hello everyone
i have a G2 D800.its orginal rom was 20y.
i installed TWRP D800. and then cloudy g2 3.3. no problem after reboot.worked perfect.
then installed dorimanx lollipop d800 .perfect working after reboot.
after a few days i installed custom D80030F ported from stuck 30F .i recently used this befor installing cloudy..then installed dorimanx lollipop.
reboot and critical error! no download mode.no recovery.no rom.NOTHING!a alive brick !!
a guy told me i have to open back door and short a capacitor ,while phone is connected to pc.connected as DLOADER 9008&9006
he bumped my emmc using board diag.and rewrited on that.phone went to DL Mode and i flashed kitkat v20b.
now i have no touch.everything is working FINE BUT TOUCH.,
tried cyanogen mod 13>>>didnt work
tried cloudy g2 3.3 >>>didn't work
tried cloudy g3 >>>didn't work
jelly bean stuck>>>didn' work
updating touch firmware in all above roms (but cyan)>>>didnt work
dorimanx on all above ofcourse not working.
does touch is dead?or from touch IC?
help please
just need help.i don't expect anyone.
Related
hi i have a lg p500 rooted and i have CWM installed i have installed to different custom roms 1 jb and ics and both did not let me use mobile , i worked out it was a baseband problem, so now i want to install gb official on my phone going the whole official lg way so i can get the new baseband but my phone has never connected with my pc properly and i cant use the mobile support tool properly, next problem i wont brick my phone right, going from a rooted 2.2 to a non- rooted 2.3 with a cwm recovery instead of the normal 1, thanks :cyclops: , sorry for my noobiness
hi !
i have LG P500 with 2.2 android.
i've rooted the phone, then flashed 5.0.2.0 recovery
than flashed rom from the developing forum here.
i've noticed i had no network available
than i've tried to flash the old bb fix after flashing 3 diffrents roms, and now i have a black screen after a white LG logo.
can anyone help please???
[tried also to update to the new bb [flashing the v20g_00.kdz] but the softwere said PHONE NOT FOUND!]
enemia said:
hi !
i have LG P500 with 2.2 android.
i've rooted the phone, then flashed 5.0.2.0 recovery
than flashed rom from the developing forum here.
i've noticed i had no network available
than i've tried to flash the old bb fix after flashing 3 diffrents roms, and now i have a black screen after a white LG logo.
can anyone help please???
[tried also to update to the new bb [flashing the v20g_00.kdz] but the softwere said PHONE NOT FOUND!]
Click to expand...
Click to collapse
go to emergency mode then try kdz
it will surely work
Hey guys, i'm new to this forum so please forgive me if i posted this thread in the wrong section!So, got my jiayu g3 yesterday and i think i have already bricked it. It came with 4.0.4 stock ICS and I rooted it and installed a 4.1.2 jelly bean rom, however the rom didnt work at first it had the 'status 7' error so i deleted the lines from update-script and it updated fine but in settings it still showed 4.0.4.
now the internet wifi does not turn on, bluetooth doesn't turn on, however i still can use the cellular things but i think my Jiayu G3 is the new 'S501' and the rom i downloaded and tried to flash was 'S500' and that was the reason why it showed the status 7 error?
So guys, i need help!! i have tried everything, i cant do much as i don't have internet working on the phone. I have downloaded a S501 rom but i don't know how to install it without CWM(btw i don't have cwm atm even though i have root) and etc...maybe recovery? Any advice is appreciated!!!
kinggdawg said:
now the internet wifi does not turn on, bluetooth doesn't turn on, however i still can use the cellular things but i think my Jiayu G3 is the new 'S501' and the rom i downloaded and tried to flash was 'S500' and that was the reason why it showed the status 7 error?
Click to expand...
Click to collapse
Download a ROM for the new chipset, either the stock ICS one or a modded JB one. You can find both on needrom.
Hi guys, I really need your help.
I'm a n00b at these matters,couple of weeks ago just got my LG p990 and I've been reading xda forum on it religiously for the past few days.I decided to upgrade my ROM.
First I upgraded to V30a ROM Android 4.0.4. and that went great.But I wasn't satisfied so much with it,and decided to upgrade to cm10.1 nightly ROM.
I rooted Android 4.0.4,installed CWM,backed up my phone
Downloaded the latest CM10.1 for p990 built 20130406.
Downloaded latest gapps and transferred both files to SD card
Started my phone in recovery mode.Did a complete wipe and flashed both cm10.1 and gapps.
Restarted the phone and its been 15 minutes and the phone is turned on but just showing LG logo.I presume this is a boot loop.
This is the second time its happening,since moments ago when it did not boot the first time,i took out the battery and booted it in recovery,did again complete wipe,flashed both cm10 and gapps,and booted it again.Result is the same.
While it was being flashed,I noticed that said it could not find MD5 file.I don't know if that is normal,since as I said before, n00b.
Please help.
EDIT: I did it again,this time without installing gapps.I cleared davlik catche and proceeded to reboot.Then it says: No OS installed,are you sure you want to reboot? So I decided against it and restored v30a ROM.I really want this new ROM,please help.I used instructions to the letter from this video youtube video : [How To] Root and Upgrade LG Optimus Speed/2x [P990] to Android 4.2.2 [JellyBean]
I've been running cloudyg3 2.1 for about 6 months and I've developed an echo problem during calls( on the other end) and I've noticed a lag both problems in the last week. I'm running 4.4.2, M8974A-AAAANAZM-1.0.190084 Baseband, KERNAL VERSION 3.4.102 BUILD KOT491 on a D801 . No other mods. I tried running backup from existing recovery but failed twice. I've redownloaded Autorec , the baseband version and CloudyG3 2.2 as per cloudyfa but haven't run it because id rather be a vagina with an echoing phone than a dude with no phone at all. Would someone mind giving me some advice? Could my problem be solved with a fresh install or upgrading to 2.2? Should I hold my breath for Lp? And could someone walk me through the steps?
I really do appreciate the help and I'll gladly pay it back .
Thanks
[email protected]
dpulley77 said:
I've been running cloudyg3 2.1 for about 6 months and I've developed an echo problem during calls( on the other end) and I've noticed a lag both problems in the last week. I'm running 4.4.2, M8974A-AAAANAZM-1.0.190084 Baseband, KERNAL VERSION 3.4.102 BUILD KOT491 on a D801 . No other mods. I tried running backup from existing recovery but failed twice. I've redownloaded Autorec , the baseband version and CloudyG3 2.2 as per cloudyfa but haven't run it because id rather be a vagina with an echoing phone than a dude with no phone at all. Would someone mind giving me some advice? Could my problem be solved with a fresh install or upgrading to 2.2? Should I hold my breath for Lp? And could someone walk me through the steps?
I really do appreciate the help and I'll gladly pay it back .
Thanks
[email protected]
Click to expand...
Click to collapse
Are you sure that you don't have any tweak? It might be a ROM problem. I suggest you to flash the newest version of CloudyG3. If you have a problem with the recovery, is always good to have it up-to-date and then flash the newest ROM.
In my case I always had problems with the newest versions of Cloudy. I used to have it on my phone until 1.3 version and then the data did not work for me, so decided to go with Optimus G3 1.4.1, which was the last ROM I used in my LG G2 and everything worked smoothly. If you have the availability, give it a try.
SergioRmz said:
Are you sure that you don't have any tweak? It might be a ROM problem. I suggest you to flash the newest version of CloudyG3. If you have a problem with the recovery, is always good to have it up-to-date and then flash the newest ROM.
In my case I always had problems with the newest versions of Cloudy. I used to have it on my phone until 1.3 version and then the data did not work for me, so decided to go with Optimus G3 1.4.1, which was the last ROM I used in my LG G2 and everything worked smoothly. If you have the availability, give it a try.
Click to expand...
Click to collapse
Thanks. I appreciate the help. I found a video on YouTube with some guy flashing the exact same and it turned out fine.
I couldnt get it to back up using TWRP from the first flash of CloudyG3 2.1 so I used LG backup and saved it to pc. Then I flashed the Basrband for KitKat and CloudyG2 2.2 simultaneously. I beleive 2.2 to be the newest. Everything went through for the most part. All important data was there but I did have to reset up my contact profile and my display setting. also also the knock code does not consistently work. it didn't fix my sound issue but it did rerevert my camera back to what I had when I originally flashed G3 2.1. after that's all said and done, I remembered flashing a fix to repair the knock code on 2.1 and that's how I lost the camera in the first place.
anyway, everything's good . I stretched my G2 for an extra year without feeling like I had missed out on anything. I wonder how many others did the same thing. Cloudyfa may want to keep an eye out for LG ninja's. Thanks again.
Dennis Pulley