Question About Samsung Galaxy S6 Live Demo Unit - Galaxy S6 Q&A, Help & Troubleshooting

Hello,
I have a Samsung Galaxy S6 live demo unit, which i want to make it full working phone.
I'm replacing the motherboard to the original S6 board with IMEI, the charging board and those 2 antenna cables (red & blue).
Now.. will it work? And the demo unit include the GSM antenna? Or i need to replace the back housing panel with the flex cable on it? (Maybe the GSM antenna is there?). Can someone please show me how the GSM antenna of the Galaxy S6 looks like? Because i couldnt find it on Google.
Thank you, and i'm sorry for my english.

Related

[Q] P5100 cracked digitizer - Disassembly?

Hi guys, I recently cracked the digitizer of my P5100 by letting it fall on the ground. I decided to buy a cheap digitizer from china over ebay.
For the P7500, there are tons of information and tutorial videos on disassembly and digitizer relacement. But for the P5100 - nothing at all. I can't find any screws or switches. The top and bottom of the case can easily be disconnected from the device, but the sides don't move at all.
Anyone have any ideas?
that's bad, samsung service center is your last hope.... I think they will charge you about $50 - $100 USD
hi
i dont know if could help u or not
but this is the service manual for p5100
mediafire.com/?p1tqwcf77h8c78e
bye
@quicck
hey, thanks a lot. unfortunately, in the key chapter, the pictures show the P7500. i can't safely losen the case at the position where the speakers are (no speakers on P7500).

[Q] Galaxy S2 Mainboard replacement

Good afternoon,
I have a broken Galaxy S2 which mainboard needs to be replaced. It's hard to find one, but I found a SGH-i777 on ebay. I wonder if it's compatible with my phone. On the sticker it says "Model: GT-I9100GSMH". Will it work?!
If you guys can also point me to a reliable place to buy this mainboard I will be very grateful!
Component C565 is toasted and need to be replaced to check for other problems. From another thread, C565 is a Ceramic Capacitor.
http://forum.xda-developers.com/showpost.php?p=27330168&postcount=33
Thanks in advance!
Anyone? At least to point the right mainboard to search, thanks guys!

[Q] replacing motherboard . different models

Hello people I have a big problem that I want to fix.
I just bought a galaxy s3 sch-i535dd which does not take SIM card and I have a friend who has a different model galaxy s3 and I want to know if I can just replace the motherboard or the LCD screen I just want to make sure.
sense they have the same design figured that the motherboard will fit .
can somebody help me on that?

Do you think is possible convert a N910c in dual Sim version N9100

Hello everybody...
Anyone knows if is possible convert a normal N910c in a dual Sim version of Galaxy Note 4 N9100? I just thinking, if is possible of course, change the the normal flex part that hold one Sim card for a new one with a double Sim card holder and change the middle housing too, for the same as N9100 uses to fit the new parts. On eBay I find this two parts, anyone have some idea if this is gonna work? Is necessary some firmware implements? The Note 4 is a awesome smartphone and I noob here just thinking if this go work with it.
Thanks people. You're the best.
The parts on sale in eBay. I can't post the links to this part here, noob haha, but if you wanna know who are this part, search on eBay for "OEM Double SIM Card SD Card Holder Flex Repair For Samsung Galaxy Note 4/N9108W" and "For Samsung Galaxy Note 4 N9100 N910F N910X Battery back Full Housing Cover Door".
That's all.
Mmm not really... at least not with these parts. There's a chance to convert it but I'm sure that you would need to buy the main dual-sim pcb and the back housing itself. The double sim flex will not work in the N910C mainboard. Cheers!
Do you think I need a new mainboard to this work? I was thinking that Samsung use a universal mainboard and add new components to her to build the different models...
Well first of all both N9108W/N91000 are snapdragon variants while our N910C is an exynos one. If you're able to snap the dual sim board in the PCB, you will still need to use a dual sim-enabled firmware, and the only available dual-sim firmwares are for snapdragon processors so it will not work in your device. That's why you should buy a N91000 Snapdragon pcb and swap your Exynos one. Cheers!
Ok, I understand it, not worth the effort, is more easy change between models and I don't need to do this... But it was curious if this would work. Thanks!!!
There is actually a dual sim adapter for that. It's available for most phones, I used it for my Note 2 but the flex cable was too thick so it kinda bulged when I forced the adapter under the battery cover.
mha93 said:
There is actually a dual sim adapter for that. It's available for most phones, I used it for my Note 2 but the flex cable was too thick so it kinda bulged when I forced the adapter under the battery cover.
Click to expand...
Click to collapse
I know those adapters, but you need switch with them to receive the signal of one or another operator, right? Or both sim works the same time?
JCMax1 said:
I know those adapters, but you need switch with them to receive the signal of one or another operator, right? Or both sim works the same time?
Click to expand...
Click to collapse
I THINK they work together. I can't confirm it as those adapters works on stock roms and I was using custom, so there was some issues trying to detect the sims.
JCMax1 said:
Hello everybody...
Anyone knows if is possible convert a normal N910c in a dual Sim version of Galaxy Note 4 N9100? I just thinking, if is possible of course, change the the normal flex part that hold one Sim card for a new one with a double Sim card holder and change the middle housing too, for the same as N9100 uses to fit the new parts. On eBay I find this two parts, anyone have some idea if this is gonna work? Is necessary some firmware implements? The Note 4 is a awesome smartphone and I noob here just thinking if this go work with it.
Thanks people. You're the best.
The parts on sale in eBay. I can't post the links to this part here, noob haha, but if you wanna know who are this part, search on eBay for "OEM Double SIM Card SD Card Holder Flex Repair For Samsung Galaxy Note 4/N9108W" and "For Samsung Galaxy Note 4 N9100 N910F N910X Battery back Full Housing Cover Door".
That's all.
Click to expand...
Click to collapse
simply not possible
Nope, unless you are a software developer and can alter the stock firmware for your N910C to support the use of dual SIMs.
Hey guys,
i will come back to the Topic from the opner.
i have the Galaxy Note 4 SM-910F with a Snapdragon 805 CPU, in this case i think that can be work.
But i thik the firmware / baseband must be changed to the firmware from the N9100 / N9108W.
Perhaps also the kernel?

Transplanting motherboard

Hello can I take a v500n motherboard and put it in a non korean non international v50? I understand the rear pogo pins wont be available unless I put the korean v500n rear cover on the body of the non korean phone.
I was told by a highly LG Phone educated person that the v500n motherboard will not work in a Verizon LG v50 body. I assume this is due to the different antennas/hardware located off the main motherboard. If anyone can shed light on this to confirm for me I would love that.
Questions though.
Can a korean rear cover fit onto a non korean body?
Will the Korean motherboard work with the non korean screen?
Where are the antennas located, if I transplant only the korean motherboard will I also need the korean cellular antenna or is it located on the board itself?
Thank you for any help with this.
I appreciate everything.

Categories

Resources