XT1045 Cricket - Stuck in fastboot, everything fails - Moto G Q&A, Help & Troubleshooting

XT1045, so I can't unlock the bootloader. The phone does not accept any available XT1045 image, and rejects the boot and system partitions with "hab check failed for boot", "hab checked fialed for recovery" and "Invalid PIV signed system image". Is there any way to fix it? Any stock firmware available to flash? After failing the flash, the phone reboots into fastboot again, with reason "Fall-through from normal boot mode"

Related

Phone Stuck in Fastboot after Factory Reset & OTA Update

Background:
I was having issues with my front/rear cameras failing to initialize sometimes, so I decided to do a factory reset of my phone. I was on 9.18, both rooted and unlocked (I unlocked prior to going to 9.18). I was able to use the RAZR Utility to downgrade to 4.1.2 and then root again. However, when I did the OTA update for my phone, the update failed and now my phone is stuck in "AP Fastboot Flash Mode (S)".
On the Fastboot screen it reads:
downgraded security version
update gpt_main version failed
failed to hab check for gpt_backup: 0x35
failed to load GPT
CID Read Failure
Invalid CID status 0x69
No SP partition found
Fastboot Reason: Invalid GPT
I have tried using RSD Lite to go to 9.30, but it keeps failing (I may be doing something wrong...). If anyone could provide any help, it would be greatly appreciated!
** Solved **
Used bweN diorD's modded utility to reformat the GPT partitions, all is well.
http://forum.xda-developers.com/showpost.php?p=49376894&postcount=6

Stuck in recovery <3e>

I tried flashing Kitkat from 4.3 using the Minimal ADB and Fastboot method and after rebooting, my phone didn't start and is stuck in recovery mode, not the CWM i had previously installed, just the default Android system Recovery, tried wiping everything but no success.
I have x1032 with 4.3 rooted and bootloader unlocked, also CWM installed now i don't know what to do, please help, how do i make my phone functional again?
thanks
edit: i can boot fastboot mode too but none of the options work, tried reflashing KitKat with the same method and this is what i've found
when i put ''mfastboot.exe flash partition gpt.bin ''
it says
''(bootloader) preflash validation failed
FAILED (remote failure)''
and the phone says ''version downgraded for primary_gpt''
then i get these error while putting the other commands
''hab check failed for boot''
''hab check failed for recovery''
''hab check failed for system''
''Invalid PIV signed system image''
Check the forum, it's all there.

[Q] [URGENT][Help needed][Moto G failed to validate boot image]

HI
I was flashing the GPe image on my XT1033 and while flashing the boot.img and logo.bin i got an error - out of memory , but rest of the parts like system.img etc flashed properly and now my phone won't boot giving me the error "failed to validate boot image'.
I am stuck at the bootloader screen and now neither can i flash some other image since my phone isn't being recognized anymore with cmd showing the message 'waiting for device'
Can someone please provide a solution?
Hello.
I faced the same problems when installing the 4.4.4 br firmware and trying to revert to my original firmware.
This happens because you have a locked bootloader and/or maybe you flashed a wrong boot.bin and you can't reflash boot.img because the bootloader is locked!
What I did is unlock the bootloader and all my problems vanished.. -_- reflash all the files using mfastboot, if it gives you errors on gpt.bin and motoboot.img dont worry and go on with the rest.
Oh, and one strange thing that I luckily figured out, is that to get the device recognized by the PC in the fastboot mode you got to enter fastboot MANUALLY. THat is, press volume down 3 seconds and then power on.
It's gotta say: Fastboot reason: Volume-down key pressed.
If you try to boot and it enters fast boot and gives you the error, for some reason doesn't recognize.

Droid Razr Maxx HD (XT926) Stuck on Setup Wizard

Hi XDA,
I have a Droid Razr Maxx HD (XT926) with Android KitKat 4.4.2 (183.46.15)
I want to upgrade to Android Lollipop.
I use Droid Razr HD Utility 1.21. On menu choice, I select option 1 - Flash 4.1.2 Stock System, Kernel, and Radio (Data Wipe) [from AP Fastboot] and it FAILED when sending "system" with log "Preflash validation failed", on my phone has log "Partition (system) Security Version Downgraded, PIV block validation for system failed, Invalid PIV Image: system" and when sending "boot" with log "Preflash validation failed" and my phone has log "Partition (boot) Security Version Downgraded, Preflash validation failed for boot". After that, it erasing userdata, cache and sending modem, modemst1, modemst2 and auto reboot.
After reboot, my phone gets to this first time Setup Wizard, when I press Start it shows, "Please wait, this may take a few minutes" and it gets stuck there . I have tried putting it on full battery and charger and leaving it to do so overnight and in the morning it still shows that message :crying: . Can you please help me to get past this Setup Wizard so I can use my phone again?
Thanks for all!
First, you can't upgrade, downgrade, or otherwise replace your firmware under 183.46.15, unless you had unlocked your bootloader before upgrading to that version. If your bootloader is still locked, then you're stuck. There is no known method for unlocking the bootloader under 183.46.15. Attempts to do so generally end badly, as you have discovered. You can, however, get root access.
Second, the method I would try to repair your phone is to use RSD Lite and reflash the stock firmware to your phone, the same version you had before. Any other version will fail to install correctly.

Moto g6 xt1925dl stuck in fastboot - failed to validate boot img

Having major issues. The bootloader on this device is locked and I accidentally flashed The wrong firmware. Now I just get a " failed to validate boot img failed" message. Cannot flash anything except for bootloader.img and a few other files in the stock firmware.

Categories

Resources