[Completed] Require assistance please. Zte Avid Plus Z828 FRP 'd - XDA Assist

So, I got a Zte Avid Plus z828 (t mobile no sim card) that has frp so basically i cant get pass the google account verification screen. I have found a way to get into the settings and enable developer mode without no otg method or apk methods. I simply used the text to speech method where i open the source for that and then open up google and search settings allowing me to access the settings and enable developer mode via build version.
Now here's the problem I can click backup and reset but when i actually click RESET PHONE nothing happens. I can keep on clicking it and nothing will happen it's a button thats just there. I want to enable USB debugging with hopes of using adb shell and wiping the phone that way but i can't even access the developer settings. I click on the developer settings and nothing happens its the same situation with the RESET PHONE option. Why is this occurring? Anyone have any advice as to how i can get around this? I've tried downloading apks that would open the developer settings but it opens for less then a second then instantly closes. I'm new here so i'm not even sure if this is where i was supposed to even post this, sorry if it wasn't the correct place to post this. if you need me to elaborate anymore just ask, i'll gladly do it.

Hello and thank you for using XDA Assist,
please create a thread here:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards
Trafalgar Square
XDA Assist

Related

[Completed] How can i reset my tablet from my pc without adb authorazation. Please Help!!!!

I rooted my tablet and was installing a different launcher to look like ios and when I rebooted my tablet it says unfortunately google.abunch of other words has stopped, I would click ok and it would pop up again. and so I cant click anything so I tried to put my tablet into recovery mode and I got a picture of and android on its back with an error symbol and I cant enter recovery mode. so is there any way I can do it from my pc. Any help would be greatly appreciated.
XDA Visitor said:
I rooted my tablet and was installing a different launcher to look like ios and when I rebooted my tablet it says unfortunately google.abunch of other words has stopped, I would click ok and it would pop up again. and so I cant click anything so I tried to put my tablet into recovery mode and I got a picture of and android on its back with an error symbol and I cant enter recovery mode. so is there any way I can do it from my pc. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Hello there! Welcome to XDA!
First register an XDA account (so you can ask in the proper forum)
Then it would be great to know; which tablet are you talking about?
After registering, you may want to search for your tablet on the search on top ("Type to find your device")
if there is no thread with your tablet...
then, you may ask for help here: (see below)
Android Q&A, Help & Troubleshooting
Good Luck!

[Completed] on screen keyboard has failed and there is a password on the phone

hey everyone,
I have a Casio G'zone Commando 4g lte phone from Verizon using a stock rom and it was pushed an update from Verizon. when this happened the on screen keyboard is no longer coming up at the password screen to enter the password. I don't want to do a factory reset because there are photos I do not want to lose on it. usb debugging is not enabled so I cannot use adb that I know of and the only recovery buttons I have found for this phone will wipe it. I also tried an on the go adapter with a usb keyboard but that didn't work either. any help or ideas would be appreciated.
thank you
XDA Visitor said:
hey everyone,
I have a Casio G'zone Commando 4g lte phone from Verizon using a stock rom and it was pushed an update from Verizon. when this happened the on screen keyboard is no longer coming up at the password screen to enter the password. I don't want to do a factory reset because there are photos I do not want to lose on it. usb debugging is not enabled so I cannot use adb that I know of and the only recovery buttons I have found for this phone will wipe it. I also tried an on the go adapter with a usb keyboard but that didn't work either. any help or ideas would be appreciated.
thank you
Click to expand...
Click to collapse
Hello, and thank you for using XDA Assist!
There are a couple different levels of factory reset. One that is intentionally invoked (eg. via recovery) seems to delete app data (including settings) only, as in leaves media files intact. I ran into this when I reset my old Infuse. All the old pictures were still there.
Another level is invoked by entering the wrong password too many times or when your device is lost, for example. That factory reset formats the userdata partition.
I don't think there is any other option but to factory reset at this point; the only choice is the type of factory reset to go with. If you can get into recovery mode, you should be able to do the former.
But before coming to that, I would get one last opinion on the matter before wiping away:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting > [Ask Any Question][Newbie Friendly]
Please note, you will need an XDA account before posting there.
Hope this helps, and good luck!

[Completed] Black screen on doogee f3pro with only notification screen

Not too sure what happened - but phone died of low battery and when I restarted it it boots through but doesnt load apps etc. The notification bar works and I have even received a phone call. but if you click on notifications etc nothing happens.
When I try to boot into recovery mode I get the text prompts but when I select recovery it comes up with android error icon and some chinese symbols that I assume just say error or something.
The phone is a stock standard Doogee F3pro running factory software.
unsure of what I can do
I cant access it via mac or PC as the phone is in mass usb storage mode. PC recognises phone but wont open - just asks to insert media into G drive etc. And using file transfer for Mac it doesnt recognise phone.
USB debug wasnt enabled as I wasnt messing with phone.
help.... anyone?
Hello and thank you for using XDA Assist,
please create an XDA Account and create a thread here:
Android Q&A, Help & Troubleshooting
The experts in our Question and Answer section should be able to help you.
Kind regards and good luck
Trafalgar Square
XDA Assist

[Completed] Need help flashing ROM on phone with malware without USB connection

Hello,
I got a dreadful malware on my phone that takes it over almost completely, a hand cursor appears on the top right of the screen and it downloads apps left and right even if I disable download from unknown sources.
I have done a factory reset and that thing is still there, I can't seem to flash a ROM with all the tools I found online, flashify does not see the zip file, ROM manager does not work either. I have tried to follow various tutorials but always arrive at a standstill, the recovery apps just don't seem to see anything but folders.
My phone is a Jiayu F2, on the official site they recommend to flash with SP flashtools but I can't use that since my USB port is broken.
Are there any other options? I have superuser enabled, can do very little with my phone except in safe mode. Airplane mode tames the malware a little but not completely.
Malwarebytes does not see anything wrong with my phone anymore ( there used to be a riskware), yet it's still completely unusable.
Can someone help me please? I'm getting desperate and can't buy a new phone before 2 weeks
Thanks
Hello and thank you for using XDA Assist,
please ask in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist

[Completed] Motorola Moto G LTE X1032 process has stopped "spam"

Hello everybody,
today a Motorola Moto G LTE Smartphone was given to me with the request to fix an system issue.
The problem: The phone is spamming notifications about process termination. This spam makes the user unable to do anything.
If you agree and klick at the button "ok" when you have read the message about process termination the next message shows up. Sometimes it takes longer since the message shows up and sometimes not. Between this messages you can easily navigate through the whole android system scroll menus etc.
I've read some threads about clearing the google play store cache and data and disconnecting your google account from the smartphone but this does not fix the problem.
I tried to factory reset the phone. It does not work if you try it through the android settings because you can not confirm that you want to erase all your data to factory reset the device.
Next thing i tried is to go into the AP Fastboot Flash Mode and do a System recovery but the system says Boot up failed if i try to access it.
So my next thought was to install a cyanogenmod to fix the problem but i can not enable usb debugging and my pc does not recognize the device.
The OS is standard vanilla android without anything special on it.
Would be so awesome if somebody could help me fix this
Hello and thank you for using XDA Assist,
please create an account and ask your question here:
http://forum.xda-developers.com/moto-g-lte/help
Kind regards
Trafalgar Square
XDA Assist

Categories

Resources