sudden the music stops so I pull over to see what happened and look to see that my phone has somehow opened twrp. I get home and try to reboot phone and it loads right back into twrp. I did a backup. Restarted phone to same results. I factory reset phone thinking that would work. NOPE. Straight back into twrp so I plug phone into computer to see what's on it. It appears all my games music LG backup etc is still there's why can't I get out of twrp. Could I have accidentally wiped everything while in my pocket? Can I fix this problem or do i now have a $500 paperweight? Please please folks out there in xda land help me out. I've got experience in rooting with my htc m7 so am familiar with this stuff. Any help would be greatly appreciated. Thanks for your time.
dcm1200 said:
Here is the rundown. I have the d 850 LG g3. Was planning on unrooting phone from towel root and rerooting it using towelroot once I found the mod I wanted. I have the latest version of twrp loaded as well. On my way home from work yesterday I was riding my motorcycle and listening to music, all the sudden the music stops so I pull over to see what happened and look to see that my phone has somehow opened twrp. I get home and try to reboot phone and it loads right back into twrp. I did a backup. Restarted phone to same results. I factory reset phone thinking that would work. NOPE. Straight back into twrp so I plug phone into computer to see what's on it. It appears all my games music LG backup etc is still there's why can't I get out of twrp. Could I have accidentally wiped everything while in my pocket? Can I fix this problem or do i now have a $500 paperweight? Please please folks out there in xda land help me out. I've got experience in rooting with my htc m7 so am familiar with this stuff. Any help would be greatly appreciated. Thanks for your time.
Click to expand...
Click to collapse
Make backup and try repair your system partition with lg flash tools and tot or if you have twrp. Try flash any rom stock bumped
Try this..
dcm1200 said:
Here is the rundown. I have the d 850 LG g3. Was planning on unrooting phone from towel root and rerooting it using towelroot once I found the mod I wanted. I have the latest version of twrp loaded as well. On my way home from work yesterday I was riding my motorcycle and listening to music, all the sudden the music stops so I pull over to see what happened and look to see that my phone has somehow opened twrp. I get home and try to reboot phone and it loads right back into twrp. I did a backup. Restarted phone to same results. I factory reset phone thinking that would work. NOPE. Straight back into twrp so I plug phone into computer to see what's on it. It appears all my games music LG backup etc is still there's why can't I get out of twrp. Could I have accidentally wiped everything while in my pocket? Can I fix this problem or do i now have a $500 paperweight? Please please folks out there in xda land help me out. I've got experience in rooting with my htc m7 so am familiar with this stuff. Any help would be greatly appreciated. Thanks for your time.
Click to expand...
Click to collapse
Somehow your rom partition/system seems to be corrupted. If you want to try and save your data, Please copy the downloaded version of your current rom and dirty flash (flash without wipe) and try to get back into the system. If you do not have your rom in your internal memory, try adb sideload or try to copy it to your external SD card and install from there.
You can also try to copy your stuff over to the external SD card using the file manager in TWRP and then wipe and install your rom.
If none of these wor, you still can flash factory image by process defined in the this thread: http://forum.xda-developers.com/att-lg-g3/general/unroot-return-to-factory-stock-att-lg-g3-t2820827
I believe you can still rescue your phone. Please let us know how it went.
I tried flashing a ROM with gaps and rebooted and it still senT me back into TWRP.
Maybe his phone tried to download and install the OTA? Try this also if the above doesn't work. http://forum.xda-developers.com/lg-g3/development/fix-stuck-custom-recovery-trying-ota-t2907508
harihacker said:
Somehow your rom partition/system seems to be corrupted. If you want to try and save your data, Please copy the downloaded version of your current rom and dirty flash (flash without wipe) and try to get back into the system. If you do not have your rom in your internal memory, try adb sideload or try to copy it to your external SD card and install from there.
You can also try to copy your stuff over to the external SD card using the file manager in TWRP and then wipe and install your rom.
If none of these wor, you still can flash factory image by process defined in the this thread: http://forum.xda-developers.com/att-lg-g3/general/unroot-return-to-factory-stock-att-lg-g3-t2820827
I believe you can still rescue your phone. Please let us know how it went.
Click to expand...
Click to collapse
Will do. Going home in a bit to try it out. Will keep u posted and thanks to everyone who has given advice. Ill be happy to get it back to stock and then starting over from scratch with a good custom from and kernel. Quick question, I tried flashing the custom illusion rom with gapps. Is that rom a bmp.img?
No.. A Zip file.
dcm1200 said:
Will do. Going home in a bit to try it out. Will keep u posted and thanks to everyone who has given advice. Ill be happy to get it back to stock and then starting over from scratch with a good custom from and kernel. Quick question, I tried flashing the custom illusion rom with gapps. Is that rom a bmp.img?
Click to expand...
Click to collapse
The rom is normally a zip file.
If you already tried to flash a rom (other than your current one) I suggest you try the "back to stock" thing that was referred in my last post. If you have all the drivers in place and do the process correctly (preferably from a Windows 7 laptop), Your phone will be burst back to life in no time.. Good luck..!!
harihacker said:
The rom is normally a zip file.
If you already tried to flash a rom (other than your current one) I suggest you try the "back to stock" thing that was referred in my last post. If you have all the drivers in place and do the process correctly (preferably from a Windows 7 laptop), Your phone will be burst back to life in no time.. Good luck..!!
Click to expand...
Click to collapse
Following the steps and just to part where I press volume up and plug into USB port and it said download for a second then jumped to firmware update do not unplug until process is complete. Its been a couple of minutes and in still at zero %
Good..
dcm1200 said:
Following the steps and just to part where I press volume up and plug into USB port and it said download for a second then jumped to firmware update do not unplug until process is complete. Its been a couple of minutes and in still at zero %
Click to expand...
Click to collapse
That is exactly what you want. You are now in download mode. So please proceed to next step (i believe the next step is on the laptop).
But the firmware update hasn't even gotten to 1% yet and I don't know how to get back to download mode. I don't know if unplugging device and trying again will mess it up even more. Device manager didn't pop up on computer either
dcm1200 said:
But the firmware update hasn't even gotten to 1% yet and I don't know how to get back to download mode. I don't know if unplugging device and trying again will mess it up even more. Device manager didn't pop up on computer either
Click to expand...
Click to collapse
Device manager wont "pop up".. you need to pull it from control pannel. Once you confirmed/changed the port to 41, i believe you can pull the usb, wait for 5 sec and put in back in. Follow exactly as instructed in the thread and you should be fine.
---------- Post added at 04:19 PM ---------- Previous post was at 04:16 PM ----------
Also firmware update starts after the "usb pull" and re-plug in.
harihacker said:
Device manager wont "pop up".. you need to pull it from control pannel. Once you confirmed/changed the port to 41, i believe you can pull the usb, wait for 5 sec and put in back in. Follow exactly as instructed in the thread and you should be fine.
---------- Post added at 04:19 PM ---------- Previous post was at 04:16 PM ----------
Also firmware update starts after the "usb pull" and re-plug in.
Click to expand...
Click to collapse
I haven't gotten a chance to pull it up. IT goes to download mode and then right into firmware update. I'm looking on control panel for my phone so I can go into port but its not showing up in control panel
dcm1200 said:
I haven't gotten a chance to pull it up. IT goes to download mode and then right into firmware update. I'm looking on control panel for my phone so I can go into port but its not showing up in control panel
Click to expand...
Click to collapse
1) The "firmware update" page is the download mode.
2) Control Panel -> Device Manager -> Ports -> Select LG one -> Port Settings -> Advanced -> look for "Com Port Number" on left hand side.
---------- Post added at 04:32 PM ---------- Previous post was at 04:29 PM ----------
If your device does not show in the Ports section, that means that your drivers are not installed correctly. Did you install the one given in the thread?
---------- Post added at 04:39 PM ---------- Previous post was at 04:32 PM ----------
Try these drivers if you cant find the right one: http://www.koushikdutta.com/post/universal-adb-driver
Yes drivers showed in port. Followed instructions according to LG flashtool and in getting a message saying that lgusb/ parallel lock key is not detected
?
dcm1200 said:
Yes drivers showed in port. Followed instructions according to LG flashtool and in getting a message saying that lgusb/ parallel lock key is not detected
Click to expand...
Click to collapse
At what stage of the process are you getting this error? Please refer to the step number in the "back to stock" thread.
Lg flash tool is saying authentication failed
Re-try.
dcm1200 said:
Lg flash tool is saying authentication failed
Click to expand...
Click to collapse
Again, at what stage did you get the error? Which step?
Did you install the driver i quoted above? If you did in between the process, please pull the battery and try from the beginning if the flash process did not start.
harihacker said:
At what stage of the process are you getting this error? Please refer to the step number in the "back to stock" thread.
Click to expand...
Click to collapse
Step 12 go to LG flash tool and run as administrator.
DLL
dcm1200 said:
Step 12 go to LG flash tool and run as administrator.
Click to expand...
Click to collapse
Did you replace the DLL file in the folder as instructed? Did you give the computer's correct admin password? Are you logged in as an admin in the laptop?
harihacker said:
Did you replace the DLL file in the folder as instructed? Did you give the computer's correct admin password? Are you logged in as an admin in the laptop?
Click to expand...
Click to collapse
I got in
I'm going to try and encapsulate everything that's going on into this initial thread but I'm sure I'll miss something.
Basically, I undertook to root my phone last night. I followed all the steps in the root thread, and I thought it worked, but then when I went to the root checker to see if I was successful. The test couldn't get a result the first time, and then failed the second time. I've known my phone to be a little temperamental when it comes to stuff like that, so I shrugged it off. Then, everything started running with so much lag that my only option was a reboot. It came back up just fine, but then, apps wouldn't open anymore. Since a reboot fixes everything, I rebooted AGAIN... except no I didn't, because I couldn't move past the white splash screen.
After some time hacking around with TWRP, system restoring my phone and the like, I finally managed to actually load the OS again. I think the phone was rooted at that time, but I don't know for sure, because this was the drawback: I couldn't install ANYTHING. My idea is that the system was rebooted into read-only mode. I tried everything I could think of to revert the system to rewriteable again, but nothing ever panned out. There was just one thing that stood out to me: "Your phone worked properly when it wasn't rooted." So, I got the brilliant idea to use SuperSU to unroot my phone. Stupid, stupid move, because now my phone can't boot past the white splash screen again. As a last ditch effort, I decided that it was time to flash the stock system to the phone. Except I probably did it wrong.
Code:
fastboot flash recovery recovery.img
Code:
fastboot flash recovery system.img
Code:
fastboot flash recovery boot.img
And where I stand now is that my phone will not boot past the white splash screen, and I can no longer access either TWRP or Fastboot.
Is my phone fooked, or can anyone save this?
#1 You can't flash system image via fastboot - it's semi-locked.
#2 You can't use 'flash recovery' command for boot and system images.
#3 For restoring your phone use SP Flash Tool - there's a thread in the General section called 'How to unbrick'.
Try it and let us know.
Cheers
Yeah, I realized afterward that if I were trying to flash the image of the system, I should not have used the "flash recovery" command because I disabled access to the other recoveries, lol. I have tried to use the SP Flash Tool in the past few days, but I could never get any download progress. I think my computer isn't making the VCOM drivers accessible to be able to flash those things to my phone. Do you have any advice on that end? Because I have seen that thread and tried those steps but I'm just not successful.
You should also read all replies to this thread - there are people who solved their problems with SPFT in their own way, that's how I've revived my phone from hardbrick.
Make sure you're phone is disconnected when you start the flash. AFTER you hit the download button in SPFT... then connect your phone...
Fantastic advice from both of you. I'm ready to revive my phone!
Okay, I think I'm making good progress on recovering my phone. I have managed to get back the stock recovery onto my phone, which I then used to install TWRP. But I'm not out of the woods yet. I used fastboot to flash the boot image onto my phone also, but when it came to the system image, I'm having a lot of trouble. The only ROM I can find for the Blu Pure XL is a 7z file. Now, I know how those work, I have 7zip and I extracted it for the system image. When fastboot was available to me, I couldn't push the system image to the phone. Now that I have TWRP and I have no more access to fastboot, I've tried to load the system file onto my phone through my SD card in four different ways:
As a .img file
As a .7z file
As a .zip file that I created by zipping up the image file
As a .zip file that was .7z, but I changed the extension
None of those methods worked. The Blu development thread doesn't point me to a zipped ROM file. One person there said that they had a backup of their files and provided a link, but those images seem to have been removed.
I'm so close, I can see this phone working again in the near future, I just need your help to get me there. Please! :'(
Edit: Also, keep in mind, I'm dumb. I don't think I really did anything super wrong, but I may be missing something ultra obvious. So if you could just keep your answers dumb for me, it would help even more.
I would stop trying to use all of the methods you are using I believe you are slightly confused by them at this time..
At this point what you have done with the random image flashing is get damaged partitions..
Get SPFT. Turn off you phone completely.
Download the full Scatter file for you phone. (put it aside).
Download a file called ALL MTK driver install. ( or something to that effect). Search for it on Google. You will find it. Run it and then reboot your PC completely.. (if you have windows 8 or higher look online on how to install unsigned drivers) --THIS IS THR BIGGEST PROBLEM PEOPLE HAVE--
Extract your full downloaded scatter image to a directory.. (you can download the Gionee E8 image if you want) it is what I am running on my Blu..
Run SPFD read the thread that they pointed out to you. Find the scatter and point SPFD.. Once it is loaded on the program UNCHECK the PRELOADER check box.. (if not you can cause problems) ..
click download and after 10 seconds or so plug in (you completely powered off) phone into the computer..
.Then wait..... and wait... It will tell you it's progress..
Keep trying it, it WILL work.. and ALWAYS unchecked preloaded when flashing with spdf...
I did follow all the steps in the original guide, and I followed the steps that you gave me too, down to using the advanced device manager to remove any MediaTek drivers from the computer and restarting the computer with disabling the driver signature verification, but when I click download, wait, and plug my phone into the computer, just nothing happens. The computer says it's an unrecognized device, and the download never progresses.
I see also that you said keep trying, but every time I try the SPFT, it never sends anything to my phone. And I don't even know how to tell if I'm missing some important step.
OK this happens sometimes. plug the phone in with device manager open.. plug the phone in when it is off..
When it says unrecognized device double click on it really fast( it will disappear fast, try it a couple of times if you don't get it the first time) then hit update driver.. point it to the MTK drivers folder (unzip the MTK drivers folder). It will pick the proper driver. on some computers it loads up so fast it has no time to recognize the driver..
After you load the drivers power off your phone again and follow the instruction I gave.. After you do this once it will load the drivers right after this..
When I double click on the unrecognized device button, it just brings up a notification that my device wasn't recognized because it malfunctioned. I don't have an option to install any drivers.
My problem is finally solved. After starting up SPFT and clicking download, I held Vol - and Power and then connected it, and that pushed the download forward. I got to the Blu animation screen, and it stayed up FOREVER, but then the next time I looked over, it was on the initial setup screen. Good as new.
Thank you guys for all your help. This forum really is an amazing place.
Hi Guys,
I have a problem with my one plus one 64 GB. I flash the cyanogenmod 14.1. It works great until last week that suddenly it shut down and after that only black screen. I can´t go even to the fastboot mode. I search and found some simmilar problems
https://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
But this issue dosen´t work for me. I think it´s because the recovery tool works only with CM11 and I have the CM 14.1. I try to contact the support from One plus the use the same tool as I use (to my astonishment ). They told me that the bootloader is curropted and I have to send my phone.
I have to backup my Documents and Photos. So how can I do it? I think If I have the chance to put the opo in fastboot mode I can recover my data.
For any help I am thankful.
If u can got to fastboot just reflash COS13.1.2
If u dont know how to do it, there is a thread in the general section about it
hamillton007 said:
Hi Guys,
I have a problem with my one plus one 64 GB. I flash the cyanogenmod 14.1. It works great until last week that suddenly it shut down and after that only black screen. I can´t go even to the fastboot mode. I search and found some simmilar problems
https://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
But this issue dosen´t work for me. I think it´s because the recovery tool works only with CM11 and I have the CM 14.1. I try to contact the support from One plus the use the same tool as I use (to my astonishment ). They told me that the bootloader is curropted and I have to send my phone.
I have to backup my Documents and Photos. So how can I do it? I think If I have the chance to put the opo in fastboot mode I can recover my data.
For any help I am thankful.
Click to expand...
Click to collapse
If you dont have fastboot then you can flash files via 9008 modem loader and fix your phone in 1 hour and back up running via COLOR OS hard brick tool. Just google or I am happy to help you via TEAM VIEWER remote access.
Aki07 said:
If you dont have fastboot then you can flash files via 9008 modem loader and fix your phone in 1 hour and back up running via COLOR OS hard brick tool. Just google or I am happy to help you via TEAM VIEWER remote access.
Click to expand...
Click to collapse
Hi Aki,
Ist would be great via Team Viewer. But I'm comming from Germany. Please give me a Feedback. One more questiin. After flashig would i lost all my Data?
hamillton007 said:
Hi Aki,
Ist would be great via Team Viewer. But I'm comming from Germany. Please give me a Feedback. One more questiin. After flashing would i lost all my Data?
Click to expand...
Click to collapse
Unfortunately yes. You will loose everything in phone. If the phone can get into fastboot mode by Vol up + power button then we can back up. Otherwise sorry you will loose everything.
I am from New Zealand. So we have a huge time difference. We will arrange a time work together. Happy to help you.
Aki07 said:
Unfortunately yes. You will loose everything in phone. If the phone can get into fastboot mode by Vol up + power button then we can back up. Otherwise sorry you will loose everything.
I am from New Zealand. So we have a huge time difference. We will arrange a time work together. Happy to help you.
Click to expand...
Click to collapse
OK thanks alot. By the way what should I Download as programs anderen Software?
hamillton007 said:
OK thanks alot. By the way what should I Download as programs anderen Software?
Click to expand...
Click to collapse
I got all the tools with me. I will transfer everything from my computer to yours. Just need good internet speed thats all.
Before we proceed I want you to do something.
1. Please connect your phone to computer.
2. Open device manager
3. Press vol up + power button.
4. Is anything detected ?????
Aki07 said:
I got all the tools with me. I will transfer everything from my computer to yours. Just need good internet speed thats all.
Before we proceed I want you to do something.
1. Please connect your phone to computer.
2. Open device manager
3. Press vol up + power button.
4. Is anything detected ?????
Click to expand...
Click to collapse
HI,
I can see QUalcomm HS-USB QLoader 9008
hamillton007 said:
HI,
I can see QUalcomm HS-USB QLoader 9008
Click to expand...
Click to collapse
Awesome that's all I need. I can fix your phone. Now let's fix a time and date.
Aki07 said:
Awesome that's all I need. I can fix your phone. Now let's fix a time and date.
Click to expand...
Click to collapse
Should WE dobit nie?
hamillton007 said:
Should WE dobit nie?
Click to expand...
Click to collapse
Do it now?
hamillton007 said:
Should WE dobit nie?
Click to expand...
Click to collapse
Well its already night herem 11.10pm. Few friends are here with me now. May be in an hour or two ?
Aki07 said:
Well its already night herem 11.10pm. Few friends are here with me now. May be in an hour or two ?
Click to expand...
Click to collapse
OK noch problem
hamillton007 said:
OK noch problem
Click to expand...
Click to collapse
https://mega.co.nz/#!BkpwyYSB!rkYSkFI28vFGuhtsIli-vyDdsb4ZZp1-MX1cLLtaiRo
can you please download these file...
If you can you try yourself or wait for me.
1. Download and extract the file using winrar
2. Connect your phone and press vol up + power button.
3. Run msmxxxxx.exe file. ( run as administrator) something like that.
4. Press enum then press start... Wait for it finish it will show green color.
Remove the phone and just reboot. Tada your phone will be working again. Now you root your phone via fast boot and install twrp install any ROM you want. Don't forget to upgrade your firmware 1st before flashing custom ROM.
---------- Post added at 04:28 PM ---------- Previous post was at 04:20 PM ----------
hamillton007 said:
OK noch problem
Click to expand...
Click to collapse
https://mega.co.nz/#!BkpwyYSB!rkYSkFI28vFGuhtsIli-vyDdsb4ZZp1-MX1cLLtaiRo
can you please download these file...
If you can you try yourself or wait for me.
1. Download and extract the file using winrar
2. Connect your phone and press vol up + power button.
3. Run msmxxxxx.exe file. ( run as administrator) something like that.
4. Press enum then press start... Wait for it finish it will show green color.
Remove the phone and just reboot. Tada your phone will be working again. Now you root your phone via fast boot and install twrp install any ROM you want. Don't forget to upgrade your firmware 1st before flashing custom ROM.
Aki07 said:
https://mega.co.nz/#!BkpwyYSB!rkYSkFI28vFGuhtsIli-vyDdsb4ZZp1-MX1cLLtaiRo
can you please download these file...
If you can you try yourself or wait for me.
1. Download and extract the file using winrar
2. Connect your phone and press vol up + power button.
3. Run msmxxxxx.exe file. ( run as administrator) something like that.
4. Press enum then press start... Wait for it finish it will show green color.
Remove the phone and just reboot. Tada your phone will be working again. Now you root your phone via fast boot and install twrp install any ROM you want. Don't forget to upgrade your firmware 1st before flashing custom ROM.
---------- Post added at 04:28 PM ---------- Previous post was at 04:20 PM ----------
https://mega.co.nz/#!BkpwyYSB!rkYSkFI28vFGuhtsIli-vyDdsb4ZZp1-MX1cLLtaiRo
can you please download these file...
If you can you try yourself or wait for me.
1. Download and extract the file using winrar
2. Connect your phone and press vol up + power button.
3. Run msmxxxxx.exe file. ( run as administrator) something like that.
4. Press enum then press start... Wait for it finish it will show green color.
Remove the phone and just reboot. Tada your phone will be working again. Now you root your phone via fast boot and install twrp install any ROM you want. Don't forget to upgrade your firmware 1st before flashing custom ROM.
Click to expand...
Click to collapse
OK. The Link is Not Update. I can not find the Software. But i think i know which Software you mean. Is that the MSM... Downloadtool? If yes it does Not Work for me. It try to Download the 8974_msimage.mbn in loop.
hamillton007 said:
OK. The Link is Not Update. I can not find the Software. But i think i know which Software you mean. Is that the MSM... Downloadtool? If yes it does Not Work for me. It try to Download the 8974_msimage.mbn in loop.
Click to expand...
Click to collapse
Yes that tooI, i know what happened. When it goes loop just press the vol up + and power button. It happens coz 9008 is only needed for flashing msimage.mbn then it will switch 9006. It is not switching to 9006 that's why it goes on loop. Just vol+ & pwr button. It will start flashing other files. It happened to me once.
Aki07 said:
Yes that tooI, i know what happened. When it goes loop just press the vol up + and power button. It happens coz 9008 is only needed for flashing msimage.mbn then it will switch 9006. It is not switching to 9006 that's why it goes on loop. Just vol+ & pwr button. It will start flashing other files. It happened to me once.
Click to expand...
Click to collapse
Hi,
it still not working. Looping on the 8974_msimage_mbn.(See image).
I´m confused that my Windows show the opo as com 4 but the msn_downloadtool shows is as com 1.
hamillton007 said:
Hi,
it still not working. Looping on the 8974_msimage_mbn.(See image).
I´m confused that my Windows show the opo as com 4 but the msn_downloadtool shows is as com 1.
Click to expand...
Click to collapse
There is something called miflash tool. Can you check that? I am little busy for next 3 days but will try to reply to your comments.
HI,
I donload the MiFlash and try to flash the phone according the instructions http://www.androidbrick.com/ultimate-qualcomm-snapdragon-unbrick-guide-snapdragons-are-unbrickable-qhsusb_dload_qpst_qfil/. But I have errors. The log file is:
DownloadFlashProgrammer (369): An attempt was made to load a file with an incorrect format.(0x8007000b)
DownloadFlashProgrammerAndMiniKernel (753): An attempt was made to load a file with an incorrect format.(0x8007000b)
CSoftwareDownload DownloadBySettings (1879): An attempt was made to load a file with an incorrect format.(0x8007000b)
CEmergencyFlasher DoWork (525): An attempt was made to load a file with an incorrect format.(0x8007000b)
CDeviceReport::HasError (67): An attempt was made to load a file with an incorrect format.(0x8007000b)
CDeviceReport::GetStatus (124): An attempt was made to load a file with an incorrect format.(0x8007000b)
CDeviceReport::HasError (67): An attempt was made to load a file with an incorrect format.(0x8007000b)
I can´t find any information regarding these errors no Manuals.
hamillton007 said:
HI,
I donload the MiFlash and try to flash the phone according the instructions http://www.androidbrick.com/ultimate-qualcomm-snapdragon-unbrick-guide-snapdragons-are-unbrickable-qhsusb_dload_qpst_qfil/. But I have errors. The log file is:
DownloadFlashProgrammer (369): An attempt was made to load a file with an incorrect format.(0x8007000b)
DownloadFlashProgrammerAndMiniKernel (753): An attempt was made to load a file with an incorrect format.(0x8007000b)
CSoftwareDownload DownloadBySettings (1879): An attempt was made to load a file with an incorrect format.(0x8007000b)
CEmergencyFlasher DoWork (525): An attempt was made to load a file with an incorrect format.(0x8007000b)
CDeviceReport::HasError (67): An attempt was made to load a file with an incorrect format.(0x8007000b)
CDeviceReport::GetStatus (124): An attempt was made to load a file with an incorrect format.(0x8007000b)
CDeviceReport::HasError (67): An attempt was made to load a file with an incorrect format.(0x8007000b)
I can´t find any information regarding these errors no Manuals.
Click to expand...
Click to collapse
Can you please wait till tmrw evening? We will have a remote session using team viewer at 10pm New Zealand time ??