[6.0.1][ROM] CyanogenMod13 for Gionee M3 - Miscellaneous Android Development

[6.0.1][ROM] CyanogenMod13 for Gionee M3 - Miscellaneous Android Development

Thanks to @dracov76 for his A-GApps
Screenshots:

Is everything working????
Sent from my SM-J500F using XDA-Developers mobile app

Step 4.
arun483 said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0.x (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Disclaimer
Code:
#include <std/disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Installation Guide (Strictly Follow or get bricked)
1. Reboot to recovery
2. Wipe cache ,dalvik, data, system, Android secure and internal (if u want).
3. After wipe Reboot Recovery again
4. Now flash rom zip.
Where is the link to download the rom.zip above in step 4.?
5. Then flash GApps (one provided below only)
6. Reboot system
7. You are done go enjoy Marshmallow.
*Note: If you suffer Google Play Services constant Force Close just reboot into Recovery and wipe Dalvik, Cache and data. Now you are good to go.
Credits: Manjunath Yashu for constantly helping me all the way porting this rom.
Peeps at mtkroms.com who originally ported this rom from MT6582
Ferhung - The man behind CM13 for MTK.
ROM OS Version: 6.0.1 Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: KitKat Stock
Version Information
Status: Stable
Release Date: 2016-04-22

Thanks to @dracov76 for his A-GApps
Screenshots:
Click to expand...
Click to collapse
Where is the link to download the rom.zip above in step 4.?

zipsulman said:
Where is the link to download the rom.zip above in step 4.?
Click to expand...
Click to collapse
Right in the bottom of post you can see big blue Download image just click that it will redirect you to my blog post, the download link is posted there

Is there any bug???
Or everything is working fine???
work hard
be happy and
hello dear

From what I see all is well except the rotation. It doesn't seems to work. I installed cpu-z and it doesn't show any sensors. I gues this is the problem. No sensor is working.

MareleVlad said:
From what I see all is well except the rotation. It doesn't seems to work. I installed cpu-z and it doesn't show any sensors. I gues this is the problem. No sensor is working.
Click to expand...
Click to collapse
Will look into the problem

Didn't work. Error: executing binary fail in zip file.

Hello,
Thank you for this ROM.
I want to know if we can upgrade from android 5.0 ?
Best regards.

You can upgrade it from wherever. As long as you wipe all is OK.
The problem is that this ROM and another based on the same CM 13 doesn't have working sensors. The rotation of the screen doesn't work. Please let me know if for you it works. No other rom has sensor rotation problem for me. Only CM 13. And I am so sad as this is the most fluent and awesome ROM I found for the Gionee M3. It has no stupid customization. It's just as a CM 13 should be. Light and fluent.

arun483 said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0.x (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Disclaimer
Code:
#include <std/disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Installation Guide (Strictly Follow or get bricked)
1. Reboot to recovery
2. Wipe cache ,dalvik, data, system, Android secure and internal (if u want).
3. After wipe Reboot Recovery again
4. Now flash rom zip.
5. Then flash GApps (one provided below only)
6. Reboot system
7. You are done go enjoy Marshmallow.
*Note: If you suffer Google Play Services constant Force Close just reboot into Recovery and wipe Dalvik, Cache and data. Now you are good to go.
Credits: Manjunath Yashu for constantly helping me all the way porting this rom.
Peeps at mtkroms.com who originally ported this rom from MT6582
Ferhung - The man behind CM13 for MTK.
ROM OS Version: 6.0.1 Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: KitKat Stock
Version Information
Status: Stable
Release Date: 2016-04-22

Thanks to @dracov76 for his A-GApps
Screenshots:
Click to expand...
Click to collapse
Hi! Thanks for the ROM but do we have a fix for the sensors?

I second that please find a fix for the sensors on CM 13 and I will be VERRY happy to move to CM 13 forever without looking back. Thank you for all your efort.

Did not work for me
Hi! Thank you for the ROM but unfortunately it did not work for me!! I followed all the instructions and did everything but after rebooting the device all I got was a BLINKING BLACK screen with a RED BAR and a logo, I waited for more than 30 minutes thinking that it might work but sadly it did not!!
Any help is appreciated in this regard... Thanks.
---------- Post added at 04:37 PM ---------- Previous post was at 04:03 PM ----------
May be it did not work for me because I did it from Lollipop instead Kitkat, should I be doing it from kitkat? If yes, please let me know any specific version as I have all of'em .... Thanks in advance for any work around.
Also, please let me know if CM12.1 r33 is stable and does not have any bugs and I can use it without any issues instead the stock rom...

deepak21 said:
Hi! Thanks for the ROM but do we have a fix for the sensors?
Click to expand...
Click to collapse
Here https://drive.google.com/file/d/0B9HdHGqBVeaObUU1bVBfbVNnV0U/view?usp=docslist_api
MareleVlad said:
I second that please find a fix for the sensors on CM 13 and I will be VERRY happy to move to CM 13 forever without looking back. Thank you for all your efort.
Click to expand...
Click to collapse
Here https://drive.google.com/file/d/0B9HdHGqBVeaObUU1bVBfbVNnV0U/view?usp=docslist_api
deepak21 said:
Hi! Thank you for the ROM but unfortunately it did not work for me!! I followed all the instructions and did everything but after rebooting the device all I got was a BLINKING BLACK screen with a RED BAR and a logo, I waited for more than 30 minutes thinking that it might work but sadly it did not!!
Any help is appreciated in this regard... Thanks.
---------- Post added at 04:37 PM ---------- Previous post was at 04:03 PM ----------
May be it did not work for me because I did it from Lollipop instead Kitkat, should I be doing it from kitkat? If yes, please let me know any specific version as I have all of'em .... Thanks in advance for any work around.
Also, please let me know if CM12.1 r33 is stable and does not have any bugs and I can use it without any issues instead the stock rom...
Click to expand...
Click to collapse
Will PM you with all links

arun483 said:
Here https://drive.google.com/file/d/0B9HdHGqBVeaObUU1bVBfbVNnV0U/view?usp=docslist_api
Here https://drive.google.com/file/d/0B9HdHGqBVeaObUU1bVBfbVNnV0U/view?usp=docslist_api
Will PM you with all links
Click to expand...
Click to collapse
IT WORKS IT WOOOOORKS !!!!!
Thank you so much. You are great. The rotation works. I'm on CM13. It's great.
I am so happy. Thank you once more for your help!

MareleVlad said:
IT WORKS IT WOOOOORKS !!!!!
Thank you so much. You are great. The rotation works. I'm on CM13. It's great.
I am so happy. Thank you once more for your help!
Click to expand...
Click to collapse
Glad to know that it helped stay tuned to my blog for new rom updates for Gionee M3

I'm waiting for your message, please PM me ASAP.... also, do let me know if I need to flash the device from Kitkat of I can do it from Lollipop also..
Thanks.

MareleVlad said:
IT WORKS IT WOOOOORKS !!!!!
Thank you so much. You are great. The rotation works. I'm on CM13. It's great.
I am so happy. Thank you once more for your help!
Click to expand...
Click to collapse
Hi, did you upgrade your device from Kitkat or Lollipop because I tried it from Lollipop but it did not work for me...

deepak21 said:
Hi, did you upgrade your device from Kitkat or Lollipop because I tried it from Lollipop but it did not work for me...
Click to expand...
Click to collapse
Hi
I upgraded from CM 12

deepak21 said:
Hi, did you upgrade your device from Kitkat or Lollipop because I tried it from Lollipop but it did not work for me...
Click to expand...
Click to collapse
As long as you are on 3.4.67 kernel you can flash this rom.

Related

[RR 5.6.8] [AICP 11.0] [STABLE] [PORTED] [TECNO J7] [MARSHMALLOW]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
About Resurrection Remix
Resurrection Remix the ROM has been based on CM,slim.omni and original Remix ROM builds, this creates an awesome combination of performance, customization, power and the most new features, brought directly to your Device
Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
Special thanks to, the CM team,OMNI team ,SLIMROMS and of course to all the supporters.
I am very pleased to present you RR Marshmallow Rom for Tecno J7..
If you to know more about the functions of the ROM ,Google is your friend.
AICP
AICP is known by everyone as Ice Cold Project that started on Desire HD and since then evolved into a mature ROM with the BEST community you can find!!!
Until Lollipop, Rom has always been AOKP based. Unfortunately, since AOKP either stopped development or will make a comeback later this year, we changed our base to CM when it comes to hardware, drivers and some features.
If there are any bugs, either we will sort them or CM team if it concerns their modifications. This rom isn't CM supported so no need to report errors or bugs to them!!
ROM: AiCP11 Download
Do not edit system files ,it will break OTA..
INSTALLATION
nstallation Instructions
- Download the latest build of Resurrection ROM
- Download Gapps
- Take a nandroid backup
- Required - Wipe system, cache, dalvik cache
- Recommended - Wipe data (REQUIRED when coming from anything other than RR5.6.x)
- Flash ROM and Gapps using latest TWRP recovery
- Reboot.
- First boot may take a while... (up to 15 minutes)
- Enjoy!
UPDATE INSTRUCTIONS
- Download the latest build of Resurrection Remix ROM
- Take a nandroid backup
- Flash ROM using recovery
- Flash Gapps
- Wipe cache
- Wipe dalvik cache
- Reboot
- Enjoy!
Downloads
ROM:RR DOWNLOAD
OPENGAPPS:OPENGApps
RECOVERY:TWRP 2.7.0.1
SOUND FIX:SoundFix For Tecno J7 (UPDATED)
BUGS
*GPS Partially working..
*You tell me ..
Credits
*All Developers names ,check the source link..
XDA:DevDB Information
Tecno J7 ROMS, ROM for all devices (see above for details)
Contributors
majorkid, ajit,mtkroms
Source Code: http://www.mtkroms.com/2016/05/stable-ota-resurrection-remix-mm-mt6582.html
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Tecno J7
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 5.6.8
Beta Release Date: 2016-05-02
Created 2016-05-15
Last Updated 2016-06-09

Reserved

..

Randula Hemal said:
..
Click to expand...
Click to collapse
Can you build from source l

Guys, New AICP Build is Up...
Make sure you trt it our...

sound problem back again (i solved it)
Bluetooth not working

Mohammed Eihab said:
sound problem back again (i solved it)
Bluetooth not working
Click to expand...
Click to collapse
How did you solve the sound ?
Maybe I can fix it next build..

majorkid said:
How did you solve the sound ?
Maybe I can fix it next build..
Click to expand...
Click to collapse
u know sound was working fine in 5.6.7 version so i just reblace sound's files
__
one more thing... the camera reading on stok rom "8.2MP"
but in ur rom it's "8.0MP"
i know it's not too much but if u can fix it i'll be thankful
---------- Post added at 12:20 AM ---------- Previous post was at 12:03 AM ----------
what's the difference between "RR" & "AICP" !!!?

Mohammed Eihab said:
u know sound was working fine in 5.6.7 version so i just reblace sound's files
__
one more thing... the camera reading on stok rom "8.2MP"
but in ur rom it's "8.0MP"
i know it's not too much but if u can fix it i'll be thankful
---------- Post added at 12:20 AM ---------- Previous post was at 12:03 AM ----------
what's the difference between "RR" & "AICP" !!!?
Click to expand...
Click to collapse
Those are two ROM..

But i've added flashable zip for sound..

majorkid said:
Those are two ROM..
Click to expand...
Click to collapse
majorkid said:
But i've added flashable zip for sound..
Click to expand...
Click to collapse
yeah but it's not flashing
i mean what's better RR or AICP ???

I guess it depends on the User ,try both of them..when you flash the zip ..does it give errors ?

Guys ,New Sound Fix Is up,Try if it works And post your results..
Thanks

Thankx man but i already fix it by my self
.....
What about the camera ?!
Will u fix it ?
And the mobile data is not stable
..please wright that number in facebook search and send me an add so i can talk to u
00201277587290

Google OS not supporting google apps
Can anybody supply me with a working gms apk? Literally, every service apk gives out connection problem, heard its a CM issue, and if any one of us want to use this thing daily we kinda need it to support google services, don't you say? Whats the solution? Ma phone is about to fry from continued formatting of the system partition. And NEXT TIME, please check if it works with play services cause it doesn't, both AICP 11 and RR X.X.7 and 8
tried:
Open gapps stock(don't do it)
Open gapps nano
Gapp package from XDA
Different play service apks, lots of em.
Upgraded ma TWRP to 3.0, nothing
Clean installed it 5 times in a day, (I must really like android 6)
All don't connect and throw the infamous error.
BTW, the sound fix, does it also brings the stock bass ? If anyone could do that, it would be awesome, cheers

majorkid said:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
About Resurrection Remix
Resurrection Remix the ROM has been based on CM,slim.omni and original Remix ROM builds, this creates an awesome combination of performance, customization, power and the most new features, brought directly to your Device
Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
Special thanks to, the CM team,OMNI team ,SLIMROMS and of course to all the supporters.
I am very pleased to present you RR Marshmallow Rom for Tecno J7..
If you to know more about the functions of the ROM ,Google is your friend.
AICP
AICP is known by everyone as Ice Cold Project that started on Desire HD and since then evolved into a mature ROM with the BEST community you can find!!!
Until Lollipop, Rom has always been AOKP based. Unfortunately, since AOKP either stopped development or will make a comeback later this year, we changed our base to CM when it comes to hardware, drivers and some features.
If there are any bugs, either we will sort them or CM team if it concerns their modifications. This rom isn't CM supported so no need to report errors or bugs to them!!
ROM: AiCP11 Download
Do not edit system files ,it will break OTA..
INSTALLATION
nstallation Instructions
- Download the latest build of Resurrection ROM
- Download Gapps
- Take a nandroid backup
- Required - Wipe system, cache, dalvik cache
- Recommended - Wipe data (REQUIRED when coming from anything other than RR5.6.x)
- Flash ROM and Gapps using latest TWRP recovery
- Reboot.
- First boot may take a while... (up to 15 minutes)
- Enjoy!
UPDATE INSTRUCTIONS
- Download the latest build of Resurrection Remix ROM
- Take a nandroid backup
- Flash ROM using recovery
- Flash Gapps
- Wipe cache
- Wipe dalvik cache
- Reboot
- Enjoy!
Downloads
ROM:RR DOWNLOAD
OPENGAPPS:OPENGApps
RECOVERY:TWRP 2.7.0.1
SOUND FIX:SoundFix For Tecno J7 (UPDATED)
BUGS
*GPS Partially working..
*You tell me ..
Credits
*All Developers names ,check the source link..
XDA:DevDB Information
Tecno J7 ROMS, ROM for all devices (see above for details)
Contributors
majorkid, ajit,mtkroms
Source Code: http://www.mtkroms.com/2016/05/stable-ota-resurrection-remix-mm-mt6582.html
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Tecno J7
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 5.6.8
Beta Release Date: 2016-05-02
Created 2016-05-15
Last Updated 2016-06-09
Click to expand...
Click to collapse
The soundfix has a syntax error on the updater script, filled the semi-colons and manually mounted system(error 7)
, seems to be working, the ear piercing sound the dial buttons generate is gone

FitseMan said:
The soundfix has a syntax error on the updater script, filled the semi-colons and manually mounted system(error 7)
, seems to be working, the ear piercing sound the dial buttons generate is gone
Click to expand...
Click to collapse
Don't quote the OP post ..
Okey .. Good to know ..

majorkid said:
Don't quote the OP post ..
Okey .. Good to know ..
Click to expand...
Click to collapse
Sorry for that, been too long. The gapps thing could stem from the inability to support VPN, which i just confirmed from the source site, the current situation in ma country requires me to use VPN for now, play services specifically need VPN to work, again...for now....I hope. Ppl here do half baked stuff so they might never allow it otherwise.So, just to clarify confirm if gapps work without vpn. Keep up the good work :good::good:

Currentl y I'm using Tecno J7 RR 5.7.1 And GApps is working ,Google Service is Working Well ..
As for you situation for VPN services , I don't use VPN and I've no use for it but as this ROM was compiled from source it does have Bugs , in the latest version of RR 5.7.1 GPS was fixed , Don't worry a fix will come.
About GApps again , I recommended Pico GApps , And you must choose 6.0.1 Arm architecture..
It does work With AICP and RR together , I use the same GApps for flashing any ROM ..
Sound Fix is coming , PM please I'll send a zip for you to test it ..
If you want the New RR 5.7.1 PM also..
"Tired from typing the long paragraph"

tried
how far, how many people have tried it out

[ROM][7.1.2][UNOFFICIAL][SM-J210F] LineageOS 14.1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 7 (nougat), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
What's Working:
Boots
RIL (Calls, SMS, Data)
Wifi
Bluetooth
Camera
Camcorder
Audio
Sensors
Flash
GPS
Microphone
Etc.
Known Issues:
VoLTE isn't working (Jio 4G users can use Jio4GVoice app to fix the problem temporarily)
No Smart Glow feature
Installation Instrctions:
Flash TWRP-3.1.1 - Link [NECESSARY]
Download the ROM (Latest build) & GApps (Recommended GApps: ARM,7.1,PICO or other)
Reboot to TWRP Recovery
Wipe Data factory reset
Install the ROM ,then GApps
Reboot!
Check the SCREENSHOTS tab, for screenshots!
Changelogs:
Code:
[01-11-2017]
- Disabled f2fs for now (f2fs driver broken)
- Now SD Card can be formatted as Internal
- Back to camera hal1.0 (Hal3 is quite buggy)
- Video recording fixed
- RIL Improvements
- Better Battery performance
[16-10-2017]
- Latest October security patches mearged
- Improved Sensors & Samsung Battery fuelguage
- Other Minor fixes.
[08-10-2017]
- Lots of Camera Improvements (Including Picture Quality)
- Enabled HAL3/API2 for camera
- Added HDR Mode for front camera.
[01-10-2017]
- Fixed GPS
- Fixed "Not Importing contacts from SIM card"
- Minor RIL improvements
[28-09-2017]
- Initial Release
Downloads:
TWRP-3.1.1: recovery.tar.md5 [RECOMMENEDED]
ROM:
Build 28/09/2017: lineage-14.1-20170928-UNOFFICIAL-j2xlte.zip
Build 01/10/2017: lineage-14.1-20171001-UNOFFICIAL-j2xlte.zip
Build 08/10/2017: lineage-14.1-20171008-UNOFFICIAL-j2xlte.zip
Build 16/10/2017: lineage-14.1-20171016-UNOFFICIAL-j2xlte.zip
Build 01/11/2017: lineage-14.1-20171101-UNOFFICIAL-j2xlte.zip [LATEST BUILD]
Gapps: http://opengapps.org/ [Must be ARM,7.1]
Trees:
Kernel Source: https://github.com/AndroidDevelopersTeam/android_kernel_samsung_j2xlte_dd
XDA:DevDB Information
LineageOS 14.1 Nougat , ROM for Samsung J2 (2016)
Contributors
Aditya Kr , djeman
Source Code: http://www.github.com/LineageOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock Touchwiz Marshmallow
Based On: LineageOS
Version Information
Status: Stable
Created 2017-09-28
Last Updated 2017-11-01
Please read the F.A.Q.s in the second post below!

Frequently asked questions (FAQ):-
Q: Is the ROM will work perfectly on my device?
A: Yeah, It will work more than perfect if you don't use VoLTE and Smart Glow!
Q: What does VoLTE means? Is it LTE?
A: No, LTE isn't VoLTE. Voice over LTE (VoLTE) is a standard for high-speed wireless communication for mobile phones and data terminals. It allows HD voice calling, faster calls connecting, etc.
Q: How does broken VoLTE effects the ROM?
A: You can't recieve or make calls via your VoLTE dependent carriers.
Temporary solution: Use Jio4GVoice app. It fixes the problem. [Only for Jio 4G users]
Q: Does LTE works in this ROM?
A: Yeah, All data connections including LTE,H+,E is working perfectly.
Q: What is Smart Glow?
A: Its a feature specially made for Samsung J2 (2016)/Pro that used as Notification LED and used for back camera selfie.
Q: How to root the ROM?
A: The easiest and official way to root is:
Download this zip: LINK
Go to recovery and flash the zip.
Open Settings>About phone and tap on "build number" 4-5 times to enable Developer option.
Go back and open Settings>Developer options
Select Root access to "Apps and ADB"
Q: How to use xposed?
A: There are already lots of guides all over the web, use them!
Q: How to flash the TWRP Recovery?
A: You have to flash it using Odin via PC.
Q: How to flash the latest TWRP Recovery if I'm already in the old one?
A: Extract the recovery.img from recovery.tar.md5, got to old TWRP Recovery, Install>Install image>Select recovery.img>Choose Recovery>Flash!
Q: I'm getting error while installing the ROM, what's the problem.
A: You have to flash the latest twrp recovery(link in post) before installing the ROM.
Q: How to backup your all data,system,etc of current ROM before flashing new ROM?
A: Open TWRP>Backup and make backup(Make sure you have enough space to make backup). If you want to revert back to the the previous ROM, Open TWRP>Restore and restore by browsing the backup you made.

Awesome.
√√ keep rocking .
thumbs up up

Bro great work
Finally custom rom for us!
Thanks
Hope no bugs in rom soon!
Test it soon.

VoLTE bug fixed
Hey; I've fixed the VoLTE bug

need flashable recovery
Can anyone make the recovery flashable zip

How to Revert to stock rom without pc?
How to get back you to stock rom without using pc /odin .
Because I donot have pc that is why I am asking.
Reply plz so I can install Lineage os as soon as possible.

How to root this rom?
Firstly, Thanks for making such great ROM.
I have installed it and it works smoothly.
Now I wanted to know how to root on this ROM..
And whether I can use Xposed framework..
Thanks in advance..

Saurabh3498 said:
Firstly, Thanks for making such great ROM.
I have installed it and it works smoothly.
Now I wanted to know how to root on this ROM..
And whether I can use Xposed framework..
Thanks in advance..
Click to expand...
Click to collapse
It is not recommended to use unofficial xposed on Nougat just yet.
You can flash Super Su v2.82 SR4 in recovery to get root.
---------- Post added at 11:38 AM ---------- Previous post was at 11:21 AM ----------
NeoHBz said:
Hey; I've fixed the VoLTE bug
Click to expand...
Click to collapse
Then kindly share the process of doing that.☺

Savitar99 said:
How to get back you to stock rom without using pc /odin .
Because I donot have pc that is why I am asking.
Reply plz so I can install Lineage os as soon as possible.
Click to expand...
Click to collapse
Saurabh3498 said:
Firstly, Thanks for making such great ROM.
I have installed it and it works smoothly.
Now I wanted to know how to root on this ROM..
And whether I can use Xposed framework..
Thanks in advance..
Click to expand...
Click to collapse
n.s.sivashankar said:
Can anyone make the recovery flashable zip
Click to expand...
Click to collapse
NeoHBz said:
Hey; I've fixed the VoLTE bug
Click to expand...
Click to collapse
Mr.Ak said:
It is not recommended to use unofficial xposed on Nougat just yet.
You can flash Super Su v2.82 SR4 in recovery to get root.
---------- Post added at 11:38 AM ---------- Previous post was at 11:21 AM ----------
Then kindly share the process of doing that.
Click to expand...
Click to collapse
Read the second Post(Below the ROM THREAD). I've updated F.A.Q.s , you will get your answers there.
And @NeoHBz, LTE and VoLTE(Voice over LTE) are different thinks. And LTE is already working perfectly.
I've read your FB comment claiming that you've fixed VoLTE, actully it wasn't VoLTE you fixed, it was LTE that you are claiming to be fixed. But LTE is already working!
Kindly research about what you are saying!

Downgrading back to stock mm
Do I have to simply restore the twrp backup of stock rom by your twrp v3.11 or by old twrp of mm?
Clear it plz.
Because once I Hard bricked samsung galaxy y phone while downgrading .

Aditya Kr said:
Read the second Post(Below the ROM THREAD). I've updated F.A.Q.s , you will get your answers there.
Click to expand...
Click to collapse
To be more specific in your FAQ,
A: You can't recieve or make calls via your 4G sim.
Click to expand...
Click to collapse
It should be "VoLTE dependent carrier" instead of just "4G sim" ,as you know there are also carriers that provides 4G service,but doesn't depends on VoLTE for calls and stuff at all(airtel,for example).

Mr.Ak said:
To be more specific in your FAQ,
It should be "VoLTE dependent carrier" instead of just "4G sim" ,as you know there are also carriers that provides 4G service,but doesn't depends on VoLTE for calls and stuff at all(airtel,for example).
Click to expand...
Click to collapse
Yeah correct, thanks for the correction!

Savitar99 said:
Do I have to simply restore the twrp backup of stock rom by your twrp v3.11 or by old twrp of mm?
Clear it plz.
Because once I Hard bricked samsung galaxy y phone while downgrading .
Click to expand...
Click to collapse
Both will work, if it won't work with new one, flash the previous twrp and restore.

Doubt.
I read your FAQ post on this thread.
I've successfully rooted my device.
Now I want to install Xposed Framework.
Have you tested any method that works?
Post it here..

Saurabh3498 said:
I read your FAQ post on this thread.
I've successfully rooted my device.
Now I want to install Xposed Framework.
Have you tested any method that works?
Post it here..
Click to expand...
Click to collapse
https://forum.xda-developers.com/xposed/xposed-android-nougat-sdk-25-arm64-t3639221
N.B
You're on your own when you flash xposed,developer of this rom will not support you for any bugs(or even bootloops) you might encounter.As unofficial xposed is currently unstable,only god knows what works and what not.

Thanks.
Mr.Ak said:
https://forum.xda-developers.com/xposed/xposed-android-nougat-sdk-25-arm64-t3639221
N.B
You're on your own when you flash xposed,developer of this rom will not support you for any bugs(or even bootloops) you might encounter.As unofficial xposed is currently unstable,only god knows what works and what not.
Click to expand...
Click to collapse
I found a way to install Xposed Framework..
I installed it successfully!
I referred to this video : https://www.youtube.com/watch?v=eTubpODzeMM
PS: Download ARM SDK 25 file.
Once again thanks for developing such a great rom. :angel:

Jio 4Gvoice is not even working
Aditya Kr said:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 7 (nougat), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
What's Working:
Boots
RIL (Calls, SMS, Data)
Wifi
Bluetooth
Camera
Camcorder
Audio
Sensors
Flash
GPS
Microphone
Etc.
Known Issues:
VoLTE isn't working (Jio 4G users can use Jio4GVoice app to fix the problem temporarily)
No Smart Glow feature
Installation Instrctions:
Flash TWRP-3.1.1 - Link [NECESSARY]
Download the ROM & GApps (Recommended GApps: ARM,7.1,PICO or other)
Reboot to TWRP Recovery
Wipe Data factory reset
Install the ROM ,then GApps
Reboot!
Check the SCREENSHOTS tab, for screenshots!
Downloads:
TWRP-3.1.1: recovery.tar.md5 [RECOMMENEDED]
ROM: lineage-14.1-20170928-UNOFFICIAL-j2xlte.zip
Gapps: http://opengapps.org/ [Must be ARM,7.1]
XDA:DevDB Information
LineageOS 14.1 Naugat , ROM for Samsung J2 (2016)
Contributors
Aditya Kr
Source Code: http://www.github.com/LineageOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock Touchwiz Marshmallow
Based On: LineageOS
Version Information
Status: Stable
Created 2017-09-28
Last Updated 2017-09-28
Please read the F.A.Q.s in the second post below!
Click to expand...
Click to collapse
Even the Jio4Gvoice is not working please how to fix this ?

Moose.111 said:
Even the Jio4Gvoice is not working please how to fix this ?
Click to expand...
Click to collapse
It's working fine for me,
You have to use Jio 4G LTE data connection to make it work.

volte fix zip please
:angel::angel::angel:
Aditya Kr said:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 7 (nougat), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
What's Working:
Boots
RIL (Calls, SMS, Data)
Wifi
Bluetooth
Camera
Camcorder
Audio
Sensors
Flash
GPS
Microphone
Etc.
Known Issues:
VoLTE isn't working (Jio 4G users can use Jio4GVoice app to fix the problem temporarily)
No Smart Glow feature
Installation Instrctions:
Flash TWRP-3.1.1 - Link [NECESSARY]
Download the ROM & GApps (Recommended GApps: ARM,7.1,PICO or other)
Reboot to TWRP Recovery
Wipe Data factory reset
Install the ROM ,then GApps
Reboot!
Check the SCREENSHOTS tab, for screenshots!
Downloads:
TWRP-3.1.1: recovery.tar.md5 [RECOMMENEDED]
ROM: lineage-14.1-20170928-UNOFFICIAL-j2xlte.zip
Gapps: http://opengapps.org/ [Must be ARM,7.1]
XDA:DevDB Information
LineageOS 14.1 Naugat , ROM for Samsung J2 (2016)
Contributors
Aditya Kr
Source Code: http://www.github.com/LineageOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock Touchwiz Marshmallow
Based On: LineageOS
Version Information
Status: Stable
Created 2017-09-28
Last Updated 2017-09-28
Please read the F.A.Q.s in the second post below!
Click to expand...
Click to collapse

[ROM][7.1.2][FINAL] AOSPA Paranoid v7.3.1 for Honor 8 Lite

Paranoid Android is a custom ROM aiming to extend the system, working on enhancing the already existing beauty of Android and following the same design philosophies that were set forward by Google for Android Open Source Project.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
* Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Compatible device?:
Code:
[LIST]
[*]All devices that use hi6250 chipset and use kernel 4.1.
[/LIST]
Mandatory:
* hit thank buttons, it's free.
* want more roms for P8 Lite 2017/P9 Lite 2017, simply bring me up beers by the following button.
Requirements:
TWRP.
Unlocked bootloader.
Unlocked FRP.
vendor.img: you must be on stock one, so don't wipe it because with other custom vendor.img will never ever boot.
Installation Guide:
Make sure to the stock backup saved on pc, I'm not responsible for any bricked or damage.
Reboot to TWRP.
Go to Wipe.
Choose Advance Wipe.
Check on Data and change file system to EXT4, will not ever boot with F2FS.
Wipe cache, data, dalvik and system.
Flash the rom.
Reboot and have fun then.
Working:
Audio.
Bluetooth.
Camera: it's fully works with stock or other apps .
Display.
Graphis: both gralloc & hwcomposer.
Lights.
NFC.
RIL.
Sensors.
Storages.
Wifi
Bugs:
Dual sim might will not work all variants, so don't waste your time by asking me to fix it since my device is Single Sim.
You don't like it?, easy revert to Emui 5.x.
Downloads:
**13/05/2018**
pa_hi6250-7.3.1-EOL-20180513.zip|500.4 MB
Changelogs:
**13/05/2018**
Boot with F2FS without problems.
Fix Magisk.
Source Code:
Device Tree:
https://github.com/hak86/android_device_huawei_hi6250
Kernel GPL:
https://github.com/hak86/android_kernel_huawei_hi6250_4.1
Vendors:
https://github.com/hak86/android_vendor_huawei_hi6250
XDA:DevDB Information
AOSPA Paranoid for Hi6250, ROM for the Honor 8 Lite
Contributors
haky 86, haky 86
Source Code: https://github.com/hak86/
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 4.x
ROM Firmware Required: Emiui 5.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 7.3.1
Stable Release Date: 2018-02-09
Created 2018-02-09
Last Updated 2018-02-09

** Note **
How to Install the ROM?
* reboot to TWRP.
* go to Wipe -> Advanced Wipe.
* check Data -> Change file system -> select EXT4.
* swipe the screen to wipe it .
How can I fix Sim?
* go to Settings -> Extras -> disable "Sim Card Slot2 " and reboot.
How can I enable Google Codecs
* go to Settings -> Extras -> enable "Use Google H264" (it's a bit laggy but better than nothing).
How to enable Double Touch To Wake?
* go to Settings -> Extras -> enable "Double Touch to Wake"
Should I reflash the vendor partition if come from other roms?
* if you coming from Emui 5.x, the answer is no because the custom rom are based on Emui 5.0 source code, so all you
have to is flashing your favorite custom rom
Audio and camera are not working?
* bring up a logcat to help us, instead of writing useless comments.
I got error 7, how can I fix that?
* use my own TWRP recovery.

Good to see you in the Honor 8 Lite forum ?

Works on pra-lx1c432? Which twrp to use?

pbarbosa said:
Works on pra-lx1c432? Which twrp to use?
Click to expand...
Click to collapse
yes, my phone is pra-lx1 c432 too
can work on any hi6250!

haky 86 said:
Paranoid Android is a custom ROM aiming to extend the system, working on enhancing the already existing beauty of Android and following the same design philosophies that were set forward by Google for Android Open Source Project.
Code:
* Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Compatible device?:
Code:
[LIST]
[*]All devices that use hi6250 chipset and use kernel 4.1.
[/LIST]
Mandatory:
* hit thank buttons, it's free.
* want more roms for P8 Lite 2017/P9 Lite 2017, simply bring me up beers by the following button.
Requirements:
TWRP.
Unlocked bootloader.
Unlocked FRP.
vendor.img: you must be on stock one, so don't wipe it because with other custom vendor.img will never ever boot.
Installation Guide:
Make sure to the stock backup saved on pc, I'm not responsible for any bricked or damage.
Reboot to TWRP.
Go to Wipe.
Choose Advance Wipe.
Check on Data and change file system to EXT4, will not ever boot with F2FS.
Wipe cache, data, dalvik and system.
Flash the rom.
Reboot and have fun then.
Working:
Audio.
Bluetooth.
Camera: it's fully works with stock or other apps .
Display.
Graphis: both gralloc & hwcomposer.
Lights.
NFC.
RIL.
Sensors.
Storages.
Wifi
Bugs:
Dual sim might will not work all variants, so don't waste your time by asking me to fix it since my device is Single Sim.
You don't like it?, easy revert to Emui 5.x.
Downloads:
**09/02/2018**
pa_hi6250-7.3.1-EOL-20180208.zip
Changelogs:
**09/02/2018**
Initial build
Source Code:
Device Tree:
https://github.com/hak86/android_device_huawei_hi6250
Kernel GPL:
https://github.com/hak86/android_kernel_huawei_hi6250_4.1
Vendors:
https://github.com/hak86/android_vendor_huawei_hi6250
XDA:DevDB Information
AOSPA Paranoid for Hi6250, ROM for the Honor 8 Lite
Contributors
haky 86, haky 86
Source Code: https://github.com/hak86/
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 4.x
ROM Firmware Required: Emiui 5.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 7.3.1
Stable Release Date: 2018-02-09
Created 2018-02-09
Last Updated 2018-02-09
Click to expand...
Click to collapse
Can u share some screenshots

liboct87 said:
Can u share some screenshots
Click to expand...
Click to collapse
Click on "Screenshots" tab under the title, please do not quote entire op thanks.

haky 86 said:
yes, my phone is pra-lx1 c432 too
can work on any hi6250!
Click to expand...
Click to collapse
Which twrp should i use?
I flashes elitetwrp but i cant Change to ext4. It gaves me error.

pbarbosa said:
Which twrp should i use?
I flashes elitetwrp but i cant Change to ext4. It gaves me error.
Click to expand...
Click to collapse
this one, I'll update the second post to let others get it
https://basketbuild.com/devs/haky86/HuaweiP8Lite2017/TWRP
already have more +645 downloads!

is your lineage version stable or not ?

Downloading !
Regards !

jeuxtype said:
is your lineage version stable or not ?
Click to expand...
Click to collapse
Why don't you ask that in the proper thread? And yes, it is

rubentkato77 said:
Downloading !
Regards !
Click to expand...
Click to collapse
Did you try it yet? How's battery life comparing to pure AOSP?

haky 86 said:
yes, my phone is pra-lx1 c432 too
can work on any hi6250!
Click to expand...
Click to collapse
Everything working fine now. The ril sinal not as strong as stock One but ok. There is no auto brightness though. Its a bug or impossibility?
Thanks a lot

pbarbosa said:
Everything working fine now. The ril sinal not as strong as stock One but ok. There is no auto brightness though. Its a bug or impossibility?
Thanks a lot
Click to expand...
Click to collapse
I'll check in next build thanks for notification!

F2FS working on my honor 6x with your aospa,you need to change data to ext4 then reboot recovery and change data to f2fs and reboot system
Sent from my Honor 6X using Tapatalk
---------- Post added at 01:49 PM ---------- Previous post was at 01:42 PM ----------
haky 86 said:
I'll check in next build thanks for notification!
Click to expand...
Click to collapse
F2fs working bro
Sent from my Honor 6X using Tapatalk

arshilhonor6x said:
F2FS working on my honor 6x with your aospa,you need to change data to ext4 then reboot recovery and change data to f2fs and reboot system
Sent from my Honor 6X using Tapatalk
Click to expand...
Click to collapse
glad to hear that, on my device (pra-lx1) is required to use ext4 to complete boot.

haky 86 said:
glad to hear that, on my device (pra-lx1) is required to use ext4 to complete boot.
Click to expand...
Click to collapse
Did u followed steps I mentioned above
Sent from my Honor 6X using Tapatalk
---------- Post added at 02:03 PM ---------- Previous post was at 01:51 PM ----------
ROM is nice smooth and responsive
Sent from my Honor 6X using Tapatalk

** Note **
**11/02/2018**
pa_hi6250-7.3.1-EOL-20180210.zip
Changelogs:
**11/02/2018**
possible fix for ril crashes

wonderful rom but when i tap carriers codes in my dialer they don't show up.

[ROM][OFFICIAL][9.0.0][violet] LineageOS 16.0 [WrappedKey-FBE]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 9 (pie), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
Boots
RIL (Calls, SMS, Data)
Fingerprint
Wi-Fi
Bluetooth
IR camera
Camera
Camcorder
Video Playback
Audio
Sensors
Flash
LED
GPS/GNSS
VoLTE
Known issues:
You tell me (None)
Instructions :
You need a PC with ADB & Fastboot available
Download recovery
Reboot to fastboot
Run: fastboot flash recovery recovery_twistloop.img
Press volume & power up until you see TWRP logo
Enter your password (if it prompts)
Go to Wipe
Click on Format Data -> Yes
Go back and select Advanced Wipe
Select system & cache and press wipe
Go back (press back twice)
Select “Advanced”, “ADB Sideload”, then swipe to begin sideload.
On the host machine, sideload the package using: adb sideload filename.zip (Replace filename with actual filename)
You may flash OpenGapps and or Magisk
Reboot
Note: If you're unable to download Netflix or some other app from Play Store and or if you're unable to use Widevine L1, please consider flashing Magisk. However, if you flash Magisk, your support tickets won't be entertained.
Downloads :
TWRP : Here
NOTE: THIS TWRP is based on WrappedKey-FBE. If you use ANY OTHER TWRP other then aforementioned, it has chances of having issues which won't be looked into.
Official Build : Here
Firmware : Here
Credits:
Eddie Morceri
Nolen Johnson
Rashed Abdel-Tawab
Ashwin RC
Moshe Barash
Marc "ThE_MarD" Bourgoin
Amulya Bhardwaj
Peter Cai
Lineage Team
AospExtended Team
Wang Han
XDA:DevDB Information
LineageOS, ROM for the Xiaomi Redmi Note 7 Pro
Contributors
xdatman
Source Code: https://github.com/LineageOS/android_kernel_xiaomi_violet
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: >= 9.5.14/Latest (Global/China) Stable/Latest (Global/China) Beta
Based On: AOSP
Version Information
Status: Stable
Created 2019-07-25
Last Updated 2019-07-25

Note: If you're facing issue which reads "Verification failed" please sideload the [URL="https://mirrorbits.lineageos.org/full/violet/20190728/lineage-16.0-20190728-nightly-violet-signed.zip]28th July build[/URL] and your issue will be resolved. This happens due to vintf verification in the updater app which required a patch to pass.

Thank you Atman Sir
Thank you for making our devices perfect.
I never thought Violet will get Official Lineage OS let alone this early.
You Sir are breathtaking !!
:highfive:

Waiting for it from a long time
---------- Post added at 09:30 AM ---------- Previous post was at 09:16 AM ----------
It says no build available

@xdatman u have mentioned required firmware as 9.5+. That comes in beta firmware category. But the link u have provided for firmware is 10.3.9 which is a stable firmware. Which one to flash?

Vishal P said:
@xdatman u have mentioned required firmware as 9.5+. That comes in beta firmware category. But the link u have provided for firmware is 10.3.9 which is a stable firmware. Which one to flash?
Click to expand...
Click to collapse
Flash the latest Global Beta/Global Stable and you should be GTG.

navi_58861170 said:
Waiting for it from a long time
---------- Post added at 09:30 AM ---------- Previous post was at 09:16 AM ----------
It says no build available
Click to expand...
Click to collapse
If you can read properly I've mentioned will be up soon.
The reason is because all the builds are done on a (single) server so it takes time for each device to compile.
Wait for it.
Should be up in 10-12h.

for those wondering where is build ?
Here it is ,
Everyday they build from device code names A to Z.
Violet is V so will take little time.
Meanwhile you can watch each build being compiled here -
https://builds.lineageos.org/
Violet will be on page 3 or 4.
Enjoy , and don't forget to thank developer for his hard work.

Coming Thanks

LOS is here

Does this LOS rom support wrappedkey encryption?

OrcaXS said:
Does this LOS rom support wrappedkey encryption?
Click to expand...
Click to collapse
Yes even I wanna know? Because most cases we use Peter twrp and only wrappedkey os works?

Thanks for the greatest rom
Finally, ancestor of custom roms is official for violet.

Nilesh Jaybhaye said:
Here it is ,
Everyday they build from device code names A to Z.
Violet is V so will take little time.
Meanwhile you can watch each build being compiled here -
https://builds.lineageos.org/
Violet will be on page 3 or 4.
Enjoy , and don't forget to thank developer for his hard work.
Click to expand...
Click to collapse
Thanks for giving such a nice info

CHETAN9 said:
Yes even I wanna know? Because most cases we use Peter twrp and only wrappedkey os works?
Click to expand...
Click to collapse
My TWRP is based on Wrappedkey, use my twrp ONLY or else don't tell me if you're having issues with OTA.

xdatman said:
My TWRP is based on Wrappedkey, use my twrp ONLY or else don't tell me if you're having issues with OTA.
Click to expand...
Click to collapse
Sir aex when?

xdatman said:
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 9 (pie), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
Boots
RIL (Calls, SMS, Data)
Fingerprint
Wi-Fi
Bluetooth
IR camera
Camera
Camcorder
Video Playback
Audio
Sensors
Flash
LED
GPS/GNSS
VoLTE
Known issues:
You tell me (None)
Instructions :
You need a PC with ADB & Fastboot available
Download recovery
Reboot to fastboot
Run: fastboot flash recovery recovery_twistloop.img
Press volume & power up until you see TWRP logo
Enter your password (if it prompts)
Go to Wipe
Click on Format Data -> Yes
Go back and select Advanced Wipe
Select system & cache and press wipe
Go back (press back twice)
Select “Advanced”, “ADB Sideload”, then swipe to begin sideload.
On the host machine, sideload the package using: adb sideload filename.zip (Replace filename with actual filename)
You may flash OpenGapps and or Magisk
Reboot
Downloads :
TWRP : Here
NOTE: THIS TWRP is based on WrappedKey-FBE. If you use ANY OTHER TWRP other then aforementioned, it has chances of having issues which won't be looked into.
Official Build : Here (Will be up soon)
Firmware : Here
XDA:DevDB Information
LineageOS, ROM for the Xiaomi Redmi Note 7 Pro
Contributors
xdatman
Source Code: https://github.com/LineageOS/android_kernel_xiaomi_violet
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: >= 9.5.14/Latest (Global/China) Stable/Latest (Global/China) Beta
Based On: AOSP
Version Information
Status: Stable
Created 2019-07-25
Last Updated 2019-07-25
Click to expand...
Click to collapse
Build is failed

lazybee said:
Will it be arriving anytime soon?
Click to expand...
Click to collapse
There were 3 unmerged patches, those have been merged now.

Thank you very much for your work!
We are waiting for the build.

xdatman said:
There were 3 unmerged patches, those have been merged now.
Click to expand...
Click to collapse
Thanks for the reply.

[X00P][msm8937] LineageOS 17.1 [UNOFFICIAL][15/12/2020]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What's working:
Boots
RIL (Calls, SMS, Data)
Wi-Fi
Bluetooth
Camera
Video Playback
Audio (Record and Playback)
Sensors
Notification LED
Fingerprint
What's not working:
Permissive
Instructions:
Before installing ROM Zip make sure to flash latest pie firmware WW-16.00.1906.411
If not then download & flash latest pie beta first from here FIRMWARE-ASUS_X00P-WW-16.00.1906.411-user.zip.
Installation:
Download & Place ROM & Gapps in your internal storage/virtual SD
Boot into TWRP
Wipe System, Vendor, Data, Dalvik, Cache.
Flash the ROM and GApps.
Reboot and Enjoy.
Downloads:
Click Here To Download
Gapps : https://opengapps.org/ (ARM64 10.0 Nano Recommended)
Reporting bugs:
Grab a logcat right after the problem has occurred (please include at least a few pages of the log, not just the last few lines, unless you know what you're doing).
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.
Credits:
@shaikh lukman for teaching about Android Development
@trkzmn for rebasing kernel source for pie
@saalimsam for helping
Alok, Nitin, Murugan, Shashwat, Hudson Samuel and others for testing
to whom i forgot
Kernel: https://github.com/raza231198/android_kernel_asus_X00P
XDA:DevDB Information
LineageOS, ROM for the Asus Zenfone Max
Contributors
raza231198
Source Code: https://github.com/LineageOS
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: WW-16.00.1906.411
Version Information
Status: Beta
Current Beta Version: 17.1
Beta Release Date: 2020-04-23
Created 2020-02-08
Last Updated 2020-07-16

Click Here To Download
Changelogs
• 15/12/2020
December Security Patch
Clang Kernel
• 23/04/2020
Lineage 17.1
Update blobs from LA.UM.8.6.2.r1-06600-89xx.0
Pass Safety Net
More I forgot
• 08/02/2020
Initial Build

Reserved

Hi!
Great work! Flashed here and almost everything is working fine!
The only problem I encountered is that the fingerprint isn't working. Do you know how to fix it?
Another thing is that the second rear camera won't work with default camera app, but it will with Asus Camera apk.
Thanks for the ROM!

matheusoj said:
Hi!
Great work! Flashed here and almost everything is working fine!
The only problem I encountered is that the fingerprint isn't working. Do you know how to fix it?
Another thing is that the second rear camera won't work with default camera app, but it will with Asus Camera apk.
Thanks for the ROM!
Click to expand...
Click to collapse
Provide Log Plox

raza231198 said:
Provide Log Plox
Click to expand...
Click to collapse
Sorry. I was just testing the ROM and didn't save the log. I allready restored the stock rom.

Are X00P, and X00PD, the same thing?, Los 16.0 on my X00PD doesn't boot.

mariocaraf said:
Are X00P, and X00PD, the same thing?, Los 16.0 on my X00PD doesn't boot.
Click to expand...
Click to collapse
May be you wiped vendor too :/

raza231198 said:
May be you wiped vendor too :/
Click to expand...
Click to collapse
no,i wiped system ,dalvik,cache and data,after i flashed the system.img.
i didn't install gapps was needed?

mariocaraf said:
no,i wiped system ,dalvik,cache and data,after i flashed the system.img.
i didn't install gapps was needed?
Click to expand...
Click to collapse
No :/

raza231198 said:
No :/
Click to expand...
Click to collapse
when updating build with custom vendor

saalimsam said:
when updating build with custom vendor
Click to expand...
Click to collapse
Wen fixing bugs :/

Thanks raza231198 and all the developers for this custom ROM. It works nicely for me, much better than the stock ROM in a lot of respects, thank you for all the work you put into this!
I have one issue though. When I connect to a PC through USB, I have trouble transferring files. When I connect the phone, and I tap the USB preferences setting, I get a screen where I see options for using USB for file transfer, MIDI, or no data transfer, but all the options are greyed out, and nothing happens when I tap on them. See screenshot:
https://photos.app.goo.gl/baRu9Y5D2pWEc3ok9
I wonder if I'm doing something wrong. I found a workaround which is that in the general settings, I can choose file transfer to be the default choice for any device that I connect to. However, that's not quite secure.
What are your thoughts?
I'm also happy to work as tester if you need more reports on anything.
Have a beautiful day!
---------- Post added at 06:21 PM ---------- Previous post was at 06:19 PM ----------
Also, in case this is useful to people, I wrote up a step-by-step guide how to install this, basically starting from the phone as it is when it comes from store.
https://florisvanvugt.wordpress.com...om-on-asus-zenfone-max-m1-zb555kl-x00p-x00pd/

florisvanvugt said:
Thanks raza231198 and all the developers for this custom ROM. It works nicely for me, much better than the stock ROM in a lot of respects, thank you for all the work you put into this!
I have one issue though. When I connect to a PC through USB, I have trouble transferring files. When I connect the phone, and I tap the USB preferences setting, I get a screen where I see options for using USB for file transfer, MIDI, or no data transfer, but all the options are greyed out, and nothing happens when I tap on them. See screenshot:
https://photos.app.goo.gl/baRu9Y5D2pWEc3ok9
I wonder if I'm doing something wrong. I found a workaround which is that in the general settings, I can choose file transfer to be the default choice for any device that I connect to. However, that's not quite secure.
What are your thoughts?
I'm also happy to work as tester if you need more reports on anything.
Have a beautiful day!
---------- Post added at 06:21 PM ---------- Previous post was at 06:19 PM ----------
Also, in case this is useful to people, I wrote up a step-by-step guide how to install this, basically starting from the phone as it is when it comes from store.
https://florisvanvugt.wordpress.com...om-on-asus-zenfone-max-m1-zb555kl-x00p-x00pd/
Click to expand...
Click to collapse
my phone is 8917 with 3 ghz ram, in the forum I read 2 models, 8917 2 ghz ram and 8937 3 ghz ram, is this the reason for the brick, after installation of lineageos?
is it a variant only for Italy?

mariocaraf said:
my phone is 8917 with 3 ghz ram, in the forum I read 2 models, 8917 2 ghz ram and 8937 3 ghz ram, is this the reason for the brick, after installation of lineageos?
is it a variant only for Italy?
Click to expand...
Click to collapse
It's only for msm8937

florisvanvugt said:
Thanks raza231198 and all the developers for this custom ROM. It works nicely for me, much better than the stock ROM in a lot of respects, thank you for all the work you put into this!
I have one issue though. When I connect to a PC through USB, I have trouble transferring files. When I connect the phone, and I tap the USB preferences setting, I get a screen where I see options for using USB for file transfer, MIDI, or no data transfer, but all the options are greyed out, and nothing happens when I tap on them. See screenshot:
https://photos.app.goo.gl/baRu9Y5D2pWEc3ok9
I wonder if I'm doing something wrong. I found a workaround which is that in the general settings, I can choose file transfer to be the default choice for any device that I connect to. However, that's not quite secure.
What are your thoughts?
I'm also happy to work as tester if you need more reports on anything.
Have a beautiful day!
---------- Post added at 06:21 PM ---------- Previous post was at 06:19 PM ----------
Also, in case this is useful to people, I wrote up a step-by-step guide how to install this, basically starting from the phone as it is when it comes from store.
https://florisvanvugt.wordpress.com...om-on-asus-zenfone-max-m1-zb555kl-x00p-x00pd/
Click to expand...
Click to collapse
Working for custom vendor so can't fix bugs now

raza231198 said:
It's only for msm8937
Click to expand...
Click to collapse
write it in the first post!

raza231198 said:
Code:
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
LineageOS is a free, community built, aftermarket firmware distribution of Android 9.0.x (Pie), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What's working:
Boots
RIL (Calls, SMS, Data)
Wi-Fi
Bluetooth
Camera
Video Playback
Audio (Record and Playback)
Sensors
Permissive
What's not working:
SIM2 Data
Fingerprint
Notification LED
Front LED
Instructions:
Before installing ROM Zip make sure your running latest pie stable firmware WW-16.00.1906.411
If not then download & flash latest pie beta first from here WW-16.00.1906.411.zip.
Installation:
Download & Place ROM & Gapps in your internal storage/virtual SD
Boot into TWRP
Wipe System, Data, Dalvik, Cache.
Don't Wipe Vendor
Flash the ROM and GApps.
Reboot and Enjoy.
Downloads:
Click Here To Download
Gapps : https://opengapps.org/ (ARM64 9.0 Nano Recommended)
Reporting bugs:
Grab a logcat right after the problem has occurred (please include at least a few pages of the log, not just the last few lines, unless you know what you're doing).
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.
Credits:
@shaikh lukman for teaching about Android Development
@trkzmn for rebasing kernel source for pie
@saalimsam for helping
Alok, Nitin, Murugan, Shashwat, Hudson Samuel and others for testing
to whom i forgot
Kernel: https://github.com/raza231198/android_kernel_asus_X00P
XDA:DevDB Information
LineageOS, ROM for the Asus Zenfone Max
Contributors
raza231198, saalimsam, trkzmn
Source Code: https://github.com/LineageOS
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: WW-16.00.1906.411
Version Information
Status: Beta
Current Beta Version: 16.0
Beta Release Date: 2020-02-08
Created 2020-02-08
Last Updated 2020-02-18
Click to expand...
Click to collapse
Great work,, I hope now we can see new Roms Fro this device..

New Build is Up
Click Here To Download
Changelogs
• 23/04/2020
Lineage 17.1
Update blobs from LA.UM.8.6.2.r1-06600-89xx.0
Pass Safety Net
More I forgot

mariocaraf said:
no,i wiped system ,dalvik,cache and data,after i flashed the system.img.
i didn't install gapps was needed?
Click to expand...
Click to collapse
Can you send dmesg log for your device?

Database Info

welcome