Hi guys, I recently cracked the digitizer of my P5100 by letting it fall on the ground. I decided to buy a cheap digitizer from china over ebay.
For the P7500, there are tons of information and tutorial videos on disassembly and digitizer relacement. But for the P5100 - nothing at all. I can't find any screws or switches. The top and bottom of the case can easily be disconnected from the device, but the sides don't move at all.
Anyone have any ideas?
that's bad, samsung service center is your last hope.... I think they will charge you about $50 - $100 USD
hi
i dont know if could help u or not
but this is the service manual for p5100
mediafire.com/?p1tqwcf77h8c78e
bye
@quicck
hey, thanks a lot. unfortunately, in the key chapter, the pictures show the P7500. i can't safely losen the case at the position where the speakers are (no speakers on P7500).
Related
Does anyone know a place to get spare parts for the XDA II (not likely) or does someone have a broken XDA II they are selling parts off of?
I somehow managed to crack part of the casing of my I-mate around my power switch. Well tonight it finally broke off and I am devistated. (ok well.. pretty upset at least)
If anyone has a spare... I am looking for a replacement black piece (antenna cover) of the casing. Would pay generously for one.
I'm looking for a spare casing...
Last friday I dropped my MDA2 and the case now has a small dent near the Bluetooth LED and a small scratch on the opposite corner and I want to replace it as soon as possible!
Anybody knows where to get replacements?
Is the case metal or plastic?
Thanks in advance...
Rayan
I may have XDA 2 Spares!
I am currently battling to get my XDA 2 repaired under warranty by o2 in the UK..
If i lose: I will have an xda 2 worth of parts (minus the mainboard) less than six months old immaculate apart from the board and its connector.
so case is scratch free, screens perfect etc...
Failing that if anyone has an busted xda 2 with a working mainboard please mail me...
parts
Matt,
How did you get on with O2, I'm looking to get all the parts except the main board as I've got one of them.
Cheers
Cmcmill01
parts
Matt,
How did you get on with O2, I'm looking to get all the parts except the main board as I've got one of them.
Cheers
Cmcmill01
I lost! No repair, no warranty, 6 weeks and no service!
I have come up with another solution for my broken xda connector.
The device still functions but i cant connect to my laptop/docking station, so im going to buy a bluetooth card and spare batt, keep the spare batt on charge using the docking station and use bluetooth to sync with laptop...
spare batt = £15
bluetooth card = £20
my total = 35
O2's = £185 a mear £20 cheaper than a brand new XDAII !!!
AND THEY WERE GOING TO CHARGE ME £17.50 to send the bloody thing back without having lifted a finger to repair the device! Until i went ballistic in the store in front of a dozen customers, and i do mean ballistic a bit digruntled wont work you have to loose it in front of as many customers as possible to force them to back down and return your property.
I will never buy new from O2 again, and as soon as the contract hits 12 months they are history bollox to them. The warranty is not worth the paper its written on, the shop service is less than i would expect from cowboys r us, save yourselves time and pain buy second hand theres still no warranty but its cheaper by far..
p.s. for those who are bound to ask, No mention of any charges including postage are/were made at the point of handing my phone over or at any time until 17.50 was demanded for its return.
@ Matt Ryan
my XDA 2 connector snapped from the pbc
ill tell you how to fix.....
get hold of an ipaq 38xx or 39xx, SPV 1, or spv2 or xda 1 or xda2 board and desolder the connector off and put a new one on
i got hold of a spv1 for less then £30 and ive stripped the board and sending it to my mate who deals in small eloctronics reapir hes charging me £15 to hot air rework the connector off the spv and put it onto the XDA2 pbc
meaning all repaired and stronger then before
gaz
did you not sign an a-novo repair sheet. It states clearly on the reverse side of this that is your device is beyond economical repair, or if you refuse a quote, you will be charge £17.50.
nope i didnt sign a-novo contract/ job sheet
I took the phone to an o2 shop and signed THIER repair sheet, nothing on reverse nothing refering to charge for returning device if not repaired
Nothing anywhere, nada...
Repair XDAII's screen, connector and casing in the UK
Hi guys,
I can repair the following faults/damage of XDAII here in the UK.
1. replace broken connector.
2. repalce broken LCD screen.
and please email me for any damages/faults/repair that you require for your unit, and I'll qoute you accrodingly.
all parts are brand new!!! not spare ones from broken unit.
please email me for a 'HAPPY' qoutation today on [email protected]
cheers
Hello-I need help finding a place that in the USA can repair my xdaII. I just dropped it on my marble floor -- OOPS! I thought you may have heard of a place for me to send it?? I believe I've broken the lcd & glass...it functions fine but has major cracks/shatter marks thoughout the screen...Let me know if you can help & thank you
For anybody interested, I have an xda 2, the screen is bleeding, the imei is blocked in UK owing to insurance claim but will work in rest of the world. I want £50 gbp. If nobody takes it I will post on ebay.
S O L D
hello christin
contact me at +65-98787543, i buy your phone
regards
Kaiser
www.kaiserelectronics.net
Hey guys.. I droped my touch pro about a week ago onto concrete and need a few replacement parts.. I haven't dropped a phone for years when I have had much cheaper phones and now I get a decent one this happens!
The phone actually still works 100% but is in a horrible state.. the digitzer has smashed but somehow still works, theres a key missing from the keyboard and the case is a bit munted, I will attach photos if I can.
I called 3 places in australia;
#1 HTC direct who said send it to us for a quote and we may be able to fix it ($38.50 for the quote and $11 to courier it back)
#2 A htc approved repair centre who said $170 for the screen and $110 for the keyboard.. I got into an argument with their receptionist saying the lcd is fine I just need the digitzer but she was adament they are one and the same.
#3 The vendor where I got the phone, who said their repair centre could fix it but I would have to send it to there for a quote ($35 for quote and $15 postage back)
So from what I can see I'm looking at around $300 from one place or pay $50 to another place for just the quote and they may not come back any cheaper..
I am confident enough to pull the phone apart and repair it myself.. don't have much to lose.. (I actually replaced the phone with a touch HD the next day.. sort of like drown your sorrows by replacing it with something better) As the touch pro wouldn't turn on and I figured it was completely dead..
On closer inspection a few days later I found the battery terminals had bent and wern't contacting, I bent them back and it turns on and works now)
I just want to replace the broken parts because it's a horrible mess!
I found a store on ebay selling the digitzer for $60 which is around what I would expect to pay, waiting to hear back from them if they can source a keyboard and the internal case parts, I thought someone on here might know where I can source these parts outside of Australia?
pics are below.. hope they work (warning: not for those with a weak stomach! )
Here you go
http://mobile.brando.com.hk/prod_list.php?dept_id=039&cat_id=1149
It would be easier to just buy the lcd with digitizer already installed
http://mobile.brando.com.hk/prod_detail.php?prod_id=03799&dept_id=039&cat_id=1149
US$88.00
Here's the complete housing with keyboard.
http://mobile.brando.com.hk/prod_detail.php?prod_id=03811&dept_id=039&cat_id=1149
US$85.00
Thanks, you're a lifesaver! the only trouble is that keyboard is different to mine I think the keys would probably all line up and work but you would have to know which one was which (the symbols and punctuation ones would be hard) if I can't get the right one I'll probably order from there but if anyone knows where I can get the correct keyboard that'd be even better
Happy to help
Let me see if I can find you the touch pro keypad.
Here you go
http://www.order-bulk.com/product_info.php?products_id=86904&language=en&cPath=357
If you were here I would hug you, I have no idea how you found that so fast, maybe I was looking in the wrong places (scouring ebay and google australia) but I've been looking for hours! can now order all the parts I need to turn it into a brand new phone
Out of interest, when you say it's easier to get the screen with the digitzer already installed, is there a reason for that? I see digitizers advertised everywhere seperately, and thought they were an entirely seperate part to the LCD, or are they connected via a bunch of fragile edge connectors? I'm happy to pay the extra $44 to get the lcd / digitzer combo if theres a risk of screwing up seperating them but if it's not a hugely risks job then I wouldn't mind saving the cash..
Thanks so much d3th metal
Hey mate, i got a big f'ing scratch down my brand new fuze. Would love to know how this goes, if you get the digitizer or full screen. As im going to try and polish it out, but i dont hold much hope. So i think this is going to be the only way.
Don't know if this is a case of too little too late information, but i tried to replace the digitizer only on my touch pro because i had some major scratches on the screen. I've taken a part a number of phones in the past and I work with electronics for a living, and for the life of me I have no idea how anyone could separate the LCD from the touchscreen. I ended up cracking the LCD glass and breaking one of the itty-bitty flat cable connectors. My recommendation to anyone contemplating this is to just pay the additional cash to get the LCD and digitizer together. I tried to save $40 and now my phone is in a zillion parts in a plastic bin waiting for the new screen to get here
sanche13 said:
Don't know if this is a case of too little too late information, but i tried to replace the digitizer only on my touch pro because i had some major scratches on the screen. I've taken a part a number of phones in the past and I work with electronics for a living, and for the life of me I have no idea how anyone could separate the LCD from the touchscreen. I ended up cracking the LCD glass and breaking one of the itty-bitty flat cable connectors. My recommendation to anyone contemplating this is to just pay the additional cash to get the LCD and digitizer together. I tried to save $40 and now my phone is in a zillion parts in a plastic bin waiting for the new screen to get here
Click to expand...
Click to collapse
Yeh the way to do it is to use a razor blade. It will definitely take some time though and a lot of patients.
This would be awesome for a sticky. It would provide anyone who needs help with getting parts for their touchpro/raphael/fuze if they decide they need it.
D3TH METAL said:
Here you go
http://www.order-bulk.com/product_info.php?products_id=86904&language=en&cPath=357
Click to expand...
Click to collapse
Would be I able to replace this keyboard with the one on my Fuze, I know i would have to figure out how to map all the buttons right, but would it fit correctly
Please pm me, Thanks
HELP
Did any1 buy anything from the mobile.brando.hk? If so pls tell me if I should get the replacement touch screen from them. My touch pro is full of anoying rainbow scratches
Antenna
Does anyone know where I can find a replacement internal bluetooth antenna wire?
I have a boot up Touch pro from HTC not AT&T, but just not go to the operation mode! Screen is prefect condition no starch, will come with screen protector. The outside case is prefect condition, Anyone want it? I will like to sell it for 120 dollar including OEM box, everything ALSO come with the SEIDIO case with clip. Please PM me for any question. Thanks
Recently, i dropped my note10.1 and the digitizer is cracked. :crying:
I want to replace it asap but i can't find much about digitizer for samsung galaxy note 10.1. And i heard that it'll compactable with the digitizer for galaxy tab 10.1 P7500.
So my question is" Can I replace my digitizer with that of galaxy tab 10.1?" Someone confirm me pls. And yea, ASAP.
guGG29 said:
Recently, i dropped my note10.1 and the digitizer is cracked. :crying:
I want to replace it asap but i can't find much about digitizer for samsung galaxy note 10.1. And i heard that it'll compactable with the digitizer for galaxy tab 10.1 P7500.
So my question is" Can I replace my digitizer with that of galaxy tab 10.1?" Someone confirm me pls. And yea, ASAP.
Click to expand...
Click to collapse
No you can't different model of digitizer
Sent from my X10S using xda app-developers app
Can you post pictures?
I reckon it'll be expensive to replace too, the note 1 screen and digitizer cost $220 before being replaced.... And that was only about 1/2 the size of the 10.1....
ultramag69 said:
I reckon it'll be expensive to replace too, the note 1 screen and digitizer cost $220 before being replaced.... And that was only about 1/2 the size of the 10.1....
Click to expand...
Click to collapse
But only digitizer is cracked, not the LCD which is expensive. I found that they're around 60$.
But the digitizer for tab 10.1 is much cheaper, that's why i want to replace with it.
horse-racing dityder
asdfuogh said:
Can you post pictures?
Click to expand...
Click to collapse
no, i haven't disassambled it yet.
The trouble is, with most screens, that the digitiser is glued to the screen and is a major mongrel to get off without damaging the LCD... The note 10.1 has a wacom digitiser in it so I'd assume that would put the price up...
I remember there was someone in the note forum that said he had replaced the digitiser but it was not for the lay person to do. Most people who tried tended to break the LCD and then had to fork over the $220 anyway. Plus the postage, most coming from China, could be 2 - 3 weeks long....
ultramag69 said:
The trouble is, with most screens, that the digitiser is glued to the screen and is a major mongrel to get off without damaging the LCD... The note 10.1 has a wacom digitiser in it so I'd assume that would put the price up...
I remember there was someone in the note forum that said he had replaced the digitiser but it was not for the lay person to do. Most people who tried tended to break the LCD and then had to fork over the $220 anyway. Plus the postage, most coming from China, could be 2 - 3 weeks long....
Click to expand...
Click to collapse
Ifix it said that the screen is not glued tp the digitizer and it is easy to replace them
Sent from my GT-N8000 using xda app-developers app
Fair enough, I haven't pulled apart my note (with no intention of doing so any time soon) so haven't looked to see. Also lack of a technical manual doesn't help....
digitizer replacement
I will be swapping the glass on my n8013 shortly and I'm wondering if anyone else has had any success with the less expensive lenses available on eBay. It seems that gtab 1&2 digi's are the same part (yes they are serviceable without melting the glue and prying the glass off) and several of the listings I've seen claim n8000-series compatibility as well. Other listings advertise that they are only for the 8000 series; this may just be marketing, as they appear to be the same part and the same price (almost all are $40-50 except the some that list tab 1 compatibility, as low as $25 for these).
My question is: i know the note uses a "dual digitizer" for more accurate tracking, etc. Am I going to lose accuracy with another digi? Does anyone know how the guts of this thing are designed, will the lens not make a big difference? Or do these parts actually come with the dual digitizer built in? I know these eBay digi's will fit but I don't want my Note to suck at doing Note things, haha
ANY input on this matter is appreciated
Personly I wouldn't risk it. I know that the spen can't be used as a pointer on the tab and tab 2. How much of that is due to the glass itself, I don't know but if you go the cheap way, you may find your s pen no longer works.
To me, it isn't worth the risk,but if you do it, let us know how you got on.
Sent from my GT-I9100 using Tapatalk 2
Hi,
It happened to me once, about 2 months ago...
Euro GT-N8000, ITALY
I bought the replacement digitizer for the GT-N8000 from a store in California for around 70$.
I managed to cleanly open the tablet (I followed a video from yuotube) only to find that the replacement digitizer was a couple of mm too big.
Obviously it didn't fit...
At the end I had to send that tablet to a local Samsung service, and I had to pay 250 € to get it fixed. They replaced the digitizer, the lcd panel and the metal body.
dREI
Sent from my GT-N8000 using Tapatalk HD
drei666 said:
Hi,
It happened to me once, about 2 months ago...
Euro GT-N8000, ITALY
I bought the replacement digitizer for the GT-N8000 from a store in California for around 70$.
I managed to cleanly open the tablet (I followed a video from yuotube) only to find that the replacement digitizer was a couple of mm too big.
Obviously it didn't fit...
At the end I had to send that tablet to a local Samsung service, and I had to pay 250 € to get it fixed. They replaced the digitizer, the lcd panel and the metal body.
dREI
Sent from my GT-N8000 using Tapatalk HD
Click to expand...
Click to collapse
Wow that is almost the price of a new one now
success!
Ordered the Note 8000 8010 8013 replacement digi from ebay seller Gadgetfix in California. Unfortunately I didnt order one with the matching grey border around the screen, my new one is black instead but I dont mind. I opened the Note and carefully proceeded to dismantle it, taking extra care with the shards of glass that were stuck in the screen bezel with adhesive. After reassembly and turning it back on with my fingers crossed, it works perfectly! S pen, airview, hover, all 100% functional, and no issues with sizing, etc. I checked the part numbers on the original and replacement and they seemed to match up, although they were off by a digit or two, presumably because of the difference in color. Note: I made sure to buy the model that ONLY listed compatibility with the Note line, and didn't have model numbers listed for any of the Tab series (those were about $25 and mine was $45).
Anyway, I now have a clean-looking, fully functional , killer tablet and it only cost me an extra $45 and some sweat to fix my glass . Pics to follow.
I have a Samsung Galaxy Tab 2 10.1 that I got from somebody to replace the cracked screen. This is not my first screen repair but it is my first time working with these Samsung tablets. I went out and bought a new screen for it which showed up in the mail damaged, so I contacted the seller and he sent a new one which was in good condition when it arrived. I went ahead and put it on the tablet with no problems. I turned the tablet on and it didn't work. I googled the problem and then I found out that there are different revisions of this screen. The screen that i had installed onto the tablet was a rev 0.2 and the one that arrived damaged was a rev 0.3. None of the screens work including the original but I think that is due to it being broken beyond use while I was removing it.
The original screen doesn't say what revision it is. The flex cable has MCF-101-0403-V3 ISU 1238 on the cable. Would this be a rev 0.0 cable? I am assuming that it is because there is no stated revision number on it.
I have found this item on ebay - http://www.ebay.ca/itm/Samsung-Gala...ablet_eReader_Accessories&hash=item5657a7329f
The ad says that it is universal and that it will work for all versions. Is this even possible? I want to make sure that it will work because it is quite expensive.
I really need to get this tablet fixed because the owner has waited a long time and I'm still no closer to fixing it.
Any replies or help will be extremely appreciated!
canadaboy25
That is the one I used for my Galaxy Tab 2 from that same seller and it worked fine. Mine was p5113 Rev2
Did it have the pre-applied adhesive on the back side?
Replacing the LCD or the Digitiser
I have a p5113 and replacing the digitiser was fairly easy. You have to buy the parts with the tools included. I used the prying tools and a hair dryer(you may use a heat gun )to removing the digitiser. On the LCD you may have to unscrew. Be mindful to work in an area that is dust free and you are bound to have broken glass if the digitiser is being replaced. Take a look at eBay or Amazon for the replacement kits. They are pretty cheap to replace. Also take a look at YouTube videos for the replacement of the screen and digitiser.
Good day to you Sir/Madam,
Its been a year now since my screen phone broke accidentally and up until now I've been searching for a spare screen for my phone. I bought it on China when we docked in shanghai via internet with a help from my Chinese colleague(I bought 2 units), but a year after both of the screen unfortunately cracked and I couldn't find any replacement for parts here in my country (Philippines). Up until now I've been searching for a spare part for my screen replacement because those phone has a huge sentimental value for me and I cannot just dispose it or let it sit around in my closet. I was just wondering if someone can help me find a spare screen for my phone. its just the protective screen from the housing that was cracked because the screen display is still operating, but the screen is not responding to touches. thank you in advance Sir/Madam and I whole heartedly be thankful if someone can be able to help me in my situation.
Thank you and more power!!